Using the default Sysprep and Capture template fails on reboot with BOD UNMOUTABLE_BOOT_VOLUME

On a 2012 r2 server with MDT 2012 I am using the default template to capture a Win 8.1 64 bit master image to deploy to 60 Dell e7440 laptops. When I start the cscript litetouch.wsf thru command prompt, the litetouch wizards starts sysprep starts to
work and when it goes to reboot BOD UNMOUTABLE_BOOT_VOLUME.
The only way around the BOD is to PXE boot to the deployment server and LiteTouch continues to create WIM but fails. Click finish and the laptop boots as if it was the first time so sysprep worked.
Any help is appreciated.

Here is the process prior to rebooting.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\>cscript \\deploy2012\deploymentshare$\scripts\litetouch.wsf
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Property LogPath is now = C:\MININT\SMSOSD\OSDLOGS
Microsoft Deployment Toolkit version: 6.2.5019.0
Property Debug is now = FALSE
ZTIUtility!GetAllFixedDrives (False)
New ZTIDisk : \\DSISPA-CAGN2QU\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYS
ICALDRIVE0"
New ZTIDisk : \\DSISPA-CAGN2QU\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYS
ICALDRIVE0"
New ZTIDiskPartition : \\DSISPA-CAGN2QU\root\cimv2:Win32_DiskPartition.DeviceID
="Disk #0, Partition #2"    \\DSISPA-CAGN2QU\root\cimv2:Win32_LogicalDisk.Devic
eID="C:"
New ZTIDisk : \\DSISPA-CAGN2QU\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYS
ICALDRIVE0"
New ZTIDiskPartition : \\DSISPA-CAGN2QU\root\cimv2:Win32_DiskPartition.DeviceID
="Disk #1, Partition #0"    \\DSISPA-CAGN2QU\root\cimv2:Win32_LogicalDisk.Devic
eID="D:"
New ZTIDisk : \\DSISPA-CAGN2QU\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYS
ICALDRIVE1"
ZTIUtility!GetAllFixedDrives =    C:
No task sequence is in progress.
Found OS Disk: C:
Found FirstPossibleSystemDrive: C:
Property SMSTSLocalDataDrive is now = C:
Not running within WinPE.
Property DeploymentMethod is now = UNC
DeploymentMethod = UNC
Property DeployRoot is now = \\deploy2012\deploymentshare$
Validating connection to \\deploy2012\deploymentshare$
Mapping server share: \\deploy2012\deploymentshare$
Already connected to server deploy2012 as that is where this script is running f
rom.
Mapped Network UNC Path Z: = \\deploy2012\deploymentshare$
DeployRoot = \\deploy2012\deploymentshare$
Property DeployDrive is now = Z:
DeployDrive = Z:
Property PHASE is now = VALIDATION
Property DeploymentType is now = REFRESH
Phase = VALIDATION
About to run command: wscript.exe "\\deploy2012\deploymentshare$\scripts\ZTIGath
er.wsf" /inifile:Bootstrap.ini
Command completed, return code = 0
Validating connection to \\DEPLOY2012\DeploymentShare$
Mapping server share: \\DEPLOY2012\DeploymentShare$
Already connected to server DEPLOY2012 as that is where this script is running f
rom.
Found Existing UNC Path Z: = \\DEPLOY2012\DeploymentShare$
About to run command: wscript.exe "\\deploy2012\deploymentshare$\scripts\ZTIGath
er.wsf" /nolocalonly
Command completed, return code = 0
Validating connection to \\DEPLOY2012\DeploymentShare$
Mapping server share: \\DEPLOY2012\DeploymentShare$
Already connected to server DEPLOY2012 as that is where this script is running f
rom.
Found Existing UNC Path Z: = \\DEPLOY2012\DeploymentShare$
Property LTIDirty is now = TRUE
About to run command: MSHTA.exe "\\DEPLOY2012\DeploymentShare$\Scripts\Wizard.ht
a" /definition:DeployWiz_Definition_ENU.xml
Command completed, return code = 0
Validating connection to \\DEPLOY2012\DeploymentShare$
Mapping server share: \\DEPLOY2012\DeploymentShare$
Already connected to server DEPLOY2012 as that is where this script is running f
rom.
Found Existing UNC Path Z: = \\DEPLOY2012\DeploymentShare$
Property DeployDrive is now = Z:
DeployDrive = Z:
Property ResourceRoot is now = \\DEPLOY2012\DeploymentShare$
DeploymentType = CUSTOM
ResourceRoot = \\DEPLOY2012\DeploymentShare$
Property ResourceDrive is now = Z:
ResourceDrive = Z:
Property _SMSTSPackageName is now = Lite Touch Installation
SMS Task Sequencer found at \\DEPLOY2012\DeploymentShare$\Tools\X64, copying to
C:\MININT\Tools\X64
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\CcmCore.dll to C:\MININT\Tools\X
64\CcmCore.dll
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\CcmUtilLib.dll to C:\MININT\Tool
s\X64\CcmUtilLib.dll
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\Smsboot.exe to C:\MININT\Tools\X
64\Smsboot.exe
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\SmsCore.dll to C:\MININT\Tools\X
64\SmsCore.dll
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\TsCore.dll to C:\MININT\Tools\X6
4\TsCore.dll
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\TSEnv.exe to C:\MININT\Tools\X64
\TSEnv.exe
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\TsManager.exe to C:\MININT\Tools
\X64\TsManager.exe
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\TsmBootstrap.exe to C:\MININT\To
ols\X64\TsmBootstrap.exe
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\TsMessaging.dll to C:\MININT\Too
ls\X64\TsMessaging.dll
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\TsProgressUI.exe to C:\MININT\To
ols\X64\TsProgressUI.exe
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\TSResNlc.dll to C:\MININT\Tools\
X64\TSResNlc.dll
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\xprslib.dll to C:\MININT\Tools\X
64\xprslib.dll
Copying \\DEPLOY2012\DeploymentShare$\Tools\X64\00000409\tsres.dll to C:\MININT\Tools\X64\00000409\tsres.dll
Copying \\DEPLOY2012\DeploymentShare$\Control\WIN8MASTER-V2\TS.XML to C:\MININT\Tools\X64
Copying C:\MININT\SMSOSD\OSDLOGS\VARIABLES.DAT to C:\MININT\Tools\X64\VARIABLES.
DAT
LTI beginning deployment
Event 41016 sent: LTI beginning deployment
About to run command: "C:\MININT\Tools\X64\TsmBootstrap.exe" /env:SAStart
Property LTIDirty is now = TRUE
New window pops up... Generalize phase sysprep plugins...
Then reboots, it starts loading files before the BOD

Similar Messages

Use the default format and partition step to format disk0 partition 1 in multiple disks sutiation

As we know,we need to disable the default format and partition step in ts to let mdt deploy os on C and leave the other partitions stay safe when there is only one disk on pc，and the way of installing operation system is logical drive letter store in a varible.
But what if there are 2 disks on pc，and for a record the disk 0 is always the OS disk,don't need to confirmed this.How can we modify the format and partition step to format only C on disk0 under this condition?then lead the mdt to do the rest deployment
by itself.
Thanks

You are pushing up against the design limits of MDT, and the more complex and/or arbitrary the disk configuration the harder it is for MDT to perform installations.
If you want to maintain the *existing* disk configuration, and just update the OS present, then the recommended course of action is to run MDT from *within* the OS (cscript.exe
\\server\deploymentshare$\scripts\litetouch.vbs), not from WinPE. When you do this, it's called a "refresh" scenario. MDT can capture the user files via USMT, and it knows which
partitions to use, because it's launched from within the OS itself.
Disabling the default Format and Partition step has other unintended consequences.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Trying to recover my HP dv4-1543sb using the recovery disks and it has failed 3 times. What now?

I'm getting the message
"Recovery Manager could not restore your computer using the factory image. Please contact HP Support. Error code 0xe0ef0003'.

Enter the bios, hold F10 down while powering up, keep holding F10 until the bios loads, in there you will find hard drive and memory diagnostics, run both of the extended tests, post back any error codes.

Sysprep and Capture Task Sequence Fails "Can not find script file C:\LTIBootstrap.vbs"

I've just installed Windows 8 on a Lenovo ThinkPad T440s using Lenovo's recovery discs. I did not join it to a domain. I logged in as Administrator, navigated to our deployment share, and ran Scripts\LiteTouch.wsf. I selected the new Sysprep and Capture
Task Sequence that I just made, told it to upload to DeploymentShare$\Captures, then started the Task Sequence.
It seemed to run fine until after the first reboot. Windows 8 configured the PC for a while, then displayed an error that it had been shut down unexpectedly. I wasn't sure if this was normal, so I just clicked OK. Then I got an error that said "Can
not find script file C:\LTIBootstrap.vbs". After clicking OK on that, I am brought to the desktop.
The image cannot be found in DeploymentShare$\Captures. Under the Monitoring section of the DeploymentWorkbench, I can see that MDT thinks the Task Sequence is still running on the machine (though it is not), with progress stuck on step 16 of 23: Execute
Sysprep. There are 0 errors and 0 warnings listed.
BDD.log is too long to post all of it, but here's the last few lines in case that's helpful.
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Run Command: C:\windows\SYSTEM32\bcdedit.exe /default {d22e7e91-9ee7-46eb-89d7-c5859e4302f0}]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property BootPE is now = True]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41019 sent: LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
I would greatly appreciate any assistance determining what went wrong and how to correct it. Thank you.

You might get teh c:\LTIBootStrap.vbs error if you are running SysPrep with a unattend.xml template that contains the c:\bootstrap.vbs template, yet you are *NOT* deploying the image with MDT Litetouch, instead just applying the image to the final machine.
Crack open your install.wim file and search for the unattend.xml file in the normal places to see what it is.
I am concerned about the "shut down unexpectedly" error. There should be no shutdown state information left from a captured *.wim file.
If you still need assistance, please feel free to copy the bdd.log file to a public site like OneDrive, and share the link.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Administrator Account Disabled after sysprep and capture task sequence in MDT 2010

Hi
We are currently migrating from Windows XP to windows 7. As part of our migration we have 5 base Images (for different areas of the business)
Here is what we are doing:
Create a reference machine with the source files for windows 7 Pro x86
Install applications as part of the Task sequence to build a reference machine.
Make the updates to the machine - required for the build.
Run the Sysprep and capture template to take the capture of the Reference machine.
Import the Capture into the Operating system folder within MDT2010
Create a task sequecne to deploy the image.
Deploy the Image for Testing.
Deploy the image to a machine
Update the machine with the defects
Re Capture the deployed machine and call it ver2.wim
re deploy ver2.wim
Testers test
Defects logged + additional user settings to be captured in the build
Re capture and sysprep runs says the capture has been succesful however after a reboot the administrator account is disabled.
We cant seem to capture anything from here on in. Nothing has been changed in the unattend.
Autologon is set to enable the administrator account and the password is set to blank as this is then handled by policy when the machine is joined to the domain - we have not enabled the unattended join to the domain at this point in time but it will be
for deploying the image.
Have we got our image strategy wrong? does the same rule apply about sysprep running more than 3 times on a single machine if it is captured and redeployed after a sucessfully sysprep to the same hardware or even different hardware.

Hi,
    One of the things Sysprep/WAIK do is disable the adminsitrator account.
    You mentioned that you are setting the autologing to the administrator account and that you are setting it with a blank password, you can add a simple command in to sysprep's xml to reenable the account:
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Path>net user administrator /active:yes</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
   Give it a try and let us know .
Best Regards, Marianok
Saludos, MarianoK
Disclaimer: While I do my best to make sure everything I post is accurate and safe, I’m certainly not perfect so all this information is provided "AS IS" with no warranties or guarantees and confers no rights. Any suggested steps or code provided should be
done under your own risk, I take no responsibilities if your system blows, the universe stops spinning, o nor for any other adverse consequence the information on this code might cause directly or indirectly.
Aclaración: Aunque hago lo posible por verificar que todo lo que posteo es correcto y seguro, Yo ciertamente no soy perfecto y puedo cometer errores, por lo tanto esta informacion es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún
derecho. Cualquier instrucción descripta o código incluido deben ser empleados bajo su propia responsabilidad y bajo su propio riesgo. No me hago responsable si sus datos se dañan, su si
Hi Marianok,
Thanks for your response and taking the time to read the topic we have raised. We believe we already have this step in place but perhaps we have it in the wrong area of the unattend.
Please find below our unattend file for the capture:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
<InstallFrom>
<Path>.\Operating Systems\Windows 7 Install Media x86\Sources\install.wim</Path>
<MetaData>
<Key>/image/index</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<UpgradeData>
<Upgrade>false</Upgrade>
</UpgradeData>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
<ProductKey>
<Key></Key>
</ProductKey>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username></Username>
<Domain></Domain>
<Password></Password>
</Credentials>
<JoinDomain></JoinDomain>
<JoinWorkgroup></JoinWorkgroup>
<MachineObjectOU></MachineObjectOU>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName></ComputerName>
<ProductKey></ProductKey>
<RegisteredOrganization>OurCompanyNameHere</RegisteredOrganization>
<RegisteredOwner>Windows User</RegisteredOwner>
<TimeZone></TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>QQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Description>Temp account</Description>
<DisplayName>Temp account</DisplayName>
<Group>Users</Group>
<Name>TempAccount</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain></Domain>
<Password>
<Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe C:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe D:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>2</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe E:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>3</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe F:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>4</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<SkipUserOOBE>true</SkipUserOOBE>
</OOBE>
<RegisteredOrganization>Ourcomapanynamehere</RegisteredOrganization>
<RegisteredOwner>Windows User</RegisteredOwner>
<TimeZone></TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog://pr-dep-03/captureshare$/operating systems/windows 7 install media x86/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Hope this helps!

GetContextURL returns null using the default ECM repository

Hello experts,
This is the scenario.
We are using the SAP ECM repositoy for document storage in our BPM proyect. In this case we are using the default configuration and repository location (ecm/default and DefaultUser), but after the upload, when i try to get the document URL with the method getContentURL(), returns null.
The ECM documentarion saids than this condition is expected when using a third party repostiory, but this is not the case.
I appreciate a lot your advices and recomendations,
Best regards!
Julio C. Leyva

Hi Vasil,
We didn't resolve this issue by this method, because we are using the default ECM repository witch doesn't support the operation getContextURL() and gets the "null" result. If you are using a different repository maybe works.
Re-checking the API specification, saids:
getContentURL
java.lang.String getContentURL() throws InvalidStateException, RepositoryException Returns a URL that can be used to retrieve the content directly from the respective backend, thus bypassing ECM. Note that this URL might have several restrictions which depend on the connector's backend store, such as a limited lifetime or requiring a user to authenticate with different credentials than the ones used to connect to ECM. Other stores might provide no content URL at all, in which case this method returns null. Applications might want to consider utilizing the ECM WebDAV server to present their users a URL that is located on the same system as ECM.
Finally, you would consider to expose a webservice (EJB Session Bean) witch encapsulates the ECMI implementation and extract your file content as a binary array (encode/decode), sending as the input your path/fileName for lookup in the ECM repository.
Regards!

My hotmail, using Firefox is asking to use the default.aspx but accessing it using iexplore there is not problem

Trying to open my hotmail, Firefox is asking to use the default.aspx and once I have tried to save or downoladed always shows a message telling "... GWNju492.aspx.part could not be saved, because the source file could not be read. " but if I try to do the same thing using iexplore is working without any problem and I can read my email.

The Google Toolbar '''7.1.20110512W''' version works in Firefox 5.0 by using the Compatibility Reporter extension, I tried it myself due to the large number of postings about the GTB this morning. <br />
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/

Can't open a new tab in version 30.0 on my mac. I have no add-ons and use the default settings.

I tried removing any extensions (only had one), and am already using the default page settings. This occurred RIGHT after I upgraded to the newest version- 30.0. I don't have any add-ons either. So since this happened with your newest version and seems like a ton of people are having the same problem, it says to me that FIREFOX needs to find the cause, not lay it on us to figure a round-a-bout.
Also , I've had a problem that the tabs keeping reloading a ton of OLD tabs every time I restart or open a new window. The same ones, like 30 of them! Tried deleting cache, didn't work. ?

Hello,
This happens in safe mode?
*[http://mzl.la/MwuO4X Firefox in safe mode]
<hr>
# First show the hidden files and folders:
#*[http://windows.microsoft.com/en-us/windows/show-hidden-files Show hidden files (Windows Vista/7)]
#*[http://kb.mozillazine.org/Show_hidden_files_and_folders Show hidden files]
# Go to your profile folder:
#*[http://mzl.la/NYhKHH How do I find my profile?]
#*[http://kb.mozillazine.org/Profile_folder_-_Firefox]
# Close completely Firefox.
#*[http://kb.mozillazine.org/Kill_application]
# Delete or rename the '''localstore.rdf''' file.
# Restart Firefox.
*[http://kb.mozillazine.org/Localstore.rdf]
*[http://kb.mozillazine.org/Corrupt_localstore.rdf]
<hr>
Also:
*[http://mzl.la/MnSTZB Reset Firefox]
*[http://mzl.la/LL5Dxl Manage profiles]

I have tried to log in on a web site and this is what I'm gettig: Alert 530 Autentication failed. I have used the correct password and user's name.

ftp.oxbow.fr This is the file I have log on and I have used the correct password and user's name and this is what comes up:
Alert 530 Authentication Failed!

This is a user to user forum. Apple is not here. Apple does not answer questions here.
iTunes Support -
http://www.apple.com/support/itunes/
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Hi, i wanted to resize my windows partion. I was thinking of using the default backup system for windows. Then switching to mac partion, deleting the bootcamp and then restoring a new enlarged partion from the backup. Is this possible?

hi,
i wanted to resize my windows partition. I was thinking of using the default backup system for windows. Then switching to mac partion, deleting the bootcamp and then restoring a new enlarged partition from the backup. Is this possible?

I see youhave gotten recommendatons for using WinClone or CampTune. I have used both and they both work well.
You have asked about using the WIndows 7 utility to backup your drive and restor it onto a larger partition. I will tell you fro experience that this will probably not do what you want, and may do something that you don't want. You can use the Windows 7 native backup tool to make a backup of your Windows 7 partition. It will most liekly end-up making a dive image of the whole drive. When yourestore that backup, it will try to re-create teh partitions of exactly the same size as they were when the backup was taken, so it won't increase your partition size for you. Worse, since Windows doesn't natively know how to read./write HFS+ volumes, the backup will make a partition for your MacOS (replacing any you may have now), except that the copy restored by WIndows will be totally worthless, and you will not be able to boot MacOS from it, or even read it under MacOS.
Now I will tell you that I've also had some fairly good success working with the free tool CloneZilla. Since it hasn't been mentioned yet, and everything else mentioned does cost you money, I thought I would throw it out. CloneZilla is not as easy to use as the tools mentioned, but it has worked for me int hte past, so it is something to consider. I tend to use CampTune myself, but that was because I purchased a bundle deal for them and it was included in that deal.

Windows Could Not parse or process unattend answer file for pass [specialize] after WDT Litetouch 'sysprep and capture'

I setup an ACER VM6620G (Win7x86) how I wanted, including disabling the administrator account and creating an administrator user "PVA"
Navigated to \\wds\DeploymentShare$\Scripts and ran the litetouch script. Chose my "Sysprep and Capture" task.
Everything went off without a hitch until I restarted the technician pc.
I got the dreaded
"Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist"
I tried to deploy the captured image to the same computer and got the same error
I've scoured the internet for solutions (Shift+10 opens command prompt. Good to know!) with no luck.
I've saved the unattend.xml and looked for errors- going as far as to install an x86 Win7 virtual machine to validate the unattend.xml file in WISM
Other information that might be useful:
I never used WISM to create an unattend.xml nor did I attach one to the image.
I didn't try to copy user profiles/settings/migrate etc
I imported the captured image to WDT. Created a standard task and added 2 nodes
-Inject Drivers
-Install Application
As a side, I've got another image that I've already injected the drivers/installed the application as a test. Everything went smoothly.
+-----------------+
| Unattend.xml:
+-----------------+
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\10.0.0.1\deploymentshare$\Operating Systems\ACER Win7 x86 Capture\ACER Win7 x86 Capture.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<JoinWorkgroup>WORKGROUP</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>PVA-PC</ComputerName>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value></Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value></Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>

https://skydrive.live.com Here's the end of the log file:
2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info Also, here's my [Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
SkipDomainMembership=YES
DomainAdmin=Administrator
DomainAdminDomain=go.local
DomainAdminPassword=************
SkipTimeZone=YES
TimeZone="035"
TimeZoneName="Eastern SkipLocaleSelection=YES
KeyboardLocale=en-US
UserLocale=en-US
UILanguage=en-US
Bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\10.0.0.1\Dep UserID=Administrator
UserDomain=go.local
UserPassword=***********
KeyboardLocale=en-US
SkipAdminPassword=YES
SkipProductKey=YES
SkipBitLocker=YES /redir?resid=55C3109D61329D02!108&authkey=!AG793wDwQuFZa1s
CMI CBS_Core_Finalize:Calling cbs core finalize complete
CMI Callback_CMI_ConfigInstall: CBS startup processing re-run complete.
[0x030023] CMI Callback_CMI_ConfigInstall: Exit.
[setup.exe] UnattendSearchExplicitPath: Found unattend file at [C:\windows\Panther\unattend.xml]; examining for applicability.
[setup.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [specialize] at [C:\windows\Panther\unattend.xml].
IBS Callback_Unattend_InitEngine:Using unattend file found at [C:\windows\Panther\unattend.xml].
[setup.exe] ValidateSMIPass: serialized settings stream; status 0x00000000
[setup.exe] ValidateSMIPass: construct settings context; status 0x00000000
[setup.exe] SMI data results dump: Source = Name: Microsoft-Windows-IE-InternetExplorer, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/IEWelcomeMsg
[setup.exe] SMI data results dump: Description = Setting is not defined in this component.
[setup.exe] ValidateSMIPass: load SMI settings; status 0x00000001
[0x060432] IBS The provided unattend file is not valid; hrResult = 0x80220001
[0x060565] IBS Callback_Unattend_InitEngine:The provided unattend file [C:\windows\Panther\unattend.xml] is not a valid unattended Setup answer file; hr = 0x1, hrSearched = 0x1, hrDeserialized = 0x0, hrImplicitCtx = 0x0, hrValidated = 0x1, hrResult = 0x80220001
IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
IBS UnattendDumpSetting: ------Unattend setting error / warning------
IBS UnattendDumpSetting: Error code = 0x80220001
IBS UnattendDumpSetting: Pass = specialize
IBS UnattendDumpSetting: --------------------------------------------
IBS UnattendErrorFromResults: Error text = Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.
[0x0600c2] IBS Callback_Unattend_InitEngine:An error occurred while finding/loading the unattend file; hr = 0x1, hrResult = 0x80220001[gle=0x00000490]
IBSLIB PublishCriticalError: Publishing blocked message [Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.]
This installation is blocked from completing due to compliance failures or invalid input; this is not an internal error.
customsettings.ini as I think it changes the unattend?
Standard Time"
loymentShare$

Winsows 8.1 Pro Sysprep and Capture

I've been using MDT for a few years now and seem to got Windows 7 deployments down. I created my first 8.1 Sysprep and Capture TS and am running into an issue. It seems to be failing at the Win PE step before sysprep. I have made sure my DS is updated, CS.ini
is correct as far as I know, MDT 2013 with 8.1 ADK... I sysprepped and captured my Win 7 images fine. This is my first Win 8.1 GM image. Is there something obvious I am missing?
------ Applying bootable Windows PE image ------
LTIApply 3/3/2014 9:01:53 AM
0 (0x0000)
LTI applying Windows PE LTIApply
3/3/2014 9:01:53 AM 0 (0x0000)
Taking ownership of C:\bootmgr LTIApply
3/3/2014 9:01:53 AM 0 (0x0000)
About to run command: takeown.exe /F "C:\bootmgr"
LTIApply 3/3/2014 9:01:53 AM
0 (0x0000)
Command has been started (process ID 1852) LTIApply
3/3/2014 9:01:53 AM 0 (0x0000)
Console > SUCCESS: The file (or folder): "C:\bootmgr" now owned by user "pcname\Administrator".
LTIApply 3/3/2014 9:01:53 AM
0 (0x0000)
Return code from command = 0 LTIApply
3/3/2014 9:01:53 AM 0 (0x0000)
Taking ownership of C:\boot LTIApply
3/3/2014 9:01:54 AM 0 (0x0000)
About to run command: takeown.exe /F "C:\boot" /R /A /D Y
LTIApply 3/3/2014 9:01:54 AM
0 (0x0000)
Command has been started (process ID 2996) LTIApply
3/3/2014 9:01:54 AM 0 (0x0000)
Return code from command = 1 LTIApply
3/3/2014 9:01:54 AM 0 (0x0000)
ResetFolder: TakeOwn for C:\boot, RC = 1 LTIApply
3/3/2014 9:01:54 AM 0 (0x0000)
ZTI ERROR - Unhandled error returned by LTIApply: Not found (-2147217406 0x80041002)
LTIApply 3/3/2014 9:01:54 AM
0 (0x0000)
Command completed, return code = -2147467259
LiteTouch 3/3/2014 9:01:55 AM
0 (0x0000)
Litetouch deployment failed, Return Code = -2147467259 0x80004005
LiteTouch 3/3/2014 9:01:55 AM
0 (0x0000)
For more information, consult the task sequencer log ...\SMSTS.LOG.
LiteTouch 3/3/2014 9:01:55 AM
0 (0x0000)
Property RetVal is now = -2147467259 LiteTouch
3/3/2014 9:01:55 AM 0 (0x0000)
Unable to copy log to the network as no SLShare value was specified.
LiteTouch 3/3/2014 9:01:55 AM
0 (0x0000)
CleanStartItems Complete LiteTouch
3/3/2014 9:01:55 AM 0 (0x0000)
Unregistering TSCore.dll. LiteTouch
3/3/2014 9:01:55 AM 0 (0x0000)
About to run command: wscript.exe "\\server\e$\Capture\Scripts\LTICleanup.wsf"
LiteTouch 3/3/2014 9:01:55 AM
0 (0x0000)
Microsoft Deployment Toolkit version: 6.2.5019.0
LTICleanup 3/3/2014 9:01:55 AM
0 (0x0000)
Removing AutoAdminLogon registry entries LTICleanup
3/3/2014 9:01:55 AM 0 (0x0000)
VSSMaxSize not specified using 5% of volume.
LTICleanup 3/3/2014 9:01:55 AM
0 (0x0000)
Logs contained 8 errors and 0 warnings. LTICleanup
3/3/2014 9:01:55 AM 0 (0x0000)
No Windows PE image to delete. LTICleanup
3/3/2014 9:01:55 AM 0 (0x0000)

I've been using MDT for a few years now and seem to got Windows 7 deployments down. I created my first 8.1 Sysprep and Capture TS and am running into an issue. It seems to be failing at the Win PE step before sysprep. I have made sure my DS is updated, CS.ini
is correct as far as I know, MDT 2013 with 8.1 ADK... I sysprepped and captured my Win 7 images fine. This is my first Win 8.1 GM image. Is there something obvious I am missing?
------ Applying bootable Windows PE image ------LTIApply
3/3/2014 9:01:53 AM0 (0x0000)
LTI applying Windows PE LTIApply3/3/2014 9:01:53 AM
0 (0x0000)
Taking ownership of C:\bootmgr LTIApply3/3/2014 9:01:53 AM
0 (0x0000)
About to run command: takeown.exe /F "C:\bootmgr"LTIApply
3/3/2014 9:01:53 AM0 (0x0000)
Command has been started (process ID 1852) LTIApply3/3/2014 9:01:53 AM
0 (0x0000)
Console > SUCCESS: The file (or folder): "C:\bootmgr" now owned by user "pcname\Administrator".LTIApply
3/3/2014 9:01:53 AM0 (0x0000)
Return code from command = 0 LTIApply3/3/2014 9:01:53 AM
0 (0x0000)
Taking ownership of C:\boot LTIApply3/3/2014 9:01:54 AM
0 (0x0000)
About to run command: takeown.exe /F "C:\boot" /R /A /D YLTIApply
3/3/2014 9:01:54 AM0 (0x0000)
Command has been started (process ID 2996) LTIApply3/3/2014 9:01:54 AM
0 (0x0000)
Return code from command = 1 LTIApply3/3/2014 9:01:54 AM
0 (0x0000)
ResetFolder: TakeOwn for C:\boot, RC = 1 LTIApply3/3/2014 9:01:54 AM
0 (0x0000)
ZTI ERROR - Unhandled error returned by LTIApply: Not found (-2147217406 0x80041002)LTIApply
3/3/2014 9:01:54 AM0 (0x0000)
Command completed, return code = -2147467259
LiteTouch 3/3/2014 9:01:55 AM0 (0x0000)
Litetouch deployment failed, Return Code = -2147467259 0x80004005LiteTouch
3/3/2014 9:01:55 AM0 (0x0000)
For more information, consult the task sequencer log ...\SMSTS.LOG.LiteTouch
3/3/2014 9:01:55 AM0 (0x0000)
Property RetVal is now = -2147467259 LiteTouch3/3/2014 9:01:55 AM
0 (0x0000)
Unable to copy log to the network as no SLShare value was specified.LiteTouch
3/3/2014 9:01:55 AM0 (0x0000)
CleanStartItems Complete LiteTouch3/3/2014 9:01:55 AM
0 (0x0000)
Unregistering TSCore.dll. LiteTouch3/3/2014 9:01:55 AM
0 (0x0000)
About to run command: wscript.exe "\\server\e$\Capture\Scripts\LTICleanup.wsf"LiteTouch
3/3/2014 9:01:55 AM0 (0x0000)
Microsoft Deployment Toolkit version: 6.2.5019.0
LTICleanup 3/3/2014 9:01:55 AM0 (0x0000)
Removing AutoAdminLogon registry entries LTICleanup3/3/2014 9:01:55 AM
0 (0x0000)
VSSMaxSize not specified using 5% of volume.
LTICleanup 3/3/2014 9:01:55 AM0 (0x0000)
Logs contained 8 errors and 0 warnings. LTICleanup3/3/2014 9:01:55 AM
0 (0x0000)
No Windows PE image to delete. LTICleanup3/3/2014 9:01:55 AM
0 (0x0000)
Sounds like the problem occurs because the LTIApply.wsf script fails to check for the existence of the boot folder on the system partition before the script runs the
takeown.exe command to change ownership on the folder. The
takeown.exe command fails with a "Not Found" error if the boot folder doesn't exist. This causes the Sysprep and Capture task sequence to fail.
Is your MDT 2013 a fresh install or a upgrade from MDT 2012 U1?

How do I change the default iPhone screen capture format to .jpg? I have an iPhone 5.

How do I change the default iPhone screen capture format to .jpg?
I have an iPhone 5 (but I'm sure users with other models would like to do this as well).
My online searches have not found an answer -- I did find a discussion thread that was essentially, "Why would you want to do that?" Those posts are not welcome! Not looking for a work-around, an intermediate step, or the need to change the file format on a computer, etc. Just want to hit the two buttons and have the resulting capture be a JPEG file.
Not interested in jailbreaking or using apps that require jailbreak -- Want to do this with a new phone.
Thank you in advance for any help!!
--tim

You can't.

Windows Client MP is using the default action account to write to the Data Warehouse

Hi,
I have recently installed SCOM 2012R2, and am in the process of migrating everthing from SCOM 2007R2.
Just after I installed the Windows Client MP (version 6.0.7250.0), I started getting this Event 11852:
OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error
: Cannot open database "OperationsManagerDW" requested by the login. The login failed.
Workflow name: Microsoft.Windows.Client.Win7.ComputerGroup.MemoryTrendsRAM
Instance name: Microsoft System Center Data Warehouse
Instance ID: {16781F33-F72D-033C-1DF4-65A2AFF32CA3}
Management group: 2012SCOMDEV
This is happening every 7 days and only happening on the Win7 Management pack. I checked the DW logs and found that it was using the default action acount (SCOM ACTION)to send to the DW. This account doesn't have access to the DW DB.
I assume it should be using the Data Warehouse action account. This is how the acount is setup
Can anyone tell me where I'm going wrong here? I have not had to touch the permissions for any of the other Management packs. the rest of them just work.

For this issue, you can check below link
http://blog.metasplo.it/2014/01/scom-2012-oledb-module-0x80004005.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Using the default Sysprep and Capture template fails on reboot with BOD UNMOUTABLE_BOOT_VOLUME

Similar Messages

Maybe you are looking for