Using the mapViewer for multiple markers

Hello, I am using a visual jsf project and the mapViewer in NetBeans.What I want to do is add multiple markers on the map, but I am new to this so I wanted to know if someone knows how to do this.Is there a good tutorial for more complex use of the mapViewer?I have looked in google but all there is about mapViewer is the tutorial from the NetBeans page which is very simple.Any help would be appreciated thank you!

Hi SqlCraze,
I also design the report using Report Designer. So you can directly do the same steps as I post.
In the fourth step that "Insert the corresponding fields to the second table" means directly insert State, ACount, BCount and Description fields. Please note that the list control is used to split one table into several tables based on the
Description group: one table only displays the values when Description=Category1, one table only displays the values when Description=Category2, another table only displays the values when Description=Category3. We needn't add filters in the table, just add
the list.
For more information about the list control in Reporting Services, please refer to the following blog:
http://blogs.technet.com/b/microsoft_in_education/archive/2013/03/09/ssrs-using-a-list-item-to-display-details.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Similar Messages

Use one parameter for multiple markers in PreparedStatement?

I have a prepared statement with a where clause of the following form:
where x = ? or y = ?
where the ? for x and y is the same literal value. Is there a more elegant way to handle this other than what I'm doing now (which I think is pretty clumsy):
pstmt.setString(1, aValue);
pstmt.setString(2, aValue);
Obviously, I'd like to only set the value once, and have it used both places.

No. If its transactions across multiple databases you should use different datasources.

If I buy creative cloud student plan, can I use the software on multiple computers. I have 2 laptops for school.

If I buy creative cloud student plan, can I use the software on multiple computers. I have 2 laptops for school.

Creative Cloud Help | Creative Cloud / Common Questions
Can I use the software I download from Creative Cloud on more than one machine?
Yes. Creative Cloud desktop applications can be downloaded and installed on multiple computers, regardless of operating system. However, activation is limited to two machines per individual associated with the membership. See the terms of use for more information. Learn how to deactivate a Creative Cloud license on a machine.

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

HT5922 Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Can I airplay a movie from safari on my MacBook to Apple TV and still use the computer for something else at the same time?

Hi frogjt,
Welcome to the Apple Support Communities!
Great question! You can absolutely do this in OS X 10.9. The attached article explains how the process of using AirPlay with Apple TV to create a second display. Also, towards the bottom of the article there are instructions on how to set your Displays preferences on the computer to make sure the TV and MacBook Pro displays are set up the way you want them to be.
OS X: Using multiple displays in Mavericks
http://support.apple.com/kb/HT5891
Have a great day,
Joe

ABAP routine in the infopackage for Multiple Selection

Hi experts,
I want to include a abap routine in the infopackage for Multiple Selection so that I can fetch only the required Material Numbers when the InfoPackage is schedule. As I have the constraints that I have to select certain Material Numbers only, that are not in series - so I cannot select"BT' fuction. Tell me what ABAP Code will work in this scenario.
Kind regards,
Rajesh Giribuwa

Hi,
The Routine will have to use 'EQ' operator and Append each selections to the Structure.
ABAP Routine
InfoPackage definition for Bespoke SIS Structure
Infopackage routine !
Regards
Happy Tony

I receive both My husbands emails and mine through my ipad. We both have gmail accounts. His emails are coming down on the ipad but not mine. I haven't received mail since Saturday and as we use the email for business I desperately need it.

I receive both My husbands emails and mine through my ipad. We both have gmail accounts. His emails are coming down on the ipad but not mine. I haven't received mail since Saturday. We use the email for business I desperately need it and I don't have a laptop anymore as it is broken. In my wisdom I desired to buy an ipad instead, what a mistake.

The iPad will support multiple Gmail accounts, but of course you have to set each one up individually. Did you set up both accounts? Go into Settings/ Mail, Contacts, Calendars to confirm both accounts exist. If they do, also familiarize yourself on how to navigate between accounts to make sure you can view your Inbox. You may also want to check your settings to make sure that you have the default account set up as you expect for Mail, Contacts, Calendar, and Notes (if you're using all those features). That is important only when initiating something new, you have to have a default account to do such a thing so make sure the default is your account since it is your iPad (assuming that's what you want).
Alternatively, install the free Gmail app and then use only his (or your) account with that app and use the standard iOS Mail app for the other account.

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Please help!!

I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
$uri = new-object System.Uri("http://url/")
$sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
$sts.Update();
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Passing argument to, when using one class for multiple assets

I had a class that I was passing a simple argument to like so:
var quiz_1_2:CaseStudyQuiz = new CaseStudyQuiz(2);
addChild(quiz_1_2);
I now would like to use this class for multiple MCs in my library. I thought I could let Flash create a class for each of them and specifying the CaseStudyQuiz class as the Base class. When I do that, I get the following error:
1136: Incorrect number of arguments. Expected 0.
Obviously this is because the class created by flash does not except an argument. Does that mean, I would have to create a seperate class for each of the movies that use that class? And if so, what would I have to do in that class for it to except the parameter and pass it on to my base class?
Thank you very much for any help with this!!!

use the super() function and pass your parameter. but you still might get a runtime error but i don't think that will cause a problem.

Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

Hi, we are a small clinic that uses the iPads for therapy. If we purchase an app for one iPad, can all of them download the same app at no additional cost?

Allan was somewhat incomplete in his statement. While technically it would be possible, from a licensing standpoint you need one license for each iPad unless those iPads were all going to be used by the same person (which I think unlikely given your described use). Here are the relevant terms of the iTunes Store agreement (emphasis mine):
"(ii) If you are a commercial enterprise or educational institution, you may download and sync an App Store Product for use by either (a) a single individual on one or more iOS Devices used by that individual that you own or control or (b) multiple individuals, on a single shared iOS Device you own or control. For example, a single employee may use an App Store Product on both the employee's iPhone and iPad, or multiple students may serially use an App Store Product on a single iPad located at a resource center or library. For the sake of clarity, each iOS Device used serially by multiple users requires a separate license."
So you would legally need to purchase one copy of the app for each iPad, something which would require an iTunes Store account for each iPad. For normal purchases, each iTunes Store account would need an associated credit card or prepaid iTunes card.
The Volume Purchase Plan works similarly - you still need one license and one iTunes Store account for each iPad - but the purchasing is centralized so you don't get billed multiple times. You get one recemption code for each license you purchase. See:
http://www.apple.com/business/vpp/
Regards.

How to use the 'Decision between multiple alternatives' Process variant

Hi ,
Can anyone tell me how to use the 'Decision between multiple alternatives' Process variant in BI 7 Process chains ?
The requuirement is that I have a DSO eg DSO 1 from which i have to load DSO 2 and DSO 3 . Now if the number of Records in DSO 1 are < 100 i will load DSO 2 from DSO 1 else i will load DSO 3 from DSO 1 .
So in the PC i have used a 'ABAP Program' variant (which counts the number of rows in DSO 1) after loading DSO 1 and after this 'ABAP Program' Variant , i have used the 'Decision between multiple alternatives' Process variant. Problem is it is giving me only some some system fields in the formula , like sy-datum or sy-timlo , which are of no use here .
It would be great if i can receive some help here .
--Devraj

in RSPC you create a ABAP processing type "ending with specific values".
We use true or false for things as you specify.
your abap program should return a true or a false to indicate which of the situations is applicable.
Is this helpful?
Marco

How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

This message refers to the VIs found at this link:
http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. How do I fix this?

When I try to turn on my homesharing on apple TV it says that either my apple id doesn't exist or the password is wrong. However, I've been using the id for almost half a year and I even changed my password and it still wouldn't work. What can I do to fix this?

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

Creating a Master virtual hard disk and using the same for all other VM's

Hi,
We would like to create a master virtual hard disk and use the same for all other VM's. Can we do that ?
my requirements :
1) create 10 VM's
2) first create a master virtual hard disk with win OS and use the same to create the 10 VM's.
3) After creating the VM's change the HDD size.
              -- if i have created master virtual disk with 500GB , and use the same for creating a virtual machine. can we change the HDD size to 1TB ?
After creating the VM's ,i will change the system names and activate the windows accordingly.
Will there be any implications ,if we can/will do like this.
Thanks.

Hi Suren424,
I think Using Differencing Disks may cover your needs .
Please refer to following setps:
   "Create the Parent Virtual Machine Configuration and Virtual Hard Disk
    Install the Operating System, updates, and common software
    Generalize the installation
    Prepare the parent virtual hard disk
    Create the differencing disks
    Create virtual machines that use the differencing disks
For details please refer to follwing link:
http://social.technet.microsoft.com/wiki/contents/articles/1393.hyper-v-virtual-machine-vm-parent-child-configuration-using-differencing-disks.aspx
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using the mapViewer for multiple markers

Similar Messages

Maybe you are looking for