Validate in expression does not work

Hi,
I know this will sound a bit silly but..
When I hit a validate button in expression nothing appears in Validation Result field. And I've hit it about hundred times. Yesterday it was working fine...
It's pretty annoying..
Has anyone ever had this kind of problem?
Would be very very thankful for any hint.
Message was edited by:
Kaiser Vedran

I've had the same issue, it's a bug.
Close mapping and reopen, if that doesn't work close OWB Design Centre and restart. The validate button should then work again.
Si

Similar Messages

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Regular expression does not work in IE

Hi,
I'm having a regular expression which should check the content of an inputText field: it should contain a number, a character and the size should be at least 6. It's working when I test it in FireFox but it always fails to succeed in IE:
          <af:inputText>
            <af:validateRegExp pattern="^(?=.*[a-zA-Z])(?=.*[0-9])[a-zA-Z0-9]{6,24}$"
                               noMatchMessageDetail="Does not match."/>
          </af:inputText>How comes it does not work in IE (6.0)?
JDeveloper 10.1.3.3
Thanks in advance,
Koen Verhulst

hi Koen
The web page you refer to ...
http://www.fileformat.info/tool/regex.htm
... seems to be doing server side Java regular expressions (and as such will behave the same in both FF and IE).
The af:validateRegExp component you want to use does client side evaluation of the regular expression, using scripting, hence the apparent difference between FF and IE.
There is also this web page ...
http://www.regular-expressions.info/javascriptexample.html
... that seems to behave similar to the markup and scripting resulting from the af:validateRegExp component.
Besides the value "2abcdef" there seem to be others that are accepted by IE for the regular expression "^(?=.*[a-zA-Z])(?=.*[0-9])[a-zA-Z0-9]{6,24}$", values like these:
"a2abcdef", "a2abcde", "abcdef2abcde", "2a3cdef", "2a34567"
Although these values are not accepted by IE (but are accepted in FF):
"2abcde", "23bcdef"
success
Jan

SQL-Tokenizer based on regular-expressions does not work

I'm on 10gR2
Following SQL-Tokenizer converts string :str to rows using :delim as the delimiter-char (:str and :delim are parameters):
select level, regexp_replace(regexp_substr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ), :in_delimiter, '') as token
from dual
connect by regexp_instr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ) > 0
order by level asc ;
When using the pipe-symbol "|" as the delimiter, it doesn't work; the rows are processed, but the tokens are null. Using an other char as delimiter (e.g. ";") works fine.
:str = "123;456;A1;67X;0;-8" & :delim = ";" => works fine
:str = "123|456|A1|67X|0|-8" & :delim = "|" => does not work
I think the bug is in the regexp-parameter for the pattern, isn't it?
Why doesn't work the pipe-symbol as delimiter?
Can anybody give me a hint for using the correct regexp-pattern?
thx
Nuerni

select level, rtrim(regexp_substr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ),:in_delimiter ) as token
from dual
connect by regexp_instr( :in_str || :in_delimiter, '(.*?)' || :in_delimiter, 1, level ) > 0
order by level asc ;use a rtrim instead of regexp_replace then it works...
Ravi Kumar

SSRS 2008 Gauge ToolTips - expression does not work?

Hi,
I'm attempting to use various SSRS 2008 gauges in a report. When I attempt to use an expression in a tooltip such as '=Sum(Fields!ID.Value)' , the tooltip does not show up.
However if I replace that expression with a static value such as '1' it pops up.
It seems that an expression should work? Any reason that it would not?
Thanks

Hi,
I could reproduce the scenario you posted.
It is caused that string type is required for the
ToolTip property of the Gauge Pointer. So, please change the expression to
=CStr(Sum(Fields!ID.Value)).
If you have any question, please feel free to ask.
Thanks,
Tony Chain
Tony Chain [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Why my older Airport Express does not work with OS-X 10.9?

After getting my new iMac and upgrading to Marveric, I can not get my older AirPort Express work. Why?

Mavericks does not support the older "b/g" wireless versions of the AirPorts, only the newer "n" wireless versions.
You can use another Mac running Leopard or Snow Leopard, or a PC to administer the older AirPort Express.

Help Needed: Airport Express does not work

My Airport Express was ok until one day I setup it under bridge mode in a hotel room. Now neither my iMac and Dell laptop can update the settings in the Airport Express. It always shows error in reading the settings.
I have tried soft, hard reset and also tried to bring it back to factory settings. However, all these trials were not successful. It did not even blink with green light when I tried to reset it to factory settings (hold the reset pin, plug in power socket and then release the pin... I believe I did it right).
Also the network name I created in this Airport Express did not change to default name. The Airport Express name was restored to default though.
Does anyone know how to fix this? Do I have to send the hardware to Apple to fix it or it is just a software failure that I can fix at home with you guys help?
Thanks!

Same problem here -- followed instructions to do factory reset to a "T", never saw blinking green LED. Instead led blinks yellow. Always get an error in Airport Utility.
Apple had best quit poking fun at how lousy Microsoft stuff is before someone sees the large number of product complaints logged in the forums. It isn't smart to toss stones in a glass house.

Complex JDOQL expression does not work. Or maybe I'm doing something stupid?

Hi!
I have several related objects: Customer, Contract and AccessKey.
Each Customer has 1-to-many relationship with Contracts (so it can have
several contracts) and each Contract has 1-to-many relationship with
AccessKeys (so that contract can have several access keys).
I'm trying to obtain customer by property of access key using the
following code:
Query q = pm.newQuery(Customer.class, "contracts.contains(c) && " +
"c.accessKeys.contains(a) && " +
"a.pinCode == pin";
q.declareParameters("String pin");
q.declareVariables("Contract c");
q.declareVariables("AccessKey a");
Collection result = (Collection) q.execute("123");
All these objects (Customer, Contract and AccessKey) are
PersistenceCapable and located in the same package.
In result I get the following exception:
javax.jdo.JDOUserException: The field "c" of type "class
net.xtrim.crm.customer.object.Customer" does not exist or is not persistent.
     at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.getExpression(JDBCQuery.java:181)
     at com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:787)
     at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
     at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
What's wrong with such query? Maybe the problem is that I'm trying to
navigate through the field of the object obtained from the collection of
source object?
Thank you in advance.
Best regards,
Alexey Maslov

Variable and Parameter declarations are a one-time deal:
// note the ; seperator
q.declareVariables ("Contract c; AccessKey a");
// note the , separator
q.declareParameters ("String pin, String forExample");
So when you declare the access key variable, the query "forgets" about
c, and expects it to be a field, and no longer a variable.
Hope that solves your problem!
Alexey Maslov wrote:
Hi!
I have several related objects: Customer, Contract and AccessKey. Each
Customer has 1-to-many relationship with Contracts (so it can have
several contracts) and each Contract has 1-to-many relationship with
AccessKeys (so that contract can have several access keys).
I'm trying to obtain customer by property of access key using the
following code:
Query q = pm.newQuery(Customer.class, "contracts.contains(c) && " +
"c.accessKeys.contains(a) && " +
"a.pinCode == pin";
q.declareParameters("String pin");
q.declareVariables("Contract c");
q.declareVariables("AccessKey a");
Collection result = (Collection) q.execute("123");
All these objects (Customer, Contract and AccessKey) are
PersistenceCapable and located in the same package.
In result I get the following exception:
javax.jdo.JDOUserException: The field "c" of type "class
net.xtrim.crm.customer.object.Customer" does not exist or is not
persistent.
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCQuery.getExpression(JDBCQuery.java:181)
at
com.solarmetric.kodo.query.QueryImpl.executeWithMap(QueryImpl.java:787)
at
com.solarmetric.kodo.query.QueryImpl.executeWithArray(QueryImpl.java:668)
at com.solarmetric.kodo.query.QueryImpl.execute(QueryImpl.java:609)
What's wrong with such query? Maybe the problem is that I'm trying to
navigate through the field of the object obtained from the collection of
source object?
Thank you in advance.
Best regards,
Alexey Maslov
Stephen Kim
[email protected]
SolarMetric, Inc.
http://www.solarmetric.com

Bussines Hours shedule in unity express does not work properly

Hi,
End user has a unity express 8.0.5 version. I created an script with Editor Express where I defined a Bussines Hours Shedule.
I have noticed that sometimes the main menu prompts is played eventhough is not a working hours.Other times Bussiness Closed promts is played correctly but after it the main menu prompt is played (I expected to finish the script when the Bussiness Closed prompt is played).
I have checked several times but the problems remains, I do not know why. I attach the screen shot of script.
regards

You can ask advice at this forum.
*http://stackoverflow.com/questions/
It looks that the code that calculates the menu width and position isn't triggered unless you resize the window (changing the width 1px by dragging the border or zooming the page works), so the menu flyout still has the default setting.
I see:
<pre><nowiki><ul style="width: 51px; left: 1100px; display: none;" class="sub-container flmenu">
</nowiki></pre>
After a resize this changes to:
<pre><nowiki><ul style="width: 898px; left: 252px; display: none;" class="sub-container flmenu">
</nowiki></pre>
I don't know how this onresize event ($(window).on('resize', function()) would have to be triggered to initialize the menu properly.

Printing via Airport Express does not Work

I have been using an Airport Express Basestation with my Mac Mini and Epson Stylus 880 for about a year without a problem. Now I have moved to an Intel iMac and cannot print via Airport anymore. The file get´s spooled but then I get an error message saying that the printer driver might be incompatible. If I use the same driver with the local USB port everythings works fine.
Please help,
Ingo

Ingo,
try this link:
<http://discussions.apple.com/message.jspa?messageID=1674987#1674987>
Deivy

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?

The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.

Import mail function does not work for Outlook Express

working on a windows 8.1 laptop, trying to import emails from a Outlook Express directory that was moved to the new PC. Latest Thunderbird is running and the import starts and then very quickly finishes without importing anything.

Thunderbird import does not work on my XP machine either, I already tried it. Do you mean that outlook Express has to be running at the time of import?
I did migrate the mail folder into Windows live email, so I have access to the email but only as a kludgy 2 email solution.
Thunderbird does not recognize Live Mail, so that was not helpful.
I think the import broke in some previous release and has not been tested lately.

Oracle Database Express Edition 11g Release 2: Does not work in Windows x64

Hi
I download a year ago oracle 10g and installed in windows7/64bit.
Then I messed up my computer. So I had to reinstall from scratch.
oracle 10g seems to be not available anymore.
Now 11g is available. But it says does not work in x64.
Can somebody explain this?
Thanks
Beat

Hi, and welcome to the OTN forums!
I download a year ago oracle 10g and installed in windows7/64bit.
Now 11g is available. But it says does not work in x64.Well, in fact, 10.2 XE wasn't certified for x64 either, not even for Linux x64...
11.2 XE has a Linux x86_64 release, and there has been an announcement that there'll be a x64 release for Windows as well, but it's not available (yet).
There have been a lot of reports that people got 11.2 XE work on x64 Windows machines as well, with a few tweaks at installation time and/or afterwards...
You'll find tons of posts on that topic when using forum search...
oracle 10g seems to be not available anymore.Right, the official downloads have been removed after all database 10.2 releases fell out of (regular) support.
-Udo
Edited by: Udo on 15.04.2013 21:48

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Slide show does not work

I created a slide show. It works really well on the Prieview with a browser. Once I put it on the web it does not work. here is the code.
<%@LANGUAGE="JAVASCRIPT"
CODEPAGE="65001"%>
<!doctype html>
<html>
<head>
<meta charset="utf-8">

<title>Untitled Document</title>
<style type="text/css">
/* BeginOAWidget_Instance_2141542: #ImageSlideShow */
#ImageSlideShow.ImageSlideShow {
    width: 300px;
    height: 300px;
    border: solid 5px #000000;
#ImageSlideShow .ISSClip {
    background-color: #333333;
/* EndOAWidget_Instance_2141542 */
</style>

<style type="text/css">
#apDiv16 {
    position: absolute;
    left: 267px;
    top: 289px;
    width: 402px;
    height: 331px;
    z-index: 14;
    border: thick ridge rgb(0,0,255);
</style>
<style type="text/css">
#apDiv17 {
    position: relative;
    left: 687px;
    top: 287px;
    width: 346px;
    height: 65px;
    z-index: 15;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 18px;
    line-height: 20px;
    font-weight: bold;
    font-style: italic;
</style>
<style type="text/css">
#apDiv18 {
    position: absolute;
    left: 814px;
    top: 318px;
    width: 254px;
    height: 369px;
    z-index: 16;
    font-family: Arial, Helvetica, sans-serif;
    line-height: 3px;
    color: rgb(0,0,0);
    font-weight: bold;
#apDiv18 P FONT {
    color: rgb(0,0,0);
#apDiv18 P FONT {
    font-weight: normal;
</style>
<style type="text/css">
#apDiv19 {
    position: absolute;
    left: 301px;
    top: 280px;
    width: 426px;
    height: 328px;
    z-index: 1000;
</style>
<style type="text/css">
#apDiv20 {
    position: absolute;
    left: 314px;
    top: 319px;
    width: 437px;
    height: 312px;
    z-index: 16;
</style>
<style type="text/css">
#apDiv21 {
    position: absolute;
    left: 273px;
    top: 231px;
    width: 520px;
    height: 23px;
    z-index: 16;
    font-size: 18px;
</style>
<style type="text/css">

</style>
<link href="../SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css">
<style type="text/css">
#apDiv8 {
    position: absolute;
    left: 70px;
    top: 66px;
    width: 1280px;
    height: 41px;
    z-index: 8;
    font-family: Arial, Helvetica, sans-serif;
    color: #000;
    font-weight: bold;
#apDiv2 {
    position: absolute;
    left: 11px;
    top: 213px;
    width: 140px;
    height: 308px;
    z-index: 9;
</style>
<link href="../SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css">
<style type="text/css">
#apDiv3 {
    position: absolute;
    left: 302px;
    top: 321px;
    width: 654px;
    height: 466px;
    z-index: 10;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 14px;
    font-weight: bold;
    line-height: 10px;
    border-top-width: thick;
    border-top-style: solid;
    border-right-style: solid;
    border-bottom-style: solid;
    border-left-style: solid;
    border-top-color: rgb(0,51,255);
#apDiv7 {
    position: absolute;
    left: 2px;
    top: 35px;
    width: 302px;
    height: 326px;
    z-index: 7;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 16px;
    line-height: 5px;
    font-weight: normal;
    color: #666;
#apDiv9 {
    position: absolute;
    left: 270px;
    top: 302px;
    width: 382px;
    height: 295px;
    z-index: 11;
    border: thick solid rgb(0,51,255);
.style12 {font-size: 18pt}
#apDiv7 P FONT {
    color: rgb(0,0,0);
    font-family: Verdana, Geneva, sans-serif;
    font-size: 16px;
#apDiv10 {
    position: absolute;
    left: 4px;
    top: 164px;
    width: 131px;
    height: 293px;
    z-index: 999;
#apDiv11 {
    position: absolute;
    left: 670px;
    top: 298px;
    width: 268px;
    height: 61px;
    z-index: 13;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 18px;
    color: #000;
.container .content #apDiv11 P FONT {
    color: rgb(0,0,0);
#apDiv13 {
    position: absolute;
    left: 134px;
    top: 230px;
    width: 864px;
    height: 551px;
    z-index: 13;
#apDiv14 {
    position: absolute;
    left: 151px;
    top: 252px;
    width: 605px;
    height: 278px;
    z-index: 13;
#apDiv15 {
    position: absolute;
    left: 98px;
    top: 392px;
    width: 1350px;
    height: 496px;
    z-index: 13;
#apDiv16 {
    position: absolute;
    left: 339px;
    top: 249px;
    width: 724px;
    height: 37px;
    z-index: 900;
    border-bottom-width: thick;
    border-bottom-style: solid;
    border-bottom-color: rgb(255,0,0);
#apDiv17 {
    position: absolute;
    left: 50;
    top: 266px;
    width: 620px;
    height: 1;
    z-index: 13;
    background-color: #FF0000;
#apDiv22 {
    position: absolute;
    left: 132px;
    top: 50px;
    width: 40px;
    height: 46px;
    z-index: 1000;
    color: #FFF;
#apDiv23 {
    position: absolute;
    left: -103px;
    top: 340px;
    width: 800px;
    height: 3;
    z-index: 10;
    border-top-width: thick;
    border-top-style: groove;
    border-top-color: rgb(255,0,0);
#apDiv30 {
    position: absolute;
    height: 30px;
    width: 1000px;
    left: -102px;
    top: 288px;
</style>
<script src="../SpryAssets/SpryMenuBar.js" type="text/javascript"></script>

<style type="text/css">
#apDiv16 {
    position: absolute;
    left: 264px;
    top: 326px;
    width: 402px;
    height: 331px;
    z-index: 14;
    border: thick ridge rgb(0,0,255);
</style>
<style type="text/css">
#apDiv17 {
    position: absolute;
    left: 687px;
    top: 324px;
    width: 346px;
    height: 65px;
    z-index: 15;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 18px;
    line-height: 20px;
    font-weight: bold;
</style>
<style type="text/css">
#apDiv18 {
    position: absolute;
    left: 687px;
    top: 392px;
    width: 254px;
    height: 358px;
    z-index: 16;
    font-family: Verdana, Geneva, sans-serif;
    font-size: 16px;
    line-height: 0px;
</style>
<style type="text/css">
#apDiv19 {
    position: absolute;
    left: 214px;
    top: 293px;
    width: 952px;
    height: 375px;
    z-index: 101;
</style>
<style type="text/css">
#apDiv22 {
    position: absolute;
    left: 216px;
    top: 286px;
    width: 906px;
    height: 348px;
    z-index: 17;
#apDiv24 {
    position: absolute;
    left: 70px;
    top: 518px;
    width: 785px;
    height: 113px;
    z-index: 1000;
#apDiv25 {
    position: absolute;
    left: 222px;
    top: 361px;
    width: 115px;
    height: 250;
    z-index: 7;
</style>
<link href="../Spry-UI-1.7/css/SpryImageSlideShow.css" rel="stylesheet" type="text/css">
<script src="../Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryPanelSet.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryFadingPanels.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryImageLoader.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryImageSlideShow.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryPanAndZoomPlugin.js" type="text/javascript"></script>
<script type="text/xml">

</script>

</head>
<body>
<div>Content for New Div Tag Goes Here</div>
<div>Content for New Div Tag Goes Here</div>
<container class="container">
<div id="apDiv1">

<div id="apDiv25">
<ul id="ImageSlideShow">
    <li><a href="../images/bent_shank_wnuts.jpg"><img src="../images/src/bent_shank_wnuts.jpg" alt="" /></a></li>
    <li><a href="../images/champion_rivet_at_operator.JPG"><img src="../images/src/champion_rivet_at_operator.JPG" alt="" /></a></li>
    <li><a href="../images/coining.jpg"><img src="../images/src/coining.jpg" alt="" /></a></li>
    <li><a href="../images/dry_box_workers.jpg"><img src="../images/src/dry_box_workers.jpg" alt="" /></a></li>
    <li><a href="../images/laser_shlomo.jpg"><img src="../images/src/laser_shlomo.jpg" alt="" /></a></li>
<li><a href="../images/lung-blocker-white-gowns.jpg"><img src="../images/src/lung-blocker-white-gowns.jpg" alt="" /></a></li>
</ul>
<script type="text/javascript">
// BeginOAWidget_Instance_2141542: #ImageSlideShow
var ImageSlideShow = new Spry.Widget.ImageSlideShow("#ImageSlideShow", {
    widgetID: "ImageSlideShow",
    injectionType: "replace",
    autoPlay: true,
    displayInterval: 4000,
    transitionDuration: 2000,
    componentOrder: ["view", "controls"],
    plugIns: [ Spry.Widget.ImageSlideShow.PanAndZoomPlugin ]
// EndOAWidget_Instance_2141542
</script>
</div>
<div id="apDiv23"></div>

NOGAH
<div id="apDiv5">Machine Designers & Builders</div>
<div id="apDiv4">smart innovative engineering </div>
</div>

<div id="apDiv15">
<p> </p>
</div>

<div class="header"><a href="#"><img src="../images/logoN.jpg" alt="Insert Logo Here" name="Insert_logo" width="100" height="150" id="Insert_logo" style="color: #F00; text-transform: uppercase; font-size: 40px; font-family: 'Arial Black', Gadget, sans-serif; display: block;"></a>
</div>
<div class="content">
    <div id="apDiv6" style="left: 100px; top: 170px">
      <ul id="MenuBar1" class="MenuBarHorizontal">
        <li><a href="index.html">Home</a>        </li>
        <li><a href="facility.html">Our Facility</a></li>
        <li><a href="about%20us.html">About Us</a></li>
<li><a href="contact%20us.html">Contact Us</a></li>
        <li><a href="#" class="MenuBarItemSubmenu">Medical</a>
          <ul>
            <li><a href="lung%20blocker%20bed%20mounted.html">Lung Blocker Bed Mounted</a></li>
            <li><a href="lung%20blocker%20stand.html">Lung Blocker Stand</a></li>
            <li><a href="couch.html">Radiation Couch</a></li>
            <li><a href="lab%20bench.html">Lab Bench</a></li>
          </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Biotech</a>
          <ul>
            <li><a href="mega%20base%20SH.html">Mega Base Dispensing S.H</a></li>
            <li><a href="mega%20base%20DH.html">Mega Base Dispensing D.H</a></li>
            <li><a href="filling%20machine.html">Liquid Filling Machine</a></li>
            <li><a href="powder%20dispenser.html">Powder Dispensing</a></li>
            <li><a href="capper.html">Capper</a></li>
            <li><a href="laser%20labeler.html">Laser Labeler</a></li>
            <li><a href="racker.html">Vial Racker</a></li>
            <li><a href="dry%20box.html">Glove Box</a></li>
            <li><a href="heat%20seal.html">Sealing Press</a></li>
</ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Polymers</a>
          <ul>
            <li><a href="lid%20stacking.html">Lid Stacking</a></li>
            <li><a href="heat%20staking%20machine.html">Heat Staking</a></li>
            <li><a href="tire%20assembly.html">Roller Assembly</a></li>
            <li><a href="lint%20trap.html">Lint Trap</a></li>
            <li><a href="bosch.html">Dryer Assembly</a></li>
            <li><a href="marbal.html">Cooling Tower</a></li>
            <li><a href="jar%20trimming.html">Jar Trimming</a></li>
          </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Fasteners</a>
          <ul>
            <li><a href="bent%20shank.html">Bent Shank </a></li>
            <li><a href="lug%20nuts%20tapping%20machine.html">Lug Nuts</a></li>
            <li><a href="round%20small%20nuts.html">Rivets Tapping</a></li>
            <li><a href="knurling.html">Knurling</a></li>
            <li><a href="eyebolts.html">Eye Bolts</a></li>
          </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Feeding</a>
          <ul>
            <li><a href="feeding%20with%20vision.html">Using Vision</a></li>
          </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Metal</a>
          <ul>
            <li><a href="champion.html">Rail Road</a></li>
            <li><a href="assembly.html">Assembly</a></li>
            <li><a href="coining.html">Coining</a></li>
            <li><a href="pointing.html">Pointing</a></li>
            <li><a href="damper%20assembly.html">Damper Assembly</a></li>
            <li><a href="fomo.html">Notching</a></li>
            <li><a href="nut%20welder.html">Nut Welding</a></li>
            <li><a href="soundwich.html">Dashboard</a></li>
            <li><a href="water%20pump.html">Drilling</a></li>
            <li><a href="rotor_deburing.html">Deburing</a></li>
          </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">General</a>
          <ul>
            <li><a href="road%20construction.html">Road Construction</a></li>
            <li><a href="large%20hose.html">Large Hose Mfg. Drive</a></li>
          </ul>
        </li>
        <li><a href="IMTS%20show.html">IMTS Show</a></li>
        <li><a href="http://www.yedaengineering.com/">Yeda LLC</a></li>
      </ul>
</div>
<h2> </h2>
    <p class="MenuBarHorizontal"> </p>
    <p> </p>
<p class="style12"> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
    <p> </p>
</div>
<div class="footer">
    <div id="apDiv8">Nogah Engineering 1800 London Road Unit C Cleveland Ohio 44112 USA Tel: 216.738.1730 Fax: 216.738.1770 </div>
    <p> </p>
</div>
</div>
<script type="text/javascript">
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
</script>
</body>
</html>
Thanks.

All these supporting files are missing (404 not found on server).
<link href="../Spry-UI-1.7/css/SpryImageSlideShow.css" rel="stylesheet" type="text/css">
<script src="../Spry-UI-1.7/includes/SpryDOMUtils.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryDOMEffects.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryWidget.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryPanelSet.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryFadingPanels.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryImageLoader.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/SpryImageSlideShow.js" type="text/javascript"></script>
<script src="../Spry-UI-1.7/includes/plugins/ImageSlideShow/SpryPanAndZoomPlugin.js" type="text/javascript"></script>
Upload Spry-UI-1.7 folder to your remote server by clicking the folder and hitting the UP arrow in your Files Panel.
Also, validate your code and fix reported errors. You have unbalanced div tags.
HTML - http://validator.w3.org/
Nancy O.

Validate in expression does not work

Similar Messages

Maybe you are looking for