Using the HTML SAP GUI inside the Enterprise Portal?

Hello everyone
In our company we plan to set up the SAP Enterprise Portal (NetWeaver 7.0). The first application we want to provide inside the portal is the SAP GUI that connects to our SAP ERP 2005 system via single sign on. Therefor two different approaches exist:
1: Using the standard SAP GUI inside a portal iView. In this case every client pc needs the SAP GUI installed.
2: Using the HTML SAP GUI. In this case we have to set up the integrated ITS in our SAP ERP system.
Now I have some questions about the second approach. Is the functionality of the HTML GUI equal to the functionality of the standard GUI? If not, what are the restrictions? How high is the additional load on the network and SAP ERP system caused by the HTML GUI? Would you recommend this approach for a system with more than thousand SAP users?

Hi Marc,
At least if you consider using webgui, you should test the transactions properly as there are some issues for example with scandinavian characters and lines visible in lists of search helps.
Also you might want to consider the limitations of the screen resolutions and space which the portal framwork already takes from the gui. This of course is a topic for both HTML/SAP GUI's.
Kind regards,
Ville

Similar Messages

Using the SAP GUI from the NW2004s SneakPreview Download

Hello,
does anyone else have major problems with the SAPGUI from the NW2004 SneakPreview download page?
Im getting a runtime error when logging on:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          24.12.2005 00:34:11
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
     Control Framework : Error processing control
     Technical information about the message:
     Message classe...... "CNDP"
     Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 CL_GUI_CFW====================CP
     Include                                 CL_GUI_CFW====================CM002
     Row                                     23
     Module type                             (METHOD)
     Module Name                             FLUSH

Hello Rich,
the sap gui from the NW2004s SneakPreview page is on patchlevel 8. The problem is when i use the latest sap gui from the service marketplace (full install!) i cant event call the gui. Getting a error when doubleclicking on the SAP Gui icon.
'The procedure entry point 'RfcResetTraceDir' could not be located in the dynamic link library 'LIBRFC32.dll' .'
So actually since i installed the NW2004s on my local notebook the only sap gui "working" (at least i can call it) is the one from the NW2004s Sneakpreview page but im getting this error mentioned here on all systems! not only on the NW2004s system
regards,
Markus

Error "Please use the Latest SAP GUI version" in service admin

Hello everyone,
I have successfully installed ITS 6.20 & We are using ECC 6.0, But when I try to logon to the Admin service. I gives an error message saying <b>"Please use the Latest SAP GUI version"</b>.Please help me solve this problem.
Regards
Subramanya

Hi,
several instances of ITS 6.20 have to be mapped either to
a) different TCP/IP ports or
b) if the same TCP/IP port should be used they have to have an individual hostname.
These settings have to be defined correctly in ItsRegistryWGATE.xml.
Please have a look at this thread for further information:
Re: How to register agates with the ADMIN instance
You could also search within this forum for the keyword "ItsRegistryWGATE.xml" or do a SAP Notes search to get more information.
Also please read the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/211cc811f21a74e10000000a1553f6/frameset.htm">ITS Administrator's Guide</a>
Best regards
Henning

Is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application?

Hi,
we are developing one enterprise application specifically for iPad.Kindly advise me is it legal to use the iPhoto slideshow video inside the third party iPad enterprise application (slide show with images)?
Thanks in advance.

Thanks Terence for your reply. I mean for "the iPhoto slideshow video" is : I have collection of my own images , using iPhoto software i created a slideshow based on 'origami' theme and exported as a video file. Can I use that video in my enterprise iPad application?
Thanks.

Point to the latest SAP gui

Can anyone point me to where I can find the latest SAP GUI (7.10?) . I have just been given a laptop with no CD drive, and I don't have my memory stick with me at the moment. Anyone?.
Gary

Hi,
service.sap.com -> software download -> sap installation and upgrades -> Entry by Application Group -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE -> Installation -> 50095979_4 NW 7.0 Presentation - 7.10 Compilation 4 Present. 1/2
Let us know if this information is useful to you
with regards,
Parin Hariyani

I need to to install the latest SAP GUI

Hello
I need to to install the latest SAP GUI
Please give me the link
Thank

Hello Aleks,
please have a look at the announcement threads sticking at the top of the forum about the latest SAP GUI.
Best regards
Rolf-Martin

How to get the HTML Source code from the active browser ?

Hi All,
I need to get the HTML Source code from the active browser (IE). I tried with the below code, but I am not able to get the Source code all the time, with respect to the different applications (http or https) and the user authentication has to be changes in few applications (_I dont know or not able to given that in the below code_). More over there is also a dependence of the URL to get the HTML Source code.
Therefore what I feel is getting the HTML Source code from the given or active browser will be consistent than the URL. Since the Source code is available in the browser (IE) . Please help me with a sample code to achieve this . . . !
HTMLDocument doc=(HTMLDocument) kit.createDefaultDocument();
doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);
URL url = new URL(strURL);
Reader HTMLReader = new InputStreamReader(url.openConnection().getInputStream());
kit.read(HTMLReader, doc, 0);Thanks in advance,
Regards,
Jothi Venkatachalam
Edited by: j0o on May 7, 2009 3:11 AM

The simple answer is: you don't.
Not only is it simply not possible, but the entire concept of "the active browser" doesn't exist.
You were on the right track with your code to retrieve the page directly from the server, but as you noticed that code will only work for regular http connections.
For https and other protocols you will need to use appropriate libraries for each protocol. Something like Apache Commons can help you with that. There are networking libraries in there for a lot of commonly used protocols.

May I know how to change the color of texts inside the indicator box?

Can anyone tell me how to change the color of texts inside the indicator box? I have tried to use property node but not really know how it functions.
In fact, I am writing a program for which the number inside indicator on front panel will show red color if the measured value can't reach the requirement. I am using LabView 6.1 Professional
Thank You for your attention!!!!!!

Simply use a property node with "NumText.TextColor" and wire the correct color depending on your test result.
The attached simple example (LV 6.1) lets you change it from the front panel. In your case, you would use your test output instead of a FP switch, of course. Message Edited by altenbach on 05-25-2005 09:05 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
TextColor.vi ‏18 KB

Can someone explain the functionality of the 50-pin connector inside the SCXI-1600 board

Hello,
please explain the functionality of the 50-pin connector inside the SCXI-1600 board.
I would like to have the pinouts (explanation) of this particular connector
kind regards
the lab mouse

Hi,
Using the SCXI-1600 for anything other than controlling a SCXI chassis is NOT supported by NI!
The SCXI-1600 is based on a 16-bit MIO board. There is some additional functionality that is not used while controlling the SCXI chassis. The SCXI-1600 has 8 analog input channels, 8 DIO channels, and 2 counters; there is no analog output support on this board. There is a 50-pin connector inside the SCXI-1600 that can be used to access all of these channels.
Through Daqmx and Internal I/O filtering you can access these channels trough software. There is no pin-layout available because we do not support this.
Regards.
JV
NI Belgium

Accessing the text/property file inside the root context

Hi
          I want to access the property file lying inside the root context folder
          via plain java classes using IO.
          Could you please help me out.

Hi
Using this.getClass().getClassLoader().getResource("config_settings");
In order to load the properties file, uses the classpath search mechnism.
Basically it means that java will look for your file in the classpath.
The defualt class path of a web server is usualy the following:
ContextName/Web-Inf/Classes;ContextName/Web-Inf/lib
This is why it is working for you when you put your properties file under ContextName/Web-Inf/Classes, but it doesnt work when it is under ContextName/*, as this is not a part of the classpath search.
You have 3 options:
1.Put you properties file under the sever defulat classpath
(ContextName/Web-Inf/Classes;ContextName/Web-Inf/lib,if it's under lib, the file has to be inside a jar file)
2.Add ContextName/* to your server classpath ( in tomcat->setClasspath.bat file )
3.Instead of using "this.getClass().getClassLoader().getResource("config_settings"
read your file directly using the java.io.* library and give it the full path to the file,
you can store the full path in web.xml file, or using getServletContext().getRealPath("") to locate the context path and read the file from there( but then you are using the Servlet API )
Hope it helps
all the best
tal

How do you take out the quarter sized battery inside the computer?

How do you take out the quarter sized battery inside the computer?

Hi,
We do not know your computer therefore can not say how. In general, open the case, locate it (RTC or CMOS battery), disconnect cables (if any) and pull it out.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Has Apple stopped installing the liquid contact indicator inside the SIM slot opening on the 6 & 6+? I've inspected several devices and they are not installed.

Has Apple stopped installing the liquid contact indicator inside the SIM slot opening on the 6 & 6+? I've inspected several devices and they are not installed.

I don't know that Apple has ever officially commented on such things, one way or another. Places like ifixit will be your best sources for such information - https://www.ifixit.com/Answers/View/200937/How+many+water+indicators+or+sensors+ are+there+in+the+iPhone+6
certainly none of us fellow users know what Apple's official current policies in such things are.

Business Package for SAP Best Practices for Enterprise Portal

Hi,
We are implementing EP for ECC 5.0 and we have to web enable some FI transactions like FB50/fb60 etc. We want to use standard business package for this. The only business package that caters this requirement is "Business Package for SAP Best Practices for Enterprise Portal 60.1". When i checked the data source for this business package, the specification is for "SAP R/3 4.6B and above". Does this work for ECC 5.0 as well? In general does the R/3 specific business packages work for ECC versions? Please let me know. Thanks for the help. I promise rewards.
Regards
Hari

Hari,
When you download the BPO via Portal Content Portfolio,
each bpo has additional information on the release.
For example for the one you are inquiring about - Business Package for SAP Best Practices for Enterprise Portal, the additional release information is provided on the following links;
https://www2.iviewstudio.com/sdn/info/index.cfm?action=faqs&part=#QSR03
https://www2.iviewstudio.com/sdn/detail_view/index.cfm?action=package_information&CatalogSet=SAP%20Content&ItemID=17212&CFID=7544845&CFTOKEN=99283970
Regards,
James

HTML signatures distorted inside the Signatures and Stationery window preview/edit field, but display fine when used

I created an HTML signature and imported it into Outlook 2010/2013 by placing the .htm file into my %APPDATA%\Microsoft\Signatures folder. The signature looks and works great, however the signature looks distorted / severely squished in width when attempting
to view the signature in the Signatures and Stationery window within Outlook. What would be causing this? Is this a common issue when using .htm signatures?
It isn't too big of an issue as the signatures do work as expected when in normal use, however some users would like to tweak theirs using Outlook's built in editor and are not currently able to.

In my experience at least, that's a normal behaviour. The editor isn't fully WYSIWYG so if you do anything complicated in there it won't always give an accurate representation of what will eventually be output when you insert it into a message. I've seen
the same thing with signatures copied from elsewhere, displaying fine in the email but not in the editor, so it's not restricted to imported .htm files.

Does the local SAP GUI is required for recordings by Datago ?

hi,
Datango for records and documentation do I need a Local SAP Gui Package
guide me.
thanks,
jansi

> Datango for records and documentation do I need a Local SAP Gui Package
What is "Datango"? Is that a SAP product? If no, then you should ask the 3rd party vendor
Markus

Using the HTML SAP GUI inside the Enterprise Portal?

Similar Messages

Maybe you are looking for