Using XL reporter view in query generator

is it possible to use XL report views in query generator ?

Yes, they XLR views start with ixv.
Jim

Similar Messages

Problem on using Crystal Report Viewer on windows application ("specified type is not valid ")

Hi
I am having problem on using Crystal Report Viewer on one of my windows application.
I am not sure how to put the Crystal Report Viewer 11 Control onto the tool box.
I could found a Crystal Report Viewer control on my computer, but it is version 8.5.
I have also found another one which is Called Crytal ActiveX Report Viewer, i don't think it is the one I can use. As when I try to load a dummy report on to the Crytal ActiveX Report Viewer, It return an error. "specified type is not valid"
Please see the Code sample below.
private sub loadReport()
     Dim r as New ReportDocument
     'v is the name of the Crystal ActiveX Report Viewer Control
     r.Load("C:\Report1.rtp")
     v.ReportSource(r) <---It throw error on this line.
End Sub
Could you give me some advice about what have I done wrong, How to check if I have set up the Crystal Report Component correctly in my Visual Studio 2005 Standard edition.
Thanks in advances.
Many thanks
Chi

VS 2005 Standard and Express editions do not come with Crystal Reports; only the Professional and higher editions will have CR bundled. However, I believe you can purchase CR XI R2 Developer and it will give you the components you need to create a VS .NET 2005 application using the Standard edition.
-MJ

Can i use crystal reports standard to query ODBC datasources

Post Author: Andy Forrest
CA Forum: Data Connectivity and SQL
Dear all,
I'm struggling to identify if i can use crystal reports standard to query ODBC data-sources, the only information i can find is the following :-
An intuitive solution that provides basic report design functionality off of PC-based data sources, Crystal Reports XI Standard Edition will provide you with access to data stored in personal data sources.
This gives the impression that i cant access any data other than local data, can anyone give me a definitive answer or point me to somewhere that explains in a little more detail. We are about to purchase some copies but need to ensure crystal reports standard can access ODBC data sources. We are replacing crystal reports 8 standard edition and need to ensure previous reports will still run.
Thanks in advance for any assistance.
Cheers
Andy

Post Author: foghat
CA Forum: Data Connectivity and SQL
Well, you can certainly connect to ODBC with Crystal XI Developer. I'd be very surprised if you couldn't with the Standard version as well. Not the definitive answer you were looking for, I suppose.

How to use Crystal report viewer in a portlet based web application

I am using JRC to view crystal reports in porlet based web application. Following is the code in JSP
<%@ page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase" %>
<portlet:defineObjects />
<%
     // This sample code calls methods from the CRJavaHelper class, which
     // contains examples of how to use the BusinessObjects APIs. You are free to
     // modify and distribute the source code contained in the CRJavaHelper class.
     try {
          String reportName = "ProactiveEventsSummaryData.rpt";
          ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
          if (clientDoc == null) {
               // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
               // tag can be removed to open the reports as Java resources or using an absolute path
               // (absolute path not recommended for Web applications).
               clientDoc = new ReportClientDocument();
               //clientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
                              clientDoc.setReportAppServer("inproc:jrc");
               // Open report
               clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
               // Store the report document in session
               session.setAttribute(reportName, clientDoc);
          // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
               // Create the CrystalReportViewer object
               CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
               String reportSourceSessionKey = reportName+"ReportSource";
               Object reportSource = session.getAttribute(reportSourceSessionKey);
               if (reportSource == null)
                    reportSource = clientDoc.getReportSource();
                    session.setAttribute(reportSourceSessionKey, reportSource);
               //     set the reportsource property of the viewer
               crystalReportPageViewer.setReportSource(reportSource);
               // Apply the viewer preference attributes
               // Process the report
               crystalReportPageViewer.processHttpRequest(request, response, application, null);
          // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
     } catch (ReportSDKExceptionBase e) {
         out.println(e);
%>
With this code , report gets displayed in the portlet but none of the actions on thre report like next page click , search button , opening subreport , clicking on drill-downs are working . The error in the explorer console is as shown below
Error: CrystalViewerCrystalEvent is not defined
javascript:CrystalViewerCrystalEvent('CrystalViewer',%20'tb=next')
PageSource of the web page shows the CrystalViewerCrystalEvent javascript function defined but for somereason its not recognized by the portlet. Has anyone worked on displaying crystalreports in a portlet ?

Code attached
<%@ page import="com.crystaldecisions.report.web.viewer.CrystalReportViewer,
com.crystaldecisions.sdk.occa.report.application.OpenReportOptions,
com.crystaldecisions.sdk.occa.report.application.ReportClientDocument,
com.crystaldecisions.sdk.occa.report.lib.ReportSDKExceptionBase" %>
<portlet:defineObjects />
<%
     // This sample code calls methods from the CRJavaHelper class, which
     // contains examples of how to use the BusinessObjects APIs. You are free to
     // modify and distribute the source code contained in the CRJavaHelper class.
     try {
          String reportName = "ProactiveEventsSummaryData.rpt";
          ReportClientDocument clientDoc = (ReportClientDocument) session.getAttribute(reportName);
          if (clientDoc == null) {
               // Report can be opened from the relative location specified in the CRConfig.xml, or the report location
               // tag can be removed to open the reports as Java resources or using an absolute path
               // (absolute path not recommended for Web applications).
               clientDoc = new ReportClientDocument();
               //clientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
                              clientDoc.setReportAppServer("inproc:jrc");
               // Open report
               clientDoc.open(reportName, OpenReportOptions._openAsReadOnly);
               // Store the report document in session
               session.setAttribute(reportName, clientDoc);
          // ****** BEGIN CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
               // Create the CrystalReportViewer object
               CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
               String reportSourceSessionKey = reportName+"ReportSource";
               Object reportSource = session.getAttribute(reportSourceSessionKey);
               if (reportSource == null)
                    reportSource = clientDoc.getReportSource();
                    session.setAttribute(reportSourceSessionKey, reportSource);
               //     set the reportsource property of the viewer
               crystalReportPageViewer.setReportSource(reportSource);
               // Apply the viewer preference attributes
               // Process the report
               crystalReportPageViewer.processHttpRequest(request, response, application, null);
          // ****** END CONNECT CRYSTALREPORTPAGEVIEWER SNIPPET ****************
     } catch (ReportSDKExceptionBase e) {
         out.println(e);
%>
Edited by: teethoma on Nov 30, 2009 10:06 AM

How to use SetFormula() using crysatl report viewer

Dear All,
I am using crystal report X1. From the application I open the report using report viewer. In the report am using some formula fields. How can I pass the formula form the application. Herewith I am giving the code snippet of crystal report related operation.
IApplicationPtr                     m_Application;
IReportPtr                          m_ReportType;
IExportOptionsPtr                m_ExportOptions;
VARIANT                         dummy;
m_Application.CreateInstance("CrystalRuntime.Application");
m_ReportType = m_Application->OpenReport("D:
DB_Report
Report.rpt");
m_Viewer.SetReportSource(m_ReportType);
m_Viewer.ViewReport();
Please help me out..
Thanks in advance

Hello,
I had a look around for samples I may have and although the below code is adding the formulae at runtime it's basically the same thing.
It would look something like this:
void ReportView::InitReport()
    // Initialize our Application instance
    HRESULT hr = CoCreateInstance(CLSID_Application, NULL, CLSCTX_INPROC_SERVER , IID_IApplication, (void **) &m_Application);
    ASSERT(SUCCEEDED(hr));
void ReportView::AddDetailFormulas()
    ISectionPtr pSection = GetReportSection(sectionNum);
    IFormulaFieldDefinitionsPtr pFormulaFields = 0;
    m_Report->get_FormulaFields((IFormulaFieldDefinitions**) &pFormulaFields);
    // A field must be recurring if you want to group on a field or
    // automatically bind it to a data source.
    // Putting "WhileReadingRecords" into the formula text makes the formula
    // into a recurring field.
    CString Recur = CString(L"WhileReadingRecords;" +
                           (CString)__toascii(13) +
                           (CString)__toascii(10));
    // Add the formulas to the formula fields collection
    CString CStrText = Recur + CString(L"Space(10)");
    BSTR strText = CStrText.AllocSysString();
    BSTR objName = SysAllocString(L"Player");
    PlayerFormula = pFormulaFields->Add(objName, strText);
    SysReAllocString(&objName, L"Team");
    TeamFormula = pFormulaFields->Add(objName, strText);
    SysReAllocString(&objName, L"Year");
    YearFormula = pFormulaFields->Add(objName, strText);
    SysFreeString(strText);
    CStrText = Recur + CString(L"$0.0");
    strText = CStrText.AllocSysString();
    SysReAllocString(&objName, L"Salary");
    SalaryFormula = pFormulaFields->Add(objName, strText);
    SysFreeString(objName);
Intelli-sense should show you the other methods if you want to simply change the formula text.
Searching the RDC samples on our site should give more Visual Basic sample, the methods will be the same just the syntax will b e different. Serch craxdrt.tlh for more info on which methods and classes are available.
Thank you
Don

I couldn't use Crystal Report Viewer Control in my ASPX page.

Please I'm having a problem with crystal report viewer control which I couldn't resolve. I'm using VS 2008 and Framework 3.5.
I building an ASP web application and when I add a CrystalReportViewer to my ASPX page I'm getting the following
error.
"Error 20 Type 'CrystalDecisions.Web.CrystalReportViewer' is not defined."
I think maybe because I'm not having the right reference file. I'm using Crystal Reports 2008 and also I installed the following
Service Packs:
cr121_redist_install
CR2008-SP1
CR2008SP1-Fixes 1 and 2
cr121_clickonce
I check all the reference files in my project and they are as follow:
CrystalDecisions.CrystalReports.Engine (12.0.2000.0)
C:\Program Files\Business Objects\Common\4.0\managed\dotnet2\CrystalDecisions.CrystalReports.Engine.dll
CrystalDecisions.Enterprise.Framework (12.0.1100.0)
C:\Program Files\Business Objects\Common\4.0\managed\CrystalDecisions.Enterprise.Framework.dll
C:\Program Files\Business Objects\Common\4.0\managed\CrystalDecisions.Enterprise.InfoStore.dll (12.0.1100.0)
C:\Program Files\Business Objects\Common\4.0\managed\dotnet2\CrystalDecisions.ReportSource.dll (12.0.2000.0)
C:\Program Files\Business Objects\Common\4.0\managed\dotnet2\CrystalDecisions.Shared.dll (12.0.2000.0)
Please Why I'm getting this problem? How I can resolve it?
Thanks.

If you have a viewer on one of your forms, delete it off the form and re-add it, ensuring that the crystalreports.web assembly referenced in your project is version 12.
Ludek

Not right data when row_number used in inner-view sql query...

Hi ,
I use the below sql statement which displays the right data
select CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE , SUM_POSOTITA , row_number() over(partition by code_farmakou order by sum_posotita desc) from
(SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES ,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_AT_SINT_CLINIC A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_AT_SINT_EX_IATR A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_AT_SINT_FOREON_MS A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_GEN_SINT_KLIN A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_GEN_SINT_EX_IATR A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS)The data are:
CODE_FARMAKOU                            EMP_NAME                                                                         PACKTYPE                     PACKSIZE                  SUM_POSOTITA ROW_NUMBER()OVER(PARTITIONBYCO
0000002419                               FACTREL INJECTION                                                                VIAL                         2 ML                                 5                              1
0000014071                               DOPAMINE HYDROCHLORIDE                                                           VIAL                         5 ML X 25                           30                              1
0000086289                               DETUSSIN EXPECTORANT                                                             BOT                          120 ML                               3                              1
1000000760                               DEPON                                                                            BT                           20(BLIST2X10)                        2                              1
1000000760                               DEPON                                                                            BT                           20(BLIST2X10)                        1                              2
1000003279                               MOXACEF                                                                          BT                           40(BLIST10X4)                       45                              1
1000003279                               MOXACEF                                                                          BT                           40(BLIST10X4)                        1                              2
1000003279                               MOXACEF                                                                          BT                           40(BLIST10X4)                        1                              3
1000014127                               DEPON VIT. C                                                                     BT                           2TUBX10                              6                              1
1000014127                               DEPON VIT. C                                                                     BT                           2TUBX10                              2                              2
1000016655                               KABIVEN                                                                          BT                           50ÖÕÓ.×1,7ML                        21                              1
1000016655                               KABIVEN                                                                          BT                           50ÖÕÓ.×1,7ML                         2                              2However , when i use the below statement , in order not to display the row_number (so i use row_number function in inner-view) the data are different--in different order... why is that????
select CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE , SUM_POSOTITA from
select CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE , SUM_POSOTITA , row_number() over(partition by code_farmakou order by sum_posotita desc) from
(SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES ,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_AT_SINT_CLINIC A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_AT_SINT_EX_IATR A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_AT_SINT_FOREON_MS A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_GEN_SINT_KLIN A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS
UNION ALL
SELECT CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, TO_DATE(DATES_EKTELESIS,'DD/MM/RRRR') DATES,SUM(POSOTITA) SUM_POSOTITA
          FROM EKTELESI_GEN_SINT_EX_IATR A, MITROO_FARMAKOU B
           WHERE CODE_FARMAKOU = FARMAK_CODE
           GROUP BY CODE_FARMAKOU,EMP_NAME,PACKTYPE,PACKSIZE, DATES_EKTELESIS)
)and its data are:
CODE_FARMAKOU                            EMP_NAME                                                                         PACKTYPE                     PACKSIZE                  SUM_POSOTITA
1000016655                               KABIVEN                                                                          BT                           50ΦΥΣ.Χ1,7ML                        21
1000016655                               KABIVEN                                                                          BT                           50ΦΥΣ.Χ1,7ML                         2
1000000760                               DEPON                                                                            BT                           20(BLIST2X10)                        2
1000014127                               DEPON VIT. C                                                                     BT                           2TUBX10                              2
1000003279                               MOXACEF                                                                          BT                           40(BLIST10X4)                       45
0000014071                               DOPAMINE HYDROCHLORIDE                                                           VIAL                         5 ML X 25                           30
0000086289                               DETUSSIN EXPECTORANT                                                             BOT                          120 ML                               3
1000014127                               DEPON VIT. C                                                                     BT                           2TUBX10                              6
1000003279                               MOXACEF                                                                          BT                           40(BLIST10X4)                        1
1000003279                               MOXACEF                                                                          BT                           40(BLIST10X4)                        1
0000002419                               FACTREL INJECTION                                                                VIAL                         2 ML                                 5
1000000760                               DEPON                                                                            BT                           20(BLIST2X10)                        1NOTE :Sorry, I tried to pose some sample data using the "with" statement but i couldn't...the error ORA-32035 : unreferenced query name defined in WITH clause was displayed..
Regards,
Simon

The optimizer has, well, optimized out the row_number because you never refer to its value in the outermost query.
sql>select deptno, cnt, row_number() over (order by cnt desc) rn
2    from (select deptno, count(*) cnt
3            from emp
4           group by deptno);
   DEPTNO       CNT        RN
       30         6         1
       20         5         2
       10         3         3
3 rows selected.
-- here because we include rn in the outermost query,
-- the results are still ordered based on the analytical function result
sql>select deptno, cnt, rn
2    from (select deptno, cnt, row_number() over (order by cnt desc) rn
3            from (select deptno, count(*) cnt
4                    from emp
5                   group by deptno));
   DEPTNO       CNT        RN
       30         6         1
       20         5         2
       10         3         3
3 rows selected.
-- but if we don't include rn in the outermost query,
-- the optimizer leaves out the window sort and the results are in a different order
sql>select deptno, cnt
2    from (select deptno, cnt, row_number() over (order by cnt desc) rn
3            from (select deptno, count(*) cnt
4                    from emp
5                   group by deptno));
   DEPTNO       CNT
       10         3
       20         5
       30         6
3 rows selected.This just reinforces the point that if you want your results in a particular order, you need to provide an ORDER BY clause - don't rely on execution plans to do your sorting for you.

Problem in Display the Crystal report using Crystal report Viewer 2008

Hi All,
I have developed crystal web project with crystal report using Eclipse IDE. when I deploy this web application using Tomcat server 6.0 in Windows xp, Windows Vista.. It is working fine..
But When I deploy it into Windows 2000 server , I am not able to see Last 2 columns of the report page in the Viewer.
But When I tried to Export as Excel, I got all the datas in the Report and also when I preview the report in Eclispe IDE using crystal viewer plugin it is working fine in Windows 2000 server also..
Thanks in Advance for your help..
Regards,
SathiyaMBPS

Windows 2000 is not supported in current versions of CR. Check the platforms PDF file.

Using Interactive Report with SQL query accessing tables via db link

Is there a known issue with using the interactive report in version 3.1.2.00.02 with SQL that is accessing tables via a database link? I get the error 'not all variables bound', I do not get this error when using the standard report for the same SQL?
Thanks,
Edited by: [email protected] on May 26, 2009 2:59 PM

Varad,
Good question, failed to check that. In fact there are errors. Dump file c:\oraclexe\app\oracle\admin\xe\bdump\xe_s002_3640.trc
Mon Jun 15 08:48:11 2009
ORACLE V10.2.0.1.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
Windows XP Version V5.1 Service Pack 3
CPU : 2 - type 586, 1 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1051M/2038M, Ph+PgF:2273M/3934M, VA:1302M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 16
Windows thread id: 3640, image: ORACLE.EXE (S002)
*** ACTION NAME:(PAGE 2) 2009-06-15 08:48:11.743
*** MODULE NAME:(APEX:APPLICATION 112) 2009-06-15 08:48:11.743
*** SERVICE NAME:(SYS$USERS) 2009-06-15 08:48:11.743
*** CLIENT ID:(ADMIN:232384011651572) 2009-06-15 08:48:11.743
*** SESSION ID:(24.931) 2009-06-15 08:48:11.743
*** 2009-06-15 08:48:11.743
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_LdiDateFromArray+55] [PC:0x608B04F3] [ADDR:0x0] [UNABLE_TO_WRITE] []
Current SQL statement for this session:
select Stage,Procedure,Stp,FW,Reslt,MSG,date_run
from bi_msg_VW@dwitnm
order by 1
----- PL/SQL Call Stack -----
object line object
handle number name
2FE1EA14 1207 package body SYS.DBMS_SYS_SQL
2FE1F064 328 package body SYS.DBMS_SQL
2ABDC520 5097 package body APEX_030200.WWV_RENDER_REPORT3
2BD5E55C 1538 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
2BD5E55C 366 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
335BDA88 11190 package body APEX_030200.WWV_FLOW
2BDBD1C8 255 procedure APEX_030200.F
2AB58D10 30 anonymous block
----- Call Stack Trace -----
I didn't include the call stack, it is too large. Now I'm even more puzzled that the IR would work while a sql report would fail.
Bob

How to refresh report using Crystal Report Viewer 2008

Hi,
Please help me I dont now how to refresh report, te tab "refresh" is not active !!!!
Jacek

Hi Jacek,
You can only refresh reports that are hosted on Business Objects servers (such as Crystal Reports Server 2008).
http://www.businessobjects.com/product/catalog/crystalreports_viewer/
Cheers,
Fritz

How to view multiple reports using crystal reports 2008

Hi ,
I am working on vb6 project where in i am trying to generate reports using crystal reports 2008.
For this , i am making use of Interop Form Wrapper class in vb6.
I have a business requirement where in i need to view multiple reports on my screen.
please suggest me as to how this can be achieved.
Thanks in Advance
Regards,
Ramnath

Hi Ludek,
I am directly now using crystal report viewer control in my vb6 project.
As mentioned in previous mail, i have created a Interop Wrapper class over crystal report viewer control in .Net using visual studio 2008 and i am making use of wrapper class in my vb6 project.
I am able to access all the properties that have been defined in my Interop wrapper Class but the only stuff i need is to view multiple reports generated one after the another for a single button click Event.
Please find below the code that iam using to load and generate reports.
Note:
1. frm is the instance of my Interop Wrapper Class built over CR viewer control
2. All the user defined methods of Wrapper class that you see below will internally call the actual crystalreportviewer   properties defined in my Wrapper class
Say for e.g   frm.DisplayToolbar(True) will internally execute crystalreportViewer1.DisplayToolbar = True
frm.SetReportSource(strRptFilePath,0)
frm.SetSelectionFormula(strrecordSelectionFormula)
frm.DisplayToolbar(True)
frm.ShowExportOption(True)
frm.ShowPrintOption(True)
frm.ShowRefreshOption(True)
frm.ShowPAgeNavigateOption(True)
frm.ShowZoomOption(True)
frm.ShowParameterPanelOption(True)
frm.Show()
Thanks in Advance
Regards,
Ramnath

Very high parse times for query rewrite using cube materialized views

We recently upgraded to version 11.2.0.2 (both AWM and Oracle database server). We are using cube materialized views with query rewrite enabled. Some observations of changes that took place when we rebuilt all the dimensions and cubes in this version:
1. Queries against the base tables take about 35 seconds to parse. Then they execute in a tenth of a second. Even simple queries that just get a sum of the amount from the fact table (which is joined to all the dimensions) takes that long to parse. Once parsed, the queries fly.
2. I noticed that the materialized views used to use grouping sets in the group by clause in version 11.2.0.1, but now they use group by rollup, rollup, rollup...
If we disable query rewrite on the MV or for my session, parse times drop to less than a second. Ideas?

There does appear to be a slow down in parse times between 11.1.0.7 and 11.2. We are still investigating this, but in the meantime here is a way to force the code in 11.2 to generate a GROUPING SETS clause instead of the new ROLLUP syntax.
The trick is to create a dummy hierarchy containing only the leaf level. This is necessary for all dimensions that currently have a single hierarchy. As a simple example I created a dimension, PROD, with three levels, A, B, and C, in a single hierarchy. I then created a one dimensional cube, PC. Here is the SELECT statement for the MV in 11.2. Note the ROLLUP clause in the GROUP BY.
SELECT
GROUPING_ID(T3."CLASS_ID", T3."FAMILY_ID", T3."ITEM_ID") SYS_GID,
(CASE GROUPING_ID(T3."CLASS_ID", T3."FAMILY_ID", T3."ITEM_ID")
   WHEN 3
   THEN TO_CHAR(('A_' || T3."CLASS_ID") )
   WHEN 1
   THEN TO_CHAR(('B_' || T3."FAMILY_ID") )
   ELSE TO_CHAR(('C_' || T3."ITEM_ID") ) END)     "PROD",
T3."CLASS_ID" "D1_PROD_A_ID",
T3."FAMILY_ID" "D1_PROD_B_ID",
T3."ITEM_ID" "D1_PROD_C_ID",
SUM(T2."UNIT_PRICE")     "PRICE",
COUNT(T2."UNIT_PRICE") "COUNT_PRICE",
COUNT(*) "SYS_COUNT"
FROM
GLOBAL."PRICE_AND_COST_FACT" T2,
GLOBAL."PRODUCT_DIM" T3
WHERE
(T3."ITEM_ID" = T2."ITEM_ID")
GROUP BY
(T3."CLASS_ID") ,
ROLLUP ((T3."FAMILY_ID") , (T3."ITEM_ID") )Next I modified the dimension to add a new hierarchy, DUMMY, containing just the leaf level, C. Once I have mapped the new level and re-enabled MVs, I get the following formulation.
SELECT
GROUPING_ID(T3."CLASS_ID", T3."FAMILY_ID", T3."ITEM_ID") SYS_GID,
(CASE GROUPING_ID(T3."CLASS_ID", T3."FAMILY_ID", T3."ITEM_ID")
   WHEN 3
   THEN ('A_' || T3."CLASS_ID")
   WHEN 1
   THEN ('B_' || T3."FAMILY_ID")
   WHEN 0
   THEN ('C_' || T3."ITEM_ID")
   ELSE NULL END) "PROD",
T3."CLASS_ID" "D1_PROD_A_ID",
T3."FAMILY_ID" "D1_PROD_B_ID",
T3."ITEM_ID" "D1_PROD_C_ID",
SUM(T2."UNIT_PRICE")     "PRICE",
COUNT(T2."UNIT_PRICE") "COUNT_PRICE",
COUNT(*) "SYS_COUNT"
FROM
GLOBAL."PRICE_AND_COST_FACT" T2,
GLOBAL."PRODUCT_DIM" T3
WHERE
(T3."ITEM_ID" = T2."ITEM_ID")
GROUP BY
GROUPING SETS ((T3."CLASS_ID") , (T3."FAMILY_ID", T3."CLASS_ID") , (T3."ITEM_ID", T3."FAMILY_ID", T3."CLASS_ID") )This puts things back the way they were in 11.1.0.7 when the GROUPING SETS clause was used in all cases. Note that the two queries are logically equivalent.

How to print the report directly without previewing (report viewer) using c# windows application

Hi,
Currently, we are using crystal report to all of our reporting applications, but since I/users have encountered some issues about CR's speed to load only a simple report, maybe it is now time for us to adopt a new reporting environment in which I think SSRS
can fill this problem.
To start with, I have here a sample code, that uses the crystal report to print the report directly without previewing:
csCashInvoiceCal csCashCal; --Crystal report name .rpt
dsCsReceipt dsCs; --created dataset
DataTable u;
DataRow s;
private System.Drawing.Printing.PrintDocument printDocument1;
private System.Windows.Forms.PrintDialog printDialog1;
ParameterValues paramValue;
ParameterDiscreteValue discreteValue;
ParameterFieldDefinition fieldDefinition;
private void btnPrint_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt2();
print2();
csCashCal.Close();
this.Cursor = Cursors.Default;
private void loadReceipt2()
dsCs = new dsCsReceipt(); --created dataset
u = dsCs.Tables.Add("DtCsReceipt");
u.Columns.Add("Qty", Type.GetType("System.String"));
u.Columns.Add("UOM", Type.GetType("System.String"));
u.Columns.Add("Description", Type.GetType("System.String"));
u.Columns.Add("UnitPrice", Type.GetType("System.String"));
u.Columns.Add("Discount", Type.GetType("System.String"));
u.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
s = u.NewRow(); double.TryParse(dgvDesc.Rows[i].Cells[Discount2.Name].Value.ToString(), out discount);
s["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
s["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
s["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
s["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
s["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
s["Discount"] = "";
s["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
u.Rows.Add(s);
catch (Exception) { }
csCashCal = new csCashInvoiceCal();
csCashCal.SetDataSource(dsCs.Tables[1]);
//csCashCal.Refresh();
loadParameter2();
private void loadParameter2()
ParameterFieldDefinitions paramFieldDefinitions;
paramValue = new ParameterValues();
discreteValue = new ParameterDiscreteValue();
paramFieldDefinitions = csCashCal.DataDefinition.ParameterFields;
discreteValue.Value = date;
fieldDefinition = paramFieldDefinitions["Date"];
commonParam();
discreteValue.Value = txtcsno.Text;
fieldDefinition = paramFieldDefinitions["InvoiceNo"];
commonParam();
discreteValue.Value = txtNameTo.Text;
fieldDefinition = paramFieldDefinitions["CustomerName"];
commonParam();
discreteValue.Value = txtAdd.Text;
fieldDefinition = paramFieldDefinitions["CustomerAddress"];
commonParam();
------other parameters----
private void commonParam()
paramValue.Clear();
paramValue.Add(discreteValue);
fieldDefinition.ApplyCurrentValues(paramValue);
private void print2()
using (printDocument1 = new System.Drawing.Printing.PrintDocument())
using (this.printDialog1 = new PrintDialog())
//this.printDialog1.UseEXDialog = true;
this.printDialog1.Document = this.printDocument1;
DialogResult dr = this.printDialog1.ShowDialog();
if (dr == DialogResult.OK)
int nCopy = this.printDocument1.PrinterSettings.Copies;
int sPage = this.printDocument1.PrinterSettings.FromPage;
int ePage = this.printDocument1.PrinterSettings.ToPage;
string PrinterName = this.printDocument1.PrinterSettings.PrinterName;
try
csCashCal.PrintOptions.PrinterName = PrinterName;
csCashCal.PrintToPrinter(nCopy, false, sPage, ePage);
printcount++;
//saveCountPrint();
catch (Exception err)
MessageBox.Show(err.ToString());
This is only a simple sales receipt application that uses dgv and textboxes to push its data to dataset to the crystal report, a simple one but there are instances that it is very slow.
But I'm having trouble implementing this using SSRS, since I'm only new to this one, wherein I created the report using report wizard, with two button options inside the form for print preview or direct print selection. Actually, it is very easy to implement
with print preview because it uses reportviewer. My problem is that how can I print the report directly without using a reportviewer?
So here is my code so far which I don't know what's next:
private void button2_Click(object sender, EventArgs e)
this.Cursor = Cursors.WaitCursor;
loadReceipt3();
//print3();
this.Cursor = Cursors.Default;
ReportParameter[] parameter = new ReportParameter[11];
private void loadParameter3()
parameter[0] = new ReportParameter("InvoiceNo", txtcsno.Text);
parameter[1] = new ReportParameter("Date", date);
parameter[2] = new ReportParameter("CustomerTin", txtTin.Text);
parameter[3] = new ReportParameter("CustomerName", txtNameTo.Text);
parameter[4] = new ReportParameter("CustomerAddress", txtAdd.Text);
parameter[5] = new ReportParameter("Agent", agent);
parameter[6] = new ReportParameter("Discount", "Discount: ");
parameter[7] = new ReportParameter("TotalDiscount", lblDiscount.Text + "%");
parameter[8] = new ReportParameter("TotalSales", rdtotal);
parameter[9] = new ReportParameter("Tax", rdtax);
parameter[10] = new ReportParameter("TotalAmount", rdnet);
private void loadReceipt3()
DataSet dsrs = new DataSet();
DataTable dtrs = new DataTable();
DataRow drs;
dtrs.Columns.Add("Qty", Type.GetType("System.String"));
dtrs.Columns.Add("UOM", Type.GetType("System.String"));
dtrs.Columns.Add("Description", Type.GetType("System.String"));
dtrs.Columns.Add("UnitPrice", Type.GetType("System.String"));
dtrs.Columns.Add("Discount", Type.GetType("System.String"));
dtrs.Columns.Add("Amount", Type.GetType("System.String"));
try
for (int i = 0; i < dgvDesc.Rows.Count - 1; i++)
drs = dtrs.NewRow();
drs["Qty"] = double.Parse(dgvDesc.Rows[i].Cells[Qty.Name].Value.ToString());
drs["UOM"] = dgvDesc.Rows[i].Cells[Uom2.Name].Value.ToString();
drs["Description"] = invcode + dgvDesc.Rows[i].Cells[Description.Name].Value.ToString();
drs["UnitPrice"] = dgvDesc.Rows[i].Cells[UnitPrice.Name].Value.ToString();
if (discount != 0)
drs["Discount"] = "(" + string.Format("{0:0.##}", discount) + "%)";
else
drs["Discount"] = "";
drs["Amount"] = dgvDesc.Rows[i].Cells[Amount2.Name].Value.ToString();
dtrs.Rows.Add(s);
catch (Exception) { }
int addtlRow = 7;
if (addtlRow > (count - 1))
addtlRow = addtlRow - (count - 1);
for (int i = 0; i < addtlRow; i++)
dtrs.Rows.Add();
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
localreport.Refresh();
//what's next....
So what's next after local..refresh()? Actually, I have googled a lot but I didn't found the exact solution that I'm looking for which confuses me a lot.
Anyway I'm using VS 2010 with sql server 2012 express.
You're help will be greatly appreciated.
Thank you,
Hardz

After some further studies with ReportViewer controls and with the use of this tutorial @ : http://msdn.microsoft.com/en-us/library/ms252091.aspx, which helps me a lot on how to print a report without using a report viewer, I found out what is missing
with my code above and helps solve my question.
Here's the continuation of the code above:
private void loadReceipt3()
loadParameter3();
LocalReport localreport = new LocalReport();
localreport.ReportPath = @"..\..\SsrsCashReceipt.rdlc";
localreport.SetParameters(parameter);
localreport.DataSources.Clear();
localreport.DataSources.Add(new ReportDataSource("dsSalesReceiptSsrs", dtrs));
Export(localreport);
print4();
private IList<Stream> m_streams;
private int m_currentPageIndex;
private void Export(LocalReport report)
string deviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
Warning[] warnings;
m_streams = new List<Stream>();
report.Render("Image", deviceInfo, CreateStream,
out warnings);
foreach (Stream stream in m_streams)
stream.Position = 0;
private void print4()
if (m_streams == null || m_streams.Count == 0)
throw new Exception("Error: no stream to print.");
PrintDocument printDoc = new PrintDocument();
PrintDialog printDlg = new PrintDialog();
printDlg.Document = printDoc;
DialogResult dr = printDlg.ShowDialog();
if (dr == DialogResult.OK)
if (!printDoc.PrinterSettings.IsValid)
throw new Exception("Error: cannot find the default printer.");
else
printDoc.PrintPage += new PrintPageEventHandler(PrintPage);
m_currentPageIndex = 0;
printDoc.Print();
Dispose();
public void Dispose()
if (m_streams != null)
foreach (Stream stream in m_streams)
stream.Close();
m_streams = null;
private Stream CreateStream(string name, string fileNameExtension, Encoding encoding, string mimeType, bool willSeek)
Stream stream = new FileStream(name + "." + fileNameExtension,
FileMode.Create);
m_streams.Add(stream);
return stream;
private void PrintPage(object sender, PrintPageEventArgs ev)
Metafile pageImage = new
Metafile(m_streams[m_currentPageIndex]);
// Adjust rectangular area with printer margins.
Rectangle adjustedRect = new Rectangle(
ev.PageBounds.Left - (int)ev.PageSettings.HardMarginX,
ev.PageBounds.Top - (int)ev.PageSettings.HardMarginY,
ev.PageBounds.Width,
ev.PageBounds.Height);
// Draw a white background for the report
ev.Graphics.FillRectangle(Brushes.White, adjustedRect);
// Draw the report content
ev.Graphics.DrawImage(pageImage, adjustedRect);
// Prepare for the next page. Make sure we haven't hit the end.
m_currentPageIndex++;
ev.HasMorePages = (m_currentPageIndex < m_streams.Count);
Thank you very much for this wonderful tutorial. :)

SAP Query (SQ01) who and when to use the report

HI Experts!!!
Is there somewhere recorded information: who and when to use the report from SAP Query (SQ01)?
Thanks

Hi
This topic doesn´t belong to the Service Marketplace Area.
regards Martin

What are the logical database source (SQVI) should i use for quick viewer

Dear expert,
Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
Please help.
Many Thanks.
Regards,
Karen

Hi,
Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
Between,do you have any reference/link/document on the how to use the SQV1?
Also, what the difference between SQV1 and SQ01 ?
And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer to generate the query?
Please help.
Many thanks.
KH

Using XL reporter view in query generator

Similar Messages

Maybe you are looking for