Validation not working for FK01

Hi Guys,
I have written a validation using GGB0 where in i want to restrict a user for using the transaction code in FK01.
I have given the prerequisite as below
SYST-UNAME = 'SRIKANTHD' AND SYST-TCODE = 'FK01'
and Check = False
Then give an error message.
But somehow this validation is not working and i have also activated this in OB28.
Any ideas will be helpful.
Thanks,
Srikanth.

Dear Srikanth,
You can choose the button Local Object instead of Save and this information will be ignored.
Then you will receive one screen to insert the enhancement, insert please SAPMF02K.
Then click on button Components and then one little screen will ask you to save. Click yes and you will see another screen with Function exit EXIT_SAPMF02K_001 fulfilled already.
Double click on EXIT_SAPMF02K_001 and the system will create the program and after that you should include your own code there.
I hope it resolves your inquiry.
Best Regards,
Vanessa.

Similar Messages

Spry select menu validation not working for all menus

This is VERY strange...I have two menus which show depending on the selection in another menu. The other, or main, menu has the spry validation working fine. So does the validation for one of the other 'child' menus. But the other child menu validation does not work, despite the fact that the code is nearly identical for both except for the spry ids and select ids (of course). You can see the form working at:
https://registrations.ucc.usyd.edu.au/profile.php
If you select, say, Arts faculty from the faculty menu, then you will get another menu for schools. Validation works for these when the submit button is pressed. However, if you select 'Not Faculty' from the faculty menu another menu will show instead of the school menu. This is the menu that is not validating.
I have attached my php page for the code in this form.
The same problem exists for other menus that are in hidden divs further down the page.
Any help appreciated!!!!

Your key is the "suitcase fusion for a font manager" line.
There is a bug where you won't be able to create a button if you have a bad font, or a duplicate font, installed.
First try shutting off all of the fonts you have open with Suitcase, and see if that helps. If so, open one suitcase at a time until you figure out which font is the culprit.
If shutting off all but the basic System fonts does not help, you might have to reinstall your system, or somehow update your core System fonts. I don't know how to do that, but there was a recent article at http://www.tidbits.com/ that discussed fonts and their maintenance. But ultimately it's a font problem.

Validation not working for Business place/section mandatory

Hiii experts, i am trying to a write a validation for making business place/section mandatory in some of t-codes like f-47, f-37 fb60 and so on... i wrote the following logic in validation
Prequisite
BKPF-BUKRS = '1991' AND SYST-TCODE = 'F-47'
Check
BSEG-BUPLA = '1991' AND BSEG-SECCO = '1991'
Message
Business Place and Business Section does not exist ..
Moreover i activated the same in ob28 with 2( active, no batch input). After this when i ran f-47 for DP request... it doesnt suppose any error message when i dont write Business place/section... Kindly Guide me..
Regards
Abhay

Hi
Please put the validation rule as under:
Prequisite
BKPF-BUKRS = '1991' AND SYST-TCODE = 'FBA6'
Check
BSEG-BUPLA <> '1991' AND BSEG-SECCO <> '1991'
Message
Business Place and Business Section does not exist
Also post a transaction in system and check the actual t code. For eg, when you post the transaction with F-47, the actual system transaction code is FBA6 and for F-48 it is FBA7.
Thanks & Regards
Sanil Bhandari

Validation not working during Mass Change of Vendor Line Items

Hi All,
I created validation for Reference Key 1 field of Vendor line items, in this validation i used customized user exit.
Whenever i select multiple line items in FBL1N for mass change & try to put a unauthenticated value system gives error as per Validation only for 1 st item but it not work for subsequent items & put the unauthenticated value in subsequent line items.
I am not able to understand why Validation is working only for 1st line item during mass change & not for subsequent line items.
Please provide your suggestions in resolving this issue.
Thanks
sandeep

Hello Sandeep,
I understand your issue. First check if the changes as per the SAP Note 640908 (https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=640908) is available in your system.
Actually, Mass changes call FB02 in background and at this stage Validation gets activated and hence, the control doesn't go back for the next item changes. You can test this by deactivating the Validation and then the mass changes will me fine.
I hope this explains the behaviour.
Thanks and regards,
Suresh Jayanthi.

Fingerprint utility is not working for normal users - Tecra M11

Hi All,
I installed windows 7 pro in Tecra M11 laptop and the Toshiba finger print utility is not working for normal users.
It is working only for domain administrators. The TFPU is not working for, normal domain users, local users, local administrators. If we run the utility it will ask to enter the windows password and once we applied the password then the message saying "entered password is not valid" will prompt even if we are trying to use the utility first time.
If we try with a domain admin account it will work without any problem. Can somebody help me to trouble shoot this issue?
Thanks.

People nowadays experienced that no matter How many times we glide our finger it have no response.In this instance, you might be very afraid of Windows password lost by reason that there is a plenty of important data on your PC.
Then what should you do? One choose is fix the Fingerprint scanners, but this method will cost a lot of money. The other is use the Windows password function to solve the problem. Certainly, this is a very safer, faster and easier to use method for you.
According my personal experience, you can try these three ways to re-access to your PC:
Method 1: Login with the default administrator account
* Step 1: Start Windows PC
* Step 2: When you can see the Windows login screen, press ctrl+alt+del keys Twice and it'll show Classic Login box
* Step 3: Type Administrator as Username and leave the password field blank
* Step 4: Press the Enter Key and then you can be able to login the default windows administrator account which is it created by default when install windows.
*Note:* This trick is only work for Windows XP. And when you input the key combination Please don't put the cursor on any account. And if you change the name or password before, you cannot login by this way.
Method 2: Use the previous password reset disk
This method describes how to create and use a password reset disk for a computer that is a member of a domain. You can use a Windows password reset disk to gain access to your Microsoft Windows Professional-based computer if you forget your Windows password. Please click here to learn more.
Method 3: Using Windows Password Unlocker
Using Windows password remove software is could be the fastest and easiest way for you to reset your Windows password while you didn't create a password reset disk before.
There are 2 options for you: recover Windows password with a bootable CD/DVD or recover Windows password with a USB flash drive.
Before starting, a bootable CD/DVD or USB flash drive and a computer with CD drive are required. (Internal CD drive and external CD drive are both OK.
Option 1: Recover Windows password by burning a bootable CD/DVD
Option 2: Recover Windows password by burning a USB flash drive
The whole Windows password recovery process can be divided to 3 big steps:
* >> Step 1: Burn a USB flash drive to remove lost Windows password
* >> Step 2: Set your target computer to boot from USB
* >> Step 3: Recover forgotten Windows password with the burned USB flash drive
In fact, all you need is a *Windows Password Unlocker www.passwordunlocker.com/windows-password-recovery.html which can help you directly reset your windows xp password, and then you can login your XP without a password required. Of course, there are also some other ways to do it, but this way may be most convenient one.

ValueChangeListener is not working.for disable property

valueChangeListener is not working for disable property with following details. Requirement is to enable to date if from to date is entered.
Field 1:
<af:inputDate value="#{bindings.PrintFromDate.inputValue}"
label="#{bindings.PrintFromDate.hints.label}"
required="#{bindings.PrintFromDate.hints.mandatory}"
shortDesc="#{bindings.PrintFromDate.hints.tooltip}"
id="id2" autoSubmit="true"
*valueChangeListener="#{reprintBean.enableToDate}">*
<f:validator binding="#{bindings.PrintFromDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintFromDate.format}"/>
</af:inputDate>
<af:inputDate value="#{bindings.PrintToDate.inputValue}"
label="#{bindings.PrintToDate.hints.label}"
required="#{bindings.PrintToDate.hints.mandatory}"
shortDesc="#{bindings.PrintToDate.hints.tooltip}"
id="id1"
*disabled="#{!requestScope.enableToDate}"*
*partialTriggers="id2"*>
<f:validator binding="#{bindings.PrintToDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintToDate.format}"/>
</af:inputDate>
public void enableToDate(ValueChangeEvent valueChangeEvent) {
System.out.println("IN enableToDate");
if (valueChangeEvent.getNewValue() != null) {
FacesContext context = FacesContext.getCurrentInstance();
System.out.println("Enable to Date");
context.getExternalContext().getRequestMap().put("enableToDate",true);
Please suggest me what is wrong on this.
Edited by: SrinivasA on Jan 28, 2011 5:34 PM

I still not able to achive this. (null the to date value if the FromDate has changed)
<af:inputDate value="#{bindings.PrintFromDate.inputValue}"
label="#{bindings.PrintFromDate.hints.label}"
required="#{bindings.PrintFromDate.hints.mandatory}"
shortDesc="#{bindings.PrintFromDate.hints.tooltip}"
id="id2" autoSubmit="true"
*binding="#{reprintBean.fromDate}"*
*valueChangeListener="#{reprintBean.enableToDate}"*>
<f:validator binding="#{bindings.PrintFromDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintFromDate.format}"/>
</af:inputDate>
<af:inputDate value="#{bindings.PrintToDate.inputValue}"
label="#{bindings.PrintToDate.hints.label}"
required="#{bindings.PrintToDate.hints.mandatory}"
shortDesc="#{bindings.PrintToDate.hints.tooltip}"
id="id1"
disabled="#{bindings.PrintFromDate.inputValue eq null}"
binding="#{reprintBean.toDate}"
*partialTriggers="id2">*
<f:validator binding="#{bindings.PrintToDate.validator}"/>
<af:convertDateTime pattern="#{bindings.PrintToDate.format}"/>
</af:inputDate>
Value change method:
public void enableToDate(ValueChangeEvent valueChangeEvent) {
*setToDate(null);*
This method is not able to reset the to date value to null. Please help to find the issue here.
Edited by: SrinivasA on Feb 1, 2011 5:12 PM

Out of office replies in Exchange 2013 not working for external recipients

Hi,
Few days ago a couple of company workers went to vacation. They set up OOF automatic replies in OWA 2013. However automatic replies are not working for external recipients (outside of company). Internal users (company users) receive OOF notification.
I'm using smart host in sender connector configuration (SMTP server of internet provider) to deliver emails. Any clues about this problem ? Please find below part of the transaction log. For testing purposes i set up administrator account
to be on vacation.
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
DROP     ROUTING
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
HARED... SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
RECEIVE SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test
AGENT... AGENT    [email protected]
{[email protected]}             Automatic reply: vacation test
TRANSFER ROUTING [email protected]
{[email protected]}             Automatic reply: vacation test
FAIL     SMTP
[email protected]
{[email protected]}             Automatic reply: vacation test

Hi Informus,
Please check if it is allowed in AllowedOOFType of the Remote Domain *
In Exchange 2013, the only way to see or change the current configuration for automatic replying and forwarding to the Internet is via the Exchange Management Shell (EMS) with PowerShell commands.
To get the currently configured Remote Domains, use:
Get-RemoteDomain
Name                           DomainName
AllowedOOFType
Default                        *
External
Get-RemoteDomain Default | fl AllowedOOFType, AutoReplyEnabled, AutoForwardEnabled
AllowedOOFType     : External
AutoReplyEnabled   : False
AutoForwardEnabled : False
To change the settings, use the Set-RemoteDomain command.
Enable automatic replies
Set-RemoteDomain -AutoReplyEnabled $true
Enable automatic forwards
Set-RemoteDomain –AutoForwardEnabled $true
Enable OOF for Outlook 2003 and previous (for Exchange 2007 and 2010 support)
Set-RemoteDomain –AllowedOOFType $ExternalLegacy
To change all these properties at once, you can use:
Set-RemoteDomain Default -AutoReplyEnabled $true –AutoForwardEnabled $true –AllowedOOFType $ExternalLegacy
Note:
Valid settings for the AllowedOOFType property are:
External
This is the default and only allows for the new style OOF messages as introduced in Outlook 2007.
ExternalLegacy
This settings allows for both the new style and old style OOF messages and needs to be set if you want to enable external OOF support for Outlook 2003 as well.
None
This setting doesn’t allow for the use of OOF messages at all (both internal and external).
InternalLegacy
This setting only allows for internal OOF messages to be sent for all Outlook versions.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.

Client Side Javascript Validation not Working in Struts 1.x version

hi,
I'm following the steps provioded in the below link for Javascript Client side validation but still it is not working.I'm struggling to get this work.
[http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/|http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/]
"The framework automatically generates the browser specific JavaScript and validate the data only at the client side."From the above statement i undertstand that framework itself generates the javascript function for validating the field mentioned in validations.xml file so that we dont have to explicitly write a javascript function for
validating the fields
(or)
Do we need to call an explicit function
Please need help on this.
I have followed all the steps mentioned on the above link but Client Side Javascript Validation not Working in Struts 1.x version....
Thanks and Regards,
Deepak

Hi,
Please find my steps below....still getting an error.
2> which version of commons-validation.jar needs to be downloaded ...Link please
    downloaded the latest commons-validation.jar and placed in lib.refreshed the project,and did a build.
    3> which DTD name to be specified in "validator-rules.xml" which is in accordance to commons-validator.jar file.
validator-rules.xml ::
<!DOCTYPE form-validation PUBLIC
          "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
          "http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">validation.xml:
<!DOCTYPE form-validation PUBLIC
"-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
"http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">
i did as u said and im gettiong the below errorNov 5, 2009 4:33:08 PM org.apache.struts.validator.ValidatorPlugIn initResources
SEVERE: Invalid byte 2 of 2-byte UTF-8 sequence.
org.apache.commons.digester.xmlrules.XmlLoadException: Invalid byte 2 of 2-byte UTF-8 sequence.
     at org.apache.commons.digester.xmlrules.FromXmlRuleSet.addRuleInstances(FromXmlRuleSet.java:139)
     at org.apache.commons.digester.Digester.addRuleSet(Digester.java:1610)
     at org.apache.commons.digester.xmlrules.DigesterLoader.createDigester(DigesterLoader.java:89)
     at org.apache.commons.validator.ValidatorResourcesInitializer.initialize(ValidatorResourcesInitializer.java:122)
     at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:238)
     at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:181)
     at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:1036)
     at org.apache.struts.action.ActionServlet.init(ActionServlet.java:455)
     at javax.servlet.GenericServlet.init(GenericServlet.java:212)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3996)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4266)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:760)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:740)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544)
     at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:927)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:890)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:120)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
Need help forum members.....
Please reply to my question 1 which has been asked before as belowDo i need to write explicit javascript function for validation in Struts (or) struts generates the javascript function by itself.??? Please explain with an example....
Edited by: Deepak_A_L on Nov 5, 2009 4:37 PM

RequestFocus() not working for JTextArea

requestFocus() is not working for JTextArea.
A validation message is displayed and when clicked on 'ok', requestFocus() does not work. Cursor is not shown in the text
area.
Any suggestions/solutions pls?

here is the sample code:
public boolean checkData()
String comment = commentArea.getText().trim();
if( comment.length() < MN_COMMENT || comment.length() > MX_COMMENT )
showError(COMMENT_ALERT);
commentArea.requestFocus();
return false;
return true;
Focus is lost. TextArea is in scroll pane. Scroll pane is contanined in a container pane and pane is for JDialog.
RequestFocus() is working for JRE 1.5.0_07. But its not working for JRE 1.5.0_0 and lower versions.

I have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa

Warranty and support is only valid in the country of origin. The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
Warranty is determined by device (serial number), no documentation required.
Apple does not repair devices, they replace them. For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service.

My apple id will not work for my icloud account

my apple id will not work for my icloud account I am running windows 7 I have reinstalled ICloud for PC several times but do not know where to set up an icloud account

If you are getting a message that says you have a valid Apple ID but not an iCloud ID, it's because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

IPhone 6 External Mic not working for Siri/Dictation

I am finding that the external mic on my iPhone 6 works for phone calls and voice memos, but does not work for Siri/Dictation. When I plug in the earbuds, they work for everything (including Siri/Dictation).
Was chatting to Apple support who had me reset all settings. I thought that worked, but realized that after a reset, Siri is off and I was talking to "Voice control" (which works). When I turned Siri back on, it does not work.
I have two questions for the community to see if you can help:
1- I have been assuming this must be a software problem since the mic does work for non-Siri access. But is that true? Is there a hardware component that Siri depends on which could be faulty here?
2- If it is software, what action should I try to address it? I have done a reset all settings already and that did not help.
Doug

Hi, everyone. I talked to Apple Genius at Apple Store last week, she said it should be a software issue and I needed to reset my iphone 6 plus as a new device and I can not use the backup restore from my iCloud, it was because the microphone bug or glitch can be in the backup also. Ok, followed her advice, erased all contents and set my iphone as a new device , the microphone worked for an hour, but went bad again. I used "voice memo" app from Apple to test the microphone. It is the best tool since it doesn't involve any provider's network and it doesn't need another person's phone to listen and test. If you can hear your voice recording clearly, then the mic works. I tested it 3-4 times a day for a few days now, half of the time the mic doesn't work. So, set as a new device isn't working. The issue is intermittent and it comes and goes as it likes, so very annoying. I carry my Apple EarPods with me in these past few days ust in case I need to make important phone calls. Will need to go back to Apple Genius this weekend for sure. Will give update after the weekend.

CALLER ID not working for International incoming calls

Hi,
I've a strange issue where CALLER ID not working for International incoming calls, it shows INTERNATIONAL UNKNOWN NUMBER in the phone display, but the number shows correclty in Verizon Call assistant !!!
Any clue?

yashshankar wrote:
Hi
I recently purschased an Online number but the caller id does not work for incoming calls.How do we resolve this problem?.
Regards
Yash
You didn't mention what country your Online Number is in. Not all of Skype's Online Numbers are eligible for use as Caller ID when calling telephones or sending SMS messages. If your number is from one of these countries (Chile, Denmark, Estonia, Hong Kong, Poland, Sweden, the UK and the US), then it can be used this way. Otherwise, you can use a mobile number from countries other than Japan or Mexico as Caller ID with Skype, after the number goes through a verification process where Skype sends SMS messages with codes to that number.
To get to these settings, log into your Skype account here on the Skype web site using the "Account" link at the top of this page. You'll see a screen that would include your current Caller ID settings, and a link to change that. If your Online Number is from one of those countries I referenced above, just select it and you're done.
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Validation not working for FK01

Similar Messages

Maybe you are looking for