UWL Columns Lay Out - Buffering Issue

Hi All.
I have a weird buffering issue in UWL.
I removed non required UWL tabs and UWL features. My UWL now looks very slim.
It's only contains single "Tasks" tab without any fancy WF features.
In terms of column, it's have: subject, from, sent, priority, attachment and completed date
When user login into UWL, columns displayed as: subject, priority, Recipients, attachment and alerttitle.
It is different from what I configured.
To get into required columns, user have to click on "Show", select "Completed Tasks" and back, select "New and In Progress Tasks". Once user perform this sequence then the columns layout displayed as per UWL configuration.
Sounds like buffering issue for me.
Any body out there have similar issue and know how to solve it?
Thanks

Hi,
Clear the cache
>UWL> UWL admin> cache admin
then try the same.
Hopefully it should work
Thanks
Muthukumar

Similar Messages

Need advice on choosing programs for laying out and editing books

I've been editing books in Microsoft Word but my clients are asking me to help do the layout and prep to take their books to a printer.
I am looking to find out what the least expensive (for now) but necessary programs I would need to purchase in order to take a book from a Word manuscript to print-ready.
Please let me know what programs I need (at a minimum) - someone mentioned InDesign and InCopy, would I need anything else?
I will also need to purchase a new laptop and need to know what the minimum requirements would be to run such programs i.e. how much hard drive space, speed and ram.
I currently have a Gateway, but it is dying.
Thank you.

As Daniel says, if you have InDesign and you're the only one working on the docuument, that's all you need. Think of InCopy as a hugely-stripped-down version with only the text editor in it, but you can do everything you need in InDesign (either writing the text directly into the document, or importing formatted text from Word). InDesign has great typography features and a basic spellchecker, Word has less-advanced typography but can check grammar.
The typical workflow in a newsroom will split copywriting from layout, as the journalists aren't allowed to format the page and the graphics dept can't write articles. So, the text is written in InCopy by a bunch of people, who then pass the content to someone with InDesign who imports it and lays out the issue. InCopy basically allows people to write a chunk of text that will fit in a certain space, but it doesn't care what the overall document looks like. It has some very powerful features for collaboration, but to put it bluntly, text is text - provided you get the styles mapping sorted, ID doesn't care where it comes from.
Unless you're working with this split-job-role system there's no reason you'd need to use InCopy.
OLIVE C. F. wrote:
Thank you for the tips. I will need InCopy then as that is a major part of what I do.
Sent via DroidX2 on Verizon Wireless™

Adding a column in the Universe level without losing the Report Lay out

Hi all,
I have one universe with three universes built on it. Now, I want to add a column to one of the tables in the universe. For that, I selected the table and gave 'Refresh the structure'. The column got added in the workspace of the universe. When I drag and drop the table to the class & objects panel, it got added to the class/table in the panel. I saved and exported the universe.
When I do like above, and open the report in the BO XI R3.1 webi front end, the report throws the following error:
'Universe contains unresolved objects' and the report lay out is lost. All the three reports built on this universe is throwing the same error.
Please let me know if there is any other way to retain the report lay out and add the column in the universe level.
Thanks in advance
- Regards,
Arun

Welcome to the sometimes frustrating world of working with dates against SAP BW via BusinessObjects!
Your best bet here is to have a financial calendar table in a database and build a new query against that. Return Week Number as a detail of date and then merge the date dimensions.

Problems and Issues in Laying Out Our Journal

Thank you to everyone who responded to my last post. On your advice, I have decided to persist in my efforts in making a template for our Law Journal using InDesign. There are several remaining issues I have though which, though small perhaps, are fairly critical. Perhaps someone might give me some guidance on this.
I am not sure which overall compilation method I should use. Ie) Either placing the individual word documents in or making a 'book' out of the individual articles. I would use whichever method can provide for the following conditions:
1) Continuity of page numbers. The first article should start at 1, and page numbers should NOT restart at the beginning of each article.
2) Continuity of footnotes. Foot notes SHOULD restart at 1 at the beginning of each article.
3) Page headers. Left side pages will have the page number and name of the Journal. Right page headers are to have the page number and the name of the current article. Would it be best to use different masters with the corresponding page headers on them? Would this maintain the above mentioned page and footnote continuities?
4) As per usual in books, there should be no page numbers on each article title page, which should always be starting on a right page.
5) Use of masters. Currently I have single masters pages set up for the half-title page
So, these are the issues which I have. I don't know how to incorporate these items in the template. It is fairly important that I have a good working template in order to avoid having to re-do all this work for each volume, as the person in charge of layout will change from year to year and likely not have the time to learn the ins and outs of InDesign. Any help on these issues would be wonderful!
Thanks!

I lay out an academic journal. This is my method:
Take in Word docs. Check style names to make them reasonably conform to style names in InDesign template. (They're case sensitive.)
Word tables are imported into a separate InDesign template that makes it easier to tweak them before re-inserting into article.
Word figures are saved as PDF/redone in Illustrator.
In InDesign, I open a blank file from a template and place the article, mapping Word style names to InDesign style names. I fine-tweak the tables in a separate InDesign file and place those pages into these pages.
I save each article in a separate file, make a pdf to send out for proofing.
After the first round of proofing, which includes the authors, I make corrections and put together a book according to the TOC.
For the second round of proofing and for production, I make a pdf of the book.
After production, I supply individual article pdfs for archiving.
The template has 3 master pages: one for the article opener, one (spread) for the main pages, and one for blank pages that has only the page number and no running heads. The template has 16 pages and I add pages in multiples of 4 if needed, or delete pages that aren't used.
I did one year with the entire issue in one file, but I found the book method much more efficient. Page numbering and footnote numbering is no problem.
best
R_W

Apple TV (2nd gen) - Very Specific Buffering Issue

I have been watching the threads regularly for a situation similar to mine but I can't see one so I am starting a new one.
I have Four (4) Apple TVs in the house and a large library of movies, TV shows and personal movies loaded into iTunes on a Window 7 64 bit system with an Intel i7 processor, 12 GB of memory and 2TB of disk space. Everything seemed to work OK until I got the third Apple TV but that was a year ago and several software upgrades in the past.
My problem is that when all four (4) Apple TVs are plugged into power, even if the ones I am not using are asleep, I have horrible buffering delays when watching vidoes from iTunes on the Windows PC. I do not have any trouble streaming video from Netflix or the iTunes store directly. When the Apple TV stops to fill buffers it seems to lock up trying and never comes back (I have waited up to 30 minutes). However, if I exit out of the movie as soon as the buffering issue starts, and go back into the video where I left off - it starts playing again within 3 seconds and will carry on for another random period of time in the range of 2 minutes to 10 minutes.
Before anyone starts responding with the basic stock suggestions, I am a retired IT guy who has put a lot of time and technical effort into trying to find the root cause of this problem. I am very familiar with networking, Windows 7, firewalls, etc.
The work around is that when I want to watch videos from iTunes on my Windows PC I have to unplug the other three Apple TVs, restart my router and reboot my Windows PC. These three steps together work consistently but omitting any one step may or may not improve the situation. This means that I can't just decide to watch a video from iTunes without 10 minutes of advance prep work - and watching two different videos on two different Apple TVs at the same time only works about 30% of the time.
Here is some more background information:
I have two (2) iPhones, one (1) iPad, another Windows 7 64 bit PC, a MacBook Air, and stand alone Internet radio on my network. The problem persists even when all the other devices have been powered off.
All devices, including the Apple TVs, are running the most current version of software and have ALL patches installed.
I have upgraded my router (twice) and now have an ASUS RT-N56U dual band router with the Windows PCs both cable connected and the Apple TVs and all the other stuff running wireless.
I have used netstumbler to detect other networks and have tried various different channels on the router. I am in a low density area and only see two other neighbours with wireless networks.
I have a 20 MB Internet service connection via cable modem and have no problems watching videos on the Apple TVs from the Internet
I have relocated the router away from any other elecrical equipment (Apple TVs all show a full strength signal)
I have tried disabling my MacAfee Security Center virus and personal firewall software (the problem persists), then removing it entirely (the problem persists), then reinstalling only the virus protection component and enabling Windows Firewall (the problem persists).
I have removed all software from the Windows computer that brand name commercial software - I use Microsoft Office 2010 and Google Chrome as my browser (the problem persists).
Important - I have moved the complete iTunes library to a 2TB USB hard drive and run iTunes on my MacBook Air with the Windows PCs turned off (the problem persists).
There is one issue that seems relevant, but might just be a bug in the router management interface. I have set up reserved DHCP addresses for the Apple TVs and the computers to make it easier to identify devices when I am troubleshooting. The DHCP log shows the correct IP addresses being assigned to the correct MAC addresses but the network map screen frequently displays two or more Apple TVs with duplicate MAC addresses. It only happens with the Apple TVs and has never happened with anything else. This is what gave me the idea to turn off all Apple TVs except the one I want to watch and reset the router to clear the other addresses - which seems to be the only consistent way to watch an iTunes video without buffering problems.
Any ideas would be greatly appreciated. I have invested a lot of time and money in Apple technologies and setting up this home video strategy. It's very frustrating that it doesn't work reliably.
Thanks
Bob T

I too am having this issue were two of my Apple TVs are showing duplicate MAC Addresses. I have varrified this by looking at the arp -a cache on multiple machines. I believe this is a major bug in the Apple TV software. Can we please get a fix.

Apple TV buffering issues with iPhone 4s and iPad 2

Hi all,
I just got me an Apple TV 2nd gen (yeah, I know, ordered 2 days before the presentation of the new one). So far so good, the device is up and running, connects just fine to my Airport Express router and all.
However, if I try to stream a video from my iPad (2) or my iPhone (4S), the results are quite horriffic. The iPad videos would buffer for a very long time before they start and then quite fast after that the buffering problems restart. It's pretty impossible to play a video fluently of more than 20 seconds. If I'd try from my iPhone it's even worse with videos being 1080p, the thing just never plays, eventually the preloading process stops on the mirroring mode is cut.
I have to point out, all my devices are in the same room (WiFi) so the signal is the best it can be.
This is honestly quite surprising AND disappointing to be honest, given I bought the device mostly for that, so I can stream videos from my phone and pad.
Tell me, am I doing something wrong, or the video streaming over those devices is just a marketing gimmick with nothing real behind it?
Would it matter if I change my router from Airport express to Airport extreme?
Thanks!

I have the same issue with ATV3 and iPhone 4S. Everything works properly, no buffering issues when watching netflix, vimeo, youtube BUT when I try mirroring even a small 15sec iPhone movie it stutters and buffers and results to a choppy playback..same with larger mp4 files such as 1-1.5GB, buffers forever and never plays, I just re-encoded the same movie to 700MB and plays perfectly..
Why Apple, why?..so close..I can accept the bigger movie files issue, but not being able to playback properly an iPhone movie is funny..I recorded a movie with lower bitrate through Filmic Pro (Economy mode, up to 16Mbps)
and plays properly.
Is there an upcoming software update going to solve the problem or is it hardware related and therefore not fixable.
Please don't reply with a network related answer, by 2012 we know how to set up our networks and everything else runs flawlessly.
I'll apreciate a fast answer, we love Apple, but if it can't play an iphone movie (or a high quality movie from iTunes) it's just not up to my standards.
Thanks again.
JP

Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of t

Dear all,
Sub: Tax Combinatiom. Tax rate, tax Amount in the print lay out design of the A/R Invoice
I have to Create a Print Lay out design of the A/R invoice for the Indain standrad please provide me some solutions for the following problems to locate the Tax combinations,Tax rate and the Tax amount in the PLD A/R Invoice ,
PACAKGE SAP B1 2005B
Need a standrad solution as per the requriment
Eg: Row Level
Tax Code created is BED+VAT
Tax combination details is
Name of Tax type   Rate
Excise                     16%
Ecess                    2%
Hcess                    1%
VAT                       4%
Row No     Item Qty   UnitPrice Tax code Total(LC)    Tax Amount
1             X      10     10000      BED+VAT   100000      21139
                                         (Excise =16000,Ecess=320, Hcess=160, VAT=4659)
2              Y      5      20000      BED+VAT    200000       42278
                                        (Excise =32000,Ecess=640, Hcess=320, VAT=9318)
In Print Lay out Design Requried is the deatils of Tax code combination , Rate and the Tax Amount in the followig way
Excise    16%   =48000
Ecess     2%    =960
Hcess     1%    =480
VAT       4%    =13977
Please send the feedback as early as possible urgently requried
for the further details send the feedback
Reagrds
Mr.Chitrasen

Hi experts,
       Pls anybody have an answer to my question, i'll be very thankfull to u,
                 I wanted to display the Tax Break ups in Invoice say,
ECess            25
Vat                 56
Excise duty    32
I've tried a lot with many of the SAP Forum thread but the results is not satisfactory..am using SAP Business One 2007 b
pls anybody who can guide me with step by step PLD creation for this problem.
I done the below steps in PLD
In Repetitive area 1
Field_1: Table-> OSTA
              Column-> Type
Field_2 : Table-> OSTA
              Column -> Code
Field_3: Table-> OSTA
              Column-> Rate
Field_4: Table-> OSTA
              Column-> Name
Field_5: Table-> A/R Invoice Tax amount per document
                Column-> Tax amount
Field_6 : Table-> A/R Invoice Tax amount per document
                Column-> Base amount
Field_7 : Formula -> Field_6 * Field_8
Field_8 :   Formula-> Field_1==1
      NOW I SORTED REPETITVE AREA 1 WITH 'SALES TAX AUTHORITIES;cODE' AND TICKED THE CHECK BOX 'SUMMARY'
    AND MADE THIS REPETITIVE AREA INVISIBLE.
IN Repetive area footer
F_01 :    Formula->   Field_4
F_02 :    Formula->   Concat(Round(F_rate,0), '%')
F_03 :    Formula->   Round(ColSum("F_tax_amount"),2)
I grouped the Repetitive area footer as Group 1
                            here i get the result but the Tax Rows are repeating and Tax amount varies for VAT for each rows
pls help me guys...
               Thanks in advance,
               Dinesh
Edited by: Dinesh S on Dec 23, 2011 1:28 PM

Photo album & gallery views mess up with links and lay out

Hi,
Am having a weird problem in album/gallery function.
I added links on the album page, but after viewing the gallery, reverting back to the album the link stopped working (main problem), and in the gallery page the link does not appear in cases or is lay-outed very close and then more below.
Obviously I tried already by duplicating my 2 pages that work quite well and remake the other pages, but the problem persists.
Anybody can help ?
Following is a description:
http://web.mac.com/drieke.tom/Caravanserai/Gilles_works.html
Album view is fine, link at the bottom works.
Click through to gallery of photos: link at the bottom of page is gone.
Going "Back to Album": link at bottom does not work
On following page s. th similar happens
http://web.mac.com/drieke.tom/Caravanserai/collaboration_works.html
Click through to gallery of photos: link at the bottom of page does work, but is now much lower on the page.
Going "Back to Album": link at bottom does not work
In my other similar pages it works,
though there are some minor gliches as well:
1/
http://web.mac.com/drieke.tom/Caravanserai/Tom_works.html
You click a photo in the album and it shows the enlargened photo with tumbnails. Though my link at the bottom is very close to the photo.
Browse through the photos and when you do "Back to Album", it goes back to the album at once, and with my link at the bottom, it reverts to the main page: "Exhibition"
2/
http://web.mac.com/drieke.tom/Caravanserai/Gilles_press.html
In photo gallery mode, link at bottom is there and works, but very close to photo title.
Going "Back to Album": link at bottom does work !!
WHAT GOES WRONG ?
ANYBODY CAN HELP ?
Thanks
Tom

Tom:
Have you tried doing a "Publish All to .Mac" or publishing to a folder on the desktop and seeing it things work there. Often the Publish All will fixe issues I'm having.
OT

Recomendation report preview give a bad lay out

Hello experts,
When I m running the payment wizard, once I m arrived to the recommendation report, I click on preview and the lay out given by this preview is not good at all. This issue happen only when the payment run is not executed, if it is executed the preview is correct.
I need this preview to select my payments before to execute them.
Thanks for your help.
Best regards
Sébastien TABORE

Hi,
Please check Note No. : 1634452 & 1603368 and see whether the issue mentioned by you is similar to the scenario in the Note.
The same is fixed in 8.81 PL09.
Kind Regards,
Jitin
SAP Business One Forum Team

Join columns of outer join with table have no uniqueness cons

Hi! I'm getting noizy error in alert log from time to time:
Join columns of outer join with table <table_name> have no uniqueness constraints
I've collected all the queries (v$sql, all_source) with montioned table, but non of them produces that error if executed.
Any hints how to reproduce this error or where else to search that buggy sql join?
Edited by: user545083 on 25.10.2010 6:21

Hi
I think this error is output via an materialized view refresh - check for mviews against the given table which fulfil the issue given in the error text.
Thanks
Paul

What is the best way to lay out color-coded Excel data in InDesign?

I’ve been away from layout for some time. I now need to lay out color-coded Excel data (3 columns, 200 rows) in InDesign 5.5. The data will need to be in alpha order and each row will be color coded, with a color key at the top of the page. What is the best way to lay this out? Should I use the table tool and create a new style for each color that I need to use?
Thanks for your help.

I think this will work in CS3.
Start off by inserting Styles of WEEK, Mon to Friday (as per left)
Set the Week No. to Bullets and Numbering and insert as per screen shot
Do the same for Days Monday through to Sunday
Also set up Monday style NEXT STYLE to be Tuesday
When you get to Sunday - loop the Styles back to WEEK style.
Then as per first screen shot you just have to insert RETURNS all the way down to initiate the style.

Problem using a lay-out break

When I want to have a selection of text to have for example two columns I use two lay-out breaks: one before the selection and one after the selection. That works fine, but...
Then the last line of a column doesn't show all the letters completely (the underpart of the g is cut off).
What to do?
Check the lines under numbers 4 and 8.
Message was edited by: GEN79
Message was edited by: GEN79

Hello
problem solved.
Here is a screenshot of the original doc in which I just replaced the original font by Myriad.
This time, the oddity is huge.
I entered Inspector > Text > Text
and discovered that line spacing was set to "exactly 15"
I replaced the setting by
"exactly 13"
and the behavior is OK.
It's OK too if I apply
single line spacing.
So, we know how to get rid of the problem.
I wait a few days to see if some one is able to give a the theorical explanation.
If I get none, I will post a report to Apple's Bugs Hunters.
Yvan KOENIG (from FRANCE dimanche 14 juin 2009 21:15:19)

Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

Hi ,
This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
There are many stuff in program which will hamper your performance.
I will list down a few
1. SELECT *
FROM konp
INTO CORRESPONDING FIELDS OF TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh
in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
<b>SELECT *
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.</b>
in this your internal table contains only 2 fields
<b>mblnr LIKE mkpf-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
Please try to make chanegs to the prorgam and see if it works.
In case you have more queries , please do revert back.
Regards
Arun
*Reward points if replay is helpful

Handling multiple cursors with column of date datatype issue reg

Dear all,
i am using three cursors in one pl/sql block each of this three cursor will fetch data based on column of date data type.i believe due to each condition relate to same table,contradiction may arise i.e
1> when code will execute , cursor c1 will do the job perfectly but c2 & c3 here may not be able to solve the purpose since the job has already been done by cursor c1 which i am not sure.my doubts i need all cursor to work based on each condition.
any suggestion from your side could sort out this issues.
Thanks n regards
Laxman
begin
for c1 in(select reqid from request where lastmoddate<sysdate - 8/24 and statuscode=1 and assigned_personid is not null)loop
update srequest set status=open where reqid=c1.reqid;
commit;
end loop;
for c2 in(select reqid from request where lastmoddate<sysdate - 1 and statuscode=1 and assigned_personid is null)loop
update srequest set status=open where reqid=c2.reqid;
commit;
end loop;
for c3 in(select reqid from request where lastmoddate<sysdate - 14 and statuscode=1 and assigned_personid is null)loop
update srequest set status=open where reqid=c3.reqid;
commit;
end loop;

If you look, your third cursor has already been included in your second cursor (sysdate - 14 < sysdate - 1), so there's only two conditions that you need to run.
You're also doing row-by-row aka slow-by-slow processing. It would be much, much better (*) if you converted this to one SQL statement - I've rewritten it to be a MERGE statement:
merge into srequest sreq
using (select reqid
       from   request
       where statuscode = 1
       and    ((lastmoddate < sysdate - 8/24
                and assigned_person_id is not null)
               or
               (last_moddate < sysdate - 1
                and assigned_person_id is null))) req
on (sreq.reqid = req.reqid)
when matched then
update
    set status = 'OPEN';(*) more performant, easier to read, debug and maintain.

ITunes Radio Restarts My iPhone and Has Buffering Issues

Does anyone else have the problem of having their iPhone restart randomly when trying to play a station on iTunes Radio? Also, does iTunes Radio have buffering issues while streaming, cutting in and out when trying to play a song? Lastly, when I try to play a song from my locally-stored library, it occasionally takes a few seconds to start playing a song; is this normal or is it another bug that needs to be squashed by Apple in the upcoming iOS 7.1 update?

I have noticed an issue with the restart when using stations I created. It typically happens after pausing one of the created stations, leaving the phone idle, and coming back to the phone and turning the station back on. That will usually cause a quick restart.
iPhone 5s iOS 7.0.3

UWL Columns Lay Out - Buffering Issue

Similar Messages

Maybe you are looking for