Auto-hostep app with custom master page does not allow custom workflows
This has been troubling us all day. We have a sharepoint 2013 auto-hosted app. We wanted to simply change the site logo of the master page but it was easier said than done. Finally we had to create our own custom master page with our own site logo to overcome
this issue.
Now we are trying to add a custom workflow in our app. But the instalment of the app always fail with this message:
3> CorrelationId: cec727fc-bbf9-4499-ae36-6a7d05f3ae8c
3> ErrorDetail: There was an error during the operation.
3> ErrorType: Configuration
3> ErrorTypeName: Configuration
3> ExceptionMessage: Operation is not valid due to the current state of the object.
3> Source: Common
3> SourceName: Common App Deployment
After many hours of searching I came across this
post that sums up the problem to this:
Do not use the WebTemplate element in the app manifest to designate any of the built-in SharePoint site definition configurations as the app web's site type. We do not support using any of the built-in site definition configurations, other than APP#0, for app webs.
Thus, if you would like to include your workflow to SharePoint-hosted app, you have to use APP#0 template.
I am fairly new to the sharepoint 2013 app development and having so many problems just because we wanted to have a different site logo is making us focus out of the important stuff of our app. Isn't there a simple way for us to change the app's site logo
and add a custom workflow? Has anyone come up with a solution?
Have you configured SharePoint Workflow Manager in the farm? Not sure if you are familiar with but in SharePoint 2013, there's a new component called Workflow Manager that needs to be configured to use SharePoint 2013 workflow.
Thanks,
Sohel Rana
http://ranaictiu-technicalblog.blogspot.com
I am using SharePoint Online. I have enabled the following site feature:
Workflows can use app permissions
Allow workflows to read from and to write to all items in this site.
just in case but it makes no difference. When I stop using my custom masterpage the app can install just fine and the workflow is working. When the custom masterpage is enabled the app won't install with the workflow. I am required to remove the workflow
to install the app.
Similar Messages
-
In the old pages you could simply copy the thumbnail and past a certain page into a different document.
The new pages does not allow you to do this.That and 95 other things it does not let you do.
Pages '09 should still be in your Applications/iWork folder, use that instead.
Peter -
'Master Options' for editing a master spread does not allow me to edit it.
I am trying to create various masters to a documents based on the original A Master.
instructions on InDeign Help, I selected the master I wish to edit,.
selected "Master Options' but it does not allow me to edit the new B master.
WTF?The reason for basing one master on another is that they need to have the same content on both masters, with other non-shared content on one or more. It makes sense most times to start with a Master page that contains only the shared content.
-
/uwc page does not allow log in after installation of sun jes 4
I am sure I have seen this before but am not sure how to remedy this - basically trying to log in on the /uwc/auth page does not give an error with any user but just wipes the username and password and returns the log in page again - anyone have any idea?
I did training a while back and am sure the instructor said that there may have been a typo in the instructions - possibly here - http://wireless.map.beta.com:80/uwc/base/UWCMain?op=logout in the configuring the messaging server for sso but am not sure.Sory Shane, didn't mean to be rude - just got taken up with other sunjes instals! basically we have a comms5 and 6 installation but I need to also install a sunjes 4 install - I am able to logon into messenger with username and password with regard to SSo I have done the following:
Configuring Single Sign-on (SSO) for Communications
Products
To set up SSO for Communications Express and for Access Manager/Portal Server, you edit the
uwcauth.properties file in the /var/opt/SUNWuwc/WEB-INF/config/ directory. You also need to
run the configutil utility for Messaging Server properties, and edit the ics.conf file for Calendar
Server.
➤ To Configure Communications Express for SSO
1. Verify the following settings in the
/var/opt/SUNWuwc/WEB-INF/config/uwcauth.properties file:
IS Administrator Password -- adminpass
Messenger Express Port [80] 8080
Calendar Server Hostname [wireless.map.beta.com] accept default
Calendar Server Port [9004] 3080
Calendar Admin user ID [calmaster] accept default
Calendar Administrator User
Password
-- adminpass
URL of PAB Directory Server [ldap://wireless.map.beta.com:389] accept default
Bind As [cn=Directory Manager] accept default
Password -- adminpass
Table 15 Values for config-uwc Script (Continued)
Option [Default Value] Enter:
Configuring Components
Part Number 819-4879-15 Page 33 of 62
2. Restart Web Server if you change any of the above settings.
➤ To Configure Messaging Server for SSO
1. To enable Communications Express users to access Messenger Express using the Access
Manager session, run the following configutil commands:
2. Stop then start Messaging Server:
cd /opt/SUNWmsgsr/sbin
./stop-msg
./start-msg
uwcauth.identity.enabled=true
uwcauth.identity.login.url=http://wireless.map.beta.com:80/amserver/UI/Login
uwcauth.identity.binddn=uid=amadmin,ou=people,o=isp
uwcauth.identity.cookiename=iPlanetDirectoryPro
uwcauth.identity.bindcred=adminpass
uwcauth.http.port=80
uwcauth.https.port=443
cd /opt/SUNWmsgsr/sbin
./configutil -o local.webmail.sso.amnamingurl -v \
http://wireless.map.beta.com:80/amserver/namingservice
./configutil -o local.webmail.sso.uwcenabled -v 1
./configutil -o local.webmail.sso.uwclogouturl -v \
http://wireless.map.beta.com:80/uwc/base/UWCMain?op=logout
./configutil -o local.webmail.sso.uwcport -v 80
./configutil -o local.webmail.sso.uwccontexturi -v "uwc"
./configutil -o local.webmail.sso.amcookiename -v iPlanetDirectoryPro
./configutil -o local.webmail.sso.uwchome -v http://wireless.map.beta.com/uwc
./configutil -o service.http.allowadminproxy -v yes
./configutil -o service.http.ipsecurity -v no -
The latest version of Mavericks does not allow a Pages document to become a 'stationery pad'! Is there a way to do this this other than through the 'Get Info' window? As Pages templates cannot be ordered in folders, my many templates are effectively unusable now and I need to find another way to order and access them.
Are you aware of that you can still use Pages 09 on Mavericks? You don't have to go thru the grieves of using the crippled Pages 5. Pages 09 should bi in Applications/iWork 09 folder.
-
This question was asked two months ago and never solved, so I thought I'd bring it up again, as it's new to me and perhaps Firefox has changed since then. I know it's Google, but as it pokes at Firefox, thought I'd take a shot. This is the previous question:
[[https://support.mozilla.com/en-US/questions/867479?s=firefox+access+to+clipboard&r=3&as=s|Previous question]]
Basically, when using GoogleDocs with a right-click cut/copy and paste, it doesn't function. I get the error message above: "Your browser does not allow access to your computer's clipboard." It's as simply broken as that. I recently had an issue in Firefox with the clipboard that required a system restore to solve, so that may be related.
I have done three different virus/malware scans on my computer, and everything comes back clean. Which it should be, as I'm a very careful user.Yes, that was the first thing that I tried. I really couldn't get it to do... anything useful at all. So I'm guessing it's somehow different in detail, though the question is the same; Firefox vs. the Windows clipboard. It's difficult of course, when working with Google, to figure out where Firefox's code issues end and Google's overblown invasive code begins.
At any rate, no, that extension did not help. But thank you for the suggestion.
I'm sure that there's a solution out there somewhere.... -
Adobe customer portal site does not allow me to choose my product and coninue
How can I contact Adobe Support when I get the below screen with the continue button greyed out? It does not allow me to choose my own product "Captivate" or any other one.
Thank you for helping, it still gives me the same problem though. It does not allow me to select my product (Captivae 4).
I also have some more challenges:
When I email the support email address for Africa I get no response.
When I change my region to Africa it defaults back to USA.
I am in the process of buying a multi user licence for the entire Adobe suite for my company "MTN South Africa" and is concerend about the above in case we need support from Adobe. Using the USA server is incredibly slow and we waste a lot of time opening the forums, knowlege base etc. I just timed it by clicking on the "support" link and it takes 26 secpnds to open. You can imagine wating half a minute when you navigate through the forumes, help files. support etc.
Thanking you in advance for helping.
I include an image below of the "continue" buttom that is "greyed out". -
Photoshop button added to master page does not apply to correct spot on pages attached
When working on the master page on the tutorial for Muse, after adding the photoshop button, it does not align correctly to the pages that are attached with the master file? It ends up underneath the footer and expanding the page longer than i fixed it to? How can I fix this?
Try to optimize the image that you are using, this can happen if you are using original file size being large enough to expand.
http://helpx.adobe.com/muse/topics/graphics.html
http://tv.adobe.com/watch/learn-adobe-muse-cc/optimizing-graphics-assets-in-muse/
Thanks,
Sanjit -
Changing number of columns on master page, does not affect pages?
I create a master page. say three columns per spread.
I go to actual pages, flow my type in with the loaded cursor and holding the shift key... it works like a charm... text flows in the three colums, adding pages until the end of the manuscript...
Now I decide I don't like the three columns. I go to the master page and change to 4 columns via "margins and columns..." under LAYOUT menu
I go to the pages assuming that any change in a masterpage will translate to the pages... NOT!
If I go to to my first page, the type is still in three colums...
All other changes I make on the masterpage do translate to the pages... like say a color bar at the top, the size and font of the folios... BUT NOT if I change the number of columns???
Can anyone shed light on this?You MUST tick the Option for "Master Text Frame" when Creating a new document.
OR you MUST include a Text Frame with the number of Columns on the master page.
Copy the text to the clip board
Delete all page except page 1
remove the existing text frame.
Drag the Master A to the page 1
CTRL or CMD (MAC) click shift the text frame to break it from the master.
Now paste your text in here
Insert a new page
And click the Overload (red cross) button and connect it to the page 2 hodling down shift.
From memory - hope I got it right ! -
Dispatch to custom 401 page does not always happen
hi,
I configured custom error401.jspx page to be dispatched to if user enters invalid credentials at login page or if authenticated user attempts direct url access to a page he is not authorized to access. This works most of the time, but sometimes instead of dispatching to 401 page system dispatches to Login page (the user is already logged in so this should not happen!). When this happens Login page looks like original ADF faces page but "face" color is lost, i.e. page is all black and white and it contains message Invalid username and password.
I configured ADF security to also dispatch to this 401 page in case of unauthorized access.
I am using jdev 10.1.3.2.
What is causing this behavior? It seems to happen more often on standalone than embedded oc4j. I checked web.xml and everything points to custom 401 page if unauthorized attempt. userInfo managed bean is identical to SRDemo.
Is there a workaround?Hi,
it is not loss of session as if I click Back button on browser I can proceed with application as currently logged in user.
I reproduce this in following way:
- I try to login as userA/roleA with wrong credentials
=> system dispatches to error401 page.....................OK
- on error401 page I click Home button which replicates SRLogout backing bean function...OK
=> system re-renders Login page...............OK
- I login as userA with correct credentials
=> system renders welcome page.............OK
- I use application as userA..................OK
- I try to access page accessible only to userB/roleB, using direct url access
=> system dispatches to error401 page...........................OK
- On error401 page (or clicking Back button on browser to go to previous page) I, (still logged in as userA/roleA) try to direct url access page belonging to userC/roleC
=> this time oc4j immediately dispatches to Login page (instead of error401 page) with message Invalid username and password...................................NOT OK
So it seems first time only it dispatches correctly but subsequent attempts it always go to Login page although session is not expired -
Faulty mp3 player and customer support page does not w
I sumitted my problem online to the customer support but when I hit the submit button I get redirected from http://us.creative.com/support/contact/emailform.asp to a non-working URL http://dmzrespapp.europe.creative.com/kana/FRH
I do not get an e-mail confirmation either. But maybe you can also help with my problem below
I have an Creative Micro Zen mp3 player
When I start or reboot the mp3 player it hangs at the 'CREATIVE' logo and stops responding. This started 3 weeks ago.
I followed the steps below as suggested by Creative's knowledge base:.) Clean up2.) Format3.) Reload Firmware4.) Reboot
At each of these steps the player does not hang (I can hear the sound feedback when I touch the control buttons), but I stays there for hours saying i.e. 'Cleaning up', 'Erasing Firmware'After I have read the FAQ I came across this last resort, tried it, and succeeded. Now it works again
http://www.nomadness.net/modules.php...ukebox+Zen#209
My Zen won't startup, what do I do?
align=justify>If your Zen won't startup the first thing to try is see if you can access the Maintenance Menu (click here for the procedure) and run a disk cleanup. If this fails, or if you are getting the "hard dri've error" message on startup, listen closely to the Zen when it starts up. If you can hear the hard dri've repeatedly clicking at the end of the start up chances are the heads or related mechanics are jammed in some way. <B>At your own risk</B> you can try and free this by firstly powering the player down, then giving it a hard slap on the side. An alternati've and less drastic approach is to hold it in your outstretched arm with the screen towards you and twist your wrist back and forth as quickly as you can. This might indicate a problem with the player, so you may want to seek getting your player replaced/repaired anyway, especially if this happens more than once. Also if this procedure doesn't help you will also have to look at getting the player repaired, or if out of warranty you can try repairing the hard disk yourself. See the Articles section for guides on upgrading. Note that you <B>should not hit your player</B> in any other circumstance as you could damage the hard disk. Hard disks make clicking noises in normal operation. -
Hi,
I have a table with many LONG fields (28). So far, everythings works fine.
However, if I add another LONG field I cannot insert a dataset anymore
(29 LONG fields).
Does there exist a MaxDB parameter or anything else I can change to make inserts possible again?
Thanks in advance
Michael
appendix:
- Create and Insert command and error message
- MaxDB version and its parameters
Create and Insert command and error message
CREATE TABLE "DBA"."AZ_Z_TEST02"
"ZTB_ID" Integer NOT NULL,
"ZTB_NAMEOFREPORT" Char (400) ASCII DEFAULT '',
"ZTB_LONG_COMMENT" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_00" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_01" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_02" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_03" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_04" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_05" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_06" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_07" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_08" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_09" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_10" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_11" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_12" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_13" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_14" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_15" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_16" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_17" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_18" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_19" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_20" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_21" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_22" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_23" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_24" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_25" LONG ASCII DEFAULT '',
"ZTB_LONG_TEXTBLOCK_26" LONG ASCII DEFAULT '',
PRIMARY KEY ("ZTB_ID")
The insert command
INSERT INTO AZ_Z_TEST02 SET ztb_id = 87
works fine. If I add the LONG field
"ZTB_LONG_TEXTBLOCK_27" LONG ASCII DEFAULT '',
the following error occurs:
Auto Commit: On, SQL Mode: Internal, Isolation Level: Committed
General error;-7032 POS(1) SQL statement not allowed for column of data type LONG
INSERT INTO AZ_Z_TEST02 SET ztb_id = 88
MaxDB version and its parameters
All db params given by
dbmcli -d myDB -u dbm,dbm param_directgetall > maxdb_params.txt
are
KERNELVERSION KERNEL 7.5.0 BUILD 026-123-094-430
INSTANCE_TYPE OLTP
MCOD NO
RESTART_SHUTDOWN MANUAL
SERVERDBFOR_SAP YES
_UNICODE NO
DEFAULT_CODE ASCII
DATE_TIME_FORMAT INTERNAL
CONTROLUSERID DBM
CONTROLPASSWORD
MAXLOGVOLUMES 10
MAXDATAVOLUMES 11
LOG_VOLUME_NAME_001 LOG_001
LOG_VOLUME_TYPE_001 F
LOG_VOLUME_SIZE_001 64000
DATA_VOLUME_NAME_0001 DAT_0001
DATA_VOLUME_TYPE_0001 F
DATA_VOLUME_SIZE_0001 64000
DATA_VOLUME_MODE_0001 NORMAL
DATA_VOLUME_GROUPS 1
LOG_BACKUP_TO_PIPE NO
MAXBACKUPDEVS 2
BACKUP_BLOCK_CNT 8
LOG_MIRRORED NO
MAXVOLUMES 22
MULTIO_BLOCK_CNT 4
DELAYLOGWRITER 0
LOG_IO_QUEUE 50
RESTARTTIME 600
MAXCPU 1
MAXUSERTASKS 50
TRANSRGNS 8
TABRGNS 8
OMSREGIONS 0
OMSRGNS 25
OMS_HEAP_LIMIT 0
OMS_HEAP_COUNT 1
OMS_HEAP_BLOCKSIZE 10000
OMS_HEAP_THRESHOLD 100
OMS_VERS_THRESHOLD 2097152
HEAP_CHECK_LEVEL 0
ROWRGNS 8
MINSERVER_DESC 16
MAXSERVERTASKS 20
_MAXTRANS 288
MAXLOCKS 2880
LOCKSUPPLY_BLOCK 100
DEADLOCK_DETECTION 4
SESSION_TIMEOUT 900
OMS_STREAM_TIMEOUT 30
REQUEST_TIMEOUT 5000
USEASYNC_IO YES
IOPROCSPER_DEV 1
IOPROCSFOR_PRIO 1
USEIOPROCS_ONLY NO
IOPROCSSWITCH 2
LRU_FOR_SCAN NO
PAGESIZE 8192
PACKETSIZE 36864
MINREPLYSIZE 4096
MBLOCKDATA_SIZE 32768
MBLOCKQUAL_SIZE 16384
MBLOCKSTACK_SIZE 16384
MBLOCKSTRAT_SIZE 8192
WORKSTACKSIZE 16384
WORKDATASIZE 8192
CATCACHE_MINSIZE 262144
CAT_CACHE_SUPPLY 1632
INIT_ALLOCATORSIZE 229376
ALLOW_MULTIPLE_SERVERTASK_UKTS NO
TASKCLUSTER01 tw;al;ut;2000sv,100bup;10ev,10gc;
TASKCLUSTER02 ti,100dw;30000us;
TASKCLUSTER03 compress
MPRGN_QUEUE YES
MPRGN_DIRTY_READ NO
MPRGN_BUSY_WAIT NO
MPDISP_LOOPS 1
MPDISP_PRIO NO
XP_MP_RGN_LOOP 0
MP_RGN_LOOP 0
MPRGN_PRIO NO
MAXRGN_REQUEST 300
PRIOBASE_U2U 100
PRIOBASE_IOC 80
PRIOBASE_RAV 80
PRIOBASE_REX 40
PRIOBASE_COM 10
PRIOFACTOR 80
DELAYCOMMIT NO
SVP1_CONV_FLUSH NO
MAXGARBAGECOLL 0
MAXTASKSTACK 1024
MAX_SERVERTASK_STACK 100
MAX_SPECIALTASK_STACK 100
DWIO_AREA_SIZE 50
DWIO_AREA_FLUSH 50
FBM_VOLUME_COMPRESSION 50
FBM_VOLUME_BALANCE 10
FBMLOW_IO_RATE 10
CACHE_SIZE 10000
DWLRU_TAIL_FLUSH 25
XP_DATA_CACHE_RGNS 0
DATACACHE_RGNS 8
XP_CONVERTER_REGIONS 0
CONVERTER_REGIONS 8
XP_MAXPAGER 0
MAXPAGER 11
SEQUENCE_CACHE 1
IDXFILELIST_SIZE 2048
SERVERDESC_CACHE 73
SERVERCMD_CACHE 21
VOLUMENO_BIT_COUNT 8
OPTIM_MAX_MERGE 500
OPTIM_INV_ONLY YES
OPTIM_CACHE NO
OPTIM_JOIN_FETCH 0
JOIN_SEARCH_LEVEL 0
JOIN_MAXTAB_LEVEL4 16
JOIN_MAXTAB_LEVEL9 5
READAHEADBLOBS 25
RUNDIRECTORY E:\_mp\u_v_dbs\EVERW_C5
_KERNELDIAGFILE knldiag
KERNELDIAGSIZE 800
_EVENTFILE knldiag.evt
_EVENTSIZE 0
_MAXEVENTTASKS 1
_MAXEVENTS 100
_KERNELTRACEFILE knltrace
TRACE_PAGES_TI 2
TRACE_PAGES_GC 0
TRACE_PAGES_LW 5
TRACE_PAGES_PG 3
TRACE_PAGES_US 10
TRACE_PAGES_UT 5
TRACE_PAGES_SV 5
TRACE_PAGES_EV 2
TRACE_PAGES_BUP 0
KERNELTRACESIZE 648
EXTERNAL_DUMP_REQUEST NO
AKDUMP_ALLOWED YES
_KERNELDUMPFILE knldump
_RTEDUMPFILE rtedump
UTILITYPROTFILE dbm.utl
UTILITY_PROTSIZE 100
BACKUPHISTFILE dbm.knl
BACKUPMED_DEF dbm.mdf
MAXMESSAGE_FILES 0
EVENTALIVE_CYCLE 0
_SHAREDDYNDATA 10280
_SHAREDDYNPOOL 3607
USE_MEM_ENHANCE NO
MEM_ENHANCE_LIMIT 0
__PARAM_CHANGED___ 0
__PARAM_VERIFIED__ 2008-05-13 13:47:17
DIAG_HISTORY_NUM 2
DIAG_HISTORY_PATH E:\_mp\u_v_dbs\EVERW_C5\DIAGHISTORY
DIAGSEM 1
SHOW_MAX_STACK_USE NO
LOG_SEGMENT_SIZE 21333
SUPPRESS_CORE YES
FORMATTING_MODE PARALLEL
FORMAT_DATAVOLUME YES
HIRES_TIMER_TYPE CPU
LOAD_BALANCING_CHK 0
LOAD_BALANCING_DIF 10
LOAD_BALANCING_EQ 5
HS_STORAGE_DLL libhsscopy
HS_SYNC_INTERVAL 50
USE_OPEN_DIRECT NO
SYMBOL_DEMANGLING NO
EXPAND_COM_TRACE NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC YES
OPTIMIZE_JOIN_PARALLEL_SERVERS 0
OPTIMIZE_JOIN_OPERATOR_SORT YES
OPTIMIZE_JOIN_OUTER YES
JOIN_OPERATOR_IMPLEMENTATION IMPROVED
JOIN_TABLEBUFFER 128
OPTIMIZE_FETCH_REVERSE YES
SET_VOLUME_LOCK YES
SHAREDSQL NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT 1500
SHAREDSQL_COMMANDCACHESIZE 32768
MEMORY_ALLOCATION_LIMIT 0
USE_SYSTEM_PAGE_CACHE YES
USE_COROUTINES YES
MIN_RETENTION_TIME 60
MAX_RETENTION_TIME 480
MAX_SINGLE_HASHTABLE_SIZE 512
MAX_HASHTABLE_MEMORY 5120
HASHED_RESULTSET NO
HASHED_RESULTSET_CACHESIZE 262144
AUTO_RECREATE_BAD_INDEXES NO
LOCAL_REDO_LOG_BUFFER_SIZE 0
FORBID_LOAD_BALANCING NO>
Lars Breddemann wrote:
> Hi Michael,
>
> this really looks like one of those "Find-the-5-errors-in-the-picture" riddles to me.
> Really.
>
> Ok, first to your question: this seems to be a bug - I could reproduce it with my 7.5. Build 48.
> Anyhow, when I use
>
> insert into "AZ_Z_TEST02" values (87,'','','','','','','','','','','','','','','',''
> ,'','','','','','','','','','','','','','','','')
>
> it works fine.
It solves my problem. Thanks a lot. -- I hardly can believe that this is all needed to solve the bug. This may be the reason why I have not given it a try.
>
Since explicitely specifying all values for an insert is a good idea anyhow (you can see directly, what value the new tupel will have), you may want to change your code to this.
>
> Now to the other errors:
> - 28 Long values per row?
> What the heck is wrong with the data design here?
> Honestly, you can save data up to 2 GB in a BLOB/CLOB.
> Currently, your data design allows 56 GB per row.
> Moreover 26 of those columns seems to belong together originally - why do you split them up at all?
>
> - The "ZTB_NAMEOFREPORT" looks like something the users see -
> still there is no unique constraint preventing that you get 10000 of reports with the same name...
You are right. This table looks a bit strange. The story behind it is: Each crystal report in the application has a few textblocks which are the same for all the e.g. persons the e.g. letter is created for. Principally, the textblocks could be directy added to the crystal report. However, as it is often the case, these textblocks may change once in a while. Thus, I put the texts of the textblock into this "strange" db table (one row for each report, one field for each textblock, the name of the report is given by "ztb_nameofreport"). And the application offers a menue by which these textblocks can be changed. Of course, the fields in the table could be of type CHAR, but LONG has the advantage that I do not have to think about the length of the field, since sometime the texts are short and sometimes they are really long.
(These texts would blow up the sql select command of the crystal report very much if they were integrated into the this select command. Thus it is realized in another way: the texts are read before the crystal report is loaded, then the texts are "given" to the crystal report (by its parameters), and finally the crystal report is loaded.)
>
- MaxDB 7.5 Build 26 ?? Where have you been the last years?
> Really - download the 7.6.03 Version [here|https://www.sdn.sap.com/irj/sdn/maxdb-downloads] from SDN and upgrade.
> With 7.6. I was not able to reproduce your issue at all.
The customer still has Win98 clients. MaxDB odbc driver 7.5.00.26 does not work for them. I got the hint to use odbc driver 7.3 (see [lists.mysql.com/maxdb/25667|lists.mysql.com/maxdb/25667]). Do MaxDB 7.6 and odbc driver 7.3 work together?
All Win98 clients may be replaced by WinXP clients in the near future. Then, an upgrade may be reasonable.
>
- Are you really putting your data into the DBA schema? Don't do that, ever.
> DBM/SUPERDBA (the sysdba-schemas) are reserved for the MaxDB system tables.
> Create a user/schema for your application data and put your tables into that.
>
> KR Lars
In the first MaxDB version I used, schemas were not available. I haven't changed it afterwards. Is there an easy way to "move an existing table into a new schema"?
Michael -
Starting iTunes 11 with the option key does not allow me to link my ipad with Remote
I am using my Macbook Pro as a pure music server with a 2TB external USB 3 HD where all my music resides in a single folder. Yet when I start iTunes by holding the option key (to allow iTunes to see the 2TB folder and not import all my music), the Devices tab is grayed out and hence my iPad3 is not recognised. As a result, I cannot use Apple's Remote App.
The same hardware, does allow my to import a small named Library when the iPad is recognised.
What gives? Any suggestions would help me to keep my hair!Try a Skype reset:
http://community.skype.com/t5/Security-Privacy-Trust-and/Skype-name-and-Skype-MS-accounts/m-p/293557...
You may also want to test it out in Safe Mode with Networking to see if anything changes. Since Skype uses IE in the background make sure you Internet Explorer is able to browse web pages without restriction or that it isn't in some type of forced offline mode. -
Since Mavericks I am experiencing problems most probably related to iCloud:
the iCloud preference pane takes minutes to open; mail tasks hang on iCloud mail account ; Pages hangs before displaying list of icloud files.
I have managed to stop the problems by disabling the iCloud keychain - so it may well be related to that.
Any similar experiences or even solutions ?1.Use free AdwareMedic to remove the adware
http://www.adwaremedic.com/index.php
Download, install , open, and run it by clicking “Scan for Adware” button to remove adware.
Once done, quit AdwareMedic.
or
Remove the adware manually by following the “HowTo” from Apple.
http://support.apple.com/en-us/HT203987
2. Safari > Preferences > Extensions
Turn those off and relaunch Safari to test .
Turn those on one by one and test.
3. Safari > Preferences > Search > Search Engine :
Select your preferred search engine. -
Having troubles with a firefox page and not allowing me to change my homepages
Everytime I open Firefox the tab "http://www.mozilla.org/en-US/firefox/9.0.1/whatsnew/" opens and I can't stop it. Even though it isn't set as a homepage. Also, I can't change my homepages. When I change them, the changes aren't saved, it reverts to the original ones. Also, I am running the latest version
see in this [https://support.mozilla.org/en-US/questions/910038 link] the '''Solution Chosen''' by '''Matt_G '''and this is the solution to your problem
thank you
Maybe you are looking for
-
Change master data setting - Vendor reconciliation account
Is it possible to change the configuration of a G/L account currently setup as a vendor reconciliation account (that has a balance) to a regular a balance sheet sheet account? If yes, what actions do I need to do? Are there any risks in doing this? C
-
How long does it take to get my X61 checked from water spill?
Hi, I had spilled some water into my X61 yesterday. Though I instantly shut it down and try to clean, I was too stupid to try to boot it in ten minutes. Not sure if it is "OK" right now.... Does anyone have the same experience? Could you share how lo
-
So heres the deal. About 3 years ago I copied about 200 of my CDs to my computer as .wav files. I manually entered them into folders to organixe them by band / album name although the tracks are listed as "Track 1, Track 2, etc. About a year ago the
-
Cost manager status is inactive with no manager(ERGENT)
Hi, All the cost manager requests are running in error and the cost manager downs once the request is finished. Error log: APP-FND-01564: ORACLE error 12500 in AFPCOA Cause: AFPCOA failed due to ORA-12500: TNS:listener failed to start a dedicated ser
-
Forgot lockscreen passcode then how to remove it
Hi, I just forgot the lockscreen passcode of my iPhone 5S. I have searched the fourms and found out there were a couple of good answers already. However, the thing is a bit different from my side as I just wiped my harddisk and no backup on the compu