Using Union in Execute SQL Task

I am using the following SQL statement in an Excute SQL Task:
declare @RespAreaSubAreaID int, @UserLevelID int, @SubmittedByUserID int, @RespAreaID int, @SubAreaID int
Set @RespAreaSubAreaID = ?
Set @SubmittedByUserID = ?
Set @UserLevelID = ?
set @RespAreaID = ?
set @SubAreaID = ?
select users.User_EmailAddress + ';' As CC
from users inner join UserLevelsNotificationFrequencys on users.user_Id = UserLevelsNotificationFrequencys.User_id
where UserLevelID = @UserLevelID and RespAreaSubAreaID = @RespAreaSubAreaID and (NotificationFrequencyID = 4 and users.user_id <> @SubmittedByUserID)
union
select users.User_EmailAddress + ',' As CC
from users inner join UserLevelsNotificationFrequencys on users.user_Id = UserLevelsNotificationFrequencys.User_id
where UserLevelID = @UserLevelID and RespAreaSubAreaID = @RespAreaSubAreaID and (NotificationFrequencyID = 1)
I have my parameter mapped correctly. My results set is set to xml because I want it all in one string to use as a variable named User:CC. On the Result Set tab the result name is 0 and the variable name is User:CC. When I run my package I am getting
the error below. Can I not do a union query in the execute SQL task? I tried to not declare anything and just map to each of the variables that I am passing in the order that they are needed but that didn't work either. Thanks in advance for your help in this
matter.
[Execute SQL Task] Error: Executing the query "declare @RespAreaSubAreaID int, @NotificationID
in..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection
not established correctly.
Reach for the unknown!

Thank you for your reply but I am not using the Data Flow. All my work is happening on the Control Flow. I am looping through a set of records and emailing them to the correct
people. Setting my result set to XML worked for the To Line (See my earlier post Execute SQL task for Email ToLine using COALESCE and two variables) and now I am working on the CC line which is more complicated because it uses a union statement.
Reach for the unknown!

Similar Messages

SSIS - Using Variables in Execute SQL Task Error

The following query in my Execute SQL Task throws the following error when run - [Execute SQL Task] Error: Executing the query "SELECT @columnz = COALESCE(@columnz + ',[' + times..." failed with the following error:
"Must declare the scalar variable "@columnz".". Possible failure reasons: Problems with the query,
"ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Query:
drop table tmpNCPCNCDownstreamMaxUtilization3wks
select node, max(utilization) as max_Utilization, DATE
into tmpNCPCNCDownstreamMaxUtilization3wks
from stage_ncpcncdownstream_temporal
WHERE Date BETWEEN DATEADD(day, -20, GETDATE()) AND GETDATE()
group by node, date
order by node
go
alter table tmpNCPCNCDownstreamMaxUtilization3wks add Timestamp varchar(50)
go
update tmpNCPCNCDownstreamMaxUtilization3wks
set Timestamp = 'WeekOf_' + cast(left(Date, 11) as varchar)
go
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
declare @columnz varchar (8000)
go
SELECT @columnz = COALESCE(@columnz + ',[' + timestamp + ']','[' + timestamp+ ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks group by timestamp order by timestamp
go
--pivot contents in @columns
declare @query varchar(8000)
SET @query ='select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in('+ @columnz +')
)as p'
execute (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
update tmpNCPCNCDownstreamMaxUtilization3wks
set timestamp =''
truncate table tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
insert into tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
(Node, TwoWeeksAgo, PreviousWeek, CurrentWeek)
select * from tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
update tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
set average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0))/3
from tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
Scott

Issue is with variable @columnz.
Scope of variables is only limited to the batch and if batch is over Variable is no more accessible.
Reproduce Steps:
DECLARE @columnz int = 0
Go --Scope of @columnz ends here
SELECT @columnz -- Ends up with error
So you have to remove GO keyword. I have commented 2 of them in below:
DROP TABLE tmpNCPCNCDownstreamMaxUtilization3wks
SELECT node
,max(utilization) AS max_Utilization
,DATE
INTO tmpNCPCNCDownstreamMaxUtilization3wks
FROM stage_ncpcncdownstream_temporal
WHERE DATE BETWEEN DATEADD(day, - 20, GETDATE())
AND GETDATE()
GROUP BY node
,DATE
ORDER BY node
GO
ALTER TABLE tmpNCPCNCDownstreamMaxUtilization3wks ADD TIMESTAMP VARCHAR(50)
GO
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = 'WeekOf_' + cast(left(DATE, 11) AS VARCHAR)
GO
--drop table tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--go
DECLARE @columnz VARCHAR(8000)
--GO
SELECT @columnz = COALESCE(@columnz + ',[' + TIMESTAMP + ']', '[' + TIMESTAMP + ']')
FROM tmpNCPCNCDownstreamMaxUtilization3wks
GROUP BY TIMESTAMP
ORDER BY TIMESTAMP
--GO
--pivot contents in @columns
DECLARE @query VARCHAR(8000)
SET @query = 'select * into tmpNCPCNC_DownstreamNodeUtilizationMaxPivot from
(select node, timestamp, Max_Utilization from tmpNCPCNCDownstreamMaxUtilization3wks)a
pivot
sum(max_Utilization) for timestamp in(' + @columnz + ')
)as p'
EXECUTE (@query)
--empty contents from NCPCNCDownstreamMaxUtilization3wks
UPDATE tmpNCPCNCDownstreamMaxUtilization3wks
SET TIMESTAMP = ''
TRUNCATE TABLE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
--load to table to be joined to Node feature class
INSERT INTO tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week (
Node
,TwoWeeksAgo
,PreviousWeek
,CurrentWeek
SELECT *
FROM tmpNCPCNC_DownstreamNodeUtilizationMaxPivot
--calculate average utilization for all values in each record
UPDATE tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
SET average = (coalesce(twoweeksago, 0) + coalesce(previousweek, 0) + coalesce(currentweek, 0)) / 3
FROM tmpNCPCNC_MaxDownstreamNodeUtilzationChart3Week
-Vaibhav Chaudhari

SSIS: How to use one Variable as Input and Output Parameter in an Execute SQL Task

Hello,
i need your help,I'm working on this issue since yesterday and have no idea how to deal with it.
As I already said in the tilte i want to start a stored procedure via a Execute SQL Task which has around 15 prameters. 10 of these should be used as input AND output value.
As an example:
i have three Variable:
var1    int        2
var2    int     100
var3    int     200
the stroed procedure:
   sp_test
     @var1 int
      @var2 int output
      @var3 int output
   AS
   BEGIN
        SET @var2 = @var2 * @var1
        SET @var3 = @var3 + @var1
   END
So in the Execute SQL Task i call the Stored Procedure as follwos:
    Exec sp_test  @var1 = ?, @var2 = ? output, @var3 = ? output
(I use an OLE DB Connection)
The parameter mapping is as follows:
User::Var1        input                   numeric              0                 -1
User::Var2        input/output         numeric              1                 -1
User::Var3        input/output         numeric              2                 -1
Now my problem. If i set  Var2 and Var3 as Input parameter the values are still the same after running the package. If i set them to a output value the are both Null because the procedure doesnt get any values.
I already tried to list them a second time - like
    User::Var2        input                  numeric              1                 -1
    User::Var2        output                 numeric              1                 -1
or i use a new variable
    User::Var2                  input                  numeric              1                 -1
    User::Var2Return        output                 numeric              1                 -1
but i alwas get the error
"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Has anybody an idea how I can solve this problem?
Thanks a lot.
Kind Regards,
Alice

Hi Alain,
thx for your answer.
I have around 15 procedures called one after the other to calculated and modify my values. Each procedure is responsible for an other but overlapping set of variables. So i thought it would be a good idea to call them one after the other with the needed variables via a execute sql task.
So if i use a result set, how i get my stored procedure to return 10 values? I would have to use a Function instead of a procedure, wouldn't i?
As if i have 15 procedures this would be a lot of work.
But thanks a lot for the idea. I think an other idea would be to create one function which calls all stored procedures and returns all the calculated values as a result set, wouldn't it?.
Kind Regards.
Alice

How to pass a parameter into execute sql task and later use it into dataflow task?

i am in a situation, where i have a logging table in which i have a primary key called ETL_log_ID which is an identity column and acts as a foreign key for various fact table and dimension tables which are populated using SSIS packages. Now i wanna use the
ETL_log_ID as a parameter in the execute sql task which populates the log table and pass the same value in the data flow task which populates the facts and dimension. Can you let me know how to pass the parameter in a step by step procedure.
Thanks,
Nikhil

Nikhil,
You can check the following :
http://www.programmersedge.com/post/2013/03/05/ssis-execute-sql-task-mapping-parameters-and-result-sets.aspx
http://stackoverflow.com/questions/7610491/how-to-pass-variable-as-a-parameter-in-execute-sql-task-ssis
Regarding the usage in Dataflow task, Can you elaborate on that a little?
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Execute SQL task for Email ToLine using COALESCE and two variables

Hello...
I am converting an old DTS package to SSIS. The old package consist of mostly ActiveX Script so I am breaking it down into steps. Basically... I am retreving a set of records that need to be sent via email to multiple people. In my package to create
my ToLine for the Send Mail Task I am using several steps. Frist I am using:
SELECT CASE
          WHEN EXISTS ( SELECT        users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?) ) THEN
             1
          ELSE
             0
       END AS ValidEventID
I use this to see if there is any records to create my email string. This works fine. After this I have a Script Task that splits my pipe in two. When no records exist (User::ValidEventID == 0) I am loging that event to a log. When records do exist
I am using another Execute SQL task to create the actual ToLine:
Declare @combinedString VARCHAR(max)
SELECT      @combinedString = COALESCE(@combinedString + ', ', '') + Users.User_EmailAddress
FROM            dbo.Errors INNER JOIN
                         dbo.Users ON users.user_id = Errors.MonitorAuditor_User_Id
WHERE        ([Audit_Id] = ?) AND ([ErrorCode_Id] = ?)
SELECT convert(varchar(4000),@combinedString) as StringValue
I have my resultSet set to Single Row. I have two variables coming if for the Audit_Id and ErrorCode_Id. My Result Set is set to a Variable: User::EmailAddressString.
Next it goes through a foreach loop to map to the ToLine email variable that I created named User:User_EmailAddress.
Then I am using that in my Send Email Task.
It all works fine when I hard code my variables into the COALESCE statement but as soon as I replace that with the ? that SSIS requires for variables I am getting the following error:
[Execute SQL Task] Error: Executing the query "Declare @combinedString VARCHAR(max)
SELECT      ..." failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly,
parameters not set correctly, or connection not established correctly.
I have tried changing my resultset property, I have checked my paramenters and my connection. I don't understand why it works fine when I have my varaiables hard coded but not when I change them to the ?.
Thanks in advance for you help in this matter.
Reach for the unknown!

Katherine... that did not work.
What I ended up doing was taking out the forloop all together. In my Execute SQL Task I changed the result set from single row to XML. I took out the COALESCE statement and just went for something more basic:
select users.User_EmailAddress + ';' as User_EmailAddress from Errors inner join users on users.user_id = Errors.MonitorAuditor_User_Id WHERE ([Audit_Id] = ? AND [ErrorCode_Id] = ?)
Currently I am just logging the string to a text file so I can see the results. In my text file the string is surrounded by <ROOT></ROOT>. So I will next I will work on triming that off the string and then populate my Send Mail Task.
This is how I trimed off the <ROOT></ROOT>:
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
"<ROOT>",
Dts.Variables(
"EmailAddressString").Value = Replace(Dts.Variables("EmailAddressString").Value,
";</ROOT>",
Thanks again everyone for the help!
Reach for the unknown!

How to use a parameter in an Execute SQL Tasks in SSDT executed against Netezza

Good Evening,
How can I pass a parameter in an Execute SQL Tasks in SSDT executed against Netezza? Below are my settings and error message.
[Execute SQL Task] Error: Executing the query ""TRUNCATE TABLE" ?"_POC..JOHN_TEST"" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet"
property not set correctly, parameters not set correctly, or connection not established correctly.
Thank you in advance for your assistance.
Brett

Hi Baloun,
Based on my further research, just as you said, we cannot directly use table name as a variable.
To fix this issue, we can change the SQL command in the SQLStatement property as below:
declare @sql varchar(100)
set @sql = 'TRUNCATE TABLE ' + ? +'_POC..JOHN_TEST'
exec(@sql)
go
The Parameter Mapping pane use the former settings in your picture.
Reference:
http://www.bidn.com/blogs/kylewalker/ssis/2063/parameters-don-t-always-work-in-your-execute-sql-task
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

SSIS - Script Task creates a DTS var and using Foreach loop, Execute SQL needs to INSERT into table from this DTS var.

I have a script task written in C# that creates an array of strings "arrayFields" after parsing a text file. It saves the array of strings in a DTS variable.
Each row in array represents a row is comma separated and is a row that must be inserted into a table. For example,
X and Z are fields in the table
X1, X2,....Xn
Z1,Z2,...Zn
I am using a Foreach Loop to grab each row and then Execute SQL Task to take each row from the array and insert each field per row in a table,
The SQL is something like,
INSERT dbo.table values(field1, field2,...fieldn) arrayFields?
What should this this INSERT look like?

I guess you implemented
Shredding a Recordset
Based on what I understood (correct me if I am wrong) you have difficulties mapping the input parameters, if so here is the guide
http://www.sqlis.com/sqlis/post/The-Execute-SQL-Task.aspx
In short it might look like
INSERT dbo.table (ColumnA, ColumnB,...) VALUES (?,?...)
The syntax for the T-SQL INSERT is http://technet.microsoft.com/en-us/library/dd776381%28v=sql.105%29.aspx
Arthur
MyBlog
Twitter

Send Email using Execute SQL Task??????

I need to send the bad records in the data flow. I am attempting to do this using Execute SQL Tasks. Please give me steps I need to accomplish this. I have not set any variables up yet, assuming I need too.

Just add a Send mail Task (or Script Task if using gmail etc which requires authentication) and pass the file as an attachment. Make sure you've a step (Script Task) to check if file length > 0 (ie file has records) before you link it to Send mail Task
ie use a conditional precedence constraint (Expression And Constraint option)
See these links for more details
http://dwteam.in/send-mail-in-ssis-using-gmail/
http://www.mssqltips.com/sqlservertip/1753/sending-html-formatted-email-in-sql-server-using-the-ssis-script-task/
https://www.simple-talk.com/sql/ssis/working-with-precedence-constraints-in-sql-server-integration-services/
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

SSIS Execute SQL Task using sp_rename giving deadlock issues

All,
We have a job that has 2 steps and both of those steps call an SSIS package
1st package - Loads the data from a SQL server source, to a SQL Server destination tables, say, "TblHistory" is one of them
2nd package - It does a re-name from the History table to the Main table, so below, is how the code looks like in the execute SQL Task:
BEGIN TRANSACTION
EXECUTE sp_rename 'dbo.Tbl', 'TblOld'
EXECUTE sp_rename N'dbo.TblOld.PK_TblId', N'PK_TblIdOld', N'INDEX'
EXECUTE sp_rename 'dbo.TblHistory', 'Tbl'
EXECUTE sp_rename N'dbo.Tbl.PK_TblHistoryId', N'PK_TblId', N'INDEX'
EXECUTE sp_rename 'dbo.TblOld', 'TblHistory'
EXECUTE sp_rename N'dbo.TblHistory.PK_TblIdOld', N'PK_TblHistoryId', N'INDEX'
COMMIT TRANSACTION
In package 1 there are multiple history tables that are being loaded and most of them get renamed in the 2nd package. There is a separate SQL task for each of the history tables. The problem that I am running in to are the deadlock issues. When the 2nd package
runs, it throws this error:
"SQL - Table Rename & Swap for "Tbl" Execute SQL Task Description: Executing the query "BEGIN TRANSACTION EXECUTE sp_rename Tbl..." failed with the following error: "Transaction
(Process ID 60) was deadlocked on lock resources with another process and has been chosen as the deadlock victim."
It's giving me a deadlock issue on the other tasks as well. So, when the job ran today, I am noticing 4 deadlock errors on the 4 different execute SQL tasks in the 2nd package (i.e. the job fails at 2nd step)
Has anyone faced this scenario before?

Why renaming tables? The data do not change. So just load the data to an interim table and push it to the target or may be you do not need it at all - just load the right table.
I admit I fail to capture the overall picture of what you are trying to solve or deliver. But renaming tables is something not usual.
Arthur My Blog

How do I return two values from a stored procedure into an "Execute SQL Task" within SQL Server 2008 R2

Hi,
How do I return two values from a
stored procedure into an "Execute SQL Task" please? Each of these two values need to be populated into an SSIS variable for later processing, e.g. StartDate and EndDate.
Thinking about stored procedure output parameters for example. Is there anything special I need to bear in mind to ensure that the SSIS variables are populated with the updated stored procedure output parameter values?
Something like ?
CREATE PROCEDURE [etl].[ConvertPeriodToStartAndEndDate]
@intPeriod INT,
@strPeriod_Length NVARCHAR(1),
@dtStart NVARCHAR(8) OUTPUT,
@dtEnd NVARCHAR(8) OUTPUT
AS
then within the SSIS component; -
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Below execute statement should work along the parameter mapping which you have provided. Also try specifying the parameter size property as default.
Exec [etl].[ConvertPeriodToStartAndEndDate] ?,?,? output, ? output
Add a script task to check ssis variables values using,
Msgbox(Dts.Variables("User::strExtractStartDate").Value)
Do not forget to add the property "readOnlyVariables" as strExtractStartDate variable to check for only one variable.
Regards, RSingh

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Passing the same input parameter twise in execute sql task

Hi All, I want to insert some values to 3 different tables in sql server. Execute sql task is used to populate three tables. Here is the sql statement.
DECLARE @Dt AS DATE
SET @Dt = ?
INSERT INTO TABLE1 SELECT ?, COL2, COL3 FROM TABLE_A
INSERT INTO TABLE2 SELECT ?, COL2, COL3 FROM TABLE_B
Input parameter is mapped as follows :
Variable name : User::EffectiveDate
Direction : Input Data Type :
Date Parameter name :0
Parameter size :-1
User::EffectiveDate is datetime variable.
When the package is executed, it throws an error.
[Execute SQL Task] Error: Executing the query " " failed with the following error: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.". Possible failure reasons: Problems
with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. I am not sure what I am doing wrong here. If anyone could point me to the right direction, I really appreciate.
Thanks
shamen

To expand on the other answers.
Your SQL command
DECLARE @Dt AS DATE
SET @Dt = ?
INSERT INTO TABLE1 SELECT ?, COL2, COL3 FROM TABLE_A
INSERT INTO TABLE2 SELECT ?, COL2, COL3 FROM TABLE_B
It using 3 input variables. I assume you didn't pass 3 variables and you want @DT to be column 1 in each. In that case you would use:
DECLARE @Dt AS DATE
SET @Dt = ?
INSERT INTO TABLE1 SELECT @Dt, COL2, COL3 FROM TABLE_A
INSERT INTO TABLE2 SELECT @Dt, COL2, COL3 FROM TABLE_B

Same parameter multiple times in Execute SQL Task

Hi all,
i have a fairly long parametrized query that needs to be run within an Execute SQL task. It has only 2 unique parameters, but these need to be used multiple within that query. The connection is OLEDB.
ill simplify my requirement by making up an arbitrary T-SQL "where" clause that will illustrate what i need:
where
x = @param1
and y = @param1
and z > @param2
and w > @param2
moving this into an SSIS execute SQL task will require the following:
where
x = ?
and y = ?
and z > ?
and w > ?
I know i need to specify 4 parameters and remap the same variables multiple times.. like so:
User:aram1   -> 0
User:aram1   -> 1
User:aram2 -> 2
User:aram2 -> 3
isnt there a better way? i ask this because in my real task i have 2 params, each is reused 4 and 5 times respectively and it seems stupid to repeat params like this.

@ _proffy_
you can pass the same variable or value as parameter multiple times sql task.
follow the steps below.
1) type the sql query with parameters in SQL statement tab of sql task editor
2. in the parameter mapping, select the variables.
you can select the same variables more than once.
give the parameter name as 0,1,2,3..... based on variables you require.
do not forget to chooose the appropriate Datatype.
ex:
select * from table1
where a= ?
and b=?
and c= ?
parameters:
Var name               param Name
user::Var1               0
user::Var1               1
user::Var2               2
so the value becomes a=var1, b= var1 and c= var2

Combining package configuration and Execute SQL task at run time

Hi everyone,
I have an issue regarding setting values at run time
I use package configuration to manage different enviroments scenarios (DEV, PROD):
XML file to store the connections string of SSISConfigDB
and the actual values of parameters in that SSISConfig DB tables Filtered by ConfigurationFilter column
Now, one of my packages needs in addition setting at run time value of a flat file name
i used an Execute SQL task - within the task i read into a variable the file name using command line
then, the full path of Flat File Connection is set by expression concatenating the root folder and the variable
the problem is that the variable stays empy! as if the Execute SQL task was never executed!
Am i doing something incorrect? in the package configuration wizard the configured value are only XML file and the connection string of the DB.
to summerize - how can i combine package configuration, default value, Execute SQL task and expression at runtime?

1.EvaluateasExpression=TRUE (Full Path variable)
2. Do you mean to invlole a ISNULL() function in the expression? if so, no
3. Of course i recieve a valid value
4. The Full path expression is evaluated to the root folder - without the portion of the file name
here is the syntax in Execute SQL Task:
truncate table OnErrorFlagTable
Declare @Path varchar(128)
Declare @FileName varchar(128)
Declare @SenderID varchar(5)
Declare @INST_COD varchar(5)
Declare @Flag int = 0
Declare @FileType varchar(2)='01'
Truncate table TraumaRecords
Select @Path = 'C:\RootFolder\'
--***Insert into Temp table the file so we can take his name***--
Create Table #Tmp(Txt Varchar(Max))
Insert Into #Tmp(Txt)
Exec master..xp_cmdshell 'Dir *.txt C:\RootFolder\/b'
select top 1 @Filename = Txt From #Tmp
Where ISNUMERIC(substring(Txt,1,1))=1
order by Txt desc
Insert into OnErrorFlagTable
Select 2,@FileName
Select @FileName as TraumaFileName,@FileType as FileType
Then, in ResultSet TraumaFileName and FileType are mapped
Expression of @TraumaFlatfileFullPath is
@[User::TraumaFlatfilePath]+ @[User::TraumaFlatFileName]
where the variable @[User::TraumaFlatfilePath] is evaluated in variable window (default value)
and it's value is C:\RootFolder\
and @[User::TraumaFlatFileName] is the ResultSet of the ExecuteSQLTask
and for some reason when executed in SSIS return null while in SSMS return the expected value
Can you try making this into a procedure with required parameters and call it from SQL task to see if you get return value correctly? Use OUTPUT parameters for getting back required values
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SQL Server 2008 Execute SQL Task parameter problem

hi, guys
i create a very simply package which only Execute SQL task, set the properties as:
the testing table structure:
create table t(
idx int,
cname varchar(60)
Execute SQL Task setting:
[genaral]
ResultSet: None
ConnectionType: Ado.net
connection:LocalHost.APR11.sa1
SQLsourceType:Direct input
SQLStatement:delete from t where idx=?
[parameter mapping]
variable name: user::idx
direction: input
data type: Int32
parameter name:NewParameterName
parameter size:-1
i hardcode the idx=1, but get error:
SSIS package "test.dtsx" starting.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "delete from t where idx=?" failed with the following error: "Parameter name is unrecognized.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task
SSIS package "test.dtsx" finished: Success.
help me please.
Regards.

Hello,
Here you go
http://decipherinfosys.wordpress.com/2008/03/26/running-parameterized-sql-commands-using-the-execute-sql-task-i/
http://technet.microsoft.com/en-us/library/ms140355.aspx
if you use ADO.NET then the way Execute SQL task take parameter is different then "?".... you have to use @paramter.. Please check the above link
Thanks
http://sqlage.blogspot.com/

Using Union in Execute SQL Task

Similar Messages

Maybe you are looking for