Ut60e
hello,
I need to write a driver for Uni-trend digital multimeter mod. UT60E, but I don' t know its serial communication protocol. Can somebody help me?
antonio
Hi,
unfortunately we do not provide a ready-to-go instrument driver in LabVIEW for the specific instrument you mentioned. You can always check on this page if there is anything that can help you in your work --> Instrument Drivers Downloads.
On the following web page you can find the instrument driver and User Manual for the device you are using. The right way to go for you might be to call the DLL provided with this device from within LabVIEW using the Call Library Function Node.
UT60E Resources Page
Regards,
AlessioD
National Instruments
Similar Messages
-
Can't install Forms and Report whith Redhart 7.2
I use oracle 8.7.1. When I try to install Forms and Report
I get this message UT60 is not available
WhyAbsoulte life saver! Just got my new 15" mac book pro and the first thing I wanted to do was download the trial of the new cs5.5 suite. Nope couldnt do that. Had the exact same problem with the adobe download assistant. Turned graphic switching off and worked striaght away! Crazy. Took my Mac into the apple store today aswel and they couldnt figure it out! So hope this helps anyone else who has this problem. Thanks hpwooten! I am not happy with my mac again :-)
-
Can't install Forms and Reports under linux 8.7.1
I try to install Forms and Reports i get this message
UT60 is not available or _TK60 is not available
Please help meI solved my problem... more by a system of trial-n-error than anything else. Here's how you go about it:
1. BACKUP ALL YOUR DATA. I would suggest using time machine thrice on three different locations. Better safe than sorry, and when it comes to backing up data, Overkill is Underrated.
2. Boot into Disk Utility mode.
3. Locate, select erase the primary HDD/SSD. WARNING: YOU WILL LOSE EVERYTHING ON YOUR COMPUTER THAT HAS NO BEEN BACKED UP.
4. Install OS X online.
5. Select your preferred backup location and tranfer all your data to the freshly installed system. This should restore your computer to an "as was" state.
6. Once the computer is done restoring our data, restart the system.
7. While restarting press the following key combination:
cmd+option+P+R (You have press the combo before the grey screen appears during the boot and let go as soon as you hear the boot up chime.
This will reset your computer's PRAM.
8. Boot into your system and re-install xquartz (latest version) from the source site.
I am not saying this process is fool proof. It worked for me, and it usually tends to work when you are facing problems due to a missing system file. -
UT803 Uni-Trend Bench Multimeter Driver
Hi!
I write this in the edge of desperation for I´m REALLY new to LabView
I´m trying to use the UT803 Uni-Trend bench multimeter for data acquisition in LabView through RS232
I started searching on how to do it, and came to this posts
in this post:
http://forums.ni.com/t5/Discussions-de-produit-de-NI/Passage-RS232-vers-USB/m-p/1548790
the user says he developed his own IV for the multimeter, I reply the post trying to reach him but he´s not online since like 2008 so I guess he won´t reply soon
So I searched for the driver and found this one
http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=5A2A9076B4C65AEBE04400144F1EF8...
which is for the UT804 Multimeter. I tried to use it but I don´t really know how. I just copied it to the <LabVIEW>\instr.lib like they show in here
http://www.ni.com/devzone/idnet/inetinst.htm
and now I can see the Functions -> Instrument I/O -> Instrument Drivers -> UT804 Multimeter. But when I´m to use it I´m totally lost
Having done that I searched for the driver of the UT803 from the Manufacturer CD like they say in here
http://forums.ni.com/t5/LabVIEW/ut60e/m-p/172930
but there´s no DLL file, so I searched it in their homepage to see it they provided it online
http://www.uni-trend.com/UT803.html
but still no DLL to use in the driver wizard.
Having done that I looked for how to control the RS232 "Manually" so I looked in these post on how to do it
http://forums.ni.com/t5/LabVIEW/ut60e/m-p/172930
http://forums.ni.com/t5/Discussions-de-produit-de-NI/Acquisition-de-trames-sur-port-serie/m-p/624378
(This one in Chinese is called) RS-232接電表一直出現錯誤
but still no clue
I did quite a research, but still I´m a starter so I guess without knowledge I can´t do much.
Can anyone help me? please I really need to get this multimeter to work
Thank you in advance
Julian
Physics Student
I´m using LabView Student Ed 8.0
Measurement and Automation Explorer ver 4.3.0f 0
Windows Vista (I know what you´re thinking...It was not my choice)
By mistake I posted this same message in: http://forums.ni.com/t5/Driver-Development-Kit-DDK/UT803-Uni-Trend-Bench-Multimeter-Driver/m-p/15495...HI!
I'll bring back to life this threat (after so long) so someone can help me understand how to control a device via serial without a driver, or how to program that driver.
I'll start by uploading some files
1- The ut804 driver found in the Developer Zone of NI
2- My attempt to use that driver to control the ut803 (Not working)
3- My attempt to use VISA control (In the Instrument I/O panel) (Also not working)
Now you must be thinking that an attempt using the Serial control in the Instrument I/O panel is missing, but the Test Panel in the Measurement & Automation explorer -> Serial & Parallel (COM4) brings back a timeout in any of the Input/Output commands (write, read query, etc).
Yet I have tested my serial port by shorting the 2nd and 3rd pin of serial port and tried this
http://www.youtube.com/watch?v=RM8a66g2eGo
And it works!
So I guess... Help! What am I doing wrong?
Why doesn't my Visa control attempt work?
Can anyone test it?
PS. About the RS232 settings, the UNI-T 803 Operating manual reads.
(Page 54)
C. Setting of RS232C Serial Ports
Default of RS232C serial port for communication is set as:
Baud Rate 19200
Start bit 1
Stop bit 1
Data bits 7
Parity Odd
Attachments:
ut804-LVDriver.zip 80 KB
UNI-T-803(4).vi 52 KB
UNI-T-803_VISA-Control.vi 12 KB
Maybe you are looking for
-
I am cofused. My iPad is disabled. I believe the password that it's asking for would be my Apple password correct? Well, I try to type it in what looks like a phone (numbers and letters) but, it doesn even allow mw to finish the password.
-
MOSS 2007 Custom Theme Images Invisible to Users
Hi, Our MOSS 2007 Site uses Custom Theme and the theme uses image for styling navigation background. The issue is the when a user logs in to site he is not able to view the navigation background image whereas when a user with full control logs in to
-
Wired port cannot establish TCP connections
I have come across an error that I have so far been unable to solve via google/searching forums. From time to time, the wired port loses the capability to establish TCP connections. I can ping fine, I can resolve names fine indicating that at least U
-
InfoPath 2013 in SharePoint 2013
Our SharePoint 2013 is run on IE8 - 64 bit. On a site landing page, I had InfoPath 2013 built. There is field of rich text. When I tried to add text in this field, it said that the browser does not support the InfoPath rich text edit control." Our S
-
LR to Flickr: Images return to unedited version upon export...hmmm
Hi, New to LR, so sorry if this is a silly question. I have "developed" some images and now want to put the nice looking ones up on Flikr. I know how to use the Flikr uploader stand alone, or via the export function. My problem is that when I drop th