Validation Errors on TabPanel - How do I show them to user?

I have a tabbed panel on one of my JSF pages with required=true validation on field on tabs other than the first tab. When the user does not fill in those required fields on tabs other than the first one, those field level error messages are not shown because the screen renders showing the first tab. Is there a way to switch the focus to whatever tab has validation errors, so the user can see that they missed filling in information? Right now, they just get a screen flicker and don't know what happened.
Thanks,
MIke BRubaker

It plays fine on a computer,
Are you saying the burned disk plays fine on your computer?
Happy Holidays

Similar Messages

How to hide/show dashboards for user/groups

Hi,
Please help on how to hide/show dashboard menu/sub menu to users/groups based on their profile settings.
thanks in advance.
regards,
kumar.

Hi Jinu,
1) Do some or all of those subreports span multiple pages?
2) Do each of the Subreports start on a new page?
If yes, for both, then here's what you need to do:
1) Create a formula (@True) with this code:
shared booleanvar SetStatus:= True
2) Create another formula (@False) with this code:
shared booleanvar SetStatus:= False
Drag and drop the @True formula on the details sections for which you want the Page Footer to be suppressed.
Similarly, drop the @False formula on the details sections for which you want the Page Footer to show up.
Then, go to the Section Expert > Select Page Footer c > Click the formula button beside Suppress and use this code:
shared booleanvar SetStatus;
-Abhilash

AirPort Disks - how do I show them in Menu Bar and Mount them

I have two hard drives connected, through a USB hub, to my AirPort Extreme Base Station. The AirPort Disk Utility has options to "+Automatically discover AirPort Disks+" and +"Show AirPort Disks in the menu bar+". I have checked both options.
Neither of my Base Station-connected disks shows up in the menu bar, and neither is automatically connected. They both appear in Airport Utility. They do not appear in Disk Utility.
I cannot figure out how to connect to/mount these disks.
Thanks for any help.

I think you are describing a feature of the Airport Disk Utility.
I stopped using this when Leopard came out.
Instead I have my airport shared director in the finder sidebar.
Click on it ... and it mounts.

Field Exit - How do I show list for user to select?

Hi,
I am writing a field exit for Group Asset on TCode AS01. The field exit will check a custom table to give the user an option to select values from a dropdown list.
Any suggestions on how to do this? I understand how to force a value in the field by putting it in OUTPUT, but not sure how to allow the user to select from a list?
Thanks!!!

Thanks for the replies!
I'm not sure how to attach a search help to it because it is a field on a standard SAP screen that already has a search help.
This is probably not going to be very clean, but let me give more details as to what I'm trying to accomplish.
There is a field "Group Asset" that is on t-codes AS01, AS01, AS11. There is already a search help provided by SAP. The functional person wants me to create a field-exit to check a custom table based on Company Code, Cost Center, and Asset Class importing PIDs. If there is only one group asset that fits the criteria, then I will just place it in the field. If there are multiple group assets, then the user has to select which one and place it in the field.
I appreciate any suggestions. Thanks!!!
Mark

Where do I find NI-CAN error messages and how do I interpret them?

I have the following error when using ncWait.vi: BFF62125. I am using NI-CAN 2.1.1. Can you tell me what this error means, in detail? Also ? I cannot find the error and status information in the NI-CAN 2.1.1 NI-CAN Hardware and Software manual. Can you tell me where I can find this type of information for NI-CAN 2.1.1?

There are 2 ways to find out.
1. use the utility that installs with NI-CAN. check out this link for details.
2. Use the NI-CAN programmer reference specification. This is a downloadable document for NI-CAN 2.0 and earlier.
or search NI for the following part number: 370289C-01
>>

How can I get anyones address book from ecxhange and show them to user

I am trying to get someones adressbook information from MS exchange for caller to be able to make call from IP Phone interface. Is there any rapid solution.

First you must import them to your computer, and then sync your iPhone to your computer.
http://www.juliakm.com/transferring-aol-address-book-apple039s-address-book
http://email.about.com/od/windowslivehotmailtips/qt/Export_Contacts_Email_Addres ses_from_Windows_Live_Hotmail.htm

Validation Error not showing properly for a textfield

Hi,
I have a text field as a column of the table. When I focus out of the text field, the field becomes red due to validation error. But it doesn't show the validation error message.
When you click on the field which is red, it shows the error msg as a bubble or when you try to save the record, the error msg popup shows up.
Now, I want the user to see the error message as soon as he tabs out of the field, does any one know how to achieve this ?
Thanks,
Akshay

Akshay,
Always mention your JDev version.
Have you tried adding an af:messages tag for your page and set the inline property of that to true?
-Arun

Customizing validation errors

First of all I want to take moment in conveying my thanks to each and everone who helped me several times and who spend a lot of their valuable time in helping other developers like me.
Here's my question:
When the validation errors show up in the notification, they are formatted with yellow triangles. (apex 3.2). How can I remove these yellow triangles?
I have a page level validation which throws multiple lines of error messages. I want them all to be a bulleted list.
So, basically I want all item and page level (which may be more than one line of errors)error messages to be a bulleted list.
How can it be done?
If bulleted list is hard, then I would atleast like to get rid of yellow triangles because they don't work good for page level validation which throws multiple error messages. Each traingle indicates one error which may not be the case when my page level validation fails.
Thanks for looking into this thread,
RN

Thanks Jari for prompt reply.
Your solution worked by putting code in page html header section. Yellow triangles got replaced with bullet points.
Can you please direct me where you found the code
li {
list-style-image: url(Bullet.gif);
}My actual problem is more complicated. Changing bullets did not solve what I want. I did not describe my problem properly earlier and got carried away in wrong direction.
I would like to explain again what I want:
All validation errors show up as a bulleted list. Each bulleted point shows one validation error. But I have a page level validation that checks multiple business rules and throws error lines like this:
Product Category should be defined. <br>
Product needs atleast two approvals before moving it to next status.So far, these both error lines show under one bullet because it is result of one validation failure. But I want there two lines to show up under two different bullets because these are two errors.
If I can't show them this way, then I don't want any error message to be bulleted because bullets will give user wrong impression about number of errors.
I do want all error messages(from all different validations) show up in new line for the readilibility.
Hope I explained my requirement better this time.
Thanks,

Report Still Runs When Validation Errors Occur

Hello.
I'm using Apex 4.2.1 against Oracle 11gR2 and Oracle App Server (mod_plsql).
My Set-Up:
I created an application containing a "classical" type report that is driven by a WHERE clause. I also have two date fields in an HTML region on this same page. These fields are used in the report WHERE clause. And the report is run by clicking a GO button on the page.
Here's what the WHERE clause looks like:
where table_date >= to_date(nvl(:P1_BEGIN_DATE, '01-jan-1900'), 'dd-mon-yyyy') and table_date <= to_date(nvl(:P1_END_DATE, '31-dec-2300'), 'dd-mon-yyyy')This is designed so that, if any of the date fields are NULL, then the minimum or maximum date will be used for the query.
These date fields should always have a value when the report is run, and so, I created two after submit NOT NULL validations, one for each of the date fields. If any of these fields is NULL when the GO button is clicked, an error message appears in the notification area at the top of the page.
Looking at all this, you might realize (as I do) that the nvl() functions in the above WHERE clause are redundant. After all, the validations are supposed to prevent these date fields from becoming NULL when the report is run. In any case, this set-up does work ok and points out a strange behavior with Apex.
My Problem:
If any of these validations throws an error message, the report still runs. In previous versions of Apex, if a validation (or, for that matter, any error) is thrown, the report remains static. The report region does not disappear and the report is not invoked until the user corrects the error.
If both date fields are filled, I click the GO button and the report correctly returns, say, 100 rows. But when I empty both of the date fields and click GO, the validation errors appear and the report still runs, now returning the maximum number of rows, say, 1000.
What I've Tried:
I added a Branch-to-Page with condition "No Inline Validation Errors Displayed" so that the page branches back to itself only when no errors appear inline and I changed the validation error messages to appear inline. This has no effect.
And if I remove the nvl() functions from the above WHERE clause, then, when validation errors are thrown, the report data is replaced with the "No data found" message. All very disconcerting to my users.
Does anyone know why Apex reports are still run in presence of validation errors?
And how do I get around this behavior?
Thank you for any help.
Elie

Hi, Scott.
Thank you for your help/suggestions.
I like your first suggestion: creating a DA on the GO button that causes my report region to refresh only if both begin and end date fields are populated. And so, I tried doing this.
My DA looks like:
Event: Click
Type: Button
Button Name: P1_GO
Condition: - No Condition -
Action: Refresh
Fire When Event Result Is: True
Fire On Page Load: Checked
Selection Type: Region
Region Name: People Count
Event Scope: Static
Condition Type: PL/SQL Function Body Returning A Boolean
My PLSQL Code in Expression 1:
IF ( (:P1_BEGIN_DATE IS NOT NULL) AND (:P1_END_DATE IS NOT NULL) ) THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;My P1_GO button was automatically changed to "Controlled by Dynamic Action". And "Execute Validations" for this button is set to "Yes".
Unfortunately, this DA does not work. When both date fields are filled, clicking the GO button does not cause the report (nor anything else) to refresh. However, if I navigate to another application tab and then return back to my report page, I notice that the report does refresh at that point. But clicking the GO button has no effect.
And when either or both of the date fields is NULLed, clicking the GO button does not cause my validation error messages to appear.
By the way, I do agree with your comment about the NVL() functions. As I had mentioned in my original post, I also realize that, with my WHERE clause, checking for NULLs in my date fields is not needed. Still, if users fail to fill these date fields, then it would be useful to remind users that these fields should be populated. This is why having the validation checks are still needed despite my WHERE clause.
In any case, would you know what I am doing wrong here with this Dynamic Action?
Also, with respect to my first question, why is Apex causing my report to refresh when validaion errors have occurred? This did not occur prior to version 4.2.
Thank you very much for any further help/advice.
Elie

I recently updated my iphone and lost all my media and contacts as my computer did not save them how do i get them back

i recently updated my iphone and lost all my media as my computer did not have enough memory to restore and an error occured. How do i get them back.

Media and contacts are NOT part of the iPhone backup. Media should already be in your iTunes library and contacts should be in whatever address book or cloud service you were syncing them to. Just re-sync them to the phone.

XSchema: How to get (more) Information about validation errors?

I changed the file car.xml to have an invalid xml-file, then
i validate the demo car.xml using the demo programm xsdtest.
I got the following error message:
In line 7 of car.xml:
LSX-00290: invalid enumeration choice "Hugo"
LSX-00213: only 0 occurrences of particle "sequence", minimum is 1
Validation failed, error 213
The first 2 lines are dumped from the SchemaProzessor. Unfortunatly there is no
possibility to get this information with a methodcall or by return value
to use for further processing!
The only thing i got controlled back is the error code 213.
But how do i get the correspondening errortext ? What means error 213 ?
So here is my suggestion:
Please give accurate information about validation errors! Including:
1) The position where the error occurred. (maybe in XPath notation)
2) An error Number to classify the error (Including a possibility to resolve the errormessage via program.)
3) An error text for the specific case : (for example : invalid enumeration choice "Hugo")
Please give this information in a struct back or provide methods on the
Xschema prozessor.
Otherwise the XSchema support is useless!!!!!
Sorry for my bad English & Greetings
Martin Frenzel
By the way: The XDK for Java uses a different Error Messages !!!! But there is the same problem...

1.How to check when user last time login to database.AUDIT
2.If user account is lock why it is locked? if it is locked by trying to loing with wrong password how to check how many times he attempted with wrong password...and other reasons alsoCheck Profile For this user and attr.
3.Wheni was trying to select user expire date it is showing empty value...can we check expire date through querys or we need to check profile?
SQL> select EXPIRY_DATE from dba_users ;
EXPIRY_DA
24-SEP-11
24-SEP-11
24-SEP-11
24-SEP-11
24-SEP-11
24-SEP-11
24-SEP-11
23-MAY-13
24-SEP-11
24-SEP-11
24-SEP-11 check
expiry_date in dba_users is null
4.How to check when he was reset his password last time.SELECT PTIME FROM SYS.USER$;

How to deal with validation errors from DAO layer.

I have been pondering on how to deal with validation errors from DAO layer.
Lets say you have a DAO that can save a car object. A car has a year, make, model, vin and so on. During the save operation of this DAO, it validates the car attributes to see if they pass some business rules. If it does not it throws some validation exception that contains all the validation errors. These validation errors know nothing about jsf or my components it just knows what attributes on the object are invalid and why.
If I just want to show those errors at the top of the page that would be no problem I could just create some FacesMessage objects and add them to the FacesContext messages. But if the DAO layer is telling me that the make attribute is invalid it would be nice to map it to the make field on the screen. I am wondering if any of you have tackled this problem or have some ideas on how to tackle it?
Brian

Let it throw an exception with a self explaining message, then catch it and embed that message in a FacesMessage.
Or let it throw more specific exception types (InvalidCarMakeException extends CarDAOException and so on) and let JSF handle it with own FacesMessage message.

How do you resolve Financial Management service validation error in EPM ?

Does anyone know how to resolve Financial Management service validation error from EPM Diagnostic Report?
Environment:
Quad-Core AMD Processor 2.2 GHz (Server Machine)
5 GB RAM
Server 2003 Standard 32-Bit SP2 (also tried in Enterprise)
Application Server:
WebLogic Server 9.2 Custom Installation (with Add-Ins)
http://www.oracle.com/technology/software/products/ias/htdocs/wls_main.html
Database:
Oracle 10gR2 (Standard Installation per step-by-step guide from Oracle)
http://www.oracle.com/technology/software/products/database/index.html
Hyperion EMP System 11.1.1.3:
Installer
Foundation Services (4 Files )
EMP Architect
Financial Management, Planning, Financial Reporting and Web Analysis (primarily interested in FM)
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
The following are the sequences of steps carried out during the Installation and Configuration of EPM:
1)     Installed the Server along with its respective SP2 – Shutdown the machine
2)     Assigned IP and DNS addresses
3)     Installed Window components by ticking Application Server Console, Enable COM+ access, IIS and DNS
4)     Run “dcpromo” to create a Domain Controller with default values and assigned a domain name – Shutdown the machine
5)     Installed Weblogic Server 9.2 and configure it using Configuration Wizard – Selected “test environment” and ticked default “listening port” – Shutdown the machine
6)     Basic installation of Oracle Database 10gR2 using Step-by-Step guide provided by Oracle and carried out Password Management steps. After installation, I then created a user “oracle” and assigned it to ora_dba User Group with the required Local Security Policies – “log on as a batch job” and “Act as part of operating system”
7)     Logged into database and acknowledge the licensing window – Shutdown the machine
8)     Restarted the machine and checked all relevant and newly installed Database and WebLogic services are running.
9)     Started Installing EPM components by double clicking “InstallTool.cmd” and selected all relevant components at ONCE as per Installation Guide – Result: - All selected EPM components were successfully installed without errors or exceptions
10)     At the end of installation window, I carried out the configuration in the following scearios:
Scenario 1: Configuration all at Default settings
Scenario 2: Configuration all, except “Application Server” I selected the WebLogic9.2
Scenario 3: Configuration all, except “Application Server” and “Workspace Web Server” were being Welogic9.2 and IIS HTTP
RESULT: After all numerous installations, all came down to ONE ERROR from “Diagnostic Report” stating the following:
Financial Management:
FAILED SVR: HFM Service Validation Check if HFM service in working state.
Error: Error message: <03/11/2010 05:32:26 PM> CreateApplicationCAS... Failed at line: 2
Recommended Action: Make sure HAT utility is working. 1 s
I then simply ignored this error and tried to deploy an Application, all worked fine until you get to the point at “Job Console” where you need to press “Refresh” button. Progress remained at 12% until it got timedout after 300 seconds and force attempt of refreshing resulting in “aborted” job with the following error:
Error Reference Number: {DB3940F5-2D4A-46AB-A370-77F82F121BBA}
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:39:58 PM;Svr: PBAR;File: CHsvDataSourceImpl.cpp;Line: 196;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1276;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: CHsxServer.cpp;Line: 1190;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 0;DTime: 4/12/2010 4:40:07 PM;Svr: PBAR;File: AgentHelper.cpp;Line: 728;Ver: 11.1.1.3.0.2413;
Num: 0x8000ffff;Type: 1;DTime: 4/12/2010 4:40:08 PM;Svr: PBAR;File: CHfmAwbAgent.cpp;Line: 744;Ver: 11.1.1.3.0.2413;
This is, I believe preventing me from deploying Consolidation Apps, including Sample Application provided with EPM Downloads. I have tried installing and configuring by components. All failed with the same outcome.
I have been working on this effortlessly in different combinations to get at least one Financial Management Application get deployed so I could enhance my learning adventure. As it stands, I am not sure where to get help and completely lost in the World of Oracle. I am also come to wonder whether “Free Downloads of EPM” are indeed, is “complete and is in working-state” or do I need a licence to use for personal learning experience? Are there different downloads for different needs or/users For example, eDelivery downloads are different from OTN Agreement downloads?
I have downloaded the files from following URL:
http://www.oracle.com/technology/software/products/bi/performance-management/index.html
I am completely lost and all services are up and running and not sure what I am missing!! Any assistance will be greatly appreciated.
Many Thanks
BT
Edited by: user8973921 on 13-Apr-2010 05:08
Edited by: user8973921 on 13-Apr-2010 10:56
Edited by: user8973921 on 14-Apr-2010 02:30

I am having exactly the same problem using Windows 2003 Standard editions SP2. Is there anyone who knows a possible solution for this? The effect on HFM is that is not possible to create an application, since I always get an error that says "Server execution failed"
Error Reference Number: {E68F87E6-588E-4665-862C-AAB02CB299DA}
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServerImpl.cpp;Line: 3522;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 1115;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxServer.cpp;Line: 857;Ver: 11.1.1.3.0.2413;
Num: 0x80080005;Type: 0;DTime: 12/3/2009 5:21:47 PM;Svr: KINGTUT;File: CHsxClient.cpp;Line: 2106;Ver: 11.1.1.3.0.2413;

How to delete empty row without validation error in ADF Table(EMP)

Hi Everyone,
I am using EMP Table in ADF jspx page to insert the data into database.when i insert a row into table by createInsert operation,it inserting the row.But I need to delete that row immediately with out entering any value.
But it showing some validation error at empno.Is there any ways to delete the empty row?if not,what are the reasons that we can't delete the row.
could any one tell me the reasons!!
Thanks in advance!!
With Best Regards,
Amar
Edited by: 973755 on Dec 11, 2012 6:42 AM

Amar,
I am little confused with your logic here.....
but if you are trying to remove the row by clicking Remove button, you can set the immediate property to true and that remove function will run without executing any entity validation.......
-R

How to track a validation error in PL/SQL

Is there a way in PL/SQL to track the fact that a page is rendered after a validation error?
I know there is condition type "Inline validation errors displayed" but
I would like to "translate" in PL/SQL expression. In case I would combine it with other PL/SQL expressions.
Thanks,
Marco

I try to show/hide a div depending on the occurence of errors. I resolved this problem by doing this in javascript.
function showEdu(){
$("#edu").animate({ height: 'show', opacity: 'show' }, 'slow');
$s('P6_EDU_SHOWN','Y');
function hideEdu(){
$("#edu").animate({ height: 'hide', opacity: 'hide' }, 'slow');
$s('P6_EDU_SHOWN','N');
function checkEduError(){
if($("span").hasClass("errTxt") == true)
{showEdu();}
else
if($v('P6_EDU_SHOWN') == 'Y')
{showEdu();}
else
{hideEdu();}
}

Validation Errors on TabPanel - How do I show them to user?

Similar Messages

Maybe you are looking for