Usps international shipping won't allow printing of label

Hello. When using USPS.com or Paypal.com for domestic shipping, everything works well. When using USPS or paypal ''''''''international'''''''' shipping, everyting works well until the final screen or step which is "print label". The label does not appear. My account is charged, but the label does not print. I'm using Mac OS 10.4.11, firefox 3.6.15

Apple folks would be monitoring this and perhaps tell me a better way or pass the info on.
NOPE! Apple does not monitor their message boards because it's user to user. If Feedback is working out, then call Apple Customer Relations - 1-800-767-2275. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post. GOOD LUCK!

Similar Messages

Airport won't allow printing

Suddenly my Airport won't let me print with either computer (one on OSX8, one on OSX9). can print with USB conected, but not via Airport. All worked fine, but something changed.
Other functions are working.
Printer is HP 1606 dn.
Where to begin?

I would begin by taking a look at the following Apple Support article for troubleshooting a USB printer connected to an AirPort base station.

CUPS won't allow printing in a Windows network

I just spent five days trying to get printing working in my OSX 10.9.2 (iMac). Here's the thing: the printing network is a Windows smb network. Everything works fine on my MacBook OSX 10.9.2. I can manually install the smb://xxxx/yy printer and it works just fine there. So what's wrong with my iMac? I have no idea, but this is what happened. First I tried installing through Printers & Scanners / Advanced. And it worked fine on OSX 10.9. I used guest/guest credentials for the Windows network printer when asked.
But after upgrading to 10.9.2 it stopped working. The queue window says Ready to print and refresh or Resume does nothing. In the error log it says "ERROR: error in CUPS Filter - : Broken pipe". And also there are possibly problems with authentication.
Then I tried installing the printer through the CUPS web interface. Had weird problems with it, as it's very hard to control users and authentication. At one point I thought I had cracked it, I was able to print with my Windows network credentials. But the next print did not work anymore. I had to uninstall the printer and install again to get just one print. After trying to set users right with different sudo commands I am now at point where I can't even get one print through.
What can I try? I have done Reset many times from Printers & Scanners, no difference. What does the broken pipe mean? And how to set the printing CUPS user to what I want (it needs to be different than my OSX user or "root")?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

IPhoto Calendar - International Shipping with US Billing Address?

I would like to send a calendar I'm making in iPhoto as gifts to friends around the world. Can I make the purchases using my US based credit card? For example I go to preferences -> advanced and change my store to Singapore (to ship to a friend in Singapore). Would I be able to make the purchase with a credit card with a US billing address?
It is my understanding that if I leave the store as United States in preferences, the inputs would not allow for international addresses to be put in and that is why I'm changing the store's country.

With some many posts related to "shipping internationally from iPhoto" you would think Apple would chime in by now. It really is a major failure on Apple's part that international shipping is not allowed. Instead you force users to go to SNAPFISH or other 3rd party services - thus taking our money elsewhere.
Its been a problem for YEARS... please fix this Apple. You can't expect users to open a credit card account in a different country - also its almost impossible to do for most people.
E

HT1051 iPhoto book - international shipping issue...

Hi! I have just moved to Singapore from London & have created an iPhoto book that I would like to ship to my Singapore address. However, when I click to purchase the book, it refuses to accept my Singapore postcode.. Can anyone help me with this? Thank you!

With some many posts related to "shipping internationally from iPhoto" you would think Apple would chime in by now. It really is a major failure on Apple's part that international shipping is not allowed. Instead you force users to go to SNAPFISH or other 3rd party services - thus taking our money elsewhere.
Its been a problem for YEARS... please fix this Apple. You can't expect users to open a credit card account in a different country - also its almost impossible to do for most people.
E

Firefox does not work with the USPS self ship web site. Will not allow printing of postage labels.

Some months ago, user "junkbondman" asked this question somewhat poorly, and partly as a result got a non-responsive boilerplate answer by someone who did not read the question's key (if cryptic) point:
> Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
That's too bad, because 16 other users identified "HAVE SAME PROBLEM" - as had, no doubt, a large majority of the 677 viewers of the question. However, maybe to get a better answer we need to start with a better definition of the problem.
The way that the USPS site <cns.usps.com> works to print a label is that addresses (return and forward) are defined, the package weight and value are specified, and then a shipping mode is selected before paying and printing the label. The shipping mode is selected in a section titled "Select a service type", via an embedded table using a vertical scroll-bar that Firefox cannot handle. [Firefox is not alone in that. For example, Safari under iOS cannot scroll the embedded table, but USPS provides a mobile app which mitigates that problem by presenting the table differently.]
Now, it should be stipulated that the table is the worst element in a bad page that does not begin to pass W3 validation [71 errors, 19 warnings - looks like government work]. However, other browsers (like Google Chrome) handle that table with apparent ease. The question is whether Firefox should be able to do so - and, if so, how? As of Fx 33.0, this still does not work.
NOTES:
(1) Unfortunately, to examine this problem requires setting up a USPS account in order to see the shipping page. Setting up the account is easy, but it is a small extra burden to examining the problem.
(2) The problem has been reported to USPS, but has elicited no sign of intelligent life.

''I get the "pointer" mouse cursor when mousing over the blue bar, and I can click on it and scroll the contents as with any other scroll bar, but the bar doesn't move up and down in sync with the content being scrolled: it just stays put. If I do not slide straight down, the blue bar may twitch a pixel left or right.''
Great description! - sorry if you implied that earlier and I misunderstood, but I think that description adds crucial details:
* must hover over the ''blue'' part of the bar (representing the visible part of the table) and
* get the "selector" cursor (the pointing finger), then
* hold that click while scrolling (inside or outside of the table doesn't matter, as long as that click is held) to the needed table row, then
* release the click, and the table stays in place to allow a selection.
Most pages with an embedded scrollable input form (like the box I'm typing in on this page) do not change to the selector cursor when hovering over ''any'' part of the scroll bar, either ''blue'' (representing the visible part of the input form) or ''white'' (the invisible part of the input form). And it is common to click in the ''white'' part of the bar as a way of saying "show what is not visible". You can't do that with these USPS input forms, which behave differently.
Now, even with this method, that remains a very unintuitive (because the scroll bar does not reflect the position, and because the actual ''selections'' never get the "selector" cursor) and awkward way to work, so there is no visual feedback on either part of the operation.
And, I must try to understand why some browsers treat this differently. For example with Chrome (like Firefox), the cursor changes to "selector" in the blue part of the scroll bar, but not in the white part, but with Chrome (unlike Firefox):
- a ''click'' in the white ("invisible") part of the scroll bar or
- a ''drag'' on the blue ("visible") part of the scroll bar
causes movement in the required direction - altogether more intuitive behavior.
Bottom line: At least there is a way to make this work with Firefox, but it is awkward, to say the least. It will require a lot more thought to think about:
* how and why some browsers handle these non-standard input forms with such intuitive behavior (that is, behavior that is familiar in more standard input forms),
* whether the fact that Firefox is less accommodating in that regard is a reportable bug, or whether Firefox should not have to worry about sites (like usps.com) that can't be bothered to comply with standards.
What do you think about those questions?

Problems printing international shipping labels in PayPal since updating to iOS 7

Problems printing international shipping labels in PayPal since updating to iOS 7. When I press the reprint label button, another tab opens up, which it did in the previous version but instead of the shipping label bring displayed I get a message saying cannot open page as the network connection has been lost. By this point I have already been charged for the shipping. Any ideas why???

I have the same problem, not just with international labels, but with any shipping labels in Paypal. iPhone 5 and iPad w/ Retina Display using iOS 7.0.2.

Borderless printing in Lightroom 5--Mac Yosemite, Canon i9900. Selected 8.5x11 borderless media, but LR insists on printing with borders. Tried adjusting cell size and margins, but LR won't allow setting to zero.

LR won't allow me to adjust the margins below minimum values of about 0.25 in. Borderless printing and 8.5x11 borderless media are selected.
LR also won't allow me to increase the cell size. It seems to have a maximum of 8x10.68.
Aspect ratio of the image I'm trying to print is 8.5x11 so it should be a perfect fit.
When I print the same image in Photoshop, it prints borderless just fine on the same printer.
Mac, Yosemite, Canon i9900.

I have had some more trials to print without boarders. This time, it was inside of iPhoto. I had made a greeting card and wanted to print to a custom size. but without the ability to select the size as a boarder less size, I was unable to print directly. So instead, I had to save as a pdf > save pdf to iPhoto and then print the image as a photo (instead of a card).

I just used "Erase" via "Find my phone" to erase and rest my MBP. It's caused my MBP to be locked. I entered correct 4 digit PIN and it seemed to accept it, but it won't allow use of the internal drive. Yosemite loaded. Anyone else had same problem?

I just used "Erase" via "Find my phone" to erase and reset my MBP. It's caused my MBP to be locked. I entered correct 4 digit PIN and it seemed to accept it, but it won't allow use of the internal drive. Yosemite loaded. Anyone else had same problem?

Greetings Fraser Alexander,
Erasing your Mac shouldn't harm your internal hard drive but erasing does clear Yosemite and everything else off of it. Are you not able to restore it with your Time Machine backup?
iCloud: Erase your device
If you erase then find your Mac, you can restore the information on the Mac using a Time Machine backup. For more information, see the Apple Support article Recover your entire system. If you set an EFI firmware password on your Mac before it was lost, then erase it and later find it, you may need to take your Mac to an authorized repair center to unlock it before you can use it again.
OS X Yosemite: Recover your entire system
Take care,
Nubz

I have a HP Officejet Pro L7780. Recently it won't allow me to print from websites,

I have a HP Officejet Pro L7780. Recently it won't allow me to print from websites, The only way I can print is to 'copy' it to a word document then print. ANy suggestions as this has only recently been an issue.

Trying running the Print Diagnostic Utility and see if it finds any errors http://http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&lc=en&dlc=en... . If that does not fix the issue try uninstalling the software and reinstalling it.
Although I am an HP employee, I am speaking for myself and not for HP.

When I change shipping country it won't allow me to use my credit card with an address in a different country. how do I resolve this?

When I change shipping country (through advanced preferences) it won't allow me to enter my original country where my credit card is registered in the billing address field. Is there a way around this?

No. The shipping address must be in the same country as the billing address of the credit card used.
Happy Holidays

I bought a second hand MacBook Air and it won't allow me to install updates as up pops the previous owners log in details. How do I go about amending this?

I bought a second hand MacBook Air and it won't allow me to install updates as up pops the previous owners log in details. How do I go about amending this?

The seller was remiss in not properly preparing the Mac for sale. That task has now fallen to you. You will encounter continual problems until you perform the following. Ignore references to DVD since the MacBook Air has none.
If you are unable to do that contact the seller and request instructions, or arrange for its return and a refund of your costs.
Refer to What to do before selling or giving away your Mac
If you enabled FileVault, disable it in System Preferences > Security & Privacy.
"Deauthorize" your iTunes account. Same for Audible if you have one.
System Preferences > iCloud > de-select "Back to My Mac" and "Find my Mac".
Sign out of iCloud. Select "Delete from Mac" when it appears.
Next: Remove all your personal information by completely erasing the Mac's internal storage.
If your Mac shipped with a grey System Install DVD, start your Mac with that disc inserted in the optical drive while holding the c key to boot from it instead of its internal volume, which should be erased before selling it.
If your Mac did not ship with discs, boot OS X Internet Recovery:
using three fingers press and hold the following keys: ⌘(command), option, and R.
With a fourth finger press the power button to turn on the Mac.
Keep the other three fingers where they are until you see the "spinning globe" icon.
This method forces the Mac to download its originally installed OS from Apple's servers, which will not require an Apple ID to install.
Remove any Open Firmware password if you created one: select Firmware Password Utility from the Utilities menu and remove it.
Select Disk Utility from the Utilities menu.
Remove any partitions you may have created.
Select the Mac's hard disk icon, then select the "Erase" tab.
Select the "Security Options" button and erase the disk.
The more "securely" you erase the disk, the longer it will take.
The fastest method is sufficient since all but the most expensive techniques and equipment will be able to recover securely erased data.
When it finishes, quit Disk Utility.
Select Install Mac OS X from the Utilities menu.
An Apple ID will not be required. If a prompt for an Apple ID appears, return to Step 5.
Do not create any user accounts.
When it finishes, shut down the computer.
If you want to install the bundled apps that were included with your Mac, restart by using your Applications DVD if one was included, and install the bundled apps. Apps bundled with newer Macs that shipped without discs cannot be transferred. Its new owner must purchase them from the Mac App Store using his or her own Apple ID.
If the Mac is being sold to someone outside the family consider the following additional information:
System Install DVDs that came with your Mac should remain with it forever, and must be included with the sale.
Consider including your AppleCare certificate if you bought it, printed documentation, even the box if you still have it. AppleCare stays with the equipment and is transferable.
Execute a bill of sale showing the Mac's serial number.
Once no longer in your possession, remove the Mac from your devices in My Support Profile.

I live in the UK and want to purchase gift cards from iTunes for people in the US but It won't allow me to use my UK address and credit card. Can I or cant I?

I live in the UK and want to purchase gift cards from iTunes for people in the US but It won't allow me to use my UK address and credit card. Can I or cant I?

You would have to work with a retailer selling iTunes cards who would accept a non-US credit card. Best Buy is a possibility; they carry iTunes prepaid cards and will accept orders from other countries:
http://www.bestbuy.com/site/Help-Topics/International-Orders/pcmcat204400050019. c?id=pcmcat204400050019
You'll have to have the order shipped directly to the person in the US (or at least someone with a US address, who could then repackage and resend the cards for you).
Regards.

K7n2 delta, won't allow me to connect to the internet via pci modem

motherboard: K7n2 delta, nforce2 ultra
won't allow me to connect to the internet via pci modem
i have got 2 computers with same mobo, can connnect through external 56k
but the 2 internal 56ks (one in each computer), will not connect.
just dials then beeps, or no dialing tone.
the 2 internal ones are differnet makes, but connect through PCI
there must be something wrong with Mobo settings or pci stuff
all internet and modem settings are correct, etc etc etc
can u help
or does anyone have a pci 56k running on that mobo?

Quote
Originally posted by Solway
i made my creative one work and dial, using pulse dialing, but it takes ages
but my other one has no dialing tone, its werid.
If your not hearing dial tone you might have your phone plugged into the wrong port. Most modems have 2 outlets, one is labeled line ( that is the one you should have plugged into the jack (RJ11C). If that's correct, query the modem and see if it tests OK, you may have a defective modem.

I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File - Library - Organize library. I am suppose to check mark both boxes there, It won't allow me to check mark the second box, why? How to fix this.

I am trying to backup my Itunes onto my external hard drive. I am at the step where I on Itunes, click on File ->Library ->Organize library. I am suppose to check mark both boxes there, the first being "Consolidate Files" & the second being "Reorganize files in the folder 'Itunes Media'. I am able to checkmark the first box but It won't allow me to check mark the second box, why? How can i fix this? Please help!

Well you must have made a mistake somewhere. The last instruction of step four reads:
When you've found your iTunes library folder, drag that folder to your external hard drive. This will begin the iTunes backup. The amount of time the backup will take depends on the size of your library. When the transfer is done, your backup is complete and your external hard drive can be disconnected.
Normally dragging content from to a new location on a different drive will result in a copy action which is what you were supposed to do. At a guess you somehow managed to move the iTunes folder. Then when you started iTunes it created a new blank library for you assuming it had just been installed rather that raising a warning.
Close iTunes. Rename the iTunes folder on the internal drive as iTunes (Empty) then copy the iTunes folder from the external back into the User's Music folder. Start iTunes. All should be well.
When you've made sure it all works please read my User Tip and use that method to backup in future. Since you already have a folder with the backup in place you can skip the "Make New" operation in the fourth step and simply choose the external folder.
tt2

Usps international shipping won't allow printing of label

Similar Messages

Maybe you are looking for