Using ThreadLocal with WebLogic App Server
With weblogic thread pooling, When I use threadlocal variables in my application,
how does it work as far as cleaning those variables after the request is completed.
Thanks in advance.
Hi.
Hmm, since WLS execute threads never die, I don't know that your threadlocal variables
will get cleaned up or gc'd until the server is shutdown.
Regards,
Michael
Kumar Ampani wrote:
> With weblogic thread pooling, When I use threadlocal variables in my application,
> how does it work as far as cleaning those variables after the request is completed.
>
> Thanks in advance.
Michael Young
Developer Relations Engineer
BEA Support
Similar Messages
-
OAM (10.1.4.3) Integration with WebLogic App Server (10.3.0 or below)
Hi All,
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
And
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.Hi,
This is how the integration goes with different versions of WLS and OAM.
There is oamAuthnProvider.jar available with OAM 10.1.4.3 downloads. So it provides the assertion functionality.
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
Mahendra: Yes
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
Mahendra: Yes, this is the recommended and easy approach.
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.
Mahendra: Yes, older version of OAM uses SSPI connector installation.
HTH.
Mahendra. -
Best practice when using Tangosol with an app server
Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/PerHi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per -
WebLogic App server - IHS web server
Will the same "Apache HTTP Server Plug-In" allow IBM/IHS web server to work with WebLogic App server? If so which versions are supported?
Hello I'm trying to install the plugin in IHS 2.0X as per the instructions:
copy mod_wl_20.so file to modules directory,
made a following entry in httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
verified that httpd.conf is ok..but IHS coredumps upon startup. Any ideas please? Appreciate your help! Thanks!
This is on Solaris 8 -
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
Help !! its urgent !!! HTTPS to HTTP switching in weblogic App server !!
Hi,
I am using servlets in Weblogic Server environemt. My client (browser based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts .
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server on an
HTTP page and then moves to an HTTPS page, a new session is created. How can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When the Netscape
browser sees a cookie with a different port number, it assumes the destination is
a different server, so it does not return the cookie to WebLogic Server. The way
to prevent this is to specify the domain name that WebLogic Server writes in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server is runningWhich ports are you using for HTTP and HTTPS?
Robert Patrick wrote:
Is the browser talking directly to WLS or going through another web server (and the
weblogic plug-in)? In the URLs being used from the browser, do you always uss the full
machine name (e.g., mymachine.mydomain.com) or are you trying to use just the hostname
(e.g., mymachine) or the IP address?
Robert
Ajay Singh wrote:
Hi,
I am using servlets in Weblogic Server environemt. My client (browser based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts .
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server on an
HTTP page and then moves to an HTTPS page, a new session is created. How can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When the Netscape
browser sees a cookie with a different port number, it assumes the destination is
a different server, so it does not return the cookie to WebLogic Server. The way
to prevent this is to specify the domain name that WebLogic Server writes in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server is running -
HTTPS to HTTP switching in weblogic App server
Hi,
I am using servlets in Weblogic Server environemt. My client (browser based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts .
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server on an
HTTP page and then moves to an HTTPS page, a new session is created. How can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When the Netscape
browser sees a cookie with a different port number, it assumes the destination is
a different server, so it does not return the cookie to WebLogic Server. The way
to prevent this is to specify the domain name that WebLogic Server writes in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server is runningtry
weblogic.httpd.session.cookie.domain=.myDomainName
where myDomainName is something like india.techspan.com, make sure you don't put
in the name of your machine. WLS doesn't care about that in this property.
"Ajay Singh" <[email protected]> wrote:
>
Hi,
I am using servlets in Weblogic Server environemt. My client (browser
based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server
on an
HTTP page and then moves to an HTTPS page, a new session is created. How
can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When
the Netscape
browser sees a cookie with a different port number, it assumes the destination
is
a different server, so it does not return the cookie to WebLogic Server.
The way
to prevent this is to specify the domain name that WebLogic Server writes
in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned
line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server
is running -
Has anyone used JAAS with WebLogic?
Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
//INITIALIZE THIS MODULE
public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
try
//SET SUBJECT
subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
// AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
//SET CALLBACKHANDLERS
strName = new NameCallback("Your Name: ");
strPass = new PasswordCallback("Password:", false);
Callback[] cb = { strName, strPass };
//HANDLE THE CALLBACKS
callbackHandler.handle(cb);
} catch (Exception e) { System.out.println(e); }
//LOG THE USER IN
public boolean login() throws LoginException
//TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
//SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
MyPrincipal m = new MyPrincipal("Admin");
subj.getPrincipals().add(m);
return true;
public boolean commit() throws LoginException
return true;
}(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.Send this to:
newsgroups.bea.com / security-group. -
Problem : App works with Sun App server 8.0 but fails with 8.1
Hi All
I am experiencing some strange problem with executing my JSF application with Sun App Server.
I have an EAR deployed on Sun Application Server 8.0 and 8.1.
Strangely it works quite fine with 8.0 but fails with 8.1.
In my JSP page ..I have a dummy component whose getter method is used as a "FormLoad" event of the page.
<h:form id="imageForm" enctype="multipart/form-data">
<h:messages showDetail="true" />
<table width="980" border="1" cellpadding="0" cellspacing="0" bordercolor="#A9B8C2">
<tr>
<td>
<h:inputHidden value="#{Screen1.initializeService}"/>
<h:selectOneListbox styleClass="style2" id="cmbMiddleArea" immediate="true" value="#{Screen1.selectedMiddleArea}">
<f:selectItems value="#{Screen1.middleAreaList}" />
</h:selectOneListbox>
In my backing bean i have ..
public String getInitializeService() {
..... Retrieve all the data from DB to initialize all the components on the JSP page
.......setMiddleAreaList......
.......setSelectedMiddleArea.....
........set the values of the individal component...
I am retrieving all the data from DB in this getter method and intializing the components on the JSP page.
I have also checked the code generated for JSP by both the servers.I am posting the code here for reference although
i did not find any significant difference between the two...
For Server 8.0
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
return false;
For Server 8.1
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
PageContext pageContext = jspxpage_context;
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
return false;
Now the actual problem is "getInitializeService" method never gets called when i deploy and run the application on Sun App Server8.1
However with Sun App Server 8.0 it woeks perfectly fine.
Can anybody help me in resolving these issues ?
Actually generated JSP code can be referred as ...
For Server 8.0
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
return false;
For Server 8.1
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
PageContext pageContext = jspxpage_context;
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
return false;
} -
Weblogic App server 6.0 GUI Deployer
does the new Weblogic App server 6.0 contain GUI deployer application like it exits in 5.0weblogic.EJBDeployerTool
No. But, you can use the J2EE builder, currently located on our developer
center. Developer.BEA.com
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"vishal mehta" <[email protected]> wrote in message
news:3a79a258$[email protected]..
does the new Weblogic App server 6.0 contain GUI deployer application likeit exits in 5.0weblogic.EJBDeployerTool -
SP2013: Scaling search with multiple app server
Hi Team,
I am scaling a new SP environment with multiple App Server.
I have used AutoSPINstaller to install SP2013 and Search. My search components are spread across all servers. All Search components on all servers and I have a blank publishing site as part of my content source.
My issue is when i start full/Incremental crawl. It keeps on crawling for the whole day and do not produce any crawl error neither it stops. We waited for even 2 das but the crawl kept on going on.
Any help will be really appreciated.
Thanks Ba$vaHi Basva ,
Follow these steps (one at the time) to reset the Content Source crawl:
Start -> Run -> Services.msc -> Restart the “SharePoint Server Search 15”.
Make sure the Application Server Administration Service Timer Job working .
Navigate to Central Administration-> Manage service application->
Search Service Application,
Reset Index and see if that fixes the problems.
Go into the Services.msc on each server and change the "RECOVERY" method of the “SharePoint Server Search 15” from "FIRST FAILURE" to "TAKE NO ACTION" so that the service did not restart before
all the servers had their "SharePoint Server Search 14" stopped.
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Problem with sun app server startup
hi,
i am getting problem with sun app server default start.the error is::
[#|2006-03-01T13:54:35.121+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
now i am useing Win Xp operating system,
show me a solution.
Regs..
NarasimhaYou haven;t specified the exceptions you r getting ........while starting your default server.
if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........ -
When I stream videos from my laptop onto my Apple TV via my iPad 2 using the Air Video app/server the video plays great however when I pause the video the Apple TV reverts back to the home screen within a few seconds and then when I want to restart watching the video I have to re-buffer the video. Is there any way I can stop the Apple TV from reverting back to the home screen when I pause the video I’m watching?
Welcome to the Apple Community.
Contact the developer of the Air Video app. -
Strange Gateway Error with one APP Server (WSAETIMEDOUT)
Hello Everyone,
We are experiencing a strange gateway timeout issue on one application server in our SAP environment. This started happening after we applied a series of Microsoft patches and updated the SAP kernals from 179 (DB 172) to 185 (DB 182).
From this App server we are seeing all kinds of gateway errors, the following is a sample from the dev_rd file from the server in question:
LOCATION SAP-Gateway on host sappe1exp5 / sapgw00
ERROR partner 'sappe1exp4:sapgw00' not reached
TIME Sat May 30 23:40:54 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 67
GwTraceHdlInfo:
HANDLE = 6
TIME = Sat May 30 23:40:33 2009
SOCKET = 468
STAT = NI_CONN_WAIT
TYPE = STREAM IPv4
OUT = 0 messages 0 bytes
IN = 0 messages 0 bytes
LOCAL = 0.0.0.0:2604
REMOTE = -
OPTIONS = BUFFERED
ni hdl = 6
type = CLIENT
net_stat = CONNECT_TO_REM_GW_PENDING
hostaddr = 10.10.0.21
opcode = NORMAL_CLIENT
conn opcode = REMOTE_GATEWAY
conn vers = 105
index = 59
data = 0000000000000000
ext_info = 000000000333DCA0
offset = 0
rest_len = 0
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 10.10.0.21
service = sapgw00
tpname = sapdp00
Sat May 30 23:46:17 2009
***LOG Q0I=> NiPConnect2: connect (10060: WSAETIMEDOUT: Connection timed out) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 428
(SI_ECONN_REFUSE/10060; I4; ST; 10.10.0.21:3300) [nixxi.cpp 2823]
I have done alot of searching and I have tried the following things:
1) Checked the services file of this machine, they line up with all other systems
2) Attempted to telnet to other App servers on 3200, 3300, 3600 with no success
3) tried to connect via SM59 to another App server with no success
4) Attempted to do all of these things in reverse from the another app server with the same results.
This is only happening with one app server in our landscape and this app server has no issues connecting to the CI.
Any ideas on where I can look further?
Edited by: James Wright on Jun 5, 2009 10:10 PMHi,
on sappe1exp5 try the following command in a dos prompt:
telnet sappe1exp4 sapgw00
this should also time out i.e. hang for a certain amount of time (~50 seconds) and then terminate with error.
It simply means that the IP address 10.10.0.21 is not reachable from your client PC.
Maybe you changed some IP addresses during patches. Usually there is an RFC destination that is not functioning properly.
Best regards
Carl Philipp -
Microsoft IIS as a re-direct in front of a Weblogic app server hosting ADF?
Has anyone had tried to set up Microsoft IIS as a re-direct in front of a WebLogic app server hosting ADF?
Can you please share the best practices, config params, etc?
Thanks and regards
AnilAny suggestions in this regard?
Maybe you are looking for
-
In Acrobat Professional 9.4.1., there is a new, default behavior which regularly causes annoying boxes pop up which indicate that the 'document is being prepared'. This wastes time and adds no value. To disable this aberrant behavior, one must remove
-
I have a LAbview 8.6, and i can´t open a file from a Labview 5.1.1
Hi, When i try to open a file(a driver to an OSA from Agilent) appears a error message, saying that the source´s version is too old(5.1.1), when my labview is 8.6. Anybody knows something about it?
-
Not able to switch Theme ... in Application Express 3.0.0.00.20
Hi All, While creating the application it was a theme called "Blue and Tan" Now i am trying to import and switch theme called "Business". But unfortunately i am not able to do this... Please if any one can help me out from this then it would be pleas
-
OCP 9i "Hands on Course Requirement"
I work and live in the New York, Manhattan area. I have inquired to several computer schools about the OCP 9i "Hands on Course Requirement". They appear to have little or no ideas about what I am talking about. Can anyone point me to a reputable or a
-
MBP Won't connect to the Internet
Hello, As of a few days ago my MBP(Summer 09) will not connect to my home internet. It picks up the wireless network, but always self assigns an IP address. I have full bars indicating a strong signal. I have used this connection for almost a year an