Using variables as variable names

Hello (me again)
I know I can use this[variable] to evaluate a variable name
so it can be used for such things as referring to a movie clip
e.g
this[variable]._x=100;
However... I'm trying to create movieClips with:
var MovieClipName:MovieClip = new MovieClip()
which doesn't work if I use this[variable] instead of
MovieClipName.

Thanks,
I'm having real problems. I'm looping through my movieclips,
as I'd like to load content into them one by one..proceeding to the
next after the first has been loaded.
At the moment I have...
for (var i=1; i<totalImages +1; i++)
this["image" +i].loadMovie("image" +i +".jpg");
bLoaded=0;
bTotal=this["image" +i].getBytesTotal();
while (bLoaded<bTotal)
bLoaded=this["image" +i].getBytesTotal();
This preloader isn't working..as the other images start
loading before the first has completed..bTotal always seems to be 4
which is the number of bytes of an empty movie clip.
How odd

Similar Messages

  • Failed to solve variable web.framesrc.afrPushIframe using path .//IFRAME[@name='afr::PushIframe']/@src

    I get this problem Failed to solve variable web.framesrc.afrPushIframe using path .//IFRAME[@name='afr::PushIframe']/@src
    So far in the posts i only see this problem . Please let us know how to solve this?
    Thanks
    Sankar

    Tses wrote:
    Am I the only one in the world who tried ΟLT 12c with ADF 11g R2 PS3 ?
    :-(Hi! You're not alone :)
    We tried to record some load tests (OpenScript 12.2.0.1 Build 223) for our ADF R2 application.
    But during the playback I had the same error: "Failed to solve variable web.framesrc.afrPushIframe using path .//IFRAME[@name='afr::PushIframe']/@src ".
    Haven't you found the solution yet?
    By the way, when I use operation "Revert to Recorded" for all nodes of my test and playback it again, I see in results that the script has passed without errors, but nothing has changed in database.
    Thanks.
    Natalie

  • Error while using the variable name "VARIABLE" in variable substitution

    Hi Experts,
      I am using variable substitution to have my output filename set as a payload field value. It is working fine when I am using the variable name as fname, subs etc but channel goes in error when I am using the variable name as "VARIABLE". This is probably a reserved word but i would like to know where i can find a detailed documentation on this. Say things to note / restrictions while using variable substitution.
    This is the error in the channel:
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table
    Thanks,
    Diya

    Hi Zevik,
    Thanks for the reply. The output file is created correctly by merely changing the variable name to something else and hence the doubt.
    Below is the configuration:
    Variable Substituition
    VARIABLE    payload:interface_dummy,1,Recordset,1,Header,1,field1,1
    Filename schema : TEST_%VARIABLE%.txt
    Output xml structure:
    <?xml version="1.0" encoding="utf-8" ?>
    - <ns:interface_dummy xmlns:ns="http://training.eu.unilever.com">
    - <ns:Recordset xmlns:ns="http://training.eu.unilever.com">
    - <Header>
      <identifier>HDR</identifier>
      <field1>001</field1>
      <field2>001</field2>
      <field3>R</field3>
      </Header>
    - <Detail>
      <identifier>A</identifier>
      <field1>000000002</field1>
      <field2 />
      <field3>Doretha.Walker</field3>
      </Detail>
    I thimk my configuration is correct as it is working correctly with the variable name change, However, maybe i missed something !

  • Unable to publish in Swf format. Get error message: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

    Unable to publish in Swf format. Get error message reads: 'Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name'. Anyone know how to fix?

    Hi There,
    Can you tell me the Operating System and Captivate version you are using?
    Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
    Regards,
    Mayank

  • When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

    When publishing a captivate I get the message "Swf compilation failed. Note: Please verify if any of the actionscript keywords is used as user variable name." and it won't allow me to publish the Captivate, can anyone help?

    Hi There,
    Can you tell me the Operating System and Captivate version you are using?
    Also can you confirm if you are getting this issue will this one project or all the projects? Try to copy paste this project on a new blank project and then try to publish.
    Regards,
    Mayank

  • Issue with use of shared variables in Crystal Reports 2008 Offline Viewer

    Hi,
    I have a report that contains a number of sub-reports which include drill-down functionality. The report returns data relating to an individual team with the user being able to view top level summary information in each area from the parent report and then drill into the sub-reports to view see more detail. The data returned by the sub-reports is filtered, using sub-report links, based on the team code parameter value given by the user. This parameter field resides in the main report.
    One of the values returned by the main report is the team name. This is passed to each sub-report using a shared variable and each sub-report displays this team name as part of a heading.
    This all works fine in Crystal Reports 2008, but when a report, containing data, is opened using Crystal 2008 Offline Viewer there is a problem with the shared variable. The value is displayed correctly when the user initially drills into the sub-report. However, when the user begins to drill into grouped data within the sub-report the value passed to the sub-report using the shared variable disappears. 
    How can I ensure that, when a report is viewed using Crystal Offline Viewer 2008, the value within the shared variable is not lost when users drill into grouped data within sub-reports
    Thanks
    Stuart

    Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

  • How can I use Server level variables in a business model based report

    hi gems..
    I have declared one server level variable in the BI Analytics repository.
    Now I have made one business model based report.
    In one column I want to use that server level varible.
    I go to the formula tab of that column and then clicked on variable--> session --> put the name of the variable and click ok.
    But when i viewed the report, it is not showing the dates, rather it is showing the date format I chosed i.e DD-MMM-YYYY.
    please help..

    actually the previous problem got resolved...
    Now when I am trying to apply a filter on a particular column using that server variable, then it is showing that the varible has no value definition.
    I have clicked on the filter tab of that column-->add-->variables-->session variables-->then I put the name of the variable-->click OK.
    the following error is comming-
    Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
    Odbc driver returned an error (SQLExecDirectW).
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 23005] The repository variable, Variable_name, has no value definition. (HY000)
    I have made that server variable from manage-->variables-->(right click) create new initialisation block-->gave the name and wrote the query and aslo gave the connection pool name and test that and it worked fine..

  • To use two presentation variables based on the period selection in OBIEE

    Dear All,
    I have period prompt in my report, based on the period prompt selection in my report I need to get the start and end dates of the period and apply in the report filter.
    For e.g. Period Name selected in the prompt is "2010 - Q1" (For this Period, Period Start Date = 01/01/2010 and Period End Date is 30/03/2010, which is not going to be displayed in the prompts).
    How can I get the start and end dates of the period into my report filter. I tried using the presentation variable for the period name, but unable to resolve the requirement.
    Your help is highly appreciated.
    Best Regards,
    Rajesh

    Hi Rajesh,
    Create a report A which will give you the period start date and end date and filter it using the period prompt.
    Then filter the main report using the report A start date and end date, using Filter -> Advanced ->Filter based on results of another request .
    Add the report A in separate section on the dashboard along with main report and hide report A section.
    Thanks,
    Vino

  • How to use a bind variable in a table-validated flexfield

    Hi,
    I want to prepare a table-validated descriptive flexfield, which uses as source a select statement.
    So, in the form "Validation table information" I use as table name the statement:
    (SELECT my_procedure('test_value') FROM DUAL)
    Up to here it works fine.
    But instead of 'test_value' I want to use the value of a field in the form or a value of another flex (using $FLEX$ bind variables).
    Please advice if it is possible to perform this in "table name" statement. I use it in "where/order by" clauses and it works fine.
    Thank you.

    Hi,
    I have posted in the place where you did advise,
    https://forums.oracle.com/thread/2560192
    but they reply there that this is an EBS question, with no much relation to dev tools in general.
    Please, can I continue in this place with this question?
    Thank you.

  • Unable to filter a recordset using a session  variable

    I have a volunteer application page and when the volunteer presses <Submit> their info is saved in a MySQl db table and a session variable is created containing the primary key of their record in the table, control is then passed to a "success page". The success page can access the session variable (I proved this by displaying the session variable on the success page) so my next step was to create a recordset in the success page with a filter using the session variable to select the appropriate row in the table, allowing me to display to the volunteer the info they submitted.
    I set up a test success page which displays the session variable and one field of the volunteer info. When I test this I see the session variable displayed but the corresponding volunteer info field from the recordset is not displayed.
    The volunteer application page is here www.hollisterairshow.com/volunteerapp.php and the successpage is here www.hollisterairshow.com/thanksvol.php
    The code that creates the session variable in the volunteer application page is shown below
    $_SESSION['volunteer_id'] = mysql_insert_id();
    The code to display the session variable in the success page is shown below
    <?php  echo $_SESSION['volunteer_id']; ?>
    The code to display the volunteer info is shown below
    <h1> Thank You <?php echo $row_rsVolunteerApp['firstname']; ?>!! </h1>
    The recordset definition is shown below
    The success page test result is shown below, as you can see the volunteer's first name is not displayed immediately after the "Thank you" message but the session variable holding the correct primary key (41) is shown correctly.
    Does anyone have an idea of what I'm doing wrong?
    Thanks
    Tony

    Where did you put session_start()? It needs to be before the variable is accessed. It's obviously before the line that displays the value in your page, but is it before the SQL query is generated?
    Also, have you checked in phpMyAdmin to see whether volunteernumber 41 has any values in the database?

  • Error while using selection option variable in the selection screen

    Hi All,
    I am facing an issue while using selection option variable in the selection screen for one of my reports.
    Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
    Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
    But when the report is executed we get the following error:
    "System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
    (ETVRGNFR is technical name of the info object Region From)
    Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
    Please give suggestions / alternate solutions to crack this issue.
    Thanks in advance
    Regards
    Priyanka.

    Hi,
    Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
    This is just my view, i am not sure if u are already using this or Char. Variable.
    Cheers.
    Ranga.

  • How to find out if a SQL is using a bind variable or not?

    In order to make a SQL use consistent execution plan, I want to create a profile for a SQL. But I need to know if a SQL is using bind variable or not to create a profile for all the same SQLs except the literal value. How can I do that?
    Thanks in advance

    You can tell if an SQL statement uses a bind variable by looking at the SQL statement.
    If you look in the program that submits the SQL statement you can see how it constructs, prepares, and executes the statement.
    If you are just looking at the SQL in the shared pool then depending on how the statement is written and the setting of database parameters like cursor sharing then it can be more difficult but if you see a constant (actual value) that is a constant. A bind variable would appear as a name in the where clause where that name does not exist any of the tables referenced in the query. Note it is technically possible to create pl/sql variables with the same name as columns in the query but that is poor coding and leads to issues.
    Note - To Oracle two versions of the otherwise same query where one has a constant and the other has a bind variable are not the same query and often produce different plans. This is a common error made by developers new to Oracle when using explain plan. To explain a query that uses bind variables place a ":" in front of the variable name in the SQL submitted to explain plan.
    HTH -- Mark D Powell --

  • How to Set and Use a global variable within a session?

    Dear All,
    I'm new to jsp, and would like to ask how to set and use a global variable within a session?
    Thanks in advance.
    Regards,
    Cecil

    With session.setAttribute("name",object) you can store a Attribute in the session object.
    with session.getAttribute("name") you can get it.
    That's it.
    Regards,
    Geri

  • Problem: Use an ODI variable in a Java Procedure

    Hi and thanks in advance,
    i need to use a project variable in a java procedure i've written. In particular i should read a file (and manage it...), but its name is stored in avariable called #fileName that i refresh each time.
    writing something like:
    <% FileInputStream fis = new FileInputStream(C:\\"+"#filename");
    etc.
    etc.
    %>
    doesn't work...
    How can i use the value of my ODI variable inside the Java code?
    Please, help me if you can...
    Thank you very much.

    Any Idea? Please, this question is blocking me...

  • How to use attributes in variable substitution???:(

    Hi all,
    Could you please help me out in how to use attributes in variable substitution....
    Regards,
    Sundar

    Hi,
    Use Adapter Specific Identifiers , instead of Variable Name substitution.
    Sender File adapter --> Adapter Specific Attributes --> Select File Name
    Reciver File Adapter -->Adapter Specific Attributes --> Select File Name
    In the mapping , use this code in an UDF to change the filename to what you want,
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String filename="YOURFILENAME";
    String rSourceFileName = conf.put(key,filename);
    Regards,
    Bhavesh

  • Use of Input Variables in SQL-Queries Sometimes Not Possible

    Only in simple SELECT-statements the use of input variables ([%0], [%1], etc.) work without problems.
    In more complex queries the use of these variables is not possible (e.g. SELECT-statements with sub-queries, sometimes when UNION is used - but I couldn't find any general rule when the problems will arise; sometimes two different queries with the same query-structure behave in different ways when these variables are used).
    In these cases the query is not executed - not even the input-window to enter values into the input variables is displayed. The query stops with some strange error-messages in the status line. These error-messages doesn't have any relation to the actual query - sometimes it refers to field-names never used in the query or refers to syntax error which do not exist.
    If the input variables are replaced by constant values there are no problems so there can't be any syntax errors - the only difference is the presence or absence of input variables.
    Example:
      provided that the queries have a certain complexity
      SELECT ...
      FROM   ... OINV Tx ...
      WHERE  ... Tx.DocDate >= [%0] ...
      does not work,
      SELECT ...
      FROM   ... OINV Tx ...
      WHERE  ... Tx.DocDate >= '1.1.2007' ...
      works!
    Does anybody have run into the same problem and now if it is a bug of SAP-BO or an error on behalf of the user? Does anybody know a way to correct the problem?
    Thanks in advance!
    Frank
    By the way: Are there any rules where exactly input variables can be used in a query?
    Only in SELECT-statements? Where there exactly?
    In statements outside of SELECT?

    Only SAP Partners Can access service.sap.com/notes, but I think it is possible to search in them from the customer portal as well.
    Here are summary of the two notes mentioned before this:
    730960:
    <i>
    The following query is an example for how to define variables in long
    queries rather than using "Fixed Declares".
    You need to use exactly the same template as follows, do not delete
    "comments" from this query.
    The only changes you need to do :
    1. In the first and in the fifth rows you need to select the table to which you would like to relate the variable e.g. in this example, the variable is related to the table VPM1 - 'Payments to Vendors - Rows'.
    2. In the fourth and in the eighth rows you need to select the field to which you would like to define the variables e.g. in this example, the variable is the field 'DueDate'.
    /SELECT FROM [dbo].[VPM1] T0/
    declare  @fromdate as datetime
    /* WHERE */
    set @fromdate = /* T0.DueDate */ '[%0]'
    /SELECT FROM [dbo].[VPM1] T1/
    declare  @tilldate as datetime
    /* WHERE */
    set @tilldate = /* T0.DueDate */ '[%1]'
    select  OVPM.docnum, VPM1.dueDate,VPM1.CheckNum, VPM1.Branch,
    VPM1.BankCode, VPM1.CheckSum, OVPM.CardName,
    case
    when OPCH.docnum is null then VPM2.docEntry
    else OPCH.docnum
    end as 'docnum'
    from OVPM INNER join VPM1 on OVPM.docnum = VPM1.docnum
    left join  VPM2 LEFT JOIN OPCH ON VPM2.DocEntry = OPCH.DocEntry
    on OVPM.docnum = VPM2.docnum
    where OVPM.Canceled = 'N' AND VPM1.DueDate >=@fromdate AND
    VPM1.DueDate <=@tilldate
    </i>
    955295:
    <i>
    Using SAP Business One Survey Variables (parameters) in a 'Set' SQL Statement can give an error in the Query Generator.
    For Example:
    Declare @Num as numeric(2)
    Set @Num = [%0]
    Select T0.DocNum
    From ORDR T0
    Where DocNum = @Num
    Other terms
    query, SQL, parameter, survey, variable, query generator, set, declare, [%0], table, error, SAP Business One
    Reason and Prerequisites
    FAQ
    Solution
    In such cases you need to put in an SQL remark statement a reference field in the DB for the Survey Variable (any field).
    For Example: (to make the above query work)
    Declare @Num as numeric(2)
    Set @Num = /* T0.DocNum */ [%0]
    Select T0.DocNum
    From ORDR T0
    Where docnum = @Num
    </i>

Maybe you are looking for