Validation for Network

Dear All,
I am trying to validate, One WBS Element has only one network assignment if more than network assign to WBS Element than system gives error.
But I didn't find a solution for the same in OPSI.
Thanks,

Hi,
If you want system not to create further sub network then better go with user status (OK02). Select object types of Networks and use business transaction as create subnetwork and set this is as forbidden.
Have a look at few more business transactions at OK02. May be you will get the solution.
Regards,
Amit

Similar Messages

  • Validation problem for Network Header

    Hi Colleagues,
    I try to use the following validation in Network Header at the prerequisite section:
    CAUFVD-PROFID = 'YP00020' AND CAUFVD-PRONR :1-3: = 'WBC'
    However, I get a system error message as followed:
    Formula cannot be saved because it is incomplete
    I will be glad for any idea how to solve this issue.
    Thanks in advance and Best Regards
    Nir

    Hi,
    I tried the following in my system and it did gave me the green light.
    CAUFVD-PROFID = '0000002' AND CAUFVD-PRONR ":1-3:" = '12.00002'
    Maybe this will help you.
    Regards
    Sreekanth

  • Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

    Good morning,
    I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
    Installation goes plain until around the end of the progress bar, it stops on the setup of
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    I've put in my SkyDrive the error log I received after the install;
    I'm at full disposal if you need further information,
    thank you in advance
    Best regards
    Francesco

    Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above: 
    SqlEngineDBStartConfigAction_install_configrc_Cpu32
    giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
    After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
    Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
    Then, I just got my account added as Local Admin and then tried to start the service and was able to.
    However, I am not sure whether same was the case for you.
    Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

  • "Key not valid for use in specified state" after IIS Reset?

    I have had a ton of issues with the System.Security.Cryptography.CryptographicException: Key not valid for use in
    specified state. error. This seems to only occur now when IIS is reset and I try to resume my browsing session. So I am logged into the application, I reset IIS on the server, refresh the page and see the error.
    I am building an application in .NET 4.0 MVC with a Secure Token Service that is using WIF 4.0. Everything works as expected, except this case. I even tried to use a custom error page, but the error is happening there as well. Because of that, I can't get the
    custom page to show either. One thing I noticed is that if I switch my IIS APP Pool user back to Network Service account it doesn't throw the error any more. We have some restrictions (mostly network related) in the application that we need to use an account
    in our AD for the app pool sections
    Anybody have any experience with this issue?

    Hi Shennessy,
    In my opinion, this thread is related to ASP.NET forum. So please post thread on that forum for more effective response. Thank you for understanding. Please refer to the following link.
    http://forums.asp.net/.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot export private key: "key not valid for use in specified state"

    Hi,
    This is a bit of a long story but I hope someone can give us some guidance.
    We use authentication certificates issued from our own Enterprise CA to control user and machine authentication via RADIUS/NPS for our wireless network.  Certificates are deployed via group policy/autoenrollment. In general this works well but
    we have an intermittent problem where user authentication stops working for a user who was fine before. The user certificate looks OK via Certmgr (shows as valid, shows that there is a private key associated with the certificate).  The NPS server
    logs show that the machine has been authenticated and granted access, but the user in this situation doesn't show up in the server logs at all. 
    The only solution in this case is to connect to the wired network and request a new certificate for the user (either via certmgr or just by deleting the duff cert and logging off/on again to get the cert via autoenrollment).
    The interesting thing is that while a "working" certificate can be exported with no problem, a duff certificate cannot be exported with its private key, giving the error "key not valid for use in specified state". (Obviously the certificates
    come from the same template, and the key is not marked unexportable).  The key files are present in %userprofile%\Appdata\Roaming\Microsoft\Crypto\RSA and the user permissions on these files look correct.
    After much searching of the forums I tried running certutil-repairstore on the duff certificate and that also returned the same error.  I also tried an undocumented switch Certutil -user -key -v and again, got a very similar error "Loadkeys returned
    key not valid for use in specified state. 0x8009000b (-2146893813)".
    I'm assuming that the fact that the key is unexportable/corrupt is also the reason why the certificate can no longer be used for authentication.
    Does anyone have any clues as to what might be causing this, and/or if a certificate with a key in this state can be repaired?
    Thanks!

    I can just share an experience I once had that was somewhat similar:
    In this case certificates could sometimes not be enrolled and the CSP came up with a related error message.
    The root was the software / driver (?) for a hardware dongle required to run some software. This "driver" added a registry key to the list of CSPs (under these HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider - but I have seen this with
    XP, so the exact location might be different now).
    This fake CSP entry that had quite a weird name effectively broke other CSPs. After removing the access to / generation of keys worked fine.
    So it would be interesting to know if you run some software that is "close to CSPs or cryptography".
    Elke

  • I have a Belgian Apple ID, but want to use the UK i-tunes store.  I get a dialogue box saying "The Apple ID is only valid for purchases in The Belgian iTunes store".  Is there any way around this?  Thanks, Jackie

    I have a Belgian Apple ID, but want to use the UK i-tunes store.  I get a dialogue box saying "This Apple ID is only valid for purchases in the Belgian itune store".  Is there any way around this?  Thanks, Jackie and Manuel

    When you move to Portugal (very nice, I've just come back from visiting Cascais/Sintra/Sines ) I think you'll just get re-directed to Portuguese iTunes. When I moved to France from the UK  I got re-directed to the French store.
    To view UK programmes in France I used to subscribe to a VPN server through https://www.my-private-network.co.uk/ (there are others, but very pleased with their service). The catch-up channels (iPlayer, etc) think you're in the UK so you can watch the programmes online. Wouldn't work with iTunes UK store though .

  • No driver detected for network controller for - Pavilion dv6-6188ca

    I had to reinstall windows 7 pro OS as my notebook I it was not able to boot up.  I did not use recovery CDs.  I used windows 7 pro install CD and with a valid product key, Now everything works except for wireless LAN.
    Under device manager I have yellow mark for network controller and says driver not found. I tried all drivers listed for this model from HP support site but without any luck. (there are 8 network driver listed for this model on HP support site)  Moreover there is no specific driver listed as "Network controller" on HP site.  My notebook uses Broadcom 4313 802.11b/g/n Wi-Fi and 2070 Blutooth 2.1 adaptor (combined). Bluethooth is working fine as it is able to see other blutooth devices in the vicinity.
    How I can I fix this? Where can I  find the  driver for the network controller for this device? Any help would be highly appreciated. I havn't tried to connect through LAN and let windows look for appropriate driver for this notebook.
    This question was solved.
    View Solution.

    Hi:
    This Broadcom wireless driver should work for you...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en

  • Validation of Network Profile against Project Profile

    Hi,
    I would like to monitor the creation of Networks with regard to the Project Profile, based on the Network Profile, so that when a Network is created with Profile "ZCN00", for example,it could be saved only if  the Project Profile is "ZPS000" (taken from the Project Definition to which the Network is assigned).
    I have used Validation/Substitution for similar logic regarding WBS elements against Project definition, but I cannot use Validation/Substitution for Network Header for this purpose because the Project Profile is not accessible in the Data for this Validation.
    I have also tried Validation/Substitution in "Consistency check project structure" where all data is accessible - but validations here cannot be assigned in customizing to various profiles (Project/Network); as stated in thread "Validation for Proj. structure" in this forum, these can be activated using transactions CNC4, CNC5.
    This does not solve my problem because I need to PREVENT the creation of a Network in the "wrong" Project - and not to trace  the inconsistency AFTER the network has been created.
    Is there a way to use the Consistency check project structure for my need without any other means, or do I have to use one of the exits provided in that tool?
    Thanks in advance,
    Eytan.

    Dear Sam,
    Thank you for your reply.
    In our work processes, there is a main function who creates and manages the Project Structure, excluding Networks, and in many cases, certain people may work on several different projects where they create networks, so I cannot limit their authorization to specific profiles, be it Project definitions or networks.
    I know my issue can easily be solved by a simple development (like the Badi suggested in Virendra's message)- but I want to make sure I have covered the possibilities in the standard system - specifically VSR - before I go there.
    Regards,
    Eytan.

  • Depuis la mise à jours de IOS7 sur mon Ipad, je n'arrive plus à faire de mises à jour de certain de mes applications et toujours sa affiche en anglais ce message [ Account not in this store. Your Account is not valid for us in the U.S store.... Aider moi

    Salut,
    Depuis la mise à jour de IOS7, je n'arrive plus à faire de mise à jours de certains de mes aplications!! Exemple: Facebook, Twiter et de mes jeux...
    c'est le même message qui s'affiche en anglais [ Account not in this store. Your Account is not valid for us in the U.S store. You must switch to the french store before purchasing.] bref j'ai bien compris le message ( traduction)
    Je veux juste que celà redevienne comme avant, qu'il fonctionne correctement.
    Ah oui je ne suis pas calé en informatique et pire version Apple! Je ne connais que les bases!
    merci de trouver une solution à mon problème.
    From Tahiti - French Polynésia.      

    Hi Subarutuning,
    If you are receiving an error when attempting to update your iPhone, use the steps in this article to troubleshoot -
    Resolve iOS update and restore errors - Apple Support
    Error (1) is associated with a hardware issue, but use these steps -
    These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
    Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
    Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
    Confirm that your security software and settings are allowing communication between your device and update servers.
    If you still see the error message when you update or restore, contact Apple support.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Iphone 5s - Calls Breaking Up - Searching for Network

    Hello.
    I recently started using my new Iphone 5s and I have a big problem.
    Every call I get or make, the call suddenly breaks up during the first minute. My network reception bar drops to 1 bar, then says "searching..." briefly, and then it comes back. But the call is already gone. There are no problems when I remake the call. But I get this problem with every single call that I make. I've never had a problem with my Iphone 4 for 2 years, so I don't think it's about my carrier. Anyone else experiencing the same problem? Any suggestions?

    I have the same problem. My phone keeps "Searching..." for network, and if I don't fix it, it can go on like that for days. I tried several solutions, Reset Network Settings, Reset All Settings, hard reset, and finally I restored my iphone to factory settings then re installed ios 8.1.3, which I had trouble doing because my phone took 4 days to finally have a successful restore. I am not sure if this is about updating to ios 8.1.3, but all of this happened to my iphone 5s a few days after updating. Anyway, after my phone had miraculously went thru with the restore, my phone was back to the way it was, but after 2 days, it went back to searching for network again whenever I get to an area with poor signal. I put phone in Airplane mode for about 10-20 mins, then turn off Airplane mode to check if signal is back. If it still  doesnt, I reset network settings, then airplane mode again. I have not yet used reset all settings since my iPhone restore. I tried to google and see if this really is an ios problem or just my case, then I came across your question. The latest fix I did just this morning is I plugged my phone to my wall charger and tried to dial a number and pressing the green call button several times until the signal went back. That was by far the simplest solution I have discovered, but I still can't say if that IS the solution because it was just my first time to do it. I advise you not to restore your phone because in my case, mine took 4 days to until i was able to use my phone again since restoring wasn't working. You don't want to end up with a dead brick phone. With mine,  I just kept trying until it went thru and I don't think I will be doing the restore all over again because of what happened.  I hope this is just a problem with ios update and that apple will soon find a permanent fix to this.

  • Server 2012 R2 - The system failed to register host (A or AAAA) resource records (RRs) for network adapter

    We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
    When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
    The system failed to register host (A or AAAA) resource records (RRs) for network adapter
    with settings:
               Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
               Host Name : SRV-DATA
               Primary Domain Suffix : internal.local
               DNS server list :
    192.168.0.50, 192.168.0.42
               Sent update to server : <?>
               IP Address(es) :
                 192.168.0.99
    The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
    for this name does not support the DNS dynamic update protocol.
    To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
    On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
    the update fails within a few seconds. 
    Source: DNS Clients Events
    Event ID: 8018
    User: NETWORK SERVICE
    This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
    to me so reaching out now to see if anyone has any ideas?
    Environment:
    - Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
    - Windows Server 2012 R2 Client machines (Physical and Virtual)
    - Windows Server 2008 R2 Client machines (Physical and Virtual)

    The zone is configured as "Secure Only"
    The PDC is the SOA for the zone
    I dont have a packet capture from the DC, only the client. 
    The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
    NotifyServers                     : 
    SecondaryServers                  : {10.2.0.3, 10.2.0.5}
    AllowedDcForNsRecordsAutoCreation : 
    DistinguishedName                 : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
    IsAutoCreated                     : False
    IsDsIntegrated                    : True
    IsPaused                          : False
    IsReadOnly                        : False
    IsReverseLookupZone               : False
    IsShutdown                        : False
    ZoneName                          : internal.local
    ZoneType                          : Primary
    DirectoryPartitionName            : ForestDnsZones.internal.local
    DynamicUpdate                     : Secure
    IsPluginEnabled                   : False
    IsSigned                          : False
    IsWinsEnabled                     : False
    Notify                            : NoNotify
    ReplicationScope                  : Forest
    SecureSecondaries                 : TransferToSecureServers
    ZoneFile                          : 
    PSComputerName                    : 
    CimClass                          : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
    CimInstanceProperties             : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
    CimSystemProperties               : Microsoft.Management.Infrastructure.CimSystemProperties

  • Driver not valid for HP Pavilion dv6t

    Need to update my Intel HD Graphic driver.
    Tried HP and Intel and both are stating that the driver being installed is not validated for this computer. Please obtain the appropriate driver from the computer manufacture. Set up will exit.
    Can anyone help? TY

    @ls1313 ,
    Hello and thank you for posting on the HP support forums.  Here is the link to the only supported drivers for your notebook.
    HP Pavilion dv6t-3000 CTO Entertainment Notebook PC
    I hope this helps.
    Have a great day and thank you for posting.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Validation for text field: Null and contains no spaces

    Currently on APEX 3.2
    I want to check 1 text field and 2 text areas to ensure they are not null and blank (hitting the space bar in the field) before submitting the page. How do I do both validations for on each field?

    I created a validation with a type of 'Function Returning Boolean' and using the following code in the expression:
    IF( TRIM( :P1_Text_Field) IS NULL
    Or LTRIM( :P1_Text_Field ) != :P1_Text_Field )
    THEN
    RETURN false;
    ELSE
    RETURN true;
    END IF;
    Edited by: Jeremy_F on Apr 12, 2012 8:15 AM

  • When trying to update my Apps I am being advised my account is not valid for the UK, I must switch to the Ireland store. How do I do this?

    When trying to update or purchase Apps I am being advised my account is not valid for the UK Store and I must switch to the IReland store. How do I do this?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

    Did you try to change the location  in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

Maybe you are looking for