Va01 upload using call transaction,item details r overwrite ,how to solve

hi experts
   i here attached the coding what i did,while page down item details r over overwrite, how to sole ,give me the suggestions
INCLUDE BDCRECX1.
PARAMETERS: DATASET(132) LOWER CASE.
DATA: BEGIN OF RECORD_HEAD,
        VBELN(10),
data element: AUART
        AUART(004),
data element: VKORG
        VKORG(004),
data element: VTWEG
        VTWEG(002),
data element: SPART
        SPART(002),
DATA ELEMENT: KUNAG
        KUNNR(010),
data element: KUNWE
        KUNNR_007(010),
data element: BSTKD
        BSTKD(035),
    END OF RECORD_HEAD.
DATA: BEGIN OF RECORD_ITEM,
data element: VBELN
        VBELN(10),
data element: MATNR
        MABNR(018),
data element: KWMENG
        KWMENG(019),
      END OF RECORD_ITEM.
End generated data section ***
DATA: IT_SO_HEAD LIKE TABLE OF RECORD_HEAD,
      IT_SO_ITEM LIKE TABLE OF RECORD_ITEM,
      FLAG.
data: counter type num value '1'.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = 'C:\USERS\SANGEETHA\DESKTOP\SO_HEADER.TXT'
      FILETYPE            = 'ASC'
      HAS_FIELD_SEPARATOR = 'X'
    TABLES
      DATA_TAB            = IT_SO_HEAD.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = 'C:\USERS\SANGEETHA\DESKTOP\SO_ITEM.txt'
      FILETYPE            = 'ASC'
      HAS_FIELD_SEPARATOR = 'X'
    TABLES
      DATA_TAB            = IT_SO_ITEM.
LOOP AT IT_SO_HEAD INTO RECORD_HEAD.
    AT NEW VBELN.
      FLAG = 'X'.
    ENDAT.
    PERFORM BDC_DYNPRO      USING 'SAPMV45A' '0101'.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'VBAK-AUART'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM BDC_FIELD       USING 'VBAK-AUART'
                                  RECORD_HEAD-AUART.
    PERFORM BDC_FIELD       USING 'VBAK-VKORG'
                                  RECORD_HEAD-VKORG.
    PERFORM BDC_FIELD       USING 'VBAK-VTWEG'
                                  RECORD_HEAD-VTWEG.
    PERFORM BDC_FIELD       USING 'VBAK-SPART'
                                  RECORD_HEAD-SPART.
    PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
    PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                  '/00'.           " Enter
    PERFORM BDC_FIELD       USING 'KUAGV-KUNNR'
                                  RECORD_HEAD-KUNNR.
    PERFORM BDC_FIELD       USING 'KUWEV-KUNNR'
                                  RECORD_HEAD-KUNNR_007.
    PERFORM BDC_FIELD       USING 'VBKD-BSTKD'
                                  RECORD_HEAD-BSTKD.
    PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'RV45A-MABNR(01)'.
    LOOP AT IT_SO_ITEM INTO RECORD_ITEM WHERE VBELN = RECORD_HEAD-VBELN.
      IF FLAG = 'X'.
        PERFORM BDC_FIELD       USING 'RV45A-MABNR(01)'
                                      RECORD_ITEM-MABNR.
        PERFORM BDC_FIELD       USING 'RV45A-KWMENG(01)'
                                      RECORD_ITEM-KWMENG.
       PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
       PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                             '=/00'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                     'RV45A-MABNR(02)'.
        CLEAR FLAG.
      ELSE.
        PERFORM BDC_FIELD       USING 'RV45A-MABNR(02)'
                                      RECORD_ITEM-MABNR.
        PERFORM BDC_FIELD       USING 'RV45A-KWMENG(02)'
                                      RECORD_ITEM-KWMENG.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'RV45A-KWMENG(02)'.
        PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
        PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                              '=p++'.
        PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                      'RV45A-MABNR(02)'.
           ENDIF.
    ENDLOOP.
      PERFORM BDC_DYNPRO      USING 'SAPMV45A' '4001'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '=SICH'.
     data : l_option like ctu_params.
             l_option-dismode = CTUMODE.
             l_option-updmode = CUPDATE.
             l_option-defsize = 'X'.
      CALL TRANSACTION 'VA01' USING BDCDATA
                              options from l_option
                              MESSAGES INTO MESSTAB.
      CLEAR: BDCDATA,BDCDATA[].
ENDLOOP.

John - Its best to use BAPI_SALESDOCU_CREATEFROMDATA1.
But if you are still going to do a BDC, Do not use the pagedown for new line items. Use the "Create Item" icon in the bottom of the screen. This way you can add as many items as you want and the cursor will always be in the second row of the table control.
Please check the code below: Always enter in the 2nd row even for the first item. It should work.
LOOP AT IT_SO_ITEM INTO RECORD_ITEM WHERE VBELN = RECORD_HEAD-VBELN.
PERFORM BDC_FIELD USING 'RV45A-MABNR(02)'
RECORD_ITEM-MABNR.
PERFORM BDC_FIELD USING 'RV45A-KWMENG(02)'
RECORD_ITEM-KWMENG.
PERFORM BDC_DYNPRO USING 'SAPMV45A' '4001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=POAN'.
ENDIF.
ENDLOOP
reward points if helpful

Similar Messages

Doubt in uploading using call transaction method

hi all
i am uploading f-29 in call transaction method .. i have a problem in currency field, the currency field is not picking up it shows a error that input field is longer than screen field .. i have declared currency field as type BSEG-WRBTR(same as screen field ...how to go about
thanks
lokesh

Hi,
When you use the database value directly in your BDC, you will have this issue. It is always advisable to use character fields when doing BDC. so change it to charecter field and try it..
Regards
Sudheer

Error 00-341 RAISE_EXCEPTION when using Call Transaction for VA01 in backgr

Hi,
I am getting this message when I use call transaction to create a sales order using VA01. Following is the statement I have used. Note that when i execute the program online, I am not getting any errors. I could create sales order without any problem. I am getting this exception only when I run in background.
      CALL TRANSACTION 'VA01'
                 USING BDC_TAB
                  MODE 'N'
                UPDATE 'S'
         MESSAGES INTO W_MESS_TAB.
When I captured message tab, I got following messages.
DC006 - Control Framework: Fatal error - GUI cannot be reached
00341 Runtime error RAISE_EXCEPTION has occurred.
Please help me in this regard.
Regards
Kasi

Some times execution of BDC program in back ground is different from the foreground. Some screens may appear in background and raise error while same will not when executed in foreground.
Double click the message in Session log to know more details.
One way is to suppress the screen while executing BDC.
Alternatively I suggest to use BAPI instead.
- Sanjay

Uploading XL file using call Transaction and running in back ground

Hi all,
I am updating the T-code VA01 using call TRansaction method ....
i am uploading the file is XL file for that i m using the FM ALSM_EXCEL_TO_INTERNAL_TABLE.
But if execute my program in the back ground This FM is giving Dump because it can not Execute in Back GRound...
Plz let me know any FM to upload data from Excel file Both from foreground and back ground....
Plz let me know ASAP..
Thanks,
Suresh

HI...,,
When u run any program in Background, it will not have any contacts with the presentation server.... You cannot upload a presentation server file..
But u can use the Application server file...
SO first store this excel file's data in Application server using the transaction CG3Z and then use the Open data set and read dataset to upload the application server file !!!
reward all helpful answers !!
regards,
sai ramesh

While uploading data into the r/3 using call transaction or session method

hi experts
while uploading data into the r/3 using call transaction or session method error occured in the middle of the processing then how these methods behaves it transfers next records or not?

hai
Session method: The records are not added to the database until the session is processed. sy-subrc is not returned. Error logs are created for error records. Updation in database table is always Synchronous.
Call Transaction method: The records are immediately added to the database table. sy-subrc is returned to 0 if successful. Error logs are not created and hence the errors need to be handled explicitly. Updation in database table is either Synchronous or Asynchronous.
While to transfer the data from the through if any errors occurs until the errors are the complete the data is not transfer to the SAP system.
the system compulsory shows the errors. that errors are stored into the error logs (Transaction is SM35).
so the session method should not return any value.
In call transaction method data is directly pass to the SAP system.
So its compulsory return the value.
Because of the call transaction is the function.
A function should return the value mandatory
In session method errors stroed in SYSTEM GENRATED ERROR LOG.
IN CALL TRANSACTION TO CAPTURE THE ERRORS WE SHOULD PERFORM THE FOLLOWING.
FIRST ME MUST DECLARE AN INTERNAL TABLE WITH THE STRUCTURE OF BDCMSGCOLL TABLE.
THEN WHILE WRITING THE CALL TRANSACTION STATEMENT WE SHOULD PUT THE 'E' MODE FOR CAPTURING ALL THE ERRORS.
THEN FINALLY THE CAPTURED ERRORS MUST TO SENT TO THE INTERNAL TABLE WHICH WE DECLARED IN THE BEGINNING WITH BDCMSGCOLL BY USING THE FUNCTION MODULE "FORMAT_MESSAGE"
AND THUS THE ERROR MESSAGES WILL BE SENT TO THE INTERNAL TABLE WHICH WE DECLARED AT THE BEGINNING.

BDC using call transaction

Hi ,
This is vijay...
can anyone help me plz
Hi,
Iam uploading data using call transaction.Tcode is ff67.In this TCode we have the begining balance(ssald) and ending balance(esald).The new record we are uploading will take the begining balance as the previous record ending balance, if we give the begining balance wrong then the record does not saved it will show error(the begining balance does not match with the prior ending balance).
while uploading the data using MODE A iam able to get the desired output but by using the MODE N iam not able to get the desired output i,e if there is any error in the begining balance also the record is being saved iam not getting the error message.
Iam attaching the code below..please help me
report Z_BRS_BDC no standard page heading line-size 255.
        INTERNAL TABLES DECLARATIONS
DATA : BEGIN OF bdcdata OCCURS 0.
        INCLUDE STRUCTURE bdcdata.
DATA : END OF bdcdata.
DATA: LV_OUT TYPE STRING.
DATA : iopt LIKE ctu_params.
DATA : wa_rec_err   TYPE i.
DATA : wa_rec_wri TYPE i.
DATA : wa_tot_rec TYPE i.
DATA : amt(16) type c.
DATA : BEGIN OF gu_upload OCCURS 0,
       hbkid LIKE febmka-hbkid,
       hktid LIKE febmka-hktid,
       aznum LIKE febmka-aznum,
       azdat LIKE febmka-azdat,
       ssald LIKE amt,
       esald LIKE amt,
       budtm LIKE febmka-budtm,
       mnam1 LIKE febmka-mnam1,
       jname LIKE febmka-jname,
       vgman LIKE febmka-vgman,
       valut LIKE febep-valut,
       kwbtr(13) TYPE c,
       chect_kf LIKE febmkk-chect_kf,
      END OF gu_upload.
DATA:GU_DOWNLOAD LIKE GU_UPLOAD OCCURS 0 WITH HEADER LINE.
kishi*********************************
DATA: BEGIN OF itab OCCURS 0,
     vgman LIKE febmka-vgman,
     valut LIKE febep-valut,
     kwbtr(13) TYPE c,
     chect_kf LIKE febmkk-chect_kf,
     END OF itab.
kishi)(_()00-8-09
DATA: BEGIN OF messtab OCCURS 0.
        INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
DATA: BEGIN OF messtab1 OCCURS 0.
        INCLUDE STRUCTURE messtab.
DATA: END OF messtab1.
DATA : BEGIN OF int_count OCCURS 0.
        INCLUDE STRUCTURE alsmex_tabline.
DATA : END OF int_count.
DATA: c_tcode      LIKE sy-tcode              VALUE 'FF67',
      c_upd        LIKE ctu_params-updmode    VALUE 'S',
      c_def_size   LIKE ctu_params-defsize    VALUE 'X'.
*VALUES FOR STARTING COLUMNS AND ROWS IN THE EXCEL SHEET
DATA : c_begcol     TYPE i                     VALUE '1',
      c_begrow     TYPE i                     VALUE '1',
*DATA IS ENDED AT THE 13TH COLUMN IN THE EXCELSHEET
      c_endcol     TYPE i                     VALUE '13',
*LAST ROW IN THE EXCEL SHEET
      c_endrow     TYPE i                     VALUE '65536',
      c_path(3)    TYPE c                     VALUE 'C:\'.
*Field Symbols
FIELD-SYMBOLS: <fs>.
     SELECTION SCREEN PARAMETERS
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS : p_file LIKE rlgrap-filename DEFAULT
'C:\ ',
*This is the path for downloading file
P_FNAME2 LIKE RLGRAP-FILENAME ,
c_mode LIKE ctu_params-dismode DEFAULT 'N'.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*F4 HELP FOR FILE SELECTION
PERFORM validate_input_file.
START-OF-SELECTION.
CLEAR gu_upload.
REFRESH gu_upload.
     UPLOAD THE DATA FROM FLAT FILE TO INTERNAL TABLE
PERFORM file_upload.
iopt-dismode = c_mode.
iopt-updmode = c_upd.
iopt-defsize = c_def_size.
     POPULATE THE DATA THROUGHSCREENS
PERFORM bdc_upload.
END-OF-SELECTION.
*DISPLY THE ERROR RECORDS
PERFORM DISPLAY-DATA.
      FORM file_upload                                              *
FORM file_upload.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_file
            i_begin_col             = c_begcol
            i_begin_row             = c_begrow
            i_end_col               = c_endcol
            i_end_row               = c_endrow
       TABLES
            intern                  = int_count
       EXCEPTIONS
            inconsistent_parameters = 1
            upload_ole              = 2
            OTHERS                  = 3.
LOOP AT int_count.
    ASSIGN COMPONENT int_count-col OF STRUCTURE gu_upload TO <fs>.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    <fs> = int_count-value.
    AT END OF row.
      APPEND gu_upload.
      CLEAR gu_upload.
    ENDAT.
ENDLOOP.
*kishhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
LOOP AT gu_upload.
    itab-vgman = gu_upload-vgman.
    itab-valut = gu_upload-valut.
    itab-kwbtr = gu_upload-kwbtr.
    itab-chect_kf = gu_upload-chect_kf.
    APPEND itab.
ENDLOOP.
*kishiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
ENDFORM.                    "file_upload
*&      Form BDC_UPLOAD
FORM bdc_upload.
LOOP AT gu_upload.
    CLEAR bdcdata.
    REFRESH bdcdata.
*&      POPULATE THE DATA FOR FIRST SCREEN
perform bdc_dynpro      using 'SAPMF40K' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKA-JNAME'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'FEBMKA-BUKRS'
                              'IN14'.
perform bdc_field       using 'FEBMKA-HBKID'
                              gu_upload-hbkid.
perform bdc_field       using 'FEBMKA-HKTID'
                              gu_upload-hktid.
perform bdc_field       using 'FEBMKA-AZNUM'
                              gu_upload-aznum.
perform bdc_field       using 'FEBMKA-AZDAT'
                              gu_upload-azdat.
perform bdc_field       using 'FEBMKA-SSALD'
                              gu_upload-ssald.
perform bdc_field       using 'FEBMKA-ESALD'
                              gu_upload-esald.
perform bdc_field       using 'FEBMKA-BUDTM'
                              gu_upload-budtm.
perform bdc_field       using 'FEBMKA-MNAM1'
                              gu_upload-mnam1.
perform bdc_field       using 'FEBMKA-JNAME'
                              gu_upload-jname.
*&      POPULATE THE DATA FOR SECOND SCREEN
    DATA : fnam(20) TYPE c,
          idx      TYPE c.
    MOVE 1 TO idx.
    LOOP AT itab.
      PERFORM bdc_dynpro      USING 'SAPMF40K' '8000'.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    'FEBMKK-CHECT_KF(03)'.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '/00'.
      CONCATENATE 'FEBMKA-VGMAN(' idx ')' INTO fnam.
      PERFORM bdc_field       USING fnam
                                    itab-vgman.
      CONCATENATE 'FEBEP-VALUT(' idx ')' INTO fnam.
      PERFORM bdc_field       USING fnam itab-valut.
      CONCATENATE 'FEBMKA-KWBTR(' idx ')' INTO fnam.
      PERFORM bdc_field       USING fnam itab-kwbtr.
      CONCATENATE 'FEBMKK-CHECT_KF(' idx ')' INTO fnam.
      PERFORM bdc_field USING fnam itab-chect_kf.
      idx = idx + 1.
    ENDLOOP.
*perform bdc_dynpro      using 'SAPMF40K' '8000'.
*perform bdc_field       using 'BDC_CURSOR'
                             'FEBMKK-CHECT_KF(01)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'FEBMKA-VGMAN(01)'
                             'z001'.
*perform bdc_field       using 'FEBEP-VALUT(01)'
                             '2007/04/26'.
*perform bdc_field       using 'FEBMKA-KWBTR(01)'
                             '          5000-'.
*perform bdc_field       using 'FEBMKK-CHECT_KF(01)'
                             '1122'.
perform bdc_dynpro      using 'SAPMF40K' '8000'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKK-CHECT_KF(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
*&      POPULATE THE DATA FOR FOURTH SCREEN
perform bdc_dynpro      using 'SAPMF40K' '0101'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKA-BUKRS'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BUCH'.
perform bdc_field       using 'FEBMKA-BUKRS'
                              'IN14'.
perform bdc_field       using 'FEBMKA-HBKID'
                              gu_upload-hbkid.
perform bdc_field       using 'FEBMKA-HKTID'
                              gu_upload-hktid.
perform bdc_field       using 'FEBMKA-AZNUM'
                              gu_upload-aznum.
perform bdc_field       using 'FEBMKA-AZDAT'
                              gu_upload-azdat.
perform bdc_field       using 'FEBMKA-SSALD'
                              gu_upload-ssald.
perform bdc_field       using 'FEBMKA-ESALD'
                              gu_upload-esald.
perform bdc_field       using 'FEBMKA-BUDTM'
                              gu_upload-budtm.
perform bdc_field       using 'FEBMKA-MNAM1'
                              gu_upload-mnam1.
perform bdc_field       using 'FEBMKA-JNAME'
                              gu_upload-jname.
*perform bdc_dynpro      using 'SAPMF40K' '0101'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/EENDE'.
*perform bdc_field       using 'BDC_CURSOR'
                             'FEBMKA-BUKRS'.
perform bdc_dynpro      using 'SAPMF40K' '0101'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EABBR'.
perform bdc_field       using 'BDC_CURSOR'
                              'FEBMKA-BUKRS'.
*&      USING THE CALL TRANSACTION
    PERFORM call_transaction.
   CLEAR BDCDATA.                      "<--- Add here
   REFRESH BDCDATA.                 "<--- Add here
ENDLOOP.
ENDFORM.                    " BDC_UPLOAD
*&      Form VALIDATE_INPUT_FILE
FORM validate_input_file.
CALL FUNCTION 'WS_FILENAME_GET'
       EXPORTING
            def_path         = ' c:\ '
            mask             = ',.txt,.*.'
            mode             = 'O'
            title            = 'Upload '
       IMPORTING
            filename         = p_file
       EXCEPTIONS
            inv_winsys       = 1
            no_batch         = 2
            selection_cancel = 3
            selection_error = 4
            OTHERS           = 5.
IF sy-subrc <> 0.
IF sy-subrc <> 0 AND sy-subrc <> 3.
   MESSAGE e100(zm) WITH text-007.
ENDIF.
ENDFORM.                    " VALIDATE_INPUT_FILE
       Start new screen                                              *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "bdc_dynpro
       Insert field                                                  *
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM.                    "bdc_field
*&      Form CALL_TRANSACTION
FORM call_transaction.
DATA: l_index LIKE sy-tabix.
CALL TRANSACTION c_tcode USING bdcdata
                            MODE c_mode
                            MESSAGES INTO messtab.
*POPULATE THE ERROR RECORDS INTO INTERNAL TABLE
IF SY-SUBRC NE 0.
    GU_DOWNLOAD-HBKID = GU_UPLOAD-HBKID.
   GU_DOWNLOAD-HBKID = GU_UPLOAD-HBKID.
    GU_DOWNLOAD-HKTID = GU_UPLOAD-HKTID.
    GU_DOWNLOAD-AZNUM = GU_UPLOAD-AZNUM.
    GU_DOWNLOAD-AZDAT = GU_UPLOAD-AZDAT.
    GU_DOWNLOAD-ESALD = GU_UPLOAD-ESALD.
    GU_DOWNLOAD-SSALD = GU_UPLOAD-SSALD.
    GU_DOWNLOAD-BUDTM = GU_UPLOAD-BUDTM.
    GU_DOWNLOAD-MNAM1 = GU_UPLOAD-MNAM1.
    GU_DOWNLOAD-JNAME = GU_UPLOAD-JNAME.
    GU_DOWNLOAD-VGMAN = GU_UPLOAD-VGMAN.
    GU_DOWNLOAD-VALUT = GU_UPLOAD-VALUT.
    GU_DOWNLOAD-KWBTR = GU_UPLOAD-KWBTR.
    GU_DOWNLOAD-CHECT_KF = GU_UPLOAD-CHECT_KF.
    APPEND GU_DOWNLOAD.
*DISPLAY THE PROGRESS OF PROCESS
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
   PERCENTAGE       = 0
   TEXT             = 'Downloading is in process'.
*DOWNLOADING THE ERROR RECORD
    LV_OUT = P_FNAME2.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME               = LV_OUT
        WRITE_FIELD_SEPARATOR =      'X'
      TABLES
        DATA_TAB                = GU_DOWNLOAD.
ENDIF.
IF NOT messtab[] IS INITIAL.
    PERFORM format_message.
ENDIF.
ENDFORM.                    " CALL_TRANSACTION
*&      Form DISPLAY-DATA
FORM display-data.
SKIP.
WRITE: 'SY-SUBRC' , sy-subrc.
ENDFORM.                    " DISPLAY-DATA
      FORM FORMAT_MESSAGE                                           *
FORM format_message.
DATA: l_msg(100),
   l_index LIKE sy-tabix.
LOOP AT messtab.
    READ TABLE gu_upload INDEX l_index.
    CALL FUNCTION 'FORMAT_MESSAGE'
         EXPORTING
              id        = messtab-msgid
              lang      = sy-langu
              no        = messtab-msgnr
              v1        = messtab-msgv1
              v2        = messtab-msgv2
              v3        = messtab-msgv3
              v4        = messtab-msgv4
         IMPORTING
              msg       = l_msg
         EXCEPTIONS
              not_found = 1
              OTHERS    = 2.
    IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
   WRITE:/ l_msg.
ENDLOOP.
WRITE:/ l_msg.
ENDFORM.
Message was edited by:
        vijayd duvvada

Hi,
First , keep the mode "E" and check the debugger , you can exactly see where the error is and let me know, what error and where it is stoping.
By your coding, i suppose to think that, its proble in the amount (currency). When ever you are try to pass the value, and value is not there in upload file or data is mismatch, the call transaction will fail in mode 'A' and succesful in mode 'N'.
In that situation use this before the currecny field.
IF NOT FEBMKA-SSALD IS INTIAL.
   perform bdc_field using 'FEBMKA-ESALD'
                                  gu_upload-esald.
ENDIF.
tHANKS
Manju

How to use Call Transaction in AVL ........ for va02

Hi Experts,
I am using CALL TRANSACTION in ALV for VA02, but I want to go on item number. The following form i have used and it is working but I want to go on perticular item number in va02. pl. guide me.
FORM user_command USING r_ucomm LIKE sy-ucomm
                  rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN '&IC1'.
    IF rs_selfield-fieldname = 'VBELN'.
      READ TABLE it_out INTO wa_itab INDEX rs_selfield-tabindex.
      SET PARAMETER ID : 'AUN' FIELD wa_itab-vbeln .
                       'APO' FIELD wa_itab-posnr.
      CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
    ENDIF.
ENDCASE.
ENDFORM.
*=====================================
Yusuf

Hi,
use BDC for that....
check out the BDC part of coding for it.
REFRESH itab_bdcdata.
CLEAR    itab_bdcdata.
*initial screen
PERFORM bdc_dynpro      USING 'SAPMV45A'
                                '0102'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'VBAK-VBELN'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'VBAK-VBELN'
                      <b>          g_t_atpma4-vbeln.</b>
*item overview screen
PERFORM bdc_dynpro      USING 'SAPMV45A'
                                '4001'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=POPO'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RV45A-MABNR(04)'.
*popup screen (move item to top)
PERFORM bdc_dynpro      USING 'SAPMV45A'
                                '0251'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RV45A-POSNR'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=POSI'.
PERFORM bdc_field       USING 'RV45A-POSNR'
                                <b>g_t_atpma4-posnr.</b>
*item overview screen
PERFORM bdc_dynpro      USING 'SAPMV45A'
                                '4001'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '/00'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'VBAP-POSNR(01)'.
PERFORM bdc_field       USING 'RV45A-VBAP_SELKZ(01)'
                                'X'.
*Call transaction VA02
CALL TRANSACTION 'VA02' USING itab_bdcdata
                           MODE 'E'
                           UPDATE 'A'
                           MESSAGES INTO itab_bdcmsg.
Patil

How to use call transaction 'XD03' in abap.

Hi Experts,
I am use call transaction xd03 in programme but when i click on any customer number the transaction xd03 is called and it show only one customer details. i.e 1 st in row . other customer details not show. so please write code to solved my problems

Hi
It's not clear where you set the USER_COMMAND routine and where you set the OK_CODE for doubleclick.
I suppose you set the routine in the importing parameter I_CALLBACK_USER_COMMAND (?) becasue you aren't use the parameter for the event, but for OK_CODE?
Remember the OK_CODE should be upper case:
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
"WHEN 'kunnr'.   <--------------- UPPER CASE
WHEN 'KUNNR'.
See my sample:
TYPE-POOLS SLIS.
DATA: BEGIN OF GT_FINAL OCCURS 0,
        KUNNR LIKE KNA1-KUNNR,
        NAME1 LIKE KNA1-NAME1,
      END OF GT_FINAL.
* ALV
DATA: GT_FIELDCAT   TYPE SLIS_T_FIELDCAT_ALV,
      GT_LAYOUT     TYPE SLIS_LAYOUT_ALV,
      GT_REPID    LIKE SY-REPID.
START-OF-SELECTION.
SELECT KUNNR NAME1 INTO TABLE GT_FINAL
     UP TO 20 ROWS
       FROM KNA1.
GT_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME     = GT_REPID
      I_INTERNAL_TABNAME = 'GT_FINAL'
      I_INCLNAME         = GT_REPID
    CHANGING
      CT_FIELDCAT        = GT_FIELDCAT[].
GT_LAYOUT-F2CODE = 'KUNNR'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = GT_REPID
      I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
      IS_LAYOUT               = GT_LAYOUT
      IT_FIELDCAT             = GT_FIELDCAT
    TABLES
      T_OUTTAB                = GT_FINAL.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                        RS_SELFIELD TYPE SLIS_SELFIELD.
DATA: GWA_FINAL LIKE GT_FINAL.
CASE R_UCOMM.
    WHEN 'KUNNR'.
      READ TABLE GT_FINAL INTO GWA_FINAL INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SET PARAMETER ID 'KUN' FIELD GWA_FINAL-KUNNR.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
ENDFORM.TYPE-POOLS SLIS.
DATA: BEGIN OF GT_FINAL OCCURS 0,
        KUNNR LIKE KNA1-KUNNR,
        NAME1 LIKE KNA1-NAME1,
      END OF GT_FINAL.
* ALV
DATA: GT_FIELDCAT   TYPE SLIS_T_FIELDCAT_ALV,
      GT_LAYOUT     TYPE SLIS_LAYOUT_ALV,
      GT_REPID    LIKE SY-REPID.
DATA: FL_INPUT_OFF.
START-OF-SELECTION.
SELECT KUNNR NAME1 INTO TABLE GT_FINAL
     UP TO 20 ROWS
       FROM KNA1.
GT_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME     = GT_REPID
      I_INTERNAL_TABNAME = 'GT_FINAL'
      I_INCLNAME         = GT_REPID
    CHANGING
      CT_FIELDCAT        = GT_FIELDCAT[].
GT_LAYOUT-F2CODE = 'KUNNR'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = GT_REPID
      I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
      IS_LAYOUT               = GT_LAYOUT
      IT_FIELDCAT             = GT_FIELDCAT
    TABLES
      T_OUTTAB                = GT_FINAL.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                        RS_SELFIELD TYPE SLIS_SELFIELD.
DATA: GWA_FINAL LIKE GT_FINAL.
CASE R_UCOMM.
    WHEN 'KUNNR'.
      READ TABLE GT_FINAL INTO GWA_FINAL INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SET PARAMETER ID 'KUN' FIELD GWA_FINAL-KUNNR.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
ENDFORM. TYPE-POOLS SLIS.
DATA: BEGIN OF GT_FINAL OCCURS 0,
        KUNNR LIKE KNA1-KUNNR,
        NAME1 LIKE KNA1-NAME1,
      END OF GT_FINAL.
* ALV
DATA: GT_FIELDCAT   TYPE SLIS_T_FIELDCAT_ALV,
      GT_LAYOUT     TYPE SLIS_LAYOUT_ALV,
      GT_REPID    LIKE SY-REPID.
DATA: FL_INPUT_OFF.
START-OF-SELECTION.
SELECT KUNNR NAME1 INTO TABLE GT_FINAL
     UP TO 20 ROWS
       FROM KNA1.
GT_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      I_PROGRAM_NAME     = GT_REPID
      I_INTERNAL_TABNAME = 'GT_FINAL'
      I_INCLNAME         = GT_REPID
    CHANGING
      CT_FIELDCAT        = GT_FIELDCAT[].
GT_LAYOUT-F2CODE = 'KUNNR'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = GT_REPID
      I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
      IS_LAYOUT               = GT_LAYOUT
      IT_FIELDCAT             = GT_FIELDCAT
    TABLES
      T_OUTTAB                = GT_FINAL.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                        RS_SELFIELD TYPE SLIS_SELFIELD.
DATA: GWA_FINAL LIKE GT_FINAL.
CASE R_UCOMM.
    WHEN 'KUNNR'.
      READ TABLE GT_FINAL INTO GWA_FINAL INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        SET PARAMETER ID 'KUN' FIELD GWA_FINAL-KUNNR.
        CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
      ENDIF.
ENDCASE.
ENDFORM.
Max

How to use call transaction stmt from webdynpro application

Hi Expers,
Can I use call transaction 'tcode' in my webdynpro application, I have tried in my application but i am getting short dump saying
Error analysis+
An exception occurred that is explained in detail below.The exception, which is assigned to class'CX_SY_SEND_DYNPRO_NO_RECEIVER', was not caught and therefore caused a runtime error. The reason for the exception is: During background processing, the system attempted to send a screen to a user. Current screen: "SAPLMGMM " 0060.
I haven't used any more statements in my application am sure from my application side everything perfect. but I have seen a screen shot
with SAP screen in webbrowser.
Please help me out if you are not clear abt my doubt please ask me for clear idea.
Thanks in advance
Phalani M

Hello,
Since you can't use the call transaction command in web dynpros components, I suggest you to create a report and fill a BDC table on this and use the call transaction in this report.
So, in your web dynpro component you can use a command SUBMIT to create a job in background.
DATA: number           TYPE tbtcjob-jobcount,
      name             TYPE tbtcjob-jobname VALUE 'JOB_TEST',
      print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = name
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                    WITHOUT SPOOL DYNPRO
                    VIA JOB name NUMBER number
                    AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = number
        jobname              = name
        strtimmed            = 'X'
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDIF.
Regards.

Passing select-options values using call transaction method

Hi Experts,
I have a scenario in which i have three fields BUKRS,WERKS and MATKL in an internal table i_tab and I have MATNR as a selection-option.
After this I have to use call transaction <tcode> for all the line items in the internal table and the MATNR select-option values I have to pass directly for each line of i_tab using call transaction method.
TYPES: BEGIN OF t_tab,
          bukrs TYPE bukrs,
          werks TYPE werks_d,
          matkl TYPE matkl,
        END OF t_tab.
DATA: w_tab TYPE t_tab,
            i_tab      TYPE STANDARD TABLE OF t_tab.
SELECT-OPTIONS: s_matnr FOR marc-matnr.
Now I am putting a loop at i_tab and have to use CALL TRANSACTION <TCODE> for each line with the SELECT-OPTIONS for MATNR.
Please tell me whether we can pass multiple ranges for MATNR using call transcation method.
for example there can be multiple single values/multiple ranges/excluded ranges for MATNR. so please suggest me how tho achieve this sceanrio using CALL transaction method of BDC.
Thanks a lot.
Regards,
Krishan

Hi Krishan,
For the Call transaction TCODE there is extension ....OPTIONS from OPT. Just Check it out. I think it is possible like this.
... OPTIONS FROM opt
*Effect*
This addition gives you control using the values of the components of the structure opt, which must be of the Dictionary type CTU_PARAMS. The components have the following meaning:
DISMODE
Processing mode (comparable with the MODE addition)
UPDMODE
Update mode (comparable with the UPDATE addition)
CATTMODE
CATT mode (controlling a CATT procedure)
The CATT mode can have the following values:
' ' No CATT procedure active
'N' CATT procedure without single screen control
'A' CATT procedure with single screen control
DEFSIZE
Use standard window size
RACOMMIT
COMMIT WORK does not end CATT procedure
NOBINPT
No batch input mode, that s SY-BINPT = SPACE.
NOBIEND
No batch input mode after BDC data has been read
The components DEFSIZE , RACOMMIT, NOBINPT, NOBIEND always take the following values:
'X' Yes
' ' No
If the OPTIONS addition is omitted, the following settings are valid for the control parameters:
DISMODE from the MODE addition
UPDMODE
from the UPDATE addition
CATTMODE
No CATT procedure active
DEFSIZE
Do not use standard window size
RACOMMIT
COMMIT WORK ends procedure successfully
NOBINPT
Batch input mode, that is SY-BINPT =X.
NOBIEND
Batch input mode also active after BDC data has been read
Regards,
Swapna.

Supress message in status bar when using Call Transaction

Hi,
I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
As this was a Flowrack storage type we will assign Source HU during TO confirmation. So I went for a BDC.
But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
Please let me know for more information.
Thanks,
Manoj.

>
kaka79 wrote:
> I have designed a RF program and I am using a BDC program to call LT11 transaction for confirming TO.
> But after confirmation I am getting a Status message TO XXX confirmed in the status bar which is also displayed in the RF Screen for every line item confirmed. I want to supress this message.
> I am getting this message in the messtab table as well by using Call Transaction. So how can I supress this message in Status bar.
The CTU (CALL TRANSACTION ... USING ...) captures and stores all the messages into the message internal table (... MESSAGES INTO itab ...), but they are not displayed. So, if one of them appears in the status bar, it's because there is an additional MESSAGE ... statement in the program using the CTU. So look at it and add a condition before the MESSAGE statement to not output this exact message (click the message on status bar to get the message number, or debug the program to get it from the message internal table).

Can we use Call transaction and session method in same program ?

Hi experts,
Is it suggested to use call Transaction and session method in the same Program ?
i have a doubt , why cant we use multiple call transactions in same program instead of session method if we have multiple transaction updations ?

Hi Dengyong Zhang,
we can use the call transation and session method in same program.
However for better performance it's benificial to use call trasaction method of BDC. but if u want to upload very large amount of data then Session method is more preferable to use.
Session method is one of the method of BDC.
U can also use BAPI to upload the data in SAP but it's a different concept than BDC. Performance wise BAPI is more advantageous than BDC.

Please tell me the cases when I will use Call transaction/ Batch Session.

Can you please tell me when I will use Call transaction or Batch Session in the time of uploading data through BDC.
Regards,
Subhasish

Hi subhasish,
1. One of the main criteria is
2. If error handling facility is required, then batch session is the best,
otherwise if we use call transaction, then error handling code,
has to be written in the program itself.
3. Batch session provides lot of facilities to the user.
regards,
amit m.

How to create a session using call transaction method.

hi , this is nagaraju,
How to create a session using call transaction method.

Hi,
About Data Transfer In R/3 System
When a company decides to implement the SAP R/3 to manage business-critical data, it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement existing application.
In the process of replacing current applications and transferring application data, two situations might occur:
     The first is when application data to be replaced is transferred at once, and only once.
     The second situation is to transfer data periodically from external systems to SAP and vice versa.
     There is a period of time when information has to be transferred from existing application, to SAP R/3, and often this process will be repetitive.
The SAP system offers two primary methods for transferring data into SAP systems. From non-SAP systems or legacy system. These two methods are collectively called batch input or batch data communication.
1. SESSION METHOD
2. CALL TRANSACTION
3. DIRECT INPUT
First step for both the methods is to upload the data to internal table. From Internal Table, the data is transferred to database table by two ways i.e., Session method and Call transaction.
Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.
When the program has finished generating the session, you can run the session to execute the SAP transactions in it. Unless session is processed, the data is not transferred to database table.
A technique similar to SESSION method, while batch input is a two-step procedure, Call Transaction does both steps online, one after the other. In this method, you call a transaction from your program.
SESSION METHOD
Data is not updated in database table unless Session is processed.
No sy-subrc is returned.
Error log is created for error records.
Updation in database table is always synchronous
CALL TRANSACTION
Immediate updation in database table.
Sy-subrc is returned.
Errors need to be handled explicitly
Updation in database table can be synchronous Or Asynchronous.
Regards,
Sruthi.

Skip first screen of BD87 using call transaction with BDC_DATA option

hello all,
i am using call transaction with BDC_DATA option and i want to skip first screen, so can anyone please tell me how can i skip first screen of BD87 and get second screen that is output screen?
regards.

Hi
Build a BDCDATA with following code..
                                                      T     BD87
RBDMON00     1100     X
BDC_CURSOR     SX_DOCNU-LOW
                                                            BDC_OKCODE     =CRET
                                                            SX_DOCNU-LOW
SX_CRETI-LOW     00:00:00
                                                            SX_CRETI-HIGH     00:00:00
                                                            SX_UPDDA-LOW     05.02.2010
                                                            SX_UPDDA-HIGH     05.02.2010
                                                            SX_UPDTI-LOW     00:00:00
                                                            SX_UPDTI-HIGH     00:00:00
RBDMON00     0100     X
BDC_OKCODE     =BACK
RBDMON00     1100     X
BDC_OKCODE     /ECBAC
                                                            BDC_CURSOR     SX_DOCNU-LOW

Va01 upload using call transaction,item details r overwrite ,how to solve

Similar Messages

Maybe you are looking for