Using the RFC adapter (sender), how do I know which RFC is being sent?

Hello everyone!
Has anyone used the RFC adapter (sender) in XI to pick up RFC messages? How would I know which RFC is triggered for example when a user creates a PO (purchase order)?
Warm Regards,
Glenn

Glenn,
When u are writinfg RFC program, u will have destination right? There u know u have to give RFC Destination(SM59) while creating RFC destination we will be giving Program ID .
Similarly in XI while creating Sender RFC u have to give the program id. So with these program id these programs are linked together and triggered from R/3 to the exact Sender adapter.
Please see Michal weblog for more details
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
I hope it clears your doubt!!!
Best regards,
raj.

Similar Messages

Cannot process a Fixed Field Length file using the File Adapter (Sender)

Hi -
I have checked throughout these posts and blogs but I still have not been able to find a solution to my issue. When using the File Adapter (Sender) I get a Conversion initialization failed with "xml.keyfieldName", no value found. Why would I require a key field when I am using fixed field lenghts? The file is comprised of 2 structures - 1 header and multiple details (see below). There are no key fields in the flat file that I would be able to use. Any suggestions?
011000390      Customer Americas        20080605164317 000000000000000800000008000000000016000000
12345678          100500       100500       Supplier 1                         0000000000030000002008040400
12345678          100501       100501       Supplier 2                         0000000000052000002008042100
The File Adapter is configured as follows:
Document Name = Rfchke00
Document Namespace = 'my namespace'
Recordset Name = Rfchke00
Recordset Structure = Dtachkh,1,Dtachkp,*
Recordset Sequence = Ascending
Recordsets per Message = 1
Key Field Type = String (Case-Sensitive)
Dtachkh.fieldFixedLengths = 15,25,8,6,1,8,8,8,15,3,31
Dtachkh.fieldNames = F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11
Dtachkh.processFieldNames = fromConfiguration
Dtachkp,fieldFixedLengths = 18,13,13,35,15,3,8,2,21
Dtachkp,fieldNames = F1,F2,F3,F4,F5,F6,F7,F8,F9
Dtachkp,processFieldNames = fromConfiguration
Thanks,
Dave

Hi,
you can use the module from which u can convert your structure to
H011000390 Customer Americas 20080605164317 000000000000000800000008000000000016000000
D12345678 100500 100500 Supplier 1 0000000000030000002008040400
D12345678 100501 100501 Supplier 2 0000000000052000002008042100
Please note the extra H,D in the struture added by the module.
You can then use them as your key fieldValues.. The module should be deployed in Visual Admin and then can be used in the Module tab of your adapter CC
While writing the content conversion after that please dont forget about the added new characters
Please note also that i can find that the word supplier kept repeating in all the Dtachkp records
Please use that
Also if you feel that the field is of 13 characters and that would cause a problem dont worry... create a dummy field eg split tht 13 to two fields and use the common one as key field Value and identifier... as i see in ure case its like 500 Supplier , 502 Supplier . u can split the first 4 char and the remaing 9 char are key field value.
try this out
Rgds
Aditya

How can I know, which RFC connection is used by my query designer ?

HI,
I would like to know,
which RFC connection is used when i launch the query designer or the report designer or the web designer.
Thanks.
Guillaume

Hi,
Go to TCODE SM59 and see.
Regards
Nilesh

HT5824 hi..i m not sure if i have used the icloud before..how do i know if my iphone has been backed up by icloud?

hi....i m very blur at this...not sure if i have used icloud before...how do i know if my iphone has been backed up ?
it all happened 2 days ago when my iphone lost everything after updating to ios7. I couldn't even restore back up even i have done my back up before updating...
just trying my luck here , if anyone can help he to retrieve my photos and notes.

Access iCloud.com on a computer to check
http://support.apple.com/kb/PH2702
Lost or Stolen iOS device > http://support.apple.com/kb/HT5668

How do I know which Location is being used when set to Automatic

I have two Locations set up called Home and Music Room. I've selected Automatic in Network Prefernces so my Mac picks the appropriate one.
Home location - Wi-Fi (1st in the Service order), Ethernet (2nd in the Service order although I'll only be using Wi-Fi with this location)
Music Room location - Ethernet (1st in the Service order), Wi-Fi (2nd in the Service order)
So right now, for example, I'm in my music room so I want it to be using the Music Room location and Ethernet but I don't know what it's actually using. In Network preferences, Automatic is shown as the Location, Wi-Fi is at the top, and both Wi-Fi and Ethernet say 'Connected'. If I click on Ethernet to see the details, it does say in the Status area, "Ethernet is currently active and has the IP address 192.168.1.74" so does this mean Ethernet is the one being used?
Thanks.

There is no need to have 2 personal keychains. To make your life simpler combine them.
the login keychain is standard so it is best to keep that. Open the keychain access application, select your named keychain click on any of the keychain entries in the main window then press command +a to select them all then drag them onto your login keychain. You will be prompted to enter the password for your named keychain.
Then when you have successfully moved them to your login keychain make sure that is set as the default keychain and then you can delete the other keychain. Please not do not delete any of the system keychains.

ADF mobile: how do I upload a file using the rest adapter api

Hello,
I want to upload files using the rest adapter. How would I upload files such as pdfs, images (png, jpg ..) etc.. Some code would be appreciated.
Thanks,

Thanks Frank,
The back-end is functioning in the following way (using Jersey and handling input streams):
    @POST
    @Path("/uploadFile")
    @Consumes(MediaType.MULTIPART_FORM_DATA)
    public Response uploadFile(@FormDataParam("file") InputStream uploadedInputStream, @FormDataParam("file") FormDataContentDisposition fileDetail) {
        String uploadedFileLocation = "D:\\temp\\uploadsTest\\" + fileDetail.getFileName();
        // save it (this function reads from the input stream)
        writeToFile(uploadedInputStream, uploadedFileLocation);
        String output = "File uploaded to : " + uploadedFileLocation;
        return Response.status(200).entity(output).build();
     Is there a way to send data over a stream?
     Thanks,

How will I know which Scenario is my message using?

I have a problem figuring which scenario is my message using. We have this interface which has 2 similar scenarios. The scenarios are actually the same-everything inside it-the only difference is the scenario name. How would I know which scenario is the message using? I tried looking into the trace but I cannot find it there.

Mary,
As replied in the above posts, U can not create two sender comm channel or receiver determination for same interface from same source. As told, ur objects might have been copied to two scenrios which you have also confirmed.
Scenario name can be treated just as a container to hold the objects logically which belong to one process. It doesnt have any role in the execution of ur process.
You can try to change ur objects in any one scenario & same will be replicatd in other scenario also. So if I m nt wrong, I will conclude that scenario name is jst to combine the objects & doest have ny role in execution of process in XI.
Regards
Sushil

How to know which BAPi is being used for creation of PO in classic scenario

Hello Experts,
We are in SRM 7.0 classic scenario.
How can we know which BAPI is being used in the calssic scenario i.e. How can we know if we are usind BAPI_PO_CREATE or BAPI_PO_CREATE1 for creation of PO?
Any pointers will be highly appreciated.
Thank you in advance,
Thanks & Regards,
RKS

Hi RKS
yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
/people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
Good work Summer wang !!
Muthu

How do you know which fields are mandatory while uploading PO using BAPI.

How do you know which fields are mandatory while uploading PO data using BAPI. in a structure how do you know which fields are mandatory.
and also, where how do you check that, the BAPI function module is executed.
Thanks in Advance.
Naveen.

hi
hope it will help you.
Reward if help.
REPORT zpo_bapi_purchord_tej.
DATA DECLARATIONS *
TYPE-POOLS slis.
TYPES: BEGIN OF ty_table,
v_legacy(8),
vendor TYPE bapimepoheader-vendor,
purch_org TYPE bapimepoheader-purch_org,
pur_group TYPE bapimepoheader-pur_group,
material TYPE bapimepoitem-material,
quantity(13),
delivery_date TYPE bapimeposchedule-delivery_date,
net_price(23),
plant TYPE bapimepoitem-plant,
END OF ty_table.
TYPES: BEGIN OF ty_alv,
v_legs(8),
success(10),
v_legf(8),
END OF ty_alv.
TYPES: BEGIN OF ty_alv1,
v_legf1(8),
v_msg(500),
END OF ty_alv1.
*-----Work area declarations.
DATA: x_table TYPE ty_table,
x_header TYPE bapimepoheader,
x_headerx TYPE bapimepoheaderx,
x_item TYPE bapimepoitem,
x_itemx TYPE bapimepoitemx,
x_sched TYPE bapimeposchedule,
x_schedx TYPE bapimeposchedulx,
x_commatable(255),
x_alv TYPE ty_alv,
x_alv1 TYPE ty_alv1,
x_alv2 TYPE ty_alv1.
*-----Internal table declarations.
DATA: it_table TYPE TABLE OF ty_table,
it_commatable LIKE TABLE OF x_commatable,
it_item TYPE TABLE OF bapimepoitem,
it_itemx TYPE TABLE OF bapimepoitemx,
it_sched TYPE TABLE OF bapimeposchedule,
it_schedx TYPE TABLE OF bapimeposchedulx,
it_alv TYPE TABLE OF ty_alv,
it_alv1 TYPE TABLE OF ty_alv1,
it_alv2 TYPE TABLE OF ty_alv1.
DATA: po_number TYPE bapimepoheader-po_number,
x_return TYPE bapiret2,
it_return TYPE TABLE OF bapiret2,
v_file TYPE string,
v_temp(8),
v_succsount TYPE i VALUE 0,
v_failcount TYPE i VALUE 0,
v_total TYPE i.
DATA: v_temp1(5) TYPE n VALUE 0.
DATA: x_event TYPE slis_t_event,
x_fieldcat TYPE slis_t_fieldcat_alv,
x_list_header TYPE slis_t_listheader,
x_event1 LIKE LINE OF x_event,
x_layout1 TYPE slis_layout_alv,
x_variant1 TYPE disvariant,
x_repid2 LIKE sy-repid.
DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
*-----To fetch the flat file.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK v_b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF p_file IS INITIAL.
MESSAGE text-001 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-----To use F4 help to find file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
v_file = p_file.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM gui_upload.
LOOP AT it_table INTO x_table.
PERFORM header_details.
v_temp = x_table-v_legacy.
LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
PERFORM lineitem.
PERFORM schedule.
ENDLOOP.
DELETE it_table WHERE v_legacy = v_temp.
PERFORM bapicall.
MOVE po_number TO x_alv-success.
APPEND x_alv TO it_alv.
CLEAR x_alv.
*-----To clear the item details in internal table after the operation for a header.
REFRESH: it_item,
it_itemx,
it_sched,
it_schedx.
CLEAR: v_temp1.
ENDLOOP.
v_total = v_succsount + v_failcount.
PERFORM display_alv.
FORM GUI_UPLOAD *
FORM gui_upload .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
TABLES
data_tab = it_commatable
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc = 0.
*-----To fetch the comma seperated flat file into an internal table.
LOOP AT it_commatable INTO x_commatable.
IF x_commatable IS NOT INITIAL.
SPLIT x_commatable AT ',' INTO
x_table-v_legacy
x_table-vendor
x_table-purch_org
x_table-pur_group
x_table-material
x_table-quantity
x_table-delivery_date
x_table-net_price
x_table-plant.
APPEND x_table TO it_table.
ENDIF.
CLEAR x_table.
ENDLOOP.
ENDIF.
ENDFORM. " gui_upload
FORM HEADER_DETAILS *
FORM header_details .
MOVE 'NB' TO x_header-doc_type.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-vendor
IMPORTING
output = x_table-vendor
MOVE x_table-vendor TO x_header-vendor.
MOVE x_table-purch_org TO x_header-purch_org.
MOVE x_table-pur_group TO x_header-pur_group.
x_headerx-doc_type = 'X'.
x_headerx-vendor = 'X'.
x_headerx-purch_org = 'X'.
x_headerx-pur_group = 'X'.
ENDFORM. " header_details
FORM LINEITEM *
FORM lineitem .
v_temp1 = v_temp1 + 10.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_temp1
IMPORTING
output = v_temp1.
MOVE v_temp1 TO x_item-po_item.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-material
IMPORTING
output = x_table-material.
MOVE x_table-material TO x_item-material.
MOVE x_table-quantity TO x_item-quantity.
MOVE x_table-net_price TO x_item-net_price.
MOVE x_table-plant TO x_item-plant.
x_itemx-po_item = v_temp1.
x_itemx-material = 'X'.
x_itemx-quantity = 'X'.
x_itemx-net_price = 'X'.
x_itemx-plant = 'X'.
APPEND x_item TO it_item.
APPEND x_itemx TO it_itemx.
CLEAR: x_item, x_itemx.
ENDFORM. " lineitem1
FORM SCHEDULE *
FORM schedule .
MOVE x_table-delivery_date TO x_sched-delivery_date.
MOVE v_temp1 TO x_sched-po_item.
x_schedx-delivery_date = 'X'.
x_schedx-po_item = v_temp1.
APPEND x_sched TO it_sched.
APPEND x_schedx TO it_schedx.
CLEAR: x_sched, x_schedx.
ENDFORM. " schedule
FORM BAPICALL *
FORM bapicall .
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = x_header
poheaderx = x_headerx
IMPORTING
exppurchaseorder = po_number
TABLES
return = it_return
poitem = it_item
poitemx = it_itemx
poschedule = it_sched
poschedulex = it_schedx.
IF po_number IS NOT INITIAL.
v_succsount = v_succsount + 1.
MOVE x_table-v_legacy TO x_alv-v_legs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
v_failcount = v_failcount + 1.
MOVE x_table-v_legacy TO x_alv-v_legf.
MOVE x_table-v_legacy TO x_alv1-v_legf1.
LOOP AT it_return INTO x_return.
IF x_alv1-v_msg IS INITIAL.
MOVE x_return-message TO x_alv1-v_msg.
ELSE.
CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
ENDIF.
ENDLOOP.
APPEND x_alv1 TO it_alv1.
CLEAR x_alv1.
ENDIF.
ENDFORM. " bapicall
FORM DISPLAY_ALV *
FORM display_alv .
PERFORM x_list_header.
PERFORM build_fieldcat CHANGING x_fieldcat.
x_repid2 = sy-repid.
x_event1-name = 'TOP_OF_PAGE'.
x_event1-form = 'TOP_OF_PAGE'.
APPEND x_event1 TO x_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = x_fieldcat
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_save = 'A'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_master_data
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm selfield
TYPE slis_selfield.
READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
CLEAR : x_alv2,it_alv2[].
LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
x_alv2 = x_alv1.
APPEND x_alv2 TO it_alv2 .
ENDLOOP.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : x3_fieldcat,it_fieldcat[].
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_LEGF1'.
x3_fieldcat-reptext_ddic = text-111.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_MSG'.
x3_fieldcat-reptext_ddic = text-112.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
x_layout1-colwidth_optimize = 'X'.
x_layout1-zebra = 'X'.
IF it_alv2[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = it_fieldcat
i_save = 'A'
i_callback_top_of_page = 'TOP'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv2
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
ENDFORM.
FORM USER_COMMAND *
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = 'Commentry'.
ENDFORM.
FORM BUILD_FIELDCAT *
FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x1_fieldcat TYPE slis_fieldcat_alv.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '1'.
x1_fieldcat-fieldname = 'V_LEGS'.
x1_fieldcat-reptext_ddic = text-108.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '2'.
x1_fieldcat-fieldname = 'SUCCESS'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-109.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '3'.
x1_fieldcat-fieldname = 'V_LEGF'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-110.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
ENDFORM. " build_fieldcat
FORM BUILD_LIST_HEADER *
FORM x_list_header.
DATA: x_list_header1 TYPE slis_listheader.
*-----List Header: type H
CLEAR x_list_header1 .
x_list_header1-typ = 'H'.
x_list_header1-info = text-105.
APPEND x_list_header1 TO x_list_header.
*-----List Key: type S
x_list_header1-typ = 'S'.
x_list_header1-key = text-106.
x_list_header1-info = v_total.
APPEND x_list_header1 TO x_list_header.
*-----List Key: Type S
CLEAR x_list_header1 .
x_list_header1-typ = 'S'.
x_list_header1-key = text-107.
x_list_header1-info = v_succsount.
APPEND x_list_header1 TO x_list_header.
ENDFORM. " build_list_header
FORM TOP_OF_PAGE *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = x_list_header.
ENDFORM. " TOP_OF_PAGE

How could I know which table the synonym points to now?

I have two tables with the same structure, TableA and TableB
I create a synonym which points to TableA. In some senario, the synonym should be switched to point to the other table.
How could I know which table the synonym points to right now? So that I can switch the synonym to the other table.
Thanks a lot!!!!!!

How could I know which table the synonym points to right nowSee all_synonyms view.
So that I can switch the synonym to the other tableNot without drop synonym. You need to drop and recreate the synonym to point to the new table.
Nicolas.

How I can know which row is parent item code or child item in matrix?

Hi,
In marketing document, when insert a item into contents page, if it is a BOM then all child item will be inserted into matrix automatically. My question is when i view the rows in matrix how i can know which row is normal master item and which row is a child item row? From the UI, i can only see the child item code looks readonly but how i can know it in my add-on code? I tried to get the edittext box object from item No. cell, but i can't find any difference.
Thanks!
Lan

Sorry, i found an issue when i try to retrieve the BOM Type column value. I am in adding mode, when i insert a BOM with components, the bom type will appears as "Component of a Sales BOM". But in the event, when I try to get the value from this cell (it is combobox), it gives another value which is not same with the one it appears in the matrix. Is anyone know how to solve my problem?
Thanks!
Lan

How do I know which commands have been pushed to switch by PI CLI template

We have PI version 1.3. I tried to deploy the built-in CLI template "vlan" just to create a vlan. I run the template and input vlan ID and name. The job is shown as successful in PI but the vlan is not created on the switch. In the transcript part of the job history, it only shows "configlet:response: config t". Please see the attachment for the screen shot. How do I know which commands have been pushed to the switch by the CLI template? How does PI push the CLI template to the switch? via snmp or telnet? I tried to run "debug tacacs authentication" and "debug tacacs accounting" on the switch because the switch is configured for command authentication and command accounting but I don't see any commands in the debug. It looks PI did not push any commands to the switch. Please help me to troubleshoot this.
Thanks.

The MPEG 2 Playback Component required by Streamclip is an optional purchase.
http://store.apple.com/us/product/D2187Z/A
There are other converters that can handle MPEG-2 files; try Handbrake.
Regards.

How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
BizTalk 2013 and SP 2013 ..
Regards
Ritu Raj
When you see answers and helpful posts,
please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
Regards.

What's the WS adapter and how to use it?

Hi,
When I create Comunication channel, i need to select adapter type.
one of the adapter types is WS adapter?
I searched in help portal and sdn, but can't find any information.
Who know WS adapter and how to use it?
Could youplease provide such information.
Thanks in advance,
Best Regards, Johnney.

>>In SAP XI / PI, WS adapter is not thier frm standard SAP.
Are you sure about this?
WS is a standard adapter shipped along with PI 7.1 installation.
Quote from help.sap.com
Using the WS adapter you can configure the communication of systems, which communicate with each other using the Web service runtime either directly (point-to-point) or using the Integration Server
Refer:
http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/37d73b80554c2ce10000000a1553f6/frameset.htm
If you are not sure about what you are saying, it is better not to say it.

How to find the File name using the FTP Adapter

hi all,
how to find the File name using the FTP Adapter with BPEL.
Regards

Found the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts

Using the RFC adapter (sender), how do I know which RFC is being sent?

Similar Messages

Maybe you are looking for