UWL Collaboration Task with Numeration

Hello
Is it posible to customize Collaboration Tasks with xml-File so that the table displays an additional field (e.g. like tasknumber) for each new task entry?
If this requirement is only solvable by custom development, where can i find examples or tutorials about.
Regards Michael

Hi,
One way is to develop a java webdynpro application and launch it from your UWL. You can create the application which calls RFCs to retrieve data from R/3 and displays it in the application. You can also create the two buttons and assign appropriate actions for those buttons.
To launch the webdynpro application from UWL you need to configure the XML file. This is usually done with the help of SWFVISU transaction. But in your system (since it is of older version) this transaction might not exist. Hence you need to create the XML file manually and upload it.
Refer the following blog and some other blogs by Ginger Gatling for more idea.
/people/ginger.gatling/blog/2006/01/27/understanding-how-uwl-gets-work-items-from-backend-systems
Thanks,
Prasath N

Similar Messages

UWL: status of collaboration tasks

Hello SDN folks,
I'm currently struggeling with the following question:
Is it possible to add new custom status-values (already availables are inprogress, ceompleted etc.) for UWL collaboration tasks? I want to display the custom status-value then as an action in the context menu for the affected itemTypes.
If yes, yould you shortly give any hint where to start?
Thanks for your efforts,
Frank

Hi Dwayne,
According to your description, my understanding is that you want to add a column into the document library to show the Task Status.
Assuming you create a new column called “Status” in the document library(called “doc_approval”) used as showing Task Status, then you need to create a new workflow on your tasks list.
You can design this workflow as the following screenshot, and set this workflow start automatically when an item is changed.
For the first red area, the variable:ID is an Integer.
For the IF condition, you need to set it like the below:
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Email Notifications for UWL Tasks and Collaboration Tasks

Hi,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
I done with the all the Configurations suggested in the below link:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/706d054d-da24-2b10-f18a-fc82faf6468e]
But Email Notifications are not reaching the users Lotus Mail ID. Could any one please suggest me that i am missing any Configurations.
Thanks in Advance.
Regards,
Sridhar.

Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert

Email Notifications for both UWL Tasks and Collaboration Tasks.

Hello,
I want to configure Email Notifications for both UWL Tasks and Collaboration Tasks.
Could any one please give me the configuration steps.
Thanks in Advance.
Regards,
Sridhar.

Hi sri,
Refer the following threads
https://www.sdn.sap.com/irj/scn/thread?threadID=147316
https://www.sdn.sap.com/irj/scn/thread?messageID=315715#315715
https://www.sdn.sap.com/irj/scn/thread?messageID=1170132#1170132
Regards,
P.Manivannan

Collaboration Task separated from KM task

Hello All,
In Collaboration > My Task, both KM as well as Collaboration tasks are coming like Feedback, Approval etc..
1) How can i segregate Collaboration Task from the KM Task in Collaboration Content?
Collaboration Task - Using uwl.collaboration
Home Task - Using uwl.standard
2) Both are same or different?
Regards,
Mythili

Hi
I can answer your second question
Home - Work - Overview -- uwl.standard - part of end user role
this leads to UWL Standard iview with full list of functions.
Collaboration Task - uwl.collaboration - Part of collaboration Role -
This is pre-configured to list collaboration task Only.
I hope i gave u some info to u
Reg
Vijay.

Updated uwl.collaboration.xml but can't see any change

Hello,
at the UWL configuration there are 3 xml files which can be modified in order to modify the User view.
I have followed the instructions at this PDF in order to modify the collaboration view:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/how to configure the universal worklist.pdf
I have uploaded new uwl.collaboration.xml xml with medium priority by the name uwl.collaboration_test.xml and cleared the UWL cache (even restarted the server) but I don't see that the modification is taking place.
Has anyone got a chance to deal with these xmls? Should I do something more in order to commit my costumized xml to the User's view?
Roy

Hi Roy,
I remember there are several (I think 3) "My Tasks" iViews in the portal (search portal content).
I don't know the exact difference between them, but I remember that only one of them was influenced by the changes to the xml configuration files.
Therefore, I suggest to check whether your changes influenced one of the other iViews.
Other than that, the instructions in the PDF you mentioned should work. I don't remember any other modification needed that wasn't described in the document.
Hope that helps,
Yoav.

How to add new fields in collaboration tasks?

Hi experts,
Currently, by default, we are able to see in the collaboration tasks rooms fields as "Subject", "From", "Sent Date" , "Due Date" ,
"Status"...
Now i want to add new custom fields apart from standard; when i create new tasks i want fill this new fields and after, display this fields in the UWL.
Can you please let me know how to add our own fields in the collaborations tasks rooms ?
Thanks in advance,
Regards,

Hi Victor Capi,
Could you have a look at the following link.
http://wiki.sdn.sap.com/wiki/display/KMC/XMLFormBuilderinEP7.0
Formsbuilder open the collaboration project and you add the fields. Then import the xml to your portal.
Regards,
Prabha

Email Notifications for Collaboration Tasks are Not going to Lotus Notes

Hello Everyone,
Email Notifications for the Tasks in Collaboration are not going to Lotus Notes. We are working on EP 7.0 SP14 with external ITS and backend r/3 4.7.
I performed all the configuration activities that are suggested in the below wiki:
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageId=61244035
It was worked fine once for me when i perfomed the activities mentioned in the below thread:https://www.sdn.sap.com/irj/scn/thread?threadID=147316
But after restarting our Portal Server the Email Notifications for Collaboration Tasks are not coming.
Could any one please suggest that we need to do any other configurations.Thank you.
Regards,
Sridhar.
Edited by: Sridhar on Mar 18, 2009 12:14 PM

Hi Sridhar,
I created a Wiki page with usefull links to troubleshoot problems with the Email connectivity from KM:
https://wiki.sdn.sap.com/wiki/x/g4KmAw
Please see if it helps,
Robert

BlackBerry Link and syncing Contacts, Calendar and Tasks with stand-alone desktop installation of Outlook 2010?

I have used Blackberries in business since the beginning. Fantastic products!
Sadly after spending the better part of Feb 6th transitioning from Torch to Z10 I have had to abandon the effort and request an RMA number to return the Z10.
Here is why:
"Link" appears to be focussed on syncing documents and media like content such as music and movies but does not, from what I can tell, sync Outlook Contacts, Calendar entries or Tasks. I have never bothered putting music or movies on a BB... never had the time to fuss with such... however, I use, edit and sync my Contacts, Calendar and Tasks between my Torch and my desktop PC every day... as in EVERY day!
From a review of postings on various forums there does not appear to be a solution in the works to this problem and the trend appears to be to use a Cloud based email or service to host such "PIM" information and then sync the handheld to the Cloud repository. This method MAY be suitable for some forms of info but it is not suitable to post such personal info on the cloud... it needs to stay on the desktop and in the handheld device, both of which are password protected and looked after carefully.
This is an odd situation, BB (RIM) cut their teeth on pages, emails, BBM and great cell calls, mainly in a business environment. Many small business users live and die on their BB. They do not run Exchange Server... they run Outlook stand alone on a desktop. To remove this functionality from the Z10 (BB10 overall perhaps) seems at best to be a serious oversight.
I wish BB the best with the Z10 and hope to see it do well. For me, I had to make a choice between the efficiency and effectiveness of syncing Outlook Contacts, Calendar and Tasks with the Torch, or hand feeding and maintaining thousands of constantly changing entries into what is undoubtedly a more powerful and wonderful looking Z10. Efficiency and effectiveness won over brawn and beauty. The Torch is back on line... It's a tool... a really great tool! Tomorrow it will process a hundred emails, numerous SMS messages, a few BBM's, keep me on time and feed me a bunch of useful phone numbers and addresses as it has for a couple of years now. It will also spend an hour or so teathered to my laptop at a remote location where there is cell coverage but no internet. It will NOT display any movies, tweats, twits, or facebook stuff that I won't have time to look at anyway. The fast, powerful, shiny Z10 is heading in an RMA bag back to Telus.
I have a sort of sick feeling in my gut and hope to be able to sync again in the future!

my feelings and my situation excatly

Object visualization to open attachment link in UWL decision task workitems

We are using Object Visualization (in t-code SWFVISU) to open an I-view when you click the attachment link in decision task workitems. I sort of have this working. My issue is that I need to pass parameters to the I-view. I'm not sure how to do that. I've seen some documentation on dynamic parms in SWFVISU (DYNPARM) but I don't see that option (maybe we are on an older version). Maybe we can via XML files? I've done Task visualization and edited xml files but I'm not sure if we can do similar code for object visualization. Does anyone know how to do this? Have any samples/documentation?
Thanks,
Matt

Hi Matthew,
Check if the following links help you:
/people/raja.thangamani/blog/2007/03/27/bsp-with-workflow-part-i
/people/ginger.gatling/blog/2005/12/14/create-new-uis-for-existing-workflow-tasks-with-abap-web-dynpro-and-universal-worklist
Problems with bitmaps and tables on the visualization
/message/6725781#6725781 [original link is broken]
Re: WD java application in UWL link has authentication problems !
Regards,
Saumya

UWL & Collaboration Room Creation

Hi all,
We are in a situation where in we are asked to install/configure UWL and make some developers use them.
How do we know UWl is installed with Portal and configured ? what are the steps to install,configure and assign it to users ?
And we need to confgiure collaboration rooms for few users.How do we configure collaboration rooms ?
Any help on this would be greatlty appreciated.
Addy

Addy,
Refer to this thread for [UWL configuration|https://www.sdn.sap.com/irj/scn/thread?messageID=5744636#5744636]
Look into this for [collaboration|https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageId=18897]
This thread might also be handy.
https://www.sdn.sap.com/irj/scn/thread?messageID=5114809#5114809
P.S If this information is not handy, please search through the forums, there are ample documents on the same.
Good Luck!
Sandeep Tudumu

Transfer collaboration rooms with all content

Hello All,
I am on SP12 EP & KMC.
Need to transfer collaboration rooms with all content of Rooms from DEV to PRD server.
How do we ensure that all memberships, subscriptions, tasks, documents, document metadata, ++ is transferred?
Have seen the link
Collaboration Room Transport
Are there any known issues in this?
Have anyone done this and what all issues can be taken care of.
Please update..
Regards
Suneel Razdan

Hi Suneel,
you can only transport collaboration room templates, unfortunately not the existing rooms :-(!!!!!!!
to transport collaboration templates refer to
How to transport collaboration room parts?
Hope this helps,
Regards,
Uma.

How to write to one channel of a task with multiple channels? (plus other things...)

So I have a USB-6009 DAQ. It has 12 digital output lines. I want one channel that is "Dev0\line0:10" which represents an address bus in my application. And a second channel "Dev0\line11" which represents a program enable line in my application.
I have tried creating two different tasks and adding one channel to one task and the other channel to the other task. The only task that worked was the task with "Dev0\line0:10". It was always the task containing that channel, regardless of the order of creation. So then I moved on to a different method. (I read somewhere that I should only create one task of each type. like only 1 DO task only 1 AO task etc... However I am also using the two analog ouputs to and have a task for each AO and they work just fine.)
I tried add both channels to one task. But when I needed to control only the address bus, I had to have some information for the other channel as well. This was a little trying, but I could configure it that way. But it turned out to be easier for me to just make one channel with all the lines and OR in the data for line11 with each write.
I just wondered if it was possible to write to one particular channel of a task and not the other channel? That would really be the ideal solution for me. especially if I could write multiple samples to the one channel while I left the other channel alone. Which brings up another complaint... Why does WriteMultiSamplePort only work if I use a DigitalMultiChannelWriter, and not if I use a DigitalSingleChannel writer even though my task only has one channel (and by the way I set up the channel as one channel for all lines)? A perplexing issue to be sure.
And no I can't just load all my samples into an array and write them all at once because I also have to manipulate the two analog outputs in between the various digital writes.
I am using NI DAQmx 7.5 and C#. I am trying to use the DAQ to program a digital switch, which has proven to be a real challenge. In push-pull mode there is too much ringing for the switches programming port to tolerate. But the switches interface is LVTTL, so I needed the 3.3V. When I changed to open-collector I had to use voltage dividers to drop down to 3.3V. But the rise time using open-collector is too slow for me the program the switch in serial mode, so I had to change to parallel. The switch has an 11 bit multi-plexed ADDR/DATA bus. So the DAQ I had chosen to use which had plenty of lines for the serial programming, now is strained to it's absolute limits by the parrallel interface. ARGH. The only output I am not currently using is the counter, and I'm going to need it if I ever want to read back from the switch. But first I have to seperate the ADDR/DATA bus from the CS line on the DIO lines of the DAQ. And I don't know for sure what I'm going to do about the voltage level translation when I have to go bi-directional. Maybe I can filter out the ringing in push-pull mode? Any thoughts on that?

Hi Saikey,
In most cases, you are exactly right: you can only use one task for one type of operation (i.e. only one analog input task in the same program). With the USB 6009, you can have multiple digital output tasks running at the same time. I was able to run a digital output program with two different digital output tasks configured for a USB-6009.
However, you stated that it would be better if you had everything in a single task for your application and write data to only some of the channels. The easiest way to do this is to modify your array of output data so that only the data to that one channel is changing. So, for example, if you keep writing a 0 to the channels that do not need new data nothing will change.
If you have to change your analog outputs during this program, you could create an event structure that would stop and restart the analog output tasks without changing the digital output data. I hope that you find this information helpful.
Regards,
Hal L.

How to use a multiple boards (6321/6323) analogical acquisition task with simultaneous analogical generation task using the same boards (Labwindows CVI10)

Subject : it seems impossible to run a multiple boards analogical acquisition task with one or several analogical generation task using the same boards.
NI Configuration : Dev1 = Dev2 = 6321 boards
Development environnement : LabWindows CVI 10
Source code for analogical acquisitino task :
       DAQmxCreateTask("",&AIRecordingtaskHandle);
       DAQmxCreateAIVoltageChan(AIRecordingtaskHandle,chan,"",DAQmx_Val_NRSE,min,max,DAQmx_Val_Volts,NULL);
       DAQmxCfgSampClkTiming (AIRecordingtaskHandle, "", rate, DAQmx_Val_Rising, DAQmx_Val_FiniteSamps, sampsPerChan);
       DAQmxGetTaskAttribute(AIRecordingtaskHandle,DAQmx_Task_NumChans,&gNumChannels);
Chan = "Dev1/ai0, Dev1/ai1, Dev1/ai2, Dev2/ai1"
Source code for analogical generation taskS :
       DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C1_DAC0));
       DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C1_DAC0, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev1/ao0
       DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C1_DAC1));
       DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C1_DAC1, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev1/ao1
       DAQmxErrChk (DAQmxCreateTask("",&AOtaskHandle_C2_DAC0));
       DAQmxErrChk (DAQmxCreateAOVoltageChan (AOtaskHandle_C2_DAC0, chan, "", min, max,DAQmx_Val_Volts, "")); // chan vaut Dev2/ao0
At the first DAQmxReadBinary call attempt, the system shows an error (see attached document)
What we understand about that error : it is impossible to run the two set of tasks (ai and ao) using ressources from both Dev1 and Dev2 in the set of tasks because it is not allowed to use the same Reference Clock for that.
The question is : is there a way to to that without having that kind of message?
We tried different combinations :
- Using only one ao task (on Dev1/Dac0) : same error
- Not using any ao task (only the ai task) : no error
- configuring the ai task with only channel from Dev1 : no error
- Using "/Dev1/ai/SampleClock" as internal clock for the ai task and "/Devk/ao/SampleClock" for each ao task (k standing for "1" or "2" depending of the ao task we consider) : error
Thanks a lot.
Pièces jointes :
MsgErreur NIDAQmx.JPG ‏38 KB

doublon
Valentin
Certified TestStand Architect
Certified LabVIEW Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Error enabling "Mail, Contacts, Calendars, and Tasks with Outlook" in iCloud 3.0 Control Panel

Unable to enable option “Mail, Contacts, Calendars, and Tasks with Outlook” under iCloud 3.0 Control Panel.
Get following error when clicking checkbox to enable it under iCloud 3.0 Control Panel.
"Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
Have tried the following:
Uninstalled / reinstalled iCloud 3.0 control panel
Removed all mail accounts from Outlook 2013 except MS account
Confirmed Outlook was chosen for “Always uses this profile” under Control Panel – Mail (MicroSoft Outlook 2013) – show profiles
Still get the same error when trying to enable the option under iCloud 3.0 Control Panel
PC is running Windows 8.1 (64 bit)
Outlook 2013 was just installed on the PC as part of new Office 2013 installation

Two more things:
First, sorry for the bad spelling, grammar, and all of that. English isn't my first language and I'm so frustrated at this point I'm not paying any attention to it. Sorry!
Second, after trying to repair again the icloud 3.0 through the Control Panel of Windows, guess what? It made Offce to crash again! Now I will have to install it again.
=(

UWL Collaboration Task with Numeration

Similar Messages

Maybe you are looking for