Using the Number Pad on my non-Apple bluetooth keyboard on MBP Retina

Hi, I was able to easily connect my bluetooth keyboard to my MBP Retina, but my Number Pad doesnt seem to work. I was trying to find an option to allow the numpad in keyboard settings, but couldnt find anything. I was hoping somebody would know what to do so that I could use my Number Pad for punching in numbers on Excel, online, etc. It's a huge pain to use the straight line of keys above the letters and I'm used to using the number pad. FYI, I'm using a Logitech MX 5500 Keyboard, if that makes any difference. Any thoughts are appreciated!

All right,
Not really clear yet but try either pressing the two shift key for a few seconds (or pressing many times both at the same time) or pressing shift with space. It worked with me. Funy that the problem only happens in excel.
Got this from: http://www.fixya.com/support/t3142491-number_keys_number_pad_keyboard

Similar Messages

  • Can I use the number pad to change Spaces in Yosemite like I could in Mavericks?

    I'd really like to be able to setup Spaces to use Option-# to changes Spaces in Yosemite like I could in Mavericks. Is there a way to set that up? I've tried everything I could think of. I hate using the Option-Arrow Keys...it was so much more simple in Mavericks. Any help would be appreciated as I use 8-9 different desktops at work, and using the  arrows is a pain in the rear end. Thanks!

    Control - 1 or applicable Desktop number works for me.

  • Can no longer switch desktops using control-number on the number pad.

    Now that I upgraded to Mavericks, I can no longer switch desktops in Mission Control using control-number on the number pad. Only the numbers on the top row work.
    It's rather annoying, as it's much easier and quicker for me to swap desktops with my right hand (thumb on control, finger on numeric keypad) than left handwith the top row.
    Anyone else having this problem?
    Remember, Apple, a lot of folks still have full keyboards!

    changing the keyboard shortcuts does the trick!
    (Apparently Mavericks thinks the number pad numbers are different than the top row numbers. If you redo the shortcuts to use the number pad, the top row numbers no longer work with Mission Control)

  • How do I set the number pad to work with spaces?

    It has worked with other OSs but with Mavericks 10.9.5 (and from what I here, Yosemite) you can not use the number pad to change spaces. I know I can use the numbers across the top or the arrows, I just find it quicker and ergonomic to use the number pad. As many spaces I use this is very inconvenient to be reaching across the keyboard. Is there a way to fix this. I went to the preferences but could not find anything there to change. Maybe Apple could fix this in there next update.

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • Apple Bluetooth Keyboard volume key glitching since IOS 7 ?

    At first after installing the IOS7 the system couldn't find my Apple Bluetooth Keyboard.  After a few reboots it was found but the increase volume doesn't affect the volume it now changes the desktop as if I was clicking the mission control. The decrease volume doesn't do anything. 

    Found the answer from the forum to go to Sys Pref.  Sorry thought it was a glitch.

  • HT1212 Hello. I'm having a problem with my mini iPad. When I went to sign on yesterday the number pad moved up and now it is out of site. I can't sign on the only thing that shows is the Apple logo.

    Hello. I'm having a problem signing onto my iPad mini. When I went to sign on yesterday the number pad to sign on moved upward and now it is out of site. Now I can't sign on the only thing that shows is the Apple logo.

    Have you tried to give your iPad a reset? Hold down the sleep and home keys until you see the silver apple. Let it reboot and see if it helps.

  • Can you tell help us... Does Apple sell a keyboard that has the number pad on the left hand side?

    We want to buy an I Mac but wonder if we can get an Apple keyboard that has the number pad on the left hand side as we are both left handed.  Do Apple sell them separately?  Thanks.

    Beat me to it
    There is also this one, from the Apple Store, a lot more expensive than MichelPM's choice though. (But it will function as a stand alone calculator as well as keypad for Mac)

  • The number pad on my wirelss keyboard has stopped working...help!

    Hi All,
    New to macs, I have a new interl-based iMac with a wireless keyboard and mouse. Yesterday the number pad stopped working. The CD eject and sound buttons still work, but the numbers themselves do not - in fact when I use them, the whole machine freezes and I can not do anything. I was playing around in the system preferences yesterday - did I click something I should not have? Or is the keyboard faulty and in need of going back to the apple store for replacing?
    I have updated the machine fully, including the latest keyboard update, but the same resulting freezing occurs when I press a number on the pad.
    Any suggestions very much appreciated.

    Sorted it - I had looked, but not found any answer through the discussions already posted. But I just found this: http://discussions.apple.com/thread.jspa?messageID=3131735&#3131735 and it has sorted it!

  • Satellite P500 - After BIOS update the number pad isn't working anymore

    I just got a Satellite P500 and am running Windows 7. I downloaded all of the latest drivers and updated the system bios to version 1.70 (from Toshiba's support website). Now, my number pad on the keyboard is not working.
    The numlock light is on and when I hit the "6" key on the number pad, it turns the light on/off but the behavior of the other keys does not change whether it is on or off. The "-" key enters a "6" but none of the other keys (except "enter" does anything.
    I removed the keyboard driver and restarted to re-install the keyboard driver but that had not effect. The keyboard did work for a few days after I flashed the bios but seems to have stopped since I started using a USB mouse. I tried uninstalling the USB mouse driver but that did not do anything either (it was a Logitech driver).
    Anyone have any ideas? Thanks in advance

    I'm having this exact same issue, Did the BIOS update, which fixed the problem for Vista X64, formatted the machine to windows 7, Number pad keys except 6 and - Register as the Fn Button, Bringing up the function shortcuts display when pressed in windows, recovered from 7 to Vista X64 using Built in recovery partition, Problem still exactly the same. i have reset BIOS to defaults twice now, which has not resolved the issue. the next step will be to reflash the bios with the update again to see if this will fix the issue as it did once before. Laptop Model P500/025 Or Part number PSPE8A-025002
    *EDIT: I reflashed the BIOS with 1.70 Again and the number pad is back to normal. Seems like an extreme fix for a silly problem. Every time you format you have to Reflash your bios, risky no?*
    Message was edited by: Matrixion

  • I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

    I tried to install maverick and now my keyboard keys F10,F11, 7,8,9 on the number pad don't work on my iMac. How do I resolve this?

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • How to update the iTunes in the iPad using the I pad

    How to update the iTunes in the iPad using the I pad?

    Then you cannot update without Conecting to iTunes on a computer.
    The Over the Air Feature is only available on iOS 5 or later.
    You have iOS 4... See Here...
    http://support.apple.com/kb/HT4972
    OR...
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • I am unable to zoom in/out using the touch pad; yesterday i could zoom in/out of website pages, pics, etc, now today it is not letting me; how do i fix this?

    i am unable to zoom in/out using the touch pad; yesterday i could zoom in/out of website pages, pics, etc, now today it is not letting me; how do i fix this?

    See Here  >  http://support.apple.com/kb/HT1212

  • Can I use the I pad retina display wall charger to charge my i pod 4 by using their individual cables?

    Can I use the I pad retina display wall charger to charge my i pod 4 by using their individual cables?
    CA

    It is quite safe to use the higher powered iPad charger for other devices, as they will only use the amount of power required for charging, eventhough higher power is available. The Apple store shows all devices that can be safely charged with the iPad charger, see the link below.
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter?fnode=3c

  • How can I get the number pad to work (input characters) on my new plugin Mac full keyboard when connecrted to my mackbook?

    The number pad on by Mac USB keyboard does not work (no input).  I have updated the Mac keyboard drivers and that did fix the problem.  How can I get this keyboard to work when connected to my Powerbook?

    Do you have "Mouse Keys turned on in System Preferences / Universal Access ?
    Mouse Keys     Turn on to use the keyboard instead of the mouse to control your computer

  • I can only scroll using the arrow keys. In IE/C I can use the touch pad to slide my fingers to scroll. Why cant i do this in FF?!?!

    On my laptop (and most for that matter) you can use the touch pad to slide your fingers to scroll thru a web page. I cannot do this in firefox. It is very annoying and I dont know why cant do this?
    I have reinstalled FF and it still wont scroll! Every other browser i can scroll thru a web page using the touch pad method.
    Why cant i do this on FF?

    Hello and Welcome to Apple Discussions!
    Full keyboard access is useful for people who have difficulty using a mouse. Safari supports standard full keyboard access shortcuts for buttons and menus. If you choose, you can also use the keyboard to highlight links in webpages.
    To turn on full keyboard access:
    Choose Apple menu > System Preferences and click Keyboard & Mouse.
    Click Keyboard Shortcuts.
    Select the checkbox to turn on full keyboard access.
    To highlight links in webpages using the Tab key:
    Choose Safari > Preferences and click Advanced.
    Select the option to highlight each item on the web page using the Tab key.
    With full keyboard access turned on, Safari uses the standard shortcut keys to access menus and windows, plus the additional shortcuts shown in the table.
    Hope this helps!!
    Carolyn

Maybe you are looking for

  • No Disk error Messages in PSE8

    On and off I keep getting the following error message when I switch between Edit and Orgainzier in PSE8 and sometime other times.  Photoshop ElementsOrgainzer.exe-No Disk    There is no disk in the drive.   Please insert a disk into drive \Device\Har

  • Line Out on G5 PowerMac broken

    Hello all, I have a problem. The line-out socket in my G5 is broken. I think it is physical damage (possibly caused by someone tripping on a wire plugged into it?). I am fairly technically minded, but thought I would check... does anyone have any exp

  • Special KB characters change when sending

    Like the function to just tap the letter, hold it and you get the other characters, but once you sending off the message, it changes back to the actual letter. Why?

  • SAVE PDF IN LOCAL PC IN VF01

    With VF01 create invoice ,when save it.   the system can print INVOICE smartforms.   NOW, I want it can save the PDF in local PC at the same time. WHEN I add function  in smartforms print ENTRY FORM . CALL FUNCTION 'CONVERT_OTF'        EXPORTING     

  • Running scripts based on the presence of parents subform

    I've been developing a dynamic form wjich i've been working on for 7 weeks. I've build mandatory and validation checks for the entire form. Its a for which kan collapse based on user actions. As output this form gan generate more than 25 different ve