Utility to check for Entities with No Data

Does such a utility exist? We would like to remove several hundred old entities from our production environment but would like some comfort that they have no data records and they have not been used as ICP's.
I realise we could use data grids or smartview but thats fairly time consuming.

Not that I know of.
If you have not done any journals then you could just extract data for each scenario/year see what is in the file. If you have used journals then I have found adhoc (Smartview) is the only way as you cannot easily extract from <Entity Curr Adj> or any of the other adjustment Value nodes.
You can check journal integrity by loading the new metadata (with removed entities) into a duplicate test environment. You must extract affected journals before you load the new metadata otherwise you will not be able to work with them again.
You must also consider whether these entities have been ICP. You must see which other entities have had balances with the entities you want to remove. If you do not do this the related data in the source entity will also be removed. You will ahve to put the amount with another ICP before removing your entity.
Futhermore you should consider any effect that might be caused if you have used allocations.

Similar Messages

How is the stock utilized by Sales for GI with Mvt 251-

how is the stock utilized by Sales for GI with Mvt 251- they use Availabilty check and pick material from stores/warehouse. when is GI with 251 mvt required.

hi
check MB5B
for mov type 251
regards
kunal

Windows Update failed to check for updates with error 0x800B0001

Hi all,
I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
Windows Update failed to check for updates with error 0x800B0001
Note: I cannot see the Win2K12 server in the WSUS console under computers node.

I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
http://tplive.azurewebsites.net/2013/12/windows-update-error/
You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
not recognize that the installation of the update was not successful.
The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
properly and completely patched.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

How to check for duplicates - with a twist?

As I'm importing music from my CD collection, is there a way to automatically check for duplicates - with an unusual twist?
I already imported about 70 CDs using AAC format.
I just bought a huge external drive specifically for storing my entire collection of CDs and LPs. Now that I have lots of space, I want to import everything in Apple Lossless format.
Is there an automatic (or at least painless) way to check for duplicates as I'm importing CDs, and to have the old AAC music files over written by the new Apple Lossless files?

Hi Clinto,
Do you see the column headers above in itunes? They say Title, Album, Artist, etc. I don't know if it's the same for MAC but in Windows, Right Click on the column headers and click "Kind". This will display the format each song is in. If your column headers already take up all of your screen, you're gonna have to uncheck one to make room for "kind".
Oh! and to overwrite existing files, make sure the ID3 tags are filled exactly to the old ones prior to ripping, though you don't need to fill all of them. I think you just fill the Artist, Album Artist, Album, and Title. A window will appear as you start to rip. It will ask if you want to overwrite the existing files, click "Yes". Again, don't know about Mac but it works this way in Windows.
Message was edited by: fullcream

I hv iPhone with ios 6.0.2 My iphone could not able to check for update-it's just showing "checking for updates" with loading sign How can I upgrade to ios 7? Help pls

I hv iPhone with ios 6.0.2
My iphone could not able to check for update…it’s just showing “checking for updates” with loading sign
How can I upgrade to ios 7?
Help pls

I agree- I apologize if I sounded skeptical and attacking. In no way did I mean it to sound that way.
I completely agree on the software-hardware combo issue- this is why apple killed off 1G and 2G devices- because newer software revisions would never ever run well if at all on such ancient devices. can you imagine running iOS 6 on an iPhone/iPod touch 1G? That would be terrible. Let alone iOS 3 runs terrible on them and now are generally rendered useless due to newer App Store requirements (most require 4.3+ now to allow apple to kill off the older devices). forcing newer software on older hardware (apple, dell, HP,... Anything electronic this definitely applies to) will almost always yield less-than-par results. The other part is apple forcing you to upgrade by means of intentially making things obsolete. all companies do that.
All of this factual info aside, the issue at hand with the 5 is not a software-hardware combo problem- those are most widely seen with the major revisions. then again, this isn't the first time apple has gotten caught up in battery drain snafus (even iOS 5 was plagued with this as well- and now there are some people desperate to roll back but can't). it basically waters it down to the point where keeping the stock software will always yield the best results even though newer versions provide better features- it all depends on whether or not the person deems the added features are worth a performance hit.
PS. I'm still at 100%- and I've been using it periodically throughout the day. your combo worked for you, but didn't for me. And may or may not work for others- As the tech world would say, mileage may vary.
PSS. What model/carrier do you have? Just wondering.

How can I enforce automatic spell checking for selected fields of data entered by form users?

I'd like to be able to enforce spell checking of selected fields in the forms that I've created using LiveCycle Designer 8.2 at run time, as opposed to design time. I understand the version LCD 8 has a nifty new spell checker for form designers. But I want to spell check the data entered by users using Acrobat Reader. And I want to enforce the spell checking automatically on selected fields only.
Presently it seems that users filling in my forms, must know how to manually right-click on each field and select "Spell Check" from the resulting dialog box in order to check for spelling errors in the data the user has entered in the form.
I would like to discover a way to enforce spell checking in selected fields, just as I am able to do in forms created using Acrobat Pro. In Acrobat Pro, I can set a property for each field to require spell checking. but that feature seems to be missing in Livecycle Designer.
I've check the Object model for XFA forms hoping that I might find a method I can call with a Javascript, to check spelling based on an event such as onBlur. But I haven't found a spell check method.
Am I missing something simple? Is there a way to set each field to be spell checked when a user is filling in the form using the free Acrobat Reader?
Our users are not sophisticated and requiring them to spell check each field separately just won't cut it...
Any help on this will be greatly appreciated.
Thanks!
-David Bartholomew

Hi David,
Two things...
At design time set the locale of the form to one that Acrobat spell checks. For example English (US) and English (UK) locales have spell checkers; however English (Ireland) does not. Check the Warnings tab to see if spell checking is supported for your locale.
If your form locale supports spell checking then you can go to the button script below.
If you form locale does NOT support spell checking then Stephanie has a great work around to force spell checking (http://forums.adobe.com/message/2233945#2233945).
Bring a regular button onto the form and in the click event have the following:
app.execMenuItem("Spelling:Check Spelling");
Which will open the spell checker for all fields. Thanks to Paul for extracting all of the accessible menu items (http://forums.adobe.com/message/1912914#1912914).
Good luck,
Niall

Check for libraries with a startup script

Is it possible to check for open libraries with a startup script? Currently, i'm trying like this:
try{
app.libraries.item("Marks.indl").name
catch(e){
app.open(File("/Support/InDesign/Lib/Marks.indl"))
If InDesign is already open, this code works correctly (that is, if the library is open, nothing happens, otherwise it opens the library). However, if I place this in the startup script folder, it will open a second (third, fourth, etc.) copy of the library, even if the library is already open.
I think this happens because the library files are opened later in the startup sequence then the startup scripts are run. Is there any way to work around this?
Thanks,
/dan

Is your script supposed to work in ID CS3, or later?
Anyway, InDesign CS4 seems to reopen the libraries before launching startup scripts, so the following code works for me:
// Startup Script
const libName = "Marks.indl",
libPath = "/Support/InDesign/Lib/";
var libFile = libPath + libName;
if( !app.libraries.itemByName(libName).isValid )
try {app.open(File(libFile))}
catch(_){alert("Unable to open the library:\r"+libFile);}
@+
Marc

Internal Order Budget Check for PO with reference to PR / RFQ

Hi All,
I have a scenario where the budget availability control is not working for PO created with reference to PR or RFQ. While creating the PO if i modify the PO value more than RFQ or PR value then system is looking for budget control.
If we create a direct PO system is checking for Budget control where the PO value is more than availability budget.
We have the budget control check with internal order for services and non stock material based on substitution rule created for cost element group and cost center group.
In tolerance limits budget availability control we have not activated for PR, itu2019s activated from PO.
Kindly let me know what is the reason for budget availability control is not active where the PO is created with reference to PR or RFQ.
Thanks & Regards,
Rama Mohan

493900 - FAQ: Release Strategy:
It is not possible to create a purchase order if the referenced purchase requisition is not released. But the system allows you to put the purchase order on hold and then release the purchase requisition.
On the other hand you can create a purchase order with reference to an unreleased request of quotation.

How add Authorization check for user with assigened role for t.code-MIR4

Hi All,
Regarding authorization how to check authorizations check for user whith assigned roles for the t.code MIR4 using ABAP.
In Detail:2) All users are allowed to go to MIR4(invoice number), But ONLY for users with role: MM_RELEASE_INVOICE can proceed to do the posting.
suggest me...
Thanks,
srii..

Hi Sri ,
first u need to find out in which user rules u are using this object , after that if u want to restrict users then remove create/change values from that object values .
make use of Tcode SUIM to find out all roles which are using this Object.
or
ask ur basis guy to remove authorizations to create/change....
regards
Prabhu

Using "Check for Purchases" with applications

Hey Guys,
I have an iPod Touch 16gb. I download an application to the iPod via the on-iPod app store. If I go back to my computer and hit check for purchases, it never downloads the newly purchased app.
I always have to sync my iPod and then it gets transferred over. My question is what would happen if my iPod was stolen or deleted and I lost the app files on my computer, how would I get them back?
I thought the whole point of "Check for Purchases" was so that it keeps a record of what you downloaded?

I thought the whole point of "Check for Purchases" was so that it keeps a record of what you downloaded?
It's to check for stuff you have purchased but not downloaded

Disk Utility - Format Time for 500GB (Zero Out Data)

Hello.
Is there one length of time for formatting a hard drive with one pass of Zero Out Data? For instance, does the length of time change depending if you format with zeros using USB2, FW400, FW800, or eSATA?
*My Format Setup*
LaCie Rugged 500GB All-Terrain (USB2 & FW400/800)
FW800 Cable
GUID Partition Table
Mac OS Extended (Journaled)
Zero Out Data (One Pass)
I'm formatting with a FW800 connection. Disk Utility has said it will take 1.5 hours for about 3.5 hours now. The blue bar has progressed even though the time remaining is incorrect. At this rate, it will take seven hours to format 500GB.
I'm going to be formatting multiple 500GB and 1TB drives, and I'm wondering if the time I'm experiencing is normal. Therefore, it should take a day to format 1TB with one pass of zeros. Is this correct?
Thank you for your help! =)
Message was edited by: Revearti

It takes a long time to zero out data on a 500GB drive. The larger the drive, the longer it takes. I don't think the connection makes a difference, since each of your listed options are high speed. Never tried it on an external with USB 1.1, so can't give you any real time experience there. But it will take well over an hour to write zeros on every block of a 500GB drive.

Problem with embargo check for orders with textposition

Hi all!
Our orders get embargo checked by GTS. Some of the orders do have textpositions (Typ AGTX), that causes errors, because they don't have a material number or plant.
Where can I customize, that these textpositions should not be embargo checked?
Thank you for your help.
kind regards
Sabine

Hello Sabine,
you would have to modify BADis for MM0A and SD0A document transfers saying when transferring document with items having AGTX filled not to be relevant for GTS.
Materials Management u2192 Purchasing u2192 Basic Functions u2192 Foreign
Trade/Customs u2192 SAP GRC Global Trade Services- Plug-In u2192
Business Add-Ins for SAP GRC Global Trade Services u2192 Change and
Expand Document Data for Transfer
Sales and Distribution u2192 Foreign Trade/Customs u2192 SAP GRC Global
Trade Services- Plug-In u2192 Business Add-Ins for SAP GRC Global Trade
Services u2192 Change and Expand Document Data for Transfer
Hope it helps,
Best regards,
Gabriel.

How to check for null int/null Date

Heres the situation, there is an interface accepting an int value and a time/date that are not required(and are not set to anything automatically, i have no control over that part unfortunately), but I need to set up some sort of null/has value type of check to execute the setter when it does have a value, and ignore it when it doesnt. I am currently getting null pointers. here is my current set up:
//throws null pointer as set up below, I am assuming I might want to eliminate the "getDate" off of the end and that might clear it up.
if(data.getDate().getTime() != null)
          tempData.setDate(data.getDate().getTime());
//Not sure on this one yet, the value doesn't get set to anything so I am assuming it automatically gets assigned something like -1.
if(data.getId() >= 0){
          tempData.setId(data.getId());
          }

tsdobbi wrote:
I know data isnt null because it goes through a bunch of other tempData.set(data.get) items prior to hitting a snag on the above date I mentioned, when there is no value input for the date. and that particular null check I do there, does not work because it throws a null pointer in the if statement itself.
i.e. it traces the null pointer to
(if data.getDate().getTime != null) //this is the line the null pointer traces to.{color:#3D2B1F}if data is not null, then it must be the case that data.getDate() is null. Now that's what I call logic. W00t!{color}

Reference for working with a data collection retreived from a Web Service

Does anyone have a good resource / example of working with multi row data collections returned from a web service call?
In addition to the basic return of x data rows, I will also be getting parent child collections. For example,
for each Customer row, 0 or more Customer Invoices
I have found many guides the relate to single values being retrieved by the web service, but I have not found any that refer to data collections.
Best regards,
Thomas

That can all certainly be done with a 13" MBP.
You'd want to get a USB hub, preferably USB 3.0 to plug in your optical drive, keyboard and mouse.
For your external monitor you can use a Mini DisplayPort adapter to DVI or HDMI (or if it's a retina MBP use the HDMI out).
For your ethernet, it will plug right into the non-retina. If you get the retina, you'd need a Thunderbolt to Ethernet adapter (faster) or a USB to ethernet adapter (slower).

Defining variant for report for job with dynamic date Gui 6.40 patch 21

The system does not take over my choice for the dynamic date.
I choose in the variant-attirubute-screen for a certain parameter: "type selection variable": D and then in the column "name of the variable" > I choose via F4: current date +/- days. OK and then I fill in 1 or 1- or whatever. The system however does only react with the message "Upper date of the interval is > than upper date". It does not matteer what I choose.
In the initialization I do not have any initialization of that parameter.
I connot save the variant.

Go through this link...
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
In this page
ABAP Workbench tools -->
VARIANTS -->
VARIABLE VALUES IN VARIANTS.
Hope this helps u a lot...
reward if it helps u...
sai ramesh.

Utility to check for Entities with No Data

Similar Messages

Maybe you are looking for