Validation Exception-Error Code 7001

I get this error when I am accessing a method which uses a toplink API:
"LOCAL EXCEPTION STACK:
EXCEPTION [TOPLONK-7001] (Toplink - 4.0.2 (Build 348)):
com.webgain.integrator.exceptions.ValidationException
EXCEPTION DESCRIPTION DESCRIPTION: You must login to the ServerSession before acquiring ClientSessions"
I am trying to use some code that has been used and therefore tested before. Basically...I just want to familiarize myself with Toplink....bt for the past 2 days...I cannot figure out what is wrong.

If your login configuration in your sessions.xml has the user name and password provided then it should be used in the properties when acquiring the connection.
Doug

Similar Messages

  • Page Fault Processor Exception (Error code 00000004) GWIA

    About every 24 - 36 hours GWIA aneds and unload GWIA from its address
    space
    Running 8.01 (with patches) on NW65 sp8 (with patches)
    Novell Open Enterprise Server, NetWare 6.5
    PVER: 6.50.08
    Address space GWIA removed Monday, April 12, 2010 11:53:27.355 am
    Abend 0 on P00: Server-5.70.08: Page Fault Processor Exception (Error
    code 00000004)
    Registers:
    CS = 001B DS = 0023 ES = 0023 FS = 0023 GS = 0023 SS = 0023
    EAX = 00000000 EBX = CA56C50C ECX = CA56C50C EDX = CA5CA998
    ESI = CA5CA998 EDI = CA56C1EC EBP = CA56C4C8 ESP = CA56BBF8
    EIP = F530E65E FLAGS = 00010246
    F530E65E 66AD LODSW
    EIP in LIBC.NLM at code start +0009465Eh
    Access Location: 0xCA5CA998
    The violation occurred while processing the following instruction:
    F530E65E 66AD LODSW
    F530E660 84C0 TEST AL, AL
    F530E662 7503 JNZ F530E667
    F530E664 AA STOSB
    F530E665 EB06 JMP F530E66D
    F530E667 66AB STOSW
    F530E669 84E4 TEST AH, AH
    F530E66B 75F1 JNZ F530E65E
    F530E66D 8B44240C MOV EAX, [ESP+0C]
    F530E671 5E POP ESI
    Running process: Server 00:35 Process
    Thread Owned by NLM: SERVER.NLM
    Stack pointer: CA56BBF8
    User Space Stack limit: 0
    Scheduling priority: 67371008
    Wait state: 50500F0 Waiting for work
    Stack: --CA2F5820 ?
    --C0E5BC80 ?
    F44B6290 (GWIA.NLM|ImapEngineCallback+9BC)
    --CA56C1EC ?
    --CA5CA998 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --CA5CA8B0 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --C8FE5EC0 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --CA56C50C ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --C1D45DC0 ?
    --C9BF50C0 ?
    --C9BF50C0 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    Additional Information:
    The CPU encountered a problem executing code in LIBC.NLM. The
    problem may be in that module or in data passed to that module by a
    process owned by SERVER.NLM.

    that's all that's in the ABEND log .... for each of the times that the
    GWIA unlaods
    The system doesn't actually abend - it just unloads the GWIA from the
    protected memeory space
    ataubman wrote:
    >
    > You haven't given us the modules list so we can't see what versions
    > you have. This problem should be fixed in GW 8 SP1 HP1.

  • Page Fault Processor Exception (Error code 00000002)

    We have begun to experieince the following abend on our Netware 6.5 server running GroupWise 8.
    Novell Open Enterprise Server, NetWare 6.5
    PVER: 6.50.08
    Server halted Wednesday, December 8, 2010 8:08:15.459 am
    Abend 1 on P02: Server-5.70.08: Page Fault Processor Exception (Error code 00000002)
    Registers:
    CS = 0008 DS = 0023 ES = 0023 FS = 0023 GS = 0023 SS = 0010
    EAX = 78DBF1DC EBX = 6D86C060 ECX = 00446A97 EDX = FCAEF520
    ESI = 6FF57EE0 EDI = 7B4AB000 EBP = A067C9A0 ESP = A197F668
    EIP = 8038B5D8 FLAGS = 00010202
    8038B5D8 F2A5 **REPNE* MOVSD
    EIP in LIBC.NLM at code start +000945D8h
    Access Location: 0x7B4AB000
    The violation occurred while processing the following instruction:
    8038B5D8 F2A5 **REPNE* MOVSD
    8038B5DA 2403 AND AL, 03
    8038B5DC 8AC8 MOV CL, AL
    8038B5DE F2A4 **REPNE* MOVSB
    8038B5E0 8B44240C MOV EAX, [ESP+0C]
    8038B5E4 5E POP ESI
    8038B5E5 5F POP EDI
    8038B5E6 C3 RET
    LIBC.NLM|memcmp:
    8038B5E7 57 PUSH EDI
    8038B5E8 56 PUSH ESI
    Running process: GWIMAP-BCC_-Handler_2 Process
    Thread Owned by NLM: GWPOA.NLM
    Stack pointer: A197F418
    OS Stack limit: A19711C0
    Scheduling priority: 67371008
    Wait state: 3030070 Yielded CPU
    Stack: --038068DC ?
    --78DBF180 ?
    90246CD4 (THREADS.NLM|realloc+B8)
    --78DBF180 ?
    --6D86C060 ?
    --038068DC ?
    --03806900 ?
    --00000001 (LOADER.NLM|KernelAddressSpace+1)
    --038068DC ?
    --A197F6A8 ?
    --00000100 (LOADER.NLM|KernelAddressSpace+100)
    --475BE354 ?
    A046BF23 (GWENN5.NLM|GWENN5@_WpmemRealloc+13)
    --6D86C060 ?
    --03806900 ?
    --475BE340 ?
    --A197F6C4 ?
    A045F6BA (GWENN5.NLM|GWENN5@?GetHandle%NgwBufIStream%%QAEKP APAX%Z+2BA)
    --03806900 ?
    --475BE354 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    -9AD5EF0C (GWENN5.NLM|GWENN5@??_7NgwBufIStream%%6B%+8)
    --4C60D600 ?
    --A197F6F4 ?
    9FC3E61B ?
    --4E457B00 ?
    --00001FFC (LOADER.NLM|KernelAddressSpace+1FFC)
    --A197F6DC ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00001FFC (LOADER.NLM|KernelAddressSpace+1FFC)
    9FBBAD00 ?
    --44DC2080 ?
    --4C60D600 ?
    --44DC2080 ?
    --A197F980 ?
    --A197F704 ?
    9FC3E425 ?
    --475BE340 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --A197F71C ?
    9FC2EBAD ?
    --475BE340 ?
    -9F31FACD ?
    -9F31F957 ?
    --A197F980 ?
    --A197F73C ?
    9FBBA181 ?
    --44DC2500 ?
    --00000002 (LOADER.NLM|KernelAddressSpace+2)
    --0006F734 ?
    --44DC2500 ?
    -9F31F957 ?
    --A197F980 ?
    --A197F750 ?
    9FBBB830 ?
    --44DC2500 ?
    --A197F980 ?
    -9F31F957 ?
    --A197F764 ?
    9FBBA640 ?
    --44DC2500 ?
    -9F31F957 ?
    --A197F980 ?
    --A197F78C ?
    9FBBA5B5 ?
    --44DC2500 ?
    --A197F78C ?
    --B18F2280 ?
    --B18F2320 ?
    --439CE400 ?
    -9F31FAF9 ?
    -9F31F957 ?
    --A197F980 ?
    --A197F7AC ?
    9FBBA143 ?
    --44DC2400 ?
    --A197F980 ?
    --0008EBC0 ?
    --44DC2840 ?
    -9F31F957 ?
    --A197F980 ?
    --A197F7C4 ?
    9FBBA6EE ?
    --475BEBC0 ?
    --4B23E4C0 ?
    --A197F980 ?
    -9F31F957 ?
    --A197F7D8 ?
    9FBBA024 ?
    --475BEBC0 ?
    -9F31F957 ?
    --4B8595AE ?
    --A197F9DC ?
    9FB85D78 ?
    --44DC2300 ?
    --00000067 (LOADER.NLM|KernelAddressSpace+67)
    --B18F2F60 ?
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --00000000 (LOADER.NLM|KernelAddressSpace+0)
    --4B859F60 ?
    Additional Information:
    The CPU encountered a problem executing code in LIBC.NLM. The problem may be in that module or in data passed to that module by a process owned by GWPOA.NLM.
    Emulated 5000 and found no RET instruction
    Function may never return.
    We are running GW 8 SP 1 on a Netware 6.5 SP 8 OS. I truncated due to character limit.
    Any help would be greatly appreciated.

    Originally Posted by utman
    My guess is that it is a problem in the GWIN code. Is SP 1 the latest? Usually when the code dies in libc it isn't really libc but the function that called libc.
    We just downloaded SP 2 (fairly new support pack) and some subsequent Hotfixes for SP 2. We will be loading those tonight.
    Thanks for your response.

  • Failed to run task \Microsoft\Windows\WS\License Validation. Error Code: 0x80041326

    Today I noticed this message in the event viewer:
    Event ID: 16387Severity: ErrorSource: Microsoft-Windows-Security-SPPLog: ApplicationMessage: Failed to run task \Microsoft\Windows\WS\License Validation. Error Code: 0x80041326
    Does this mean the free eval use version of Windows Server 2012 has expired?
    OS: Windows Server 2012 RC Build 8400
    Thanks

    Hello Darrell:
    Thank you for responding to my issue.  Here is the output you requested:
    Windows Script Host
    Software licensing service version: 6.2.8400.0
    Name: Windows(R), ServerDatacenter edition
    Description: Windows(R) Operating System, RETAIL channel
    Activation ID: c3dbac02-e65b-48bc-a61e-e14befbdd674
    Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 03612-01333-001-000805-00-1033-8400.0000-2382012
    Installation ID: 090195464127466880553502868392878303995792363977152161148874086
    Use License URL: https://activation.sls.microsoft.com/SLActivateProduct/SLActivateProduct.asmx?configextension=Retail
    Validation URL: https://validation.sls.microsoft.com/SLWGA/slwga.asmx
    Partial Product Key: 78KXV
    License Status: Licensed
    Evaluation End Date: 1/15/2013 3:59:59 PM
    Remaining Windows rearm count: 1000
    Trusted time: 9/15/2012 3:37:56 PM
    OK   
    Your request for info got me thinking about another oddity I've been working on this week - My firewall (NetGear SRX5308) shows dropped incoming packets from ip 65.55.121.94 with source port 443 and destination port 55338.  ARIN shows the ip belongs
    to MICROSOFT-1BLK, aka Microsoft.  Is it possible that my firewall is blocking communication to MS's licensing servers?

  • Key not valid and error code 1603

    For over a week now, SKYPE software dissapeared from my computer.  I thought I needed to upgrade & have tried more than twenty times.  I paid SKYPE credit to update that twice & it finally gave me an email confirmation.  However, every time I try to download or upgrade any SKYPE software, it goes through the process then gives me an eror message: "Key not valid for use in specified state"  & error code 1603.  I do not know what else to do.  I receive one email from SKYPE community & I followed that info, but again to no avail.  Please help.  I need to talk to my children in Canada.  Thank you
    This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

    carusothethird wrote:
    I can't seem to download the latest version of SKYPE!?!?!?  I have tried for over 5 hours to no avail.  I keep getting an error message "Key not valid for use in specified state  & another one stating code 1603  What can I do?  I must talk to my wife tonight.  I am in Texas & she is in Vancouver, Canada.  Please help me get back on.  Thank you. carusothethird
    Try this:
    http://community.skype.com/t5/Windows-desktop-client/Lastest-version-of-Skype-won-t-install/m-p/3638...
    If this will not help then try to uninstall this Windows Security update KB2918614.
    http://windows.microsoft.com/en-us/windows/remove-update#1TC=windows-7
    After uninstalling this update try again to install Skype.
    Alternative you can install/update Skype using this  Lessmsi  method:
    http://community.skype.com/t5/Windows-desktop-client/Impossible-to-install-v6-13-0-104-Error-1603/m-...
    Be aware that if you want to install the currently latest 6.20.0.104 version, then you should use the SkypeSetup_6.20.0.104.msi file in order to extract the Skype.exe and Login.cab files.
    The SkypeSetup_6.20.0.104.msi file can be downloaded using this link:
    http://download.skype.com/msi/SkypeSetup_6.20.0.104.msi

  • SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

    Hi,
    I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
    setup rolls the SCOM install back.
    Has anyone seen this issue before or know how to help resolve it?
    Appreciate your help, below is the SCOM installation log:
    Thanks
    Marc
    [13:27:27]: Always: :Creating Database: OperationsManagerDW
    [13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    : Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
    [14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :Exception running sql string
    DECLARE @sql NVARCHAR(MAX);
    SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
        ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
        LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
    EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion
    of the operation or the server is not responding.
    [14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
    [14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Always: :InnerException.StackTrace:
    [14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or
    the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
       at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
    [14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
    [14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item.  Setting rollback.
    marc nalder

    Hi,
    Based on the log, I recommend you use the following way to test SQL connectivity.
    You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
    if it fails to connect.
    For more information, please review the link below:
    The easy way to test SQL connectivity
    http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Dvd player error codes -70001 & -32

    when attempting to play a dvd recv'd Error codes -7001 & -32.
    What do they mean?!
    jc

    when attempting to play a dvd recv'd Error codes
    -7001 & -32.
    What do they mean?!
    jc
    In the thread "PLEASE HELP- region codes" in "Discussions > iDVD > iDVD4 and earlier", using Panther I reported " I inserted a different region code disc, got the message that I only have 3 changes left, then the error -70001. "
    After upgrading to Tiger last August I reported " just upgraded to Tiger 10.4.0 and the problem was still there.
    Then I installed the software updates to 10.4.2 and DVDPlayer 4.6: I am now allowed to change the region code."
    Howwever, last month I had the problem again, possibly after installing 10.4.3: "3 changes left" and "error code -70001" on inserting a disc with a different region code.
    The solution I found was to use VLC, a DVD player which ignores the region code, rather than the mac os X DVDPlayer.
    http://www.videolan.org/vlc/features.html
    Regards,
    Colin

  • What is error code 1068?

    I can't download any epub books to my kindle fire. I keep getting an error message:
    Error Importing EPUB.java.Lang.NullPointer Exception (error code 1068)
    I tried deleting and reinstalling the program but am still getting the error message.

    Hi lenshao,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like the iPod is getting a 1439 error. I would recommend that you read this article, it may be able to help the issue.
    iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439 - Apple Support
    Cheers,
    Mario

  • Error code -200081

    I am trying to calibrate a NI 9211 unit but I keep getting the following error code.
    Error or termination occurred. This calibration may not be valid. Error code: -200081 Error message: Error -200081 occurred at DAQmx Start Task.vi at step Verify Analog Input:1 Number of Channels: 2 Sample Rate: 7.140001 Maximum Sample Rate: 6.000000
    I am using CalExec version 3.3.2. Is there a fix to this problem?
    Ryan A. Saunders
    Idaho National Laboratory
    Standards and Calibration Lab
    phone: (208)526-2202
    email: [email protected]

    Hi Saipanman,
    Calibration is only possible will a Chassis such as the 9172 as this is not available for the single module carrier such as the 9162.
    If you are able to, try using a Chassis to perform the calibration instead.
    Nathan
    Applications Engineer
    National Instruments UK & Ireland

  • Catch error codes

    I'm attempting to catch the exception error codes and have them attached to an email that i send out.  in expression editor there is an option to save root cause.  But i'm not sure how to make use this and i could not find any examples ro docs that describe what it's looking for. Any help?

    I think you've misunderstood me.  You create another script, which is triggered only when your main script fails.  It's in this new script that you use the Get Trigger Info step and email yourself the details of the failure.  Perhaps track the major steps in your script with a string variable and write that too.
    Look at one of your applications, and do you see at the bottom of the page there is a default script you can set?  Yeah, that's the one.  =)

  • Error code: sec_error_untrusted_issuer, after i add the exception, get the certificate i get a blank page with big letters NOT FOUND.

    www.google.com uses an invalid security certificate.
    The certificate is not trusted because it is self-signed.
    The certificate is only valid for 78-159-121-201.local
    (Error code: sec_error_untrusted_issuer)
    After i add an exception for the site, i get this:
    Certificate Status:
    This site attempts to identif itself with invalid information.
    Wrong site:
    Certificate belongs to a diffrent site, which could indicate an identity theft.
    Unknown Identity
    Certificate is not trusted, because it hasn't been verified by a recognized authority.
    And then a blank page with big letters "Not Found"
    == URL of affected sites ==
    http://google.com , www.youtube.com , www.omegle.com , www.lockerz.com

    Do NOT add a security exception: someone is tampering with your internet connection!
    When you ask to connect to these sites using https, Firefox gets a certificate from the website which responds. Anyone can make a certificate, but to be valid the certificate must be signed by an organization which Firefox trusts.
    The person responding provided a certificate with its response which which was not signed by anybody, so Firefox doesn't know who sent the response, and neither do you.
    In short: you asked to talk to google and google did NOT send the response.
    As this is happening for several different websites, the attacker is probably on the network between your computer and the internet. Ask the people you get your internet connection for help: they may have had their computers hacked, may discover that the problem exists further along in the network, or they may even be responsible themselves.

  • Error code: sec_error_untrusted_issuer but 'This site provides valid, verified identification.'

    I cannot access GMail because I get the 'This Connection is Untrusted' page.
    The Technical Details are:
    mail.google.com uses an invalid security certificate.
    The certificate is not trusted because the issuer certificate is not trusted.
    (Error code: sec_error_untrusted_issuer)
    If I click 'Add Exception', in Certificate Status, it says, 'This site provides valid, verified identification. There is no need to add an exception.'
    My machine is on a corporate site, behind a firewall and proxy server. The proxy server substitutes the certificate so although it's called mail.google.com, it's issued by our internal CA. I've added the internal CA certificate to the Authorities list (by importing it to Servers and then selecting 'Trust the authenticity of this certificate').

    Make sure you have SSL and TLS on, they are in the advanced options menu.
    ARTICLES TO READ.
    * [[Enable SSL to fix the Firefox cannot connect securely error message]]
    AND
    * [["This Connection is Untrusted" error message appears - What to do]]

  • Validating XML files and generating error codes

    I want to validate an XML file with a schema & also get hold of the fields/attributes/tags
    that caused an error and generate error codes based on that. Any suggestion on
    how this can be done. DOM, SAX allow to do validation but how do I know exactly
    know which tags caused errors. We have to track the errors codes.

    "SP" <[email protected]> wrote:
    Use the HandlerBase class for getting hold of the tags and its attributes.
    The methods in this class take the tags and attributes and throw the
    SAXException. You can use these methods to find out which tag is throwing
    an
    exception.
    Hope this helps
    SP
    I am using the DOMParser.parse method with the xerces parser. I have an error
    handler registered to get hold of the errros. What happens is the parsing stops
    at the first instance of an error. I want to continue parsing to get hold of all
    errors. How can I achieve that?
    >
    "leena" <[email protected]> wrote in message
    news:[email protected]..
    I want to validate an XML file with a schema & also get hold of thefields/attributes/tags
    that caused an error and generate error codes based on that. Anysuggestion on
    how this can be done. DOM, SAX allow to do validation but how do Iknow
    exactly
    know which tags caused errors. We have to track the errors codes.

  • Error Code :-5002 Error Message :Enter valid currency  , '51100000-01-001-0

    Hi all,
             I have found a error "Error Code :-5002 Error Message :Enter valid currency  , '51100000-01-001-01'" while adding the DELIVERY document.
    I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
    Could anyone solve this problem. is there any setting which i am missing..??
    Regards
    Sandesh

    HI Sandesh,
    Check Sap note :1252328
    and also check below thread of similar issue:
    Re: 'Invalid Currency' error when attempting to deliver order
    Hope this will solve your issue.
    Thanks,
    Neetu

  • Oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

    Dear Guru's,
    I am not able to solve the above issue for last couple of days.
    I am newbie to the webservice
    My Issue...
    I am using Jdeveloper 11.1.2.4.0 Release 2
    1. Using Jdev I built one small Web Service with two methods.
            While testing the Webservice...
                   I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
    2. I created another application to consume the web service i created.
                   1. I added the webservice SOAP and added the method.
                   2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
    3. While executing the created jsf page I received the error message as below
    "oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
    Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
    Can anybody help to solve this issue.
    Thanks and Regards,
    Durai S E

Maybe you are looking for

  • Java Applet Window Warning - Appearing through

    Hello The warning that is displayed on applet windows now when using java is causing a problem. When you bring a fresh web page or word document over the top of the applet window, the java applet warning is still visible as if it has been brought to

  • I want to help to Install DataBase of Oracle 9i

    Hi ; I have download oracle 9i from this page http://www.oracle.com/technology/software/products/oracle9i/htdocs/winsoft.html and I download all the files in this page , But i do not know from any file the installing is start and what the meaning of

  • View or Query

    I am very inexperienced with LS (second attempt after looking a few years ago). I have watched many video tutorials which has got me very motivated to give it a nother go but I am failing at the first hurdle. I have an existing DB in SQl2008 for CLIE

  • MacBook Pro and iPAQ

    I just purchased my MacBook Pro and I'm leaving behind a PC legacy...lol! I have an iPAQ for work that I used to synchronize with my Dell. Can I still do this w/ my new Mac?

  • Transfer edited photos from iPhoto app on my iPad back to the iMac

    Dear all, I've edited some photos on my ipad using the iPhoto app and I would like to have them transferred back to my iMac.  Can anyone please show me the required steps?  Thanks. Note: I've tried plugging in my ipad to my iMac and opened iPhoto on