VA02 - Saving - Item data

Hello Friends,
I am facing some issue in SO change - Va02.
I have added a line item and have saved it earlier. I select the line item go to the Dispaly Sold to Party details, Go to Sales area Data - Select the Shipping tab.
Here we use the delivery priority for raising few rejections and stop the processign of the line item.
But in the Usetr Exit MV45AFZZ - Under document save and Prepare I have written the code for reason for rejection and update ZVBPA structure with valid data as per requirements.
This works fine when I do any change in SO at ITem level details and hit save button every thing works fine.
But when I change some thing in header and without touching the Line item, the XVBPA Sturture though has values populated as per my code. It is not getting popluated in Update VBPA in the Std program.
The structure that is finally getting passed to this update is empy (blank).
How do we make sure that The Line ITems also gets updated along with the header data for every change we do in the User Exit?
This is very Critical.
Regards
Ramesh

Hi,
If you want to make sure partner function/item changes should trigger the user-exit write your logic under
FORM userexit_move_field_to_vbap.
Also validate header changes through FORM userexit_move_field_to_vbak..
Always modify the structure prefixed 'X'.
For eg: XVBAK, XVBAP, XVBPA, etc.
Also check include ZXV09U02 in user exit LXV09U02.
Regards,
Amit
Edited by: Amit Iyer on Aug 31, 2009 5:33 PM

Similar Messages

  • Module pool- only first line item data saved, rest disappears??

    Hi Experts,
    I have one module pool that was developed by other developer. It has header details input fields and items details input by table control.
    Now below scenarios occur:
    1) When I enter only one line item, and save it, the data is saved properly
    2) when I enter more than one item data and save it, it only saves first line item data.
    3).When I press ENTER button after every new line item data, it saves all the data properly.
    I tried to debug the report but could not find the exact problem statement as the code is written very badly without any comments.
    I am pasting the flow logic code below for the screen.
    So please help me figure out the problem and solution for it.
    +++++++++++++++++++++++++++++++++++
    PROCESS BEFORE OUTPUT.
    *&SPWIZARD: PBO FLOW LOGIC FOR TABLECONTROL 'IT_MSEG'
       MODULE it_mseg_change_tc_attr.
    *&SPWIZARD: MODULE IT_MSEG_CHANGE_COL_ATTR.
       LOOP AT   it_gp
            INTO wa_gp
            WITH CONTROL it_mseg
            CURSOR it_mseg-current_line.
         MODULE it_mseg_get_lines.
    *&SPWIZARD:   MODULE IT_MSEG_CHANGE_FIELD_ATTR
       ENDLOOP.
    * MODULE STATUS_9001.
       MODULE deactive_screen.
    PROCESS AFTER INPUT.
    *&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'IT_MSEG'
       LOOP AT it_gp.
         CHAIN.
           FIELD wa_gp-yposnr.
           FIELD wa_gp-matnr.
           FIELD wa_gp-maktx.
           FIELD wa_gp-meins MODULE check_uom ON INPUT..
    *      FIELD WA_GP-DOC_QTY.
    *      FIELD WA_GP-REC_QTY.
           FIELD wa_gp-gp_qty.
           FIELD wa_gp-chall_qty.
           FIELD wa_gp-netwr.
           FIELD wa_gp-remarks.
           FIELD wa_gp-exp_ret.
           MODULE it_mseg_modify ON CHAIN-REQUEST.
         ENDCHAIN.
         FIELD wa_gp-chk
           MODULE it_mseg_mark ON REQUEST.
       ENDLOOP.
       MODULE it_mseg_user_command.
    *&SPWIZARD: MODULE IT_MSEG_CHANGE_TC_ATTR.
    *&SPWIZARD: MODULE IT_MSEG_CHANGE_COL_ATTR.
       MODULE user_command_9001.
    +++++++++++++++++++++++++++++++++++
    Thanks,
    Vishal.

    Hi Aruna,
    Below is the code as you required.
    +++++++++++++++++++++++++++++
    MODULE user_command_9001 INPUT.
       ygp_header_mas-ret_type = v_gpt.
       CASE sy-ucomm.
         WHEN 'MBLNR'.
           PERFORM select_mblnr.
         WHEN 'DEL'.
           PERFORM select_delivery.
         WHEN 'INTI'.
           PERFORM grt_gi_details.
         WHEN 'GENT'.
           PERFORM get_ge_details.
         WHEN 'GP'.
           PERFORM get_returnable_gp.
         WHEN 'SAVE'.
           PERFORM gen_gp_number.
           PERFORM gen_data.
           PERFORM save_data.
         WHEN OTHERS.
           PERFORM get_ge_details_other.
           IF it_gp[] IS INITIAL.
             INSERT INITIAL LINE INTO it_gp INDEX 1.
           ENDIF.
       ENDCASE.
       IF v_entry = 07 .
         PERFORM serial_no1.
         PERFORM insert_row.
       ENDIF.
       IF sy-ucomm IS INITIAL.
         PERFORM calc_amt.
       ENDIF.
       CLEAR:sy-ucomm.
    ENDMODULE.                    "user_command_9001 INPUT
    +++++++++++++++++++++++++++++++
    MODULE it_mseg_user_command INPUT.
       ok_code = sy-ucomm.
       PERFORM user_ok_tc USING    'IT_MSEG'
                                   'IT_GP'
                                   'CHK'
                          CHANGING ok_code.
       sy-ucomm = ok_code.
    ENDMODULE.                    "IT_MSEG_USER_COMMAND INPUT
    ++++++++++++++++++++++++++++++++++
    MODULE it_mseg_modify INPUT.
       MODIFY it_gp
         FROM wa_gp
         INDEX it_mseg-current_line.
    ENDMODULE.                    "IT_MSEG_MODIFY INPUT    
    ====> Above module has some problem i think as while debugging it was not updating IT_GP as the current line number was not matching with IT_GP as it has only one line item and WA_GP was changing. Also WA_GP data was getting changed with LOOP with all line items data.
    ++++++++++++++++++++++++++++++++++++++++++++++
    MODULE it_mseg_mark INPUT.
       DATA: g_it_mseg_wa2 LIKE LINE OF it_gp.
       IF it_mseg-line_sel_mode = 1
       AND wa_gp-chk = 'X'.
         LOOP AT it_gp INTO g_it_mseg_wa2
           WHERE chk = 'X'.
           g_it_mseg_wa2-chk = ''.
           MODIFY it_gp
             FROM g_it_mseg_wa2
             TRANSPORTING chk.
         ENDLOOP.
       ENDIF.
       MODIFY it_gp
         FROM wa_gp
         INDEX it_mseg-current_line
         TRANSPORTING chk.
    ENDMODULE.                    "IT_MSEG_MARK INPUT
    +++++++++++++++++++++++++++++++++++++++++
    If I press ENTER after entering each line item, all records come in IT_GP but if not then only first line item comes. Also if I dont press ENTER after entering the first line item and and add one item (total 2) and then press ENTER then sometimes both the lines disappear.
    Thanks,
    Vishal

  • Line item data is not saving while creating a Sales order using Interactive

    Hi all,
    I am creating a sales order Using Interactive forms. In the form i am having Header data and line item data.I had created two structures one for Header data and one for Line item data. For entering  the LINE ITEM DATA i had created a Dynamic table with Buttons ADD ROW and DELETE ROW.
    User will Add the Row or Delete the Row based on the requirement.
    My issue is When ever the user clicks the SUBMIT button after entering the header data and 3 line items data , Sales order has been created with only first line item and the remaining two line items are not created.
    My Interactive form is like below
    HEADER DATA
    DOC_TYPE
    SALES_ORG
    DIST_CHN
    DIVISION
    PURCH_NO
    PARTN_ROLE
    PART_NO
    LINE ITEM DATA
                             ITEM_NO      MATERIAL          PLANT          QTY        COND_TYPE            COND_VALUE
    ADD ROW
    DELETE ROW
                                                                                    SUBMIT
    My  code for the method ONACTIONCLICK is like below
    method ONACTIONCLICK .
    data:
          Node_Adobe       type ref to If_Wd_Context_Node,
          Node_Zsaleheader       type ref to If_Wd_Context_Node,
          Elem_Zsaleheader       type ref to If_Wd_Context_Element,
          Stru_Zsaleheader       type If_Main=>Element_Zsaleheader,
          Node_Zsaleitem       type ref to If_Wd_Context_Node,
          Elem_Zsaleitem       type ref to If_Wd_Context_Element,
          Stru_Zsaleitem       type If_Main=>Element_Zsaleitem.
      data: header_data type BAPISDHEAD.
      data: item_wa type BAPIITEMIN.
      data: item_data type table of BAPIITEMIN.
      data: partner_wa type BAPIPARTNR.
      data: partner_data type table of BAPIPARTNR.
      data: sales_order type BAPIVBELN-VBELN.
      data: Errorlog type BAPIRETURN1.
    navigate from <CONTEXT> to <ADOBE> via lead selection
      Node_Adobe = wd_Context->get_Child_Node( Name = IF_MAIN=>wdctx_Adobe ).
    navigate from <ADOBE> to <Zsaleheader> via lead selection
      Node_Zsaleheader = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleheader ).
      Node_Zsaleitem = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleitem ).
    get element via lead selection
      Elem_Zsaleheader = Node_Zsaleheader->get_Element(  ).
      Elem_Zsaleitem = Node_Zsaleitem->get_Element(  ).
    get all declared attributes
      Elem_Zsaleheader->get_Static_Attributes(
        importing
          Static_Attributes = Stru_Zsaleheader ).
      header_data-DOC_TYPE = Stru_Zsaleheader-DOC_TYPE.
      header_data-SALES_ORG = Stru_Zsaleheader-SALES_ORG.
      header_data-DISTR_CHAN   = Stru_Zsaleheader-DISTR_CHAN.
      header_data-DIVISION = Stru_Zsaleheader-DIVISION.
      header_data-PURCH_NO = Stru_Zsaleheader-PURCH_NO.
      partner_wa-PARTN_ROLE   = Stru_Zsaleheader-PARTN_ROLE.
      partner_wa-PARTN_NUMB = Stru_Zsaleheader-PARTN_NUMB.
       append partner_wa to partner_data.
        Elem_Zsaleitem->get_Static_Attributes(
        importing
          Static_Attributes = Stru_Zsaleitem ).
      item_wa-ITM_NUMBER = Stru_Zsaleitem-ITM_NUMBER.
      item_wa-MATERIAL   = Stru_Zsaleitem-MATERIAL.
      item_wa-PLANT = Stru_Zsaleitem-PLANT.
      item_wa-REQ_QTY = Stru_Zsaleitem-REQ_QTY.
      item_wa-COND_TYPE   = Stru_Zsaleitem-COND_TYPE.
      item_wa-COND_VALUE = Stru_Zsaleitem-COND_VALUE.
      append item_wa to item_data.
    CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
      EXPORTING
        ORDER_HEADER_IN           = header_data
      WITHOUT_COMMIT            = ' '
      CONVERT_PARVW_AUART       = ' '
    IMPORTING
       SALESDOCUMENT             = sales_order
      SOLD_TO_PARTY             =
      SHIP_TO_PARTY             =
      BILLING_PARTY             =
       RETURN                    = errorlog
      TABLES
        ORDER_ITEMS_IN            = item_data
        ORDER_PARTNERS            = partner_data
      ORDER_ITEMS_OUT           =
      ORDER_CFGS_REF            =
      ORDER_CFGS_INST           =
      ORDER_CFGS_PART_OF        =
      ORDER_CFGS_VALUE          =
      ORDER_CCARD               =
      ORDER_CFGS_BLOB           =
      ORDER_SCHEDULE_EX         =
    endmethod.
    PLEASE SUGGEST ME IF ANY CODE CHANGE IS REQUIRED
    Thanks in advance
    Ajay

    Hi,
    The item data is not read because, the dynamically added rows should also reflect back to the Web Dynpro context. When the user clicks on Add Row, use the Onsubmit event to add a empty line to internal table and then bind it to the context. And if the user removes a row, remove a row from internal table and bind it back to the context.
    You may refer this article.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
    Regards,
    Runal

  • Generic Data source using FM for BOM Item data is not saving

    Hi Experts,
    This is the first time I post on this forum.
    I am creating a custom datasource (ycp_bom_itm) based on Function Module in R/3 which get data from MAST and STPO.
    I have defined the Function Module and the extraction structure as well.
    So While saving the Data source i am getting Error as
    " Units field MEINS for field ZMENGE of DataSource ycp_bom_itm is hidden
         Message no. R8147"
    Does any of you have experience of this issue? Please Help to solve this issue
    Thank's In advance

    Hi,
    Go to Rsa6 and select relevant d.s (Custom) there will be 4  options for each field selction, hide fieldi ,nversion,field only .
    check MEINS  field  details either it is checked/unchecked (Enable/disabled)  hide field , need to be un checked.
    Thanks.

  • Adding new fields to Item Data - PO (ME

    Hi All,
    Is it possible to add new custom fields to PO Item Data in Confirmations tab and these new fields are required only in PO Change (ME22N).
    How can we achieve this!
    Can anybody provide feasible solution for the same!
    can anybody tell me if this is possible!
    Thanks in advance.
    Thanks,
    Deep.

    Hi All,
    Thanks for the reply.
    Can anybody confirm BADI ME_GUI_PO_CUST will acheive desired functionality for above posted issue!
    Functionality: Adding new custom fields to confirmation tab. During Inbound delivery in confirmation tab (Item data) if 'Confirmation category' is selected then the new custom fields should show up below for input & they can be saved.
    if 'Confirmation category' is not selected then new custom fields should be invisible.
    Thanks,
    Deep.
    Edited by: Deep on Jul 24, 2009 4:49 AM
    Edited by: Deep on Jul 24, 2009 5:05 AM

  • Header and Item data in a module pool

    Hi Friends,
    I designed a screen in that i have header data and item data.
    Here in my screen header i have vendor number,Vendor name,
    bank Name, Branch, LC value and Due date fields.
    and for item details i have to take table control.In the item details i have the fields Sl No, PO Number and Po Value.
    and Two push buttons i need to put.SAVE and CANCEL.
    When i click on SAVE all my screen details should be saved in a ZTABLE and should generate a LCDOCUMENT-Number from the system.
    So my question is shell i take the two tables for header and item data or one is enough and if i take two tables(one is header and one is item data) how i write the logic to store into the ztables.
    How can i proceed.Plz provide me with ur inputs
    Thanks and Regards.

    Hi!
    you have to take one table.....in which u have to move the header and item data into that b'coz according to the header data the items are to be displayed.......
    select the data for which ever tables they came and then take a final table in which include all the fields of header and item .loop on all the tables from which data u have taken and inside it move the data of those fields into the fields of the final table.
    In the ALV u need to call the function module to display the ALV with that final table in which ur all data is there and prepare a field catalog of those fields you want to display in the item list.
    for example a sample code is there...
    types:
      begin of type_s_vbak,
        vkorg type vbak-vkorg,             " Sales Organization
        aufnr type vbak-aufnr,             " Sales Order Number
        auart type vbak-auart,             " Sales Order Type
        kunnr type vbak-kunnr,             " Customer Number
        vbeln type vbak-vbeln,             " Sales Document
        knumv type vbak-knumv,             " Number of Document Condition
      end of type_s_vbak.                  " BEGIN OF TYPE_S_VBAK
    types:
      begin of type_s_konv,
        kwert type konv-kwert,             " Condition Value
        kbetr type konv-kbetr,             " Rate (Condition Amount)
        knumv type konv-knumv,             " Number of Document Condition
        kschl type konv-kschl,             " Condition Type
      end of type_s_konv.                  " BEGIN OF TYPE_S_KONV
    types:
      begin of type_s_material,
        kunnr      type vbak-kunnr,          " Customer Number
        matnr      type vbap-matnr,          " Material Number
        arktx       type vbap-arktx,          " Material Description
        steuc       type marc-steuc,          " Fiscal Classification
        kwmeng   type vbap-kwmeng,         " Quantity
        knumv      type vbak-knumv,          " Number of Document Condition
        vbeln        type vbak-vbeln,          " Document Number
        kwert       type konv-kwert,          " Condition Value
        total         type p length 14 decimals 2,
                                           " Total
        ipitype  type p length 9 decimals 3,
                                           " IPI Type
        ipivalue type konv-kwert,          " IPI Value
      end of type_s_material.              " BEGIN OF TYPE_S_MATERIAL
    data:
      fs_vbak type type_s_vbak.
    data:
      fs_mati type type_s_material.
    data:
      fs_konv type type_s_konv.
    data:
       t_vbak like
    standard table
           of fs_vbak.
    data:
       t_konv like
    standard table
           of fs_konv.
    data:
       t_mati like
    standard table
           of fs_mati.
    loop at t_konv into fs_konv where kschl eq 'ZPNF'.
        move fs_konv-kwert to fs_mati-kwert.
        modify t_mati from fs_mati
        transporting kwert
        where knumv eq fs_konv-knumv.
      endloop.                             " LOOP AT T_KONV INTO FS_KONV
    * Modifying Total Field of Material Table.
      loop at t_mati into fs_mati.
        w_total = fs_mati-kwmeng * fs_mati-kwert.
        move  w_total to fs_mati-total.
        modify t_mati from fs_mati
        index sy-tabix
        transporting total.
        clear w_total.
      endloop.                             " LOOP AT T_KONV INTO FS_KONV
    * Modifying IPI-Type Field of Material Table.
      loop at t_konv into fs_konv where kschl eq 'IPI3'.
        w_total = fs_konv-kbetr div 10.
        move w_total to fs_mati-ipitype.
        modify t_mati from fs_mati
        transporting ipitype
        where knumv eq fs_konv-knumv.
        clear w_total.
      endloop.                             " LOOP AT T_KONV INTO FS_KONV
    * Modifying IPI-Value Field of Material Table.
      loop at t_konv into fs_konv where kschl eq 'IPI3'.
        move fs_konv-kwert to fs_mati-ipivalue.
        modify t_mati from fs_mati
        transporting ipivalue
        where knumv eq fs_konv-knumv.
      endloop.                             " LOOP AT T_KONV INTO FS_KONV
    and then fill the fieldcatalog and display the ALV
    Edited by: Richa Tripathi on Apr 15, 2009 3:28 PM

  • What are the setting for Save button for saving plan data in WAD template

    Hi,
    i created SAVE button in Webtemplate for saving plan data.But this button is not
    active.is there any setting for this?
    thanks in advance
    chandu

    Hi Chandu,
    The settings to Configure the  Save function.
    Right click the Button Group Item ® Properties ®  * Button    ® 
    Type Caption  ‘Save’ ® Command    ® Select ‘All Commands’ Tab ® 
    De-select ‘Execute Planning Function’ and then select checkbox ‘Save
    Changed Data’ ® Double click on ‘Save Changed Data’ ® OK ® OK ® Save your template.
    *pls assign points,if info is useful*
    Regards
    CSM Reddy

  • IW51 - Badi during save to change item data

    Hello experts,
    we are trying to modify on service notification the item data (classification data).
    We are trying to do it via BAdI Interface IF_EX_NOTIF_EVENT_SAVE.
    Once we reach that badi we want to update classification data using function BAPI_OBJCL_CHANGE.
    We pass the document number we have to the object key of the bapi (qmnum + fenum).
    But bapi returs us message that document xxxx does not exist.
    When we test bapi vie SE37 it works .
    But in the badi it seems failing cause the document is not yet commited.
    Do you have an idea of how we could call the bapi to change item data with document number saved before ? (other badi, exit, other solution,...)
    Or any other idea could be welcome.
    Thanks for the help.
    S.N

    Hi
    Transaction Code - VF01                     Create Billing Document
    Exit Name           Description
    J_3RSINV
    SDVFX001            User exit header line in delivery to accounting
    SDVFX002            User exit for A/R line in transfer to accounting
    SDVFX003            User exit cash clearing in transfer to accounting
    SDVFX004            User exit G/L line in transfer to accounting
    SDVFX005            User exit reserves in transfer to accounting
    SDVFX006            User exit tax line in transfer to accounting
    SDVFX007            User exit: Billing plan during transfer to Accounting
    SDVFX008            User exit: Processing of transfer structures SD-FI
    SDVFX009            Billing doc. processing KIDONO (payment reference number)
    SDVFX010            User exit item table for the customer lines
    SDVFX011            Userexit for the komkcv- and kompcv-structures
    V05I0001            User exits for billing index
    V05N0001            User Exits for Printing Billing Docs. using POR Procedure
    V60A0001            Customer functions in the billing document
    V60P0001            Data provision for additional fields for display in lists
    V61A0001            Customer enhancement: Pricing
    No of Exits:         17
    With Regards
    Nikunj Shah

  • Automatically Saving Form Data

    Hello,
    I'm looking for a way to automatically save the user input in background while the user is filling forms. I've had cases where the user is filling out large forms and when they accidentally closes the browser without "submitting the form", navigate away from the web page or the browser crashes only to find that all their data is lost. I've noticed if you submit the page without saving the data is cached/saved. I would think a technique to submit the page without the window refresh could work but not sure how that would function in APEX. Does anyone have any suggestions?
    thanks!
    Randy

    You have to work with javascript to do this.
    Register an onchange event to each input field and use an Ajax call to a plsql procedure that saves the item value in session state.
    Use this call:
    APEX_UTIL.SET_SESSION_STATE (
    p_name IN VARCHAR2 DEFAULT NULL,
    p_value IN VARCHAR2 DEFAULT NULL);
    Create an application process (on demand) that uses this call to save the item value, and call the application process using the url syntax with an Ajax call.
    I prefer using Jquery (See Jquery.com) to do such things, but you can use the Apex library function htmldb_Get to do this too.
    Will this work for you?
    Regards Guido

  • Problems loading saved item in LOV :-(

    I have two LOV's
    these are cascaded lists
    say p12_customer_name (parent) belongs to customer table
    and p12_project_list_id (child) belongs to items table
    When a customer name is selected , all the projects related to that customer are loaded in project_list_id LOV. I can perfectly create a new entry and it saves the data in the database as well
    Now when I click on the edit icon from an interactive report it loads everything apart from selected customer name and project name.
    here is how the table relation goes.
    there is one table called "*Items*" based on this table the interactive report is been created.
    this table has a column called project_list_item_id which is fk to "*project_list*" table which contains Customer_id column which in turn is fk to "*customer*" table.
    I need help as to how can I load the saved customer data??
    Any help on this would be beneficial.
    Thank you :-)
    ps: I am using Apex 4.2 (recent update)

    Hi,
    you will need a process or computation to populate your P12_customer_name/id page item, because it's not a database column.
    The process/computation should fire after the "Fetch" process on your page which populates the database column based p12_project_list_id.
    Try something like (if you use a computation of type SQL)
    select customer_id
      from project_list
    where project_list_item_id = :p12_project_list_idYou should also have a condition to only fire the process/computation if p12_project_list_id is not null, so that it doesn't fire if you are in CREATE mode.
    Regards
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • MIRO - item data change

    Hi,
    We want to change data when saving the invoice. We use these user-exits and enhancements but it doesn't change item data. (field : MATNR)
    enhancemet : LMR1M001 ,
    badi : INVOICE_UPDATE
    What can I do to change item data for matnr field.
    Thanks.

    Hi
    What you are intendiing to change is the Important criteria, if you are trying to change data whcih is linked to other objevct then it is not possible.
    Only free fields caqn be altered in the Invoice line item such as texts or any Cost object like cost center or WBS or Profit center....
    What is the field you are intending to change at update.
    Thanks & Regards
    Kishore

  • Plant Maintenance(PM) IW21  populating Item data

    Hi There,
        I have been looking to find out the way through we can populate the item data ( Object part, Damage and Cause codes) into the IW21 from a custom program while we create/change the Notification (maintenance).
        I created an action box to get the user inputs. from there I need to populate the iw21 item data. Can anyone please give some Idea on it.
       I have tried almost all the exits but couldnt find the right one.
      The only Exit which is available is QQMA0014. But this Checks before saving notification. my requirement to see the populated data while creating.
      any input is welcomed.
    Regards
    Srithan

    Hi,
        Check the BADI <b>NOTIF_EVENT_SAVE</b>.
    Regards

  • How do i get saved items from my desktop mac to my new I6. Had a I4 that got wiped out.

    How do i get my saved items and contacts from my desktop mac to my new iPhone 6. Had a iPhone 4 that crashed.

    Hi Jimmyb51,
    Thanks for participating in the Apple Support Communities.
    If you have information and content in Contacts and your iTunes library on your Mac, you can sync this data to your iPhone using the steps found at this link:
    Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
    If you were using iCloud on your iPhone 4, see these links for setting it up on your iPhone 6:
    iCloud: Change iCloud feature settings
    iCloud: Restore or set up your iOS device from iCloud
    Best Regards,
    Jeremy

  • Not saving the data in two tables

    Hello,
    its my production problem, i have an update form where you can update the records and these
    records will sit in the temp tables until the final approval from the supervisor.
    In this update form i have two table where i am saving the data one is dup_emp to save the
    officer data and another is the dup_address to save the officer where he worked data.
    in this form address form is pop up screen where you can update and gets back to the original
    form where you can see all the other fields. my problem is if a user hit the cancel button on
    address form example the user doesnt want to update any information on that screen so user
    cancel that screen, and comes to the other screen where the user makes the changes to the
    appropriate fields and hits the SAVE button. in this case its saving only to the dup_emp table
    data not the address data from the address form to dup_address table for the same record.
    if the user cancels in both the screens cancel button it should delete the record from both the
    tables but cancel in form and saves in another form it should save the record in both the
    tables.
    here is my code from both cancel buttons from both the forms.
    this is code is from address form cancel button.
    delete from dup_address
    where address_id=:address_id
    and parent_table_name='emp';
    commit;
    CLEAR_BLOCK;
    go_block('DUP_EMP');
    This code is from dup form of the cancel button
    declare
    temp_address_id varchar2 (12);
    begin
    delete from dup_emp
    where secondemp_id =:dup_emp.secondemp_id;
    delete from dup_address
    where parent_t_id=:global.secondemp
    and parent_table_name='emp';
    commit;
    clear_block;
    go_block('secondaryemp');
    END;

    Hi,
    As Aravind mentioned, it's nothing related to workflow. You have to find a BADI in tcode PA30 that could be used after the infotype is updated. So, you can use FM SAVE_TEXT.
    Regards,

  • How to create BOM(Bill Of Material) item data from flat file?

    I have two flat files one is BOM(Bill Of Material) header data and BOM item data. BOM header is already created, now I want to create BOM item data with reference to the header data. Is there any standard direct batch input method in LSMW or Is there any standard BAPI or Is there any standard BDC report program to do the task? CS01 is the TCode to create BOM.

    Hi,
    The DI program works for create step CS01 and not for CS02.
    Perhaps this ( adding items in header by Tx: CS02 ) could be achieved by a Recording step in LSMW.
    Best Regards, Murugesh

Maybe you are looking for