Validations: Page is still submited?

I have 2 page-level validations on a page. I have specified the error message for both to display "Inline with field and in notifiation"
If the first one fails, shouldnt everything stop and display the error message?
I find that even if both validations fails, the page is still submitted and displays (incorrect) results (in a subsequent query region) along with the validation error messages!
What am I missing? I thought that if any validation fails, the page is not submitted.
Thanks

So how do I prevent a page from being submitted if some data validations are not passed?Validations happen after the page is submitted (unless you do them on the page with javascript, of course).
for a subsequent query region to work properlySubsequent to what? Regions are never subsequent to validations. Regions are rendered first during show processing, the page is submitted, then validations fire. If validations fail, regions are redrawn using the same database session in order to display the validation error messages in context.
If you want to suppress a query region based on session state or anything else, use conditions. There is even a condition (and its converse) that recognizes that inline validation errors are being displayed.
Scott

Similar Messages

  • Error ERR-3331 This page was already submitted and can not be re-submitted.

    Our application has been in production for several years... we upgraded last fall to 3.0 (10g). Periodically in the past users would get this error message "Error ERR-3331 This page was already submitted and can not be re-submitted." but in the past week it has been occuring after every 5-8 page loads. Our application has a couple dozen tabs and if I click from one tab to another (same level), after the 5-8 clicks, I get this error. I am not doing anything on any of the pages, and there are no auto-submits.
    Since this has just started happening consistently (previous errors were related to users using the back key, this time it is not), I wonder if there is any known reason as to what might cause this to occur (application server setting change? etc?) Or is there a particular type of item on the page (LOVs?) that would make this more likely to occur on some pages than others.

    Hmmm... it probably isn't possible to grant outside access to the system, but...
    Does anyone know if it is "possible" that this could occur if one page is still loading when the user clicks on a new tab and attempts to load a new page before the first is loaded? And, is there a setting/page option that I can set to immediately cancel the load of a page when a user tries to load a new page before it's finished?
    I wonder because I can only make the error happen this morning when I click very quickly between tabs (yesterday when more users were online, I didn't have to click fast to make it happen).

  • Have upgraded to Snow Leopard. Pages icon still there but wont open, and i cant open my pages docs. Any ideas

    Have upgraded to Snow Leopard. Pages icon still on dock but wont open. Also I cant view my documents. Do I have to buy Pages from ITunes? Thankyou

    Good, use the disc. Also do the software updates. You can download from here http://www.apple.com/support/pages/
    and you don't need the Pages 4.1/ iWork 9.1 I downgraded from iWork 9.1 to iWork 9.0.5.

  • I cant change the old icloud mail to a new one because i have lost my password , and when i changed it in ap-id page it still remains the same, nothing changes .

    cant change the old icloud mail to a new one because i have lost my password , and when i changed it in ap-id page it still remains the same, nothing changes .
    What do do ????

    You do not have to call US, but you need to call. Or else.
    Contact Apple for support and service - Apple Support

  • Having downloaded the last OS and Pages i still cant open my Page-files

    Having downloaded the last OS and Pages i still cant open my Page-files

    You installed MacOS 10.10, didn't you?
    Reinstall Photoshop CS5 to replace the files damaged by the MacOS 10.10 installer.

  • Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

    Want to playback archived webcast recorded using Cisco webex recording. Downloaded Cisco webex meeting software from apple download page but still cannot play recording

    You will probably find better support about the features of the Webex app on their support page here: http://www.webex.com/products/web-conferencing/mobile-iphone-ipad-faq.html
    Doesn;t look like it's listed as a feature of the iPad app.

  • Update on all pages but still editable

    I have a navigation bar that is slightly different for each page of the site.  Based on the current page you are on, the corresponding navigation button is "pressed".  The problem is that I need to change parts of the entire navigation bar a lot.  For example, I may need to add a new button, or change the name on something.  Is there any way to update all the pages, but still maintain the ability to edit them?  It seems that when I try to use a template in order for it to update I cannot then customize it on specific pages.

    A persistent page indicator on your site-wide menu would be a better option.  That way you don't need to customize menus on each page.
    http://alt-web.com/Articles/Persistent-Page-Indicator.shtml
    DW Templates are OK for small sites -- under 50 pages.  But you must re-publish every page that uses the Template.
    Look at Server-Side Includes.  With SSIs you open the file containing your menu HTML.  Make changes.  Save and upload to server.   Done!  A huge timesaver.
    Server-Side Includes
    http://www.smartwebby.com/web_site_design/server_side_includes.asp
    More on Server-Side Includes
    http://forums.adobe.com/message/2112460#2112460
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • What's the fix for this CS4 message: One or more of the pages specified are not valid page names

    I'm trying to export two pages (a spread) as a PDF. I've tried a number of times, using various techniques, including exporting first to a .imx file. Each time I get this message: One or more of the pages specified are not valid page names.
    How can I get this to work?
    I can't attach the file because it is 11MB.
    Thanks,

    Are you using sections in your document? That may mess up your pagenumbering while exporting pages as spreads. Try to put + to front of page numbers... like  +12-+13 (into Export dialog´s page range field)
    Another option is go to Preferences > General and change pagenumbering view method from Section Numbering to Absolute Numbering.

  • Page hangs and submits twice

    I have page which has three on-submit processes. All of the processes call stored procedures. One of the process takes over 6 to 8 minutes and causes the page to hang and then times out, i.e. instead of showing the next page, I see "page cannot be displayed" message. Moreover, it seems that page has been submitted twice. The other strange thing is that stored procedures called by the page processes finish successfully even though the user do not go to the next page to see the results of the work accomplished by these store procedures.
    I have tried this experiment with a simpler page with one submit button which invokes one long running process when pressed. It seems when page hangs it submits again. I can attest this as there is a row being inserted by the stored procedure called by the on-sumbit process. I see this row being submitted twice with a time span of approximately 5 minutes (there is column for create_date and create_user).
    I have seen suggestions for using dbms_job for long running process, but this operation has to be done synchronously and user needs to see the results of the process on the next page. If the job is done asynchronously, then how can I refresh the hanging page and take the user to the result page.
    TIA,
    Salman

    Salman,
    There is an Apache timeout directive that you can increase, which should solve both problems. It looks like after the timeout the request is being retried, which may be the result of a different Apache directive. The access and error logs should show you some useful information about these cases. Some other reader might offer what those directives are, I'm not sure.
    That you are seeing the page processes complete even though the HTTP request times out is not strange. Once the server-side code is invoked, the request timeout cannot stop it.
    Scott

  • Trouble exporting PDF spreads..  "not valid page names"

    Regardless what I enter in the "range" section, I get an error that says: "one or more of the pages specified are not valid page names"
    How can i again export pdfs?
    I've tried entering "16-19" There usually is some "Sec" thing though I can't remember...
    can ANYONE please help me...
    Email me if you can @
    [email protected]
    I would really appreciate it...

    (^ LOL, a familiar name, I think? Just had lunch with Randy on Wednesday.)
    Ghary, this is usually caused by the prefix ID tends to put into section starts if you aren't paying attention. You have to address the pages by their full name, which most likely makes your page range something like "Sec 1:1 - Sec 1:16" (Steve's trick is actually easier by far if you have to leave them in for some reason).
    Best long-term fix is to go back to your section starts and delete everything out of the Section Prefix field. This is also nice in that the real page numbers get transferred to PDFs if you export instead of the weird "Sec 1:1" page numbers.

  • HT1677 i have enabled cookies on safari set as "visited" and certain web pages will still not open.. why ??

    I have enabled cookies on my iphone and ipad but some pages will still not open.. why is this?

    Which web pages are they?

  • After exiting proxifier software while web pages are still open in firefox, I could not open any web pages unless firefox is restarted. Plz help me.

    I have a problem with Firefox when using Proxifier software. When proxifier is runing and I'm browsing web pages with firefox all things is OK. But after exiting proxifier while web pages are still open in firefox, I encounter a problem. In spite of the internet is still connected but my firefox could not open any web pages unless firefox is restarted.
    You are kindly requested help me how to solve this problem not to restart firefox.

    Hi,
    [http://proxifier.com/ Proxifier] seems to be a transparent proxy. So you could try setting '''No proxy''' in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Options''' > [https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption Advanced] > '''Network''' > '''Settings'''.
    PS: A quick way to restart Firefox is to press [https://developer.mozilla.org/en-US/docs/Tools/GCLI '''Shift''' + '''F2'''], type '''restart''', and hit '''Enter'''.
    [https://support.mozilla.org/en-US/kb/Options%20window Options]

  • Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.

    Hello. I have an iphone 5s and i can not activate imessage nor facetime. I followed all the steps provided by the apple page and still i can not make it connect. The phone is connected to wifi at all times and has ios 8.

    Can you send SMS by using the mobile data network instead of Wi-Fi? I had the same problem setting up my 5s from a backup of my 4s. Only after I sent an SMS via mobile data network, somehow iMessage and FaceTime got activated a couple of minutes later without me doing anything else.
    I even changed my Apple ID password, because at one point I could not log into my account when iMessage asked for my account details.
    If you have difficulty activating FaceTime or iMessage - Apple Support

  • I tried to upgrade to the latest version of Firefox but on the Firefox start page is still says "you are not on the latest version of Firefox, upgrade now"

    I tried to upgrade to the latest version of Firefox but on the Firefox start page it still says "you are not on the latest version of Firefox, upgrade now". The start page looks different so maybe it did upgrade but why does the reminder still show?

    You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. It appears that page is no longer being maintained by Google. You appear to have the latest Firefox version.
    '''If you want the Google search page as your home page,''' change your home page to '''''about:home''''' (a new, updated version of the old Google/Firefox home page is now built-in to Firefox).
    *See --> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    Also see --> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version<br />
    You can also see your version on the ''Help > Troubleshooting Information'' display
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You may need to update some plug-ins. Check your plug-ins and update as necessary:
    *Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
    *'''''Shockwave Flash''''' (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
    *'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

  • My iwork suite of apps wont update.  pages is still 4.1 and software update doesnt catch it.  I also cant buy it from app store because it says its already installed on this system...any ideas?

    my iwork suite of apps wont update.  pages is still 4.1 and software update doesnt catch it.  I also cant buy it from app store because it says its already installed on this system...any ideas?  thank you

    I'd be posting in the iWork forums.

Maybe you are looking for

  • Slow Shutdown after Mavericks upgrade

    My macbook pro takes longer to stut down than it used to do.  Before Mavericks it took about a second to shut down.  Now it takes at least 10 seconds.  Below is my system log  and below that is an etrecheck scan result.  Any help in restoring the shu

  • What cable do i need to download from pc to ipod

    I bought an ipod shuffle & it came with a USB cable. The ipod only has a hole at the side of it that is the size of headphones but the cable I got with my purchase is much wider (like a camera charger) I am a complete novice & have probably used the

  • My program wont open

    when i open my wimax program appear "SDK Init or open fail "  my program is ( mada xenon CM) it was work but next week when i open it show me "sdk init or open fail "

  • I believe the logicboard of my Pro is going out... How much would a replcement board and instalation cost me?

    Same as the crazy title says... I just want to know the answer to the question... I'm honestly getting frustrated at Apple's Support Communities... Having to sign in 40 times before I got this far... Anyway! Please, I just want to know if I should ju

  • Set messages locally in ADF

    JDeveloper 11.1.2.4 I using inputdate component in jspx and a converter date time. <af:inputDate  id="id1">                <af:convertDateTime pattern="dd/MM/yyyy" secondaryPattern="ddMMyyyy"                                      messageDetailConvertD