Using TimeCapsule with a Comcast modem AND Airport Express. Way slower after updates! What's up?

I've been running this set up for two years now without a hitch. Comcast Modem to TimeCapsule by Ethernet. Then TimeCapsule to Airport Express via WiFi. It used to work great because my TC was far away from my family room and the AE extended my network flawlessly.
After Mavericks and IOS 7.06 installations on my devices (iMac, Macbook Air, iPhone, and iPad) my wifi seems to be moving at half speed. I've rebooted the Comcast Modem and TimeCapsule. I guess I should reboot airport express as well. But I doubt thats the problem. I was thinking of asking Comcast to change out Modems but this is a new problem only since updates. What should I do?
Any ideas?
Thanks
Marylyn

Power off the entire network.....all devices....computers, printers, modem, TC, mobile devices, etc
Wait a few minutes
Start the modem first, and let it run a few minutes by itself
Start the TC next and let it run a full minute
Keep starting devices one a time about a minute apart until the entire network is powered back up
Check the network

Similar Messages

HT201335 Can i use airplay with the apple tv and airport express without an internet connection? Basically Set it up as a closed network?

I was told I could set a local network with the airport express, apple Tv, and my iPad to stream videos or pictures to a TV for a presentation.
No internet connection is available at the location.
Is that possible? Or do I need to access itunes homeshare with an internet connection to make this work?
I've set it up at home where I have an internet connection and it works fine but I want to move the setup to my church for a class. The data I'm using is stored on my ipad.
I know I can do this wired with the HDMI adapter but would like to do it wireless.
Thanks for any help!

Ok so we now have a solution to the problem. A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped. Fisrtly we plugged the airport express into my router using the ethernet cable (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express. In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned. We also named the Airport Express with a distinguishable name. We then waited for the changes to be registered then unplugged the Airport Express from the router. I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name. I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare.
Hope this helps.

TV and Airport EXPRESS stop streaming after update

I have read all of the posts regarding the Airport Extreme update being the culprit of the slow streaming with the Apple TV, but I have an Airport Express (2 actually) that suddenly stopped streaming after the last batch of updates (iTunes 8 etc.).
Everything has been working flawlessly - I have all my movies and TV shows on an old Mac that streams to my Apple TV via 2 Airport Express base stations. I have one AE station "hosting" my internet connection, and then the other acting as a WDS remote. Suddenly after the last updates I have no streaming. I have re-set everything, and re-connected my media server to my Apple TV and no luck. My AE's are at the latest firmware 6.3, and Apple TV, iTunes and even OS is all up to date.
If anyone has any ideas how to fix this I would really appreciate it - it's driving me crazy.
Thanks in advance.

Am in the same boat as it where, so will be happy to hear a solution!

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

Best Router with DSL Modem for use with AT&T DSL and Airport Express?

I recently had my old 2WIRE from AT&T DSL service die, so purchased a new 2WIRE 2701HG-B. My old 2WIRE worked with my Airport Express, which is hooked up to my DVR for DirecTV use. The new 2WIRE apparently is not compatible with the Airport Express, so I returned it and purchased a NetGear Wireless-N 300 Router with DSL modem. While this one does work with the Airport Express setup, it runs very slow. This router has mediocre reviews, so I'd like to find a better one.
I'd appreciate any suggestions for a Router w Modem that would work best with my AT&T DSL and Airport Express (802.11n) within the $100 - $150 price range. Thanks!

Configure the Express as a bridge: Connect via "Ethernet", and set Connection Sharing to "off (bridge mode)".
The switches ought not to be a problem, and I don't know why your router froze. The Express is simply another wired client, just like a computer might be.
do I turn off DHCP on the router,
No. Something has to provide routing functions so leave the Linksys alone.

Vonage between cable modem and Airport Express is a problem

I have my Comcast cable modem connected via Ethernet to the Vonage box which is connected via Ethernet cable to my Airport Express. When I try to connect wirelessly via my Powerbook it's a crapshoot whether or not I can connect to the internet. Mostly the quality is very poor if you can connect at all. If I cut the Vonage out of the equation hooking the cable modem to the Airport Express it works perfect. So Vonage is my problem and I need to change some settings either with my computer or my Airport Express, but which ones? I've been given several different ideas from the information I've sifted through (i.e. change the DNS, change the sharing prefs, get a hard wired router). Oddly enough an old HP computer I have in the basement connected to the internet via another Airport Express has no problems with connection at all. If someone could let me know which of these fixes I am preparing to try would work the best I would appreciate it.

Interesting. So you have two Airport Express devices configured into a WDS, with the one upstairs functioning as the main base station and the one downstairs functioning as a remote base station. And your PC downstairs connected to the remote base station has no problems connecting to the internet. Is that PC cabled to the Airport Express, or does it connect wirelessly to the remote Airport Express?
What happens if you bring the Powerbook downstairs to where the PC now resides. Does the Powerbook then get the same great internet connection as the PC?

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

Airport Express not working after update

I can no longer connect to my network through my Airport Express.
This afternoon I started up the software updated program in my MacBook Air and through my fully functioning network a whole bunch of updates were downloaded and installed.
But when everything was done I could no longer connect to my network through my Airport Express!
Unfortunately I didn't really notice what kind of updates I was installing.
There were seven in total. I think one was a firmware for my MacBook Air.
I also think there was one for my Airport Express because the last update was about it somehow and it needed to close down the network in order to finish the update. But when it was supposed to reconnect nothing worked.
I've turned off my modem, my airport express and my air but there's been no improvement.
My Win PC can't access the network any more either.
I've also tried to put the network cable straight in my PC and it works fine, so there's nothing wrong with the modem or the cable.
It must be my Airport Express...
The Airport Utility program can't find my Airport Express.
I can find other networks in the area but not my own.
What to do?
Any help is greatly appreciated.
Tommy

I got some help so that I could see what was updated:
2008-07-06 15:16:26 +0200: Installed "Keynote Update" (4.0.2)
2008-07-06 15:16:43 +0200: Installed "Pages Update" (3.0.2)
2008-07-06 15:16:47 +0200: Installed "MacBook Air EFI Firmware-uppdatering" (1.0)
2008-07-06 15:16:57 +0200: Installed "AirPort-verktyg" (5.3.2)
2008-07-06 15:24:31 +0200: Installed "Mac OS X Kombinerad uppdatering" (10.5.4)
2008-07-06 15:25:04 +0200: Installed "Numbers Update" (1.0.2)
2008-07-06 15:25:54 +0200: Installed "QuickTime" (7.5)
2008-07-06 16:37:59 +0200: Installed "Keynote Update" (4.0.3)
2008-07-06 16:38:20 +0200: Installed "iDVD-uppdatering" (7.0.2)
2008-07-06 16:38:26 +0200: Installed "iMovie-uppdatering" (7.1.2)

Belkin wireless modem and Airport Express lan problems

Let me preface my problem by stating the obvious - I'm not very technically proficient!
That said, I've had an AirPort Express wireless lan connecting three computers on my home/office network for the past 8 months without any problems at all. All machines on the network have been able to access the internet via a Thomson SpeedTouch 530 ADSL1 modem that connects via an ethernet cable to the AirPort Express. No problems.
The network consists of my G5 iMac (ALS), my husband's Mac mini and my Sony VAIO laptop (XP Pro SP2).
I should also mention that half-way between my office and my husband's office there is a second AirPort Express that 'boosts' the signal to his office.
I recently changed ISPs to a provider that offers the faster ADSL2+ service. This meant that I had to get a new Belkin ADSL2+ modem. This is my problem. I cannot connect my AirPort Express network to the internet using the Belkin modem. The Belkin modem connects without any problem if I just have it connected via ethernet to my iMac but that's not what I want to do.
My existing AirPort details are -
IPv4 Address: 10.0.1.3
Router 10.0.1.1 (this is the SpeedTouch 530 modem)
Subnet Mask 255.255.255.0
I thought I could change the new modem's address(?terminology?) from 10.1.1.1 (which is how it came) to 10.0.1.3 and that everything would work but it doesn't.
Belkin tech support said 'the problem is with your AirPort Express' (what else would they say)?
Do I have to keep the 10.1.1.1 and change my AirPort addresses? Or should I try to set up a new network?
2GHz 20-inch iMac G5 (ALS) Mac OS X (10.4.4) Mac Mini; 12inch PowerBook; 120GB external firewire hd; Video iPod; iPod mini;

No ideas?

Wireless Modem and Airport Express USB Printer

I am already connected to the internet via a wireless modem provided by my ISP. The connection uses Airport. I just purchased an Airport Express to connect my computer to a printer through the USB port. However, I can't get the airport utility to connect to the Airport Express solely for the purpose of connecting to the printer. I have tried to make the new aiport express both a new network and part of an existing wireless network with no sucess. I sitll have a flashing yellow light on my Airport Express. I have not connected the wireless modem to the Airport Express. Do I have to connect the airport express to the modem? Help!
iBookG4 Mac OS X (10.3.9)
iBookG4 Mac OS X (10.3.9)
iBookG4 Mac OS X (10.3.9)

Hi Andrew Otis:
Welcome to Apple Discussions!
You'll need to configure your AE via the Airport Admin Utility to Join an Existing Wireless Network, then select the name of your network in the drop down box or enter it EXACTLY as the SSID is broadcasting your network Name. You may also have to configure wireless security if you wireless modem has that enabled.
I hope this helps!

How can I expand my wireless network with a Time Capsule and Airport Express?

My entire house is wired for ethernet access (2 floors). I have a Time Capsule on the 2nd floor that reaches the entire house except for one room.
In this one room I have an ethernet port plugged into an Airport Express.
The problem I encounter is that I have two separate wifi networks with two separate names. I realize I can extend the wireless network on the 2nd floor to the 1st floor but I can only do this wirelessly to my knowledge, and the entire problem is that the signal doesn't reach the front room. Also, there is really no place in-between that the AE can be placed to extend the reach. The building is concrete and steel, I think that has a lot to do with the problem.
My question is: Can I have two wireless routers (connected to the same home network via ethernet) broadcast the same wifi network? I also have a SONOS system that further complicates things, I'm afraid. Would it help if I drew some sort of diagram?
Thanks!

Your network is not working as you describe.. or I have misunderstood the layout..
What is the broadband type? Modem is where? What is the main router?
From your screen shots the main router is the airport express that covers one room which seems wrong.
Why isn't the TC the main router? or both bridged.. if you go back and look at the apple document.. one or both apple routers are in bridge mode..
You are having issues with setup .. half of which is caused by v6 airport utility.
What OS are you running? Please install 5.6 utility.. do it.. do it now!!
Easy for Lion.
http://support.apple.com/kb/DL1482
Messy but possible for ML.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

WPA security with both time capsule and airport express not working together

I want to set WPA security on my time capsule so that my teenager can not access wireless with out permission but when I add a security key my airport express disappears from list.
I have tried setting a password then the time capsule restarts and when it does the aiport express is gone from list and can not be found when rescanned.
Do I need to set time capsule and then reset airport express by pluggin it directly into desktop and resetting its software?
Thanks

I would suggest, reconnecting the Express to the TC again. Use the AirPort Utility to make ALL configuration changes including the network extending settings. Then restart both base stations and check that the settings are still good. Then disconnect the Express and give it a few minutes to initialize. It should connect. If not, then the issue may be either the distance or obstructions (like walls, ceilings, floors, etc.) that is preventing the Express from getting a signal from the TC that is adequate enough to extend.

Can I use MacBook as a base station and airport express to extend?

I currently have my ethernet cable plugged in to Airport Express to provide WiFi in my house. However, the signal doesn't always reach upstairs. Can I plug the ethernet in to my Macbook downstairs and use the AE upstairs? Or how can I make the signal stronger upstairs?

Can I plug the ethernet in to my Macbook downstairs and use the AE upstairs?
Unfortunately, no.
You are asking about configuring the AirPort Express to "extend" a wireless network from your Mac. It cannot do this.
It can only extend a wireless network when you have another AirPort base station. In other words, it always takes a minimum of 2 AirPort routers to extend a wireless network.
If you add another AirPort Express approximatel half the distance from your "main" Express and configure it to "extend a wireless network", you will have more wireless signal coverage upstairs. Here, I' am assuming that you have the "n" wireless versions of the AirPort Express.

Airport express not working after updating to 7.6.3

Hi all,
I bought my airport express about 6 months ago. It's been working perfectly. Then this morning, I woke up to the blinking amber lights, not good.
I restarted the modem, and checked the connection (by hooking up my mbp directly to the modem) and everything is fine. I plugged in the ethernet cable to airport express, powered down then up, no luck. Airport utility popped up (on my mbp) asking me to update firmware to 7.6.3 (I had 7.6.2). So I reconnected my mbp to the modem and updated the firmware, connected the ethernet cable back to airport express, powered down/up, still no luck. I grew desperate and did a hard reset, still nothing!
I am not sure what happened here, or if anything had changed, since it was working fine as I went to bed last night.
anyone else seen this before? i checked with Apple, it seems that my airport express is out of the free-repair period.
pls help
thanks a lot

Worked on it some more and finally realized that I've plug the ethernet cable in the LAN port instead of WAN port. So, internet is back. Still don't know what happened (when it died), but owell.

Safari and other aplications super slow after update to Snow Leopard. Installed the update combo and nothing happened, still super super slow. Any tips to solve this?

After updating to Snow Leopard (to install Lion later), Safari and other aplications became super super slow and Preview is not working properly, I can't print anything that was opened with Preview. Already installed the Combo update, nothing happened, Safari still taking hours to load any site. I honestly regret downloading Snow Leopard, the older version worked so much better... Hope Lion is smarter than Snow Leopard...

This may help:
Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf

Using TimeCapsule with a Comcast modem AND Airport Express. Way slower after updates! What's up?

Similar Messages

Maybe you are looking for