/uwc page does not allow log in after installation of sun jes 4
I am sure I have seen this before but am not sure how to remedy this - basically trying to log in on the /uwc/auth page does not give an error with any user but just wipes the username and password and returns the log in page again - anyone have any idea?
I did training a while back and am sure the instructor said that there may have been a typo in the instructions - possibly here - http://wireless.map.beta.com:80/uwc/base/UWCMain?op=logout in the configuring the messaging server for sso but am not sure.
Sory Shane, didn't mean to be rude - just got taken up with other sunjes instals! basically we have a comms5 and 6 installation but I need to also install a sunjes 4 install - I am able to logon into messenger with username and password with regard to SSo I have done the following:
Configuring Single Sign-on (SSO) for Communications
Products
To set up SSO for Communications Express and for Access Manager/Portal Server, you edit the
uwcauth.properties file in the /var/opt/SUNWuwc/WEB-INF/config/ directory. You also need to
run the configutil utility for Messaging Server properties, and edit the ics.conf file for Calendar
Server.
➤ To Configure Communications Express for SSO
1. Verify the following settings in the
/var/opt/SUNWuwc/WEB-INF/config/uwcauth.properties file:
IS Administrator Password -- adminpass
Messenger Express Port [80] 8080
Calendar Server Hostname [wireless.map.beta.com] accept default
Calendar Server Port [9004] 3080
Calendar Admin user ID [calmaster] accept default
Calendar Administrator User
Password
-- adminpass
URL of PAB Directory Server [ldap://wireless.map.beta.com:389] accept default
Bind As [cn=Directory Manager] accept default
Password -- adminpass
Table 15 Values for config-uwc Script (Continued)
Option [Default Value] Enter:
Configuring Components
Part Number 819-4879-15 Page 33 of 62
2. Restart Web Server if you change any of the above settings.
➤ To Configure Messaging Server for SSO
1. To enable Communications Express users to access Messenger Express using the Access
Manager session, run the following configutil commands:
2. Stop then start Messaging Server:
cd /opt/SUNWmsgsr/sbin
./stop-msg
./start-msg
uwcauth.identity.enabled=true
uwcauth.identity.login.url=http://wireless.map.beta.com:80/amserver/UI/Login
uwcauth.identity.binddn=uid=amadmin,ou=people,o=isp
uwcauth.identity.cookiename=iPlanetDirectoryPro
uwcauth.identity.bindcred=adminpass
uwcauth.http.port=80
uwcauth.https.port=443
cd /opt/SUNWmsgsr/sbin
./configutil -o local.webmail.sso.amnamingurl -v \
http://wireless.map.beta.com:80/amserver/namingservice
./configutil -o local.webmail.sso.uwcenabled -v 1
./configutil -o local.webmail.sso.uwclogouturl -v \
http://wireless.map.beta.com:80/uwc/base/UWCMain?op=logout
./configutil -o local.webmail.sso.uwcport -v 80
./configutil -o local.webmail.sso.uwccontexturi -v "uwc"
./configutil -o local.webmail.sso.amcookiename -v iPlanetDirectoryPro
./configutil -o local.webmail.sso.uwchome -v http://wireless.map.beta.com/uwc
./configutil -o service.http.allowadminproxy -v yes
./configutil -o service.http.ipsecurity -v no
Similar Messages
-
In the old pages you could simply copy the thumbnail and past a certain page into a different document.
The new pages does not allow you to do this.That and 95 other things it does not let you do.
Pages '09 should still be in your Applications/iWork folder, use that instead.
Peter -
The latest version of Mavericks does not allow a Pages document to become a 'stationery pad'! Is there a way to do this this other than through the 'Get Info' window? As Pages templates cannot be ordered in folders, my many templates are effectively unusable now and I need to find another way to order and access them.
Are you aware of that you can still use Pages 09 on Mavericks? You don't have to go thru the grieves of using the crippled Pages 5. Pages 09 should bi in Applications/iWork 09 folder.
-
Auto-hostep app with custom master page does not allow custom workflows
This has been troubling us all day. We have a sharepoint 2013 auto-hosted app. We wanted to simply change the site logo of the master page but it was easier said than done. Finally we had to create our own custom master page with our own site logo to overcome
this issue.
Now we are trying to add a custom workflow in our app. But the instalment of the app always fail with this message:
3> CorrelationId: cec727fc-bbf9-4499-ae36-6a7d05f3ae8c
3> ErrorDetail: There was an error during the operation.
3> ErrorType: Configuration
3> ErrorTypeName: Configuration
3> ExceptionMessage: Operation is not valid due to the current state of the object.
3> Source: Common
3> SourceName: Common App Deployment
After many hours of searching I came across this
post that sums up the problem to this:
Do not use the WebTemplate element in the app manifest to designate any of the built-in SharePoint site definition configurations as the app web's site type. We do not support using any of the built-in site definition configurations, other than APP#0, for app webs.
Thus, if you would like to include your workflow to SharePoint-hosted app, you have to use APP#0 template.
I am fairly new to the sharepoint 2013 app development and having so many problems just because we wanted to have a different site logo is making us focus out of the important stuff of our app. Isn't there a simple way for us to change the app's site logo
and add a custom workflow? Has anyone come up with a solution?Have you configured SharePoint Workflow Manager in the farm? Not sure if you are familiar with but in SharePoint 2013, there's a new component called Workflow Manager that needs to be configured to use SharePoint 2013 workflow.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com
I am using SharePoint Online. I have enabled the following site feature:
Workflows can use app permissions
Allow workflows to read from and to write to all items in this site.
just in case but it makes no difference. When I stop using my custom masterpage the app can install just fine and the workflow is working. When the custom masterpage is enabled the app won't install with the workflow. I am required to remove the workflow
to install the app. -
Andriod App does not allow log-in via Facebook.
I created my Skype account by linking it to my Facebook account. Unfortunately, the app doesn't allow me to log in via Skype. I use the same name under my account tab etc, yet it doesn't accept it. I'm not sure what else to do.
According to what shoes under my skype name my name is "facebook:XXXXXXX"
However, when I try to log in, it doesn't accept that same user name even though it allows me to sign in on the desk top. I've copied and pasted it and it still doesn't work.
I don't know what else to do here.
Can anyone help?Hi and welcome to the Skype Community,
Unfortunately logging in to Skype for Android is not supported. You need create a new Skype account to be a able to us it on Android.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓ -
Since Mavericks I am experiencing problems most probably related to iCloud:
the iCloud preference pane takes minutes to open; mail tasks hang on iCloud mail account ; Pages hangs before displaying list of icloud files.
I have managed to stop the problems by disabling the iCloud keychain - so it may well be related to that.
Any similar experiences or even solutions ?1.Use free AdwareMedic to remove the adware
http://www.adwaremedic.com/index.php
Download, install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic.
or
Remove the adware manually by following the “HowTo” from Apple.
http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
Turn those off and relaunch Safari to test .
Turn those on one by one and test.
3. Safari > Preferences > Search > Search Engine :
Select your preferred search engine. -
screen flashes, asks for password but cannot enter password as it keeps flikkering... this happened after installing a trial version from the programm 'logonkey'
screen now returns to black and thus stops the startupLogon Key Support
-
Pixel Bender does not show in filters after installation but shows in extension mgr as plugin
I installed pixel bender (64bit) into my CS5 extended group through the extension manager as administrator as per directions for win 7. All went well and I restarted both PS5 and the computer. I do not have any pixel bender option under filters or anywhere else I can find. Did I do something wrong? I will uninstall it and try again, but right now, it's not looking good.
Ok... here's the deal. I installed the CS5 Master Collection on my computer. It installed a 32 and a 64 bit version of PS5 on my Win 7 64bit system. I thought that may have been because I downloaded a trial version (possibly 32 bit?) from the web before I got my full version in the mail. I uninstalled it and did a clean install with the disc a second time thinking that the earlier trial version had created some kind of protocol. When I reinstalled the PS5 64 bit from the disc it AGAIN installed both versions but the only one that will open is the 32 bit. So, I downloaded the 32 bit version of Pixel Bender and reinstalled (as administrator) the plug in (or extension) from the Extension Manager. It is there now although I have not tried it. At least it shows. I still don't know why I am working in the 32 bit version??? Anyone know?
-
How to block a payment in F110, when the system does not allow us to block
Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SLDear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi -
Browser does not allow page refresh after Commit!
Hello everyone, I am using JDeveloper 11.1.2.3.0
I am having a big problem here. I create a simple page and insert a form, a createInsert button and a commit button for example. I run this page and everything is fine. I create a new record, fill the form fields and then commit. In this moment if I press F5 to reload the page, the browser asks me for confirmation "To display this page, Firefox must send information that will repeat any action (such as a search or order confirmation) that was performed earlier." I don't understand why it has to repeat any action, I checked for dirty transactions after the commit operation and transactions are clean. If I move from this page to another and back to first it works fine, F5 refreshes without problem.
If I have a table with multiple rows and I update first row for example, and then click the third row and then perform a refresh (Confirm on above message), the third row will obtain the obtain all the information of the first row...
Does anyone know how to deal with this problem?Ok I found the real problem and solution to this. As I said reopening the page does not bring any problem, but only hitting F5 does. My 'submit' and 'commit' buttons had 'partialSubmit=false' which should perform a total page submit in this case. Apparently this is not "detected" by the browser when pressing F5 although submission is performed. Changing 'partialSubmit=true' to the buttons did the trick. Tung
-
When I am typing in a browser window, my browser page shifts slightly, highlights in blue, and does not allow me to continue typing...i have to click in the browser to allow typing to continue...is there a function running that I don't know about?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.
I also have problems with Facebook on my iPad 2. I don't do a lot with Facebook and generally only post on my feed page. Sometimes hitting return on the keyboard enters the comment, sometimes not. Sometimes the comment will show on my iPad but if I revisit that page I find that the comment has disappeared. So I'd say that Facebook and my iPad are not totally compatible with each other.
I looked into Friendly and was about to purchase this free ap. But before I did I went to the Friendly web page for more info. There I found a page with users comments. One after another users complained about bugs with Friendly. The developers claimed a fix was coming but the user comments complained about the lack of response and support. One of the fixes suggested by the developers was to log out of Friendly then log back in. One user complained that doing this three times in ten minutes was not very helpful. Because of this I decided to avoid Friendly.
I did find a Facebook developed ap but it was for the iPhone. I presume that iPhone aps will work on the iPad but I'll wait until Facebook releases an iPad compatible ap. If there is an ap developed by Facebook for the iPad that I missed please let me know. -
Hi
Here is the situation:
I have a Farm with 3 servers W2012R2 in a Domain
Server1 Server 2
Server3
RDSession Host RDSession Host
RDSession Host
Connection Broker Connection Broker (Passive)
RD Web Access
2 DNS Alias : - poc.mydomain.local (Use for the RD Web Access and points to Server1
-poccb.mydomain.local (Use for the Connection Broker and points to Server1)
I have setup the Connection broker in HA with Server2 as Passive Server : DNS Round Robin poccb.mydomain.local (Server1)
The certificate Manager has generated 2 CA certificates :
- 1 for the RD Web Acc (poc.mydomain.local
-1 for Connection Broker SSO and for publishing
I have created 1 Group Policy for these 3 servers and 1 GP for my client Windows 7 SP1.
Server GPO :
Computer/Administrative Templates/Windows Components/Remote Desktop Services/Remote Desktop Session Host/Security
Always prompt for password upon connection=Disabled
Require use of specific security layer for remote (RDP) connections : SSL (TLS 1.0)
Set client connection encryption level : High Level
Client GPO
Computer/Administrative Templates/System/Credentials Delegation = Allow delegating default credentials (Concatenate OS defaults with input above)
TERMSRV/POCCB.mydomain.local
I use no Gateway and in my collection,I have activated SSL (Like in my Server GPO)
I have now problem with SSO.
Connection with remote desktop client with server name = poccb.mydomain.local
Your system administrator does not allow you the use of default credentials to log on to the remote computer poccb.mydomain.local because its identity is not fully verified
If in my client GPO I add the physical name of the 3 servers, it works :
TERMSRV/Server1
TERMSRV/Server2
TERMSRV/Server3
Open RDP Files with server name = poccb.mydomain.local
if my connection broker connects me on Server1 , no problem
But If I arrive on Server2 & Server 3=
Your system administrator does not allow the use of default credentials to log on to Work Resources
I have searched on internet. No result for " to log on to Work Resources"
Any idea ? Thanks for your helpHi,
Thank you for posting in Windows Server Forum.
Firstly check that, your user is using domain\username to enter the credential in the dialog box.
Now for a try, you can edit .rdp file with notepad and just place “enablecredsspsupport:i:0” line in it, save it an launch to check whether you are facing same issue.
As you are using windows 7 then upgrade to RDP 8.1. Also as you have already enter the FQDN name of server under “Allow delegating default credentials”. For a try please enable and configure for all the remaining settings as follow and check the result.
Start / Run / gpedit.msc / Computer Configuration / Administrative Templates / System / Credentials Delegation, and make sure you have the following four options enabled and configured:
Allow Delegating Default Credentials with NTLM-only Server Authentication
Allow Delegating Default Credentials
Allow Delegating Saved Credentials
Allow Delegating Saved Credentials with NTLM-only Server Authentication
Finally, open a command prompt and use “gpupdate /force” command to apply the policy directly.
More information:
Remote desktop credentials did not work
Hope it helps!
Thanks.
Dharmesh Solanki -
I can't rate or write a review for app on the app store. It allows me to write out the review but does not diplay my review after sending it. Can anyone point me in the right direction to get answer as apply refuse to reply or solve my problem. Ps thanks apple for ur ignorance
I have the same problem with another TeamLava app, Fashion Story.
-
it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?
Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything. It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one.
Maybe you are looking for
-
Can't recover 3GS after IOS5 upgrade attempt - phone no longer seen in iTunes
Tried upgrade on 3GS to IOS5, got msg that iTunes detected phone in recovery mode and I must restore. iTunes no longer sees the phone so restore doesn't work. Win XP sees the phone driver when I connect the phone, and driver says it is working proper
-
One solution for 'iTunes has stopped working' message
This worked in my case for iTunes 10.5 on a Dell Inspiron 1525 running 32-bit Vista. Symptoms started after I had to re-install it. Suddenly, whenever I tried to dl anything from the store, the dl would hit 100%, then I'd get the error message and DE
-
I am trying to upload a file to a mysql database (using a jsp tomcat 4.1 container) for each new member of my website (typically a cv which is a .rtf word file). I have used the example on the oreilly page and have managed to get the image of the fil
-
Hello, just learning Flex and states. I have created a new state. I thought a new state was basically a blank canvas to start constructing a new view in Flex. However when I start to add components to the stage in my new state, they are positioning t
-
Help... Why is my Photoshop CS3 not recognizing my NEF file from my new Nikon D7100, but will recognize NEF's from my old Nikon D90?