Validate the variable entry

Hi. VC guru's.
               I would like know some information regarding
Data Validation from you.
                 1) How to validate the variable entry in VC. Example: user should not be able to submit
The queries without selecting a value for all fields.
               and If he enters some invalid values, Then system has to throw an error.
    For Example :: If we give 'Material' name is invalid then the system has to show a system message u201C invalid variable inputu201D .
                 Please tell me how to do it.
          I know that we can give it on validation in control properties. But I would like to know for which
                    field we have to give and what is the condition. Please provide me solution.
               No need to worry about points.
                                                    Thanks and Regards

Hi,
You had asked To which filed we have to give and what condition Right?
For which field you want to validate Enter the validation that Filed and The conditions are according to the your requirement.
For Example.
In a Input if you Enter any input which Ends with 5 then it should show some Error message
then you have to Use "Ends with" Option as Condition and "5" as value , Message " Ends with 5"
If you Upgrade to EHP1 then you can get the Hard validation option which will stop the Execution Flow if the validation validation fails
Thanks
Govindu

Similar Messages

How to link the variable entry with the planning function execution

Hi All,
I am new to IP , we have a requirement where the user enters the value 2008 for a variable year. Then we are supposed to copy the same combinations for the next four years against which the user will be able to input the key figure values. But i have only 2008 data in the cube, so i need to generate new records for the same characteristic combinations as present for 2008 for the next four years. I am planning to use a copy function for this but how can i trigger this planning function once the user enters the value for the year variable. I want the planning function to get executed once the user clicks OK after the variable entry. Request your valuable inputs on the same.

Hi Tilak,
for this u have an option of executing the planning sequence when the web template loads ie. after the variable screen.
open the WAD.
go to the properties of Web Template web item. Under the section standard action of the webtemplate, we have a n option to include planning functions under action before rendering.
If u include your planning sequence in this this will get executed every time the layout loads.
guess this is usefull to u.
Regards.
Shafi.

InfoObject does not default to "C" on the variable entry scre

Hello Guys,
In my workbooks the InfoObject does not default to "C" on the variable entry screen, even though the variable is set to do so.
Does some one know the reason.
help me.
Thanks in advance
Issue sent to SAP Waldorf
Edited by: rama devi on Apr 2, 2008 5:13 PM

Thanks for the advice.
The problem is some times its working and sometime its not working.
so dont know what to do. thats why issue sent to SAP Waldorf

Changing the heading in the variable entry screen

Hi,
I have the varible entry in my web template where in the user enter the starting year and ending year .The heading of the Variable entry screen is defaulty Variable entry I wanto change the heading from Variable entry to Years
In 3.5 WAD what ever description is assigned to the webtemplate appears as the heading for variable entry scree but this is not happening in 7.0
Pls let me know how can this be done
Thansk
Sany

Hi Satyajit,
Since the variable entry screen orignates from the BI system in conjunction with a web template it cannot be invoked separately. Do you plan to run the web application within a Web Dynpro application (i.e. an iFrame)? One option would be to use the BI Java SDK to populate the values in a user selection screen and then use the user's selection to execute a query or MDX statement. Of course you Web Dynpro app is responsible for rendering the result set.
Regards,
Oliver

Changing the variable entry screen in web?

Hi
I have copied and amended the standard web template and that's all fine. I now have a requirement to change the design of the variable entry screen. I need to be able to show the name of the query that has raised the variable screen. Is this possible? Can I change a different web template to achieve this?
Many thanks
Trish

Hi,
I need to do the same, were you able to display query name on variable entry screen, please share how you managed to solve this ?
Thanks in advance...

Adding messages to the Variable entry screen in web report

I need to add a message or note to the variable selection screen on a web report. I need this message or note to be displayed somewhere on the same screen with the variable list. I found something similar in BW Expert regarding pop-up messages, but this does not work with web templates. Does anyone know of a way to add a static (or dynamic) message to this initial screen of a web report?

In my clients place, they are ready to do the SAP Mod based on "CL_RSR_WWW_VARIABLE_SCREEN" to have a Alert Message which sort of based on different idea.
Does anyboay have an idea on where to make the change?
Thanx
Arun

How to validate the table entries without zprogam

Hi Guru's
    I'm having a table in that table have 4 fields ie pernr, name, date and time.
     if entered the pernr nand name the remaining 2 fields is automatically populated in SM30.
     i added one include in the function group.
Thanks & Regards,
Vallamuthu.M

tried searching in SDN its a nice forum to search things... look what i found though searching..
[table maintenance events|http://help.sap.com/saphelp_470/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm]
[wiki one|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=93454609]
[wiki2|http://wiki.sdn.sap.com/wiki/display/ABAP/ExtendedTableMaintenance+Events]

Variable entry issue when the query is executed on the WEB

Hi,
       When I execute a 2004S query on the WEB,In the variable entry screen , even if I specify for example 'A' for a variable , the 'A' is completly ignored and it returns all the values.So there is a problem with '*'.
        If I execute the same query in the Analyser, '*' is considered while returning the results.
        Anyone having similar issue.
        Thanks in advance.

Hi siva,
Its a program error. Please apply the advanced correction from SAP note <a href="https://service.sap.com/sap/support/notes/1062214">1062214</a>
Assign points if helpful,
Regards, Uday

How to show all the user entry variables in a workbook.

Hi,
My user need to see in the workbook all variables he had entered in the variable entry popup at the openning of the workbook.
I know how to show all the variables, included the hardcoded variable in the query (with a text element, select the checkbox "Display All Statics Filters"), but I need only the user entry variables.
There is a way to print only these variables?
Thank you

Thanks, but the problem is that this workbook is my Global default workbook used for all the queries. So I only want the user entry variables visible automaticly.
There is a way to do that ?
For information, i'm using Netweaver 7.
Thank you

Web-based BEx: How to display a customized message on the variable screen??

Hi All,
I'm now using the web-based BEx. Recently I want to display a customized message (e.g. the usage of the report) on the first page (i.e. the variable entry screen) of the query. Is it possible?
Thanks.
BR,
M. Ng

Hi marco,
Check here. itmay help you.
Custom Messages WAD
Thanks,
Vijay.

How to add customize message on the variable selection screen in the query

Hi all,
Can we add an customise message on the variable selection screen in the query? If yes please let me know how it can be achevied?
Thanks,
Rani

Hi Rani,
I faced a similar issue (for what I understand your request is).
My requirement for the Variable Screen was to do:
1) place a link to a ppt file
2) remove buttons "Save", "Save As...), "Delete"... the standard buttons come when running the Query or WebTempl
We were using a Web Templ for BI7.0
I struggled trying to find out how to do it. My conclusions are:
- WAD, not sure we can accomplish it using a Web Template but i did not "play" a lot with the Web_Template Properties in order to know
- XHTML, I was told in my post HTML modification was the way, but I have close to nil background in HTML and couold not find the way of accessing the Variable Entry screen
For instance, I had to remove similar buttons and change some font size from a link on the Web Template (WAD), which was pretty straight forward. In WAD the buttons come with its own icon and to increase the Font size for that link we used XHTML (<font size="2" >). But the heck of the variable screen...well, i just did not get trhough to it to modify it in any way.
Good luck,
Definetly in a Query I would say that no.
alex
PS: If anyone had a better insight, please feel free to share it.

How to find out the variable using in the system.

Hi Friends,
When I am trying to create a new variable for a infoobject. It is giving me a warning that Change the tecnical name 'New Variable.....' Before save
This is not allowing me to create any new variable.
In the system I find out one variable is there with the name 'New Variable.....'
And It is being used some where. When I am trying to delete this variable it is giving me a msg that it is being used in ZSCEMESTS.
But I am not able to find out where this ZSCEMESTS is exists.
Is there any TCODE for find out this object.
I want to delete this New Varable..... So can any body pls provide me the solution?
Regards,
Sridhar

Hi Sridhar.
Can you please tell me, is the variable entry mandatory? If yes please make the variable entry is optional.
Hi Sridhar,
Can you please tell me which type of variable it is? On which object this variable built?
Variable is available global level, so you can view this variable on the same object right click restrict --- variable --- select --- delete.
If it though it is already used in another query then use where used list then go to respective query and delete the same.
Regards,
Lokanatha.

Issue with Variable Entry in BI 7.0

Hi,
I am having an issue with the variable entry in BI 7.0 Version. Here is a brief background.
--- In BW 3.x, when we define a variable with <b>Single Value Option</b>, you can enter the value manually in the pop-up selection screen or select from the dropdown of possible values.
---But in 7.0 when i try to enter the value manually in the selection screen its opening the dropdown list, and is not giving me the option to enter a value manually. I am entering a valid single value in selection.
Is this a bug or do i have to make any specific settings to correct my issue?

When the selection screen pops up choose the KEY only function on the TOOLS on the top right corner of the screen. Then you will be able to enter the values manually.
Hope this helps.

Variable Entry Style Sheet (CSS)

The Web template uses the style sheet from the MIME repository:
<link href=/sap/bw/mime/BEx/StyleSheets/BWReports.css type=text/css rel=stylesheet>
But, when the variable entry screen is displayed when executing the query it is not formatted and uses this style sheet:
<link rel="stylesheet" href="OWNER">
What is missing or needs to be configured so that the variable entry page uses the same style sheet as the Web template?
Thanks for the help in advance.

i had ot type out in the file:css in order for it to be imported into DW i dont know why its doing that.
Did you define a local site folder in DW before you begain your project?
http://help.adobe.com/en_US/dreamweaver/cs/using/WS753df6af718a350a60097e0f131686fa2b4-7ff e.html
This critical first step allows DW to manage your site links and assets for you. Without a local site folder definition, many of DW's advanced features won't work.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

Variable entry screen for query doesnt show selection values.

Hi,
I've created a query with date varibale Quarter From-To. When i execute this query, the variable entry screen pops up but when i try to select values just shows ??? and not the text.
if i run the same query in RSRT the variable entry screen pops up but here the selection values are present for me to choose from.
can anyone tell why the values arent showing when the query is executed.
Thanks

yes, it seems to be a problem with NetWeaver BI BEx Java Web runtime as it works in RSRT and web analyzer. Found a note on marketplace note 125357 - No values displayed for attributes in input help but this did not resolve issue.
A call has been raised now as it seems to be a product fault

Validate the variable entry

Similar Messages

Maybe you are looking for