Adding a column at item level while creating PO using ME21N

Hi,
My requirement is to add new column in Item overview of PO at the time of creation. Same should be displayed in ME22N and ME23N.
I tried doing same using BADI ME_PROCESS_PO_CUST using interface PROCESS_ITEM after adding field QSSYS in EKPO table.
I have also tried exit MM06E005  / EXIT_SAPMM06E_013.
Kindly let me know steps.
Thanks & Regards,
Vidhi

Hi Vidhi,
I think you can not add new column in standard one. Create a custom tab at item level and use that.
[Me21n Tab|http://wiki.sdn.sap.com/wiki/display/ABAP/DetailedexplanationaboutBADIandthewaystofindtheBADIwithanexample%28ME23n+transaction%29]
Regards,
Madhu.

Similar Messages

  • Making a header field as non editable while creating PO using ME21n

    Hi Friends,
    Could any one tell me the BADI or screen exit to make a header field (for eg: EKGRP - Purchasing Group) as non editable after giving default value to it?
    Thanks in advance,
    Ram

    Hi Ram,
    goto se80 t-code and give 'ME' package, and now see the enhancements available.
    You l get a relavent one, if you go through all those.
    Hope this helps
    Regards,
    Sujatha

  • "retail" tab not showing while creating PO thru' ME21N in IS-Retail

    "retail" tab not showing in item level while creating PO thru' ME21N in IS-Retail

    Hi,
    Go to SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level - Here for the field selection key "ME21N", under field selection group "Administrative data, item", mark following fields as optional ;
    Prior vendor
    Season
    Reason for ordering
    Revision level
    And then check.

  • Need help to read the item details while creating the Opportunity in SAP CR

    Hi,
    I need to read the values entered at item level while creating a new opportunity in SAP CRM 5.0.
    Is there any function modle to do that ? I need to read the custom fields (developed by EEWB)
    and sum  them up and populate at the header level.
    As the data is not saved yet, I cannot read from database in the present scenario.
    Thanks and regards

    Hi,
      U can use CRM_ORDER_READ.
    1) Pass the values for the ITEM guid which u want to read.
    2) ignore the other header guid and object id because it is for whole contract
    3) if u had custmize any table it will be available in the internal table returned by the function module.
    4) u have to identify which internal table will contain the field since many internal table are available with similar meaning.
    4) CRM_ORDER_ORDER is heavy function module it reads entire contract hence u need to specify which internal table u have to read any only those values will be read. for that u have to fill in <b>it_requested_objects</b>
    fill requested ogject with below statement
    INSERT gc_object_name-orderadm_h  INTO TABLE lit_import_tab.
    gc_object_name is constant structure u have to include
    *-Standard Include
      INCLUDE crm_object_names_con.
    Mark helpfull answers
    Regards
    Manoj

  • How to customize Category and Category items list while creating New Model

    Hi,
    what the most convenient way to customize the Category and Category items list while creating New Model?
    This is standard:
    Now, what we want to achieve, is to customize this menu, to:
    1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    2. In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available. Additionally, it should behave like a hierarchy ... meaning you can create the second diagram, only as child (related diagram) of the first diagram etc.
    I know, excluding the particular diagrams/diagram elements can be configured using the right/profile settings, but how to:
    1. Customize the standard New Model menu window
    2. Create copies of City Planning Diagrams with different set-ups
    3. Set the relationship between diagrams
    Is such a configuration change possible?
    Thanks a lot for your help!
    Regards,
    Rafal

    Now, what we want to achieve, is to customize this menu, to:
    Question #1. Display in the Category window only f.e. two categories:
    - EA Diagrams
    - BPM Diagrams
    Click on Tools => General Options=> Model Creation
    Click on Properties => at right of Default category set
    Note : Model template does not work as Category. We can't set. An enchancement request has been open to SAP
    In the following example I defined a new default (MyNewDefault.mcc). As you can see only BPMN models are available.
    To create a new category set with BPMN choice
    a) Copy default.mcc in MyNewDefault.mcc file.
        Go to Tools=>General Options=>Model Creation : Select your new category
        Go to Tools=>General Options=>Model Creation : Edit properties and remove all things you does not want keep
    or
    b) Go to Tools=>General options=>Model Creation : Edit properties and click on Save as button and specify the file name "MyNewDefault".
        Quit the window.
        Select you new category : Go to Tools=>General Options=>Model Creation : "MyNewDefault"
        Edit properties and remove all things you does not want keep.
        Save you new category
    Question #2. How to define copies/replicas of existing diagrams
         Wrote an extension
    Question #3. How to make sure, particular diagrams can be used (created) only on predefined "levels" and how to set the parent-child relationship, so that PD enforced it directly when creating a new diagram.
         Specify yours conditons in your extension attached to your model
         Example : When the user want create a child diagram :  You can display a list of Parent Diagrams to select from.
         You can set in your extension by VBScript parent-child relationship
    Question #4 In the EA Diagrams, we want to have f.e. four copies of City Planning diagram, each of them should have different elements available, f.e. in the first copy, only Architecture Areas shall be made available, in the second one Architecture Areas and Business Functions, in the third on f.e. only Business Functions shall be made available.
    If I understand well your question. I suggest to take a look in
    Repository=>Administration=>Objects Permission Profile
    You can specify objects to show, mask, deactivate at model level.
    You can specifiy your own metadata.
    But I'm not sure you can mask, deactivate functions following diagram selection. It seem to specific.
    Message was edited by: Benoit Le Nabec

  • Scrollbar appearing while creating pdf using AlivePDF

    Hi,
    I am facing a problem while creating pdf using AlivePDF.
    I have a VBox on which I am adding multiple pages. If the content overflows it shows scrollbar. All this is working fine.
    [PHP]
    <mx:VBox x="0" y="80" width="705" height="560" id="content"></mx:VBox>
    [/PHP]
    When I create the pdf using the following code it shows scrollbar in  generated pdf (attached screenshot) while I want all the content without  scrollbar
    [PHP]
    var pg:DisplayObject;
    pg = content.getChildAt(i);
    var pdf:PDF;
    pdf = new PDF (Orientation.PORTRAIT, Unit.POINT, Size.LETTER);
    pdf.setDisplayMode(Display.FULL_WIDTH);
    pdf.addPage();
    pdf.addImage(pg, new Resize(Mode.FIT_TO_PAGE, Position.CENTERED ),0, 0, 0, 0, 0, 1,true,'PNG',100);
    [/PHP]
    Please suggest what changes should I make to fix this.

    If the report didn't change, then perhaps the data did. Check
    to make sure the data being supplied to the report is as expected.
    I have run into mysterious errors where an expected value was of
    the wrong type or a required value was now blank. It is also
    possible to have existing logical errors in an iif() or other
    dynamic evaluation expression that was not previously examined;
    until now. So, is there any unexpected or exceptional data the
    report cannot handle?

  • Problem while creating assets using BAPI

    Use table enhancement BAPI_TE_ANLU
    Diagnosis :The BAPIs for creating and changing assets currently support only those customer enhancements that relate to the user fields created using SAP enhancement AIST0002.
    Can anybody give the appropriate solution why this error is coming while creating assets using BAPI.

    Looks like you are trying to transfer custom fields into the asset master data that were not added following the steps in enhancement AIST0002.
    Using EXTENSIONIN parameter, you can transfer user fields from the asset master record. However, it is not possible to transfer fields that are updated in user-defined tables. Only user fields that were defined using SAP enhancement AIST0002 and are automatically updated in table ANLU can be udpated in this way. This means you have to use table extension BAPI_TE_ANLU.
    Enhancement AIST0002 contains function module EXIT_SAPL1022_001 as a component in which user fields can be implemented.
    The documentation ( BAPIPAREX) of the structure that forms the basis for this parameter contains additional information about using this parameter.
    Please check how table ANLU has been enhanced and also go through the documentation of enhancement AIST0002.
    Regards,
    Shyam

  • Error while creating stock using tcode: MB1C

    Error while creating stock using tcode: MB1C
    The Error is: Check table T004F:entry G006 does not exist

    Hi ,
    Please check the FSV (field status variant) for your company code in OBY6 .
    then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
    if not please maintain it.
    Thanks & Regards
    Anshu

  • Getting error while creating subsite using custom template in sharepoint2013

    Hi,
    I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
    Please suggest me on this.
    Thanks in advance.

    You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
    on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
    Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Entity Attributes are not populating while creating EO using EO wizard.

    Hi,
    I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
    I am facing problem while creating EO using EO wizard.
    In Entity Object Editor Entity Attributes are not populating while creating EO.
    Please help me resolve this issue.
    Thanks & Regards,
    Sagarika

    Please ensure you click on Tables and Synonyms check box and select proper schema.
    Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
    Thanks
    AJ

  • Problem creating basic views while creating materials using idocs?

    hello,
    I am facing an issue while creating materials using idocs. The problem is that the basic view does not get created whereas other views are present. The function module used is idoc_input_matma01 and the basic idoc type is MATMAS03.
    Looking for help. Thank you

    Hi Madhu,
    Actually i recieve an idoc from PI containing data required for cretion of the material via an idoc. This idoc is then processed to create the required material.
    The material gets created with appropiate data in various tables(mara, makt) but when we view material in mm03 we cant see the basic data views.

  • Steps to create STO using ME21N transaction

    Hi,
    Can anyone give me the steps to follow to create STO using ME21N transaction. When i try to create it, i am getting the error message : Not possible to determine shipping data for material 3863...
    Please guide me...
    Thanks in Advance,
    Phani Kumar. S

    I got the same error it was because in customizing you specify plant master data that is linked to a customer master record.  You need to make sure the customer master data is set up from a sales perspective.  E.g. customer must be extended to appropriate sales org. and division.  Same with the material master but the customer master was my problem.  This is configuration and you will have to move it through the transport queue so if you have a problem in your production system it will require a transport.
    Jeremy McGurk

  • How to avoid XVBPA line item values while creating sales order

    Hi Friends
    I am creating Sales order using function module IDOC_INPUT_ORDERS, for that I am passing partner details through segment E1EDKA1.If I pass the same partner details(Partner number, name1,name4,city,postel code) which is same like customer master,
    I can able to book the order and entries are coming only one time in VBPA table(Header Item level).But if I change any value for the particular partner in the Input(For example Name4, there is no value in customer master but I added through program).Now its creating an order but its showing the entered partner informations in header level.When I checked the same in line item level, its not picking the values from header, its picking the values from customer master for that particular partner.
    So this line item also coming in VBPA table, because its different from header data.
    Anyone guide me, how to avoid this problem while booking order through program.
    Thanks
    Gowrishankar

    I am updating Ship-To-Party value in segment E1EDKA1 and calling IDOC_INPUT_ORDERS function module to create the sales order.
    In this case for the particular partner there is no NAME4 value in KNA1, I am passing some value through this segment E1EDKA1.
    So its creating an order with this new addresses , so its generating new ADRNR in VBPA header level.Thats fine.But the same time
    its not copying the same value from header to line item.
    In Line item level again its picking the address details from KNA1 for the particular partner number.So its showing Blank value in NAME4 field of line items.Its creating and spllitting issue, while creating delivery.
    Thanks
    Gowrishankar

  • Addition of a inputfield as column to item level table in shopping cart

    Dear Experts
    i added a new inputfield to item level table as columen of Shopping cart and binded a variable from context. that column is displayed in the table but it is displayed in Disabled mode im not able to give input to the column(as it is a inputfield).
    I checked the table column property it is enabled and i aslo configure on the SPRO, nothing is woring for me.
    Please giude me to make the table column enabled so that i can give input..
    Regards
    Arun.K.P

    Hi  Arun ,
    you need to maintain the Meta data entries ,
    Navigate path
    spro->sap implementation guide->Supplier Relationship Management->SRM server->cross application basic settings-> extension and field control->create table extension and supply with data->control table extension and there field action-> configure control of fields of table extension .
    Thanks & Regards
    Pradeep Kumar Dondeti

  • Lock at a Customer level - while creating a dispute or working on the ColWL

    Please, provide workarounds for:
    SAP creates a lock at a Customer level while doing the following activities
    u2022     Clearing an item
    u2022     Creation of a Dispute case
    u2022     Working on Collections worklist for a particular customer
    As a result of the lock at the customer level, no other user can work on the same customer at the same time.
    Many thanks,
    Mario.

    Hi Mario,
    This is how system is supposed to work, so that only one user can work at a time on a particular customer. Without such a control, things could go wrong. Eg. You might be making a payment to the customer invoice, simulataneously other user could be trying to clear the same invoice using some credit memo.
    So there is not workaround.
    Thanks
    Krishna

Maybe you are looking for