V30L2 and Win98 - anyone using Win98?

G'Day Again
Anyone using Forte on Win98 Clients?
Any problems noticed on the PCs?
The clients hang, wont shut down clean on a daily basis when using Forte
v30G2 on Windows 98 platform.
This behaviour appears to be much exaggerated when using M/S Outlook 98.
Usually Forte (v30G2) will work just fine - but switching to explorer
(attempting to open a word or excel doco say) then tends to freeze up the
explorer.
Anyone have any experience with Forte on 98 clients?
Especially any good experience with v30L2?
TIA Again,
/[:-)irK
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

We have been running our application on Win 98 ( 30J1) for about a month
now, with all these applications you have mentioned ( We use Outlook 97). We
have not had such a problem.
THanks
Venkat J Kodumudi
PriceWaterhouseCoopers LLP
Internet: [email protected]
Internet2: [email protected]
-----Original Message-----
From: [email protected]
[SMTP:[email protected]]
Sent: Tuesday, June 15, 1999 2:43 AM
To: Venkat Kodumudi
Subject: v30L2 and Win98 - anyone using Win98?
To: 'Soapbox Forte Users' <[email protected]>
cc:
From: "Haben, Dirk" <[email protected]> @ INTL
Date: 06/15/99 06:26:48 AM GMT
Subject: v30L2 and Win98 - anyone using Win98?
G'Day Again
Anyone using Forte on Win98 Clients?
Any problems noticed on the PCs?
The clients hang, wont shut down clean on a daily basis when using Forte
v30G2 on Windows 98 platform.
This behaviour appears to be much exaggerated when using M/S Outlook 98.
Usually Forte (v30G2) will work just fine - but switching to explorer
(attempting to open a word or excel doco say) then tends to freeze up the
explorer.
Anyone have any experience with Forte on 98 clients?
Especially any good experience with v30L2?
TIA Again,
/[:-)irK
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Similar Messages

  • Has anyone received advertising for software called "Mackeeper".  Does anyone know if this is supported by Mac, and has anyone used this software?

    Has anyone reveived advertising for software called "Mackeeper".  Does anyone know if this software is supported by Mac, and has anyone used this software?

    Thanks Kappy, I let it do the scan and when it stopped halfway through and demanded registration I stopped and deleted it.  I still have the icon in the menu bar at the top of the screen and don't know how to remove it.  If this is not possible I can live with it.  I am new to Mac and have trouble divorcing myself from my old PC habits!

  • FX5200 and win98

    Can anyone recommend the best drivers for WIN98/fx5200 128 graphics card. My current drivers downloaded form Nvidia only seem to allow certain features to work.
    Also since I installed the card my system has started to freeze occasionally. This also happend when I was using win xp pro and the correct MSI setup cd.
    System Spec:
    Win98,
    P3 500MHz
    PC100 Systemboard/slot 1/ Socket 370
    256mb sdram
    Unknown PSU.
    Thanks.
     Tom.

    Quote
    says that there is not an AGP Device installed. In the BIOS it is set to 4X AGP. Don't know why it can't detect the card.
    Reinstall your motherboard/chipset drivers - specifically, the GART driver - that should take care of that problem.
    Quote
    But, it won't let me choose AGP Traffic Enable or 4X. And does anyone know what SBA Enable means? What the heck is SBA?
    Search for the 'Coolbits' Registry tweak - that should solve that problem.  (or use RivaTuner - http://www.guru3d.com)
    SBA is SideBand Addressing - an AGP feature that theoretically should provide a speed boost - when/if it works.  Most people run into trouble when it's enabled.

  • How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    Hello Arthur,
    Thank you for the reply.
    You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
    The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
    Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and  i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD ,  pen and paper and CDs .
    Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
    I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
    Thanks
    Amanda

  • I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro.  Does anyone know how to do this?

    1. Remove the drives, install them in external enclosures.
    2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

  • HT2242 I am British, live in Spain, and want to use my UK credit card for my iTunes account and use English, but can't find a way to do this. Can anyone help?

    I am British, live in Spain, and want to use my UK credit card for my iTunes account and use English, but can't find a way to do this. Can anyone help?

    under usage-i only have the camera roll, photo library and photostream-they don't show the individual albums withing my libraries-if i delete library-i would delete about 12 albums
    I don't sync pics but was hoping the albums showed up there.  It was a long shot.

  • Can anyone direct me to a good overview of the new features of iOS 6 (I use an iPhone 4S) so I know what I've got and how to use it?  Thanks!

    Can anyone direct me to a good overview of the new features of iOS 6 (I use an iPhone 4S) so I know what I've got and how to use it?  Thanks!

    http://www.apple.com/ios/

  • Ive just upgraded to Mountain lion, I was using Safari and tried to use iCloud tabs. When I open it up there are no tabs there, anyone have any ideas on how to get it working?

    Ive just upgraded to Mountain lion, I was using Safari and tried to use iCloud tabs. When I open it up there are no tabs there, anyone have any ideas on how to get it working?

    Can you check system update? I think I did a system Update 1st, a day before installing OSX Lion and there is a Safari update. If not try logging in iCloud.

  • My iPhone 4s was stolen this weekend and I did the Remote Lock.  What exactly does that do?  Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

    My iPhone 4s was stolen this weekend and I did the Remote Lock.  What exactly does that do?  Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

    The remote lock locks the iphone with a passcode that you set. By remote wiping the device it will simply restore it and clear it of all its data, but by doing this it will prevent you tracking it and communicating with it (e.g. remote locking it) in the future

  • Has anyone experienced, if so found a solution to having electrical shock, tingling, pain and burning in fingers hand and wrist from using the apple mac computers??

    Has anyone experienced electrical schock, tingling, burning and pain in the fingers, hand and wrist while using the apple mac desktop and the apple pro notebook??  If, so have you found a solution??  Never experienced this with any other computers and I have talked with my Doctor as well as a specialist and have had an EMG test for capatunel and nerve damage both test were negative

    I have experienced some mild tingling if I touch the aluminum case on my iMac at the same time that I touch the metal cases on my external hard drives.  They are all connected to the same surge suppressor and are on the same circuit, which is definitely properly grounded.  I can't explain it, and I just make sure not to touch them at the same time.
    I have never had any sensation touching just one of the devices alone.  Is that what you are experiencing?

  • Is there anyone using an iphone 4s, os 5.0.1, in kolkata india on service provided vodafone 3g and the phone working fine?

    Is there anyone using an iphone 4s, os 5.0.1, in kolkata india on service provided vodafone 3g and the phone working fine?

    hi i bought a iphone 4s recently and is having vodafone as service provider. my iphone is not recongising or detecting any 3G signal. Did your problem got solved by any chance?

  • Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi Cereskit
    Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
    Vicki

  • Anyone use hypersonic 2 and logic express 9?

    anyone use hypersonic 2 and logic express 9?
    Message was edited by: Kajun Muzik

    Actually I have found a way for at least the instrument plug ins to be accessed.
    I was able to set up an instance of Sculpture in MS2 and record it in LE using Soundflower.
    Route the audio from MainStage to Logic and record onto an audio track in Logic as follows:
    If not already installed, get SoundFlower. After installing it.
    A) Setup the sound you want in MS2 and audio output to Soundflower (remember to Apply Changes or it does not hold).
    B) In Logic Express set the audio input to Soundflower and create a new audio track for recording. Important: set Soundflower's audio output to however you listen to your audio or you won't hear anything.
    C) Press RECORD and start playing, LE captures Mainstage's sound.
    I have not tried to wire LE's output to MS2 to take advantage of Space Designer. but since this functions, I'm not sure why that couldn't work as well. It is still flipping though a few screens though...might just be easier to get Logic Pro from the App store....

  • Anyone using 1and1? Disappointed in iWeb and MobileMe

    I designed a website for my professional services in iWeb but then learned about its limitations here in the Apple discussions. I'm thinking of using 1and1 and their templates. I want to produce brochure ware about my services with an interactive contact us page (iWeb doesn't have and I'd need to add html code/tweak -- seems like form generation ought to be standard) and to have a blog. Fairly simple -- not selling anything online -- although eventually it'll be nice to have a forum or to have blog commenting capability. I'm also hoping that the web host has some decently designed templates.
    Has anyone used 1and1 as a webhost? Are you using a Mac friendly web host? What your experiences? I've seen Mac friendly web hosting sites. Any recommendations and words of wisdom are welcomed about what to look for and look-out for when using such services.

    What's the point of coming to an iWeb discussion group and asking for information on template based hosting? The whole reason for using iWeb is to allow you the freedom to design as you wish, without having to deal with bland design and restrictive layout. Form generation is standard. iWeb doesn't do it.
    I work with several sites that are using a perl script in a cgi-bin directory to handle custom contact forms. I do the actual form in Dreamweaver (there are many other programs that can do this), and paste the code for the form into an HTML widget on a "Contact" page.
    After setting up the site for a Mac user with iWeb 09, I provide them with the iWeb site file and tell them to have some fun. Just leave the code alone for the contact form itself. You can change everything else on the site including the Contact Page, as long as you don't mess with the contact form code.
    I use Cyberduck to upload the perl script to the cgi-bin directory on a standard linux based hosting site like seanic.net and the user gets to use iWeb to make all of the future updates and new pages when they want.
    Dealing with tech support on a hosting site, that doesn't really know how iWeb (or many other site building programs work), will drive you nuts. You may do better to find someone to assist you with your initial domain setup and original site pages so that you can have fun with the design instead of dealing with all of the other issues.

  • Hi there Hope someone can help me here. I am currently on holidays and my Kids have disabled my iPad so I now have to sync with my computer. I don't have my computer handy and want to use my device over the next few weeks if possible so can anyone help me

    Hi there
    Hope someone can help me here. I am currently on holidays and my
    Kids have disabled my iPad so I now have to sync with my computer.
    I don't have my computer handy and want to use my device over the next few weeks
    if possible so can anyone help me please
    Thanks
    Darren
    iPad 2 Wi-Fi + 3G, iOS 6.0.2

    You need a computer.
    Suggest you goto the nearest Apple Reseller and ask them to help you.

Maybe you are looking for

  • How to paint a Custom Cell  while you are editing on adjacent Cell in JTabl

    Hi All, I have two Columns in my Custom Table . Both Two Columns are Custom Cell Editors/Renderers. I have made UI such that Column1 is Label , Column 2 is TextBox / Combo/ UI Input any My Custom Table View when i edit some value against Max Conn. it

  • Activity won't work in IE 6

    Hi everyone, I hope someone can help as I've been struggling with this for about 4 months. We have an online course that includes interactive exercises. One of the exercises has two parts, the students first click on an arrow and the Shockwave player

  • Is it possible to change the brown leather look in 10.7 to something else?

    Is it possible to change the brown leather look in 10.7 to something else?

  • Hyperion Planner - Cell Document Links

    Hi I am trying to add a document link to a cell within a web form in Hyperion Planner. The document I wish to link to is simply on a shared server / local drive. Therefore the file path looks like: T:\FINANCE\My Document.doc However, an error message

  • Cannot Download Oracle 9i client

    I get the 404 error when I click on any of the zip file links for the Oracle 9i client downloads. Is there a problem with the download availability? Thanks