Validity slice is not correct for non-cumulative cube

Hello Expert,
There are two non-cumulative cube, say cube1 and cube2. Cube2 has only one more dimension of PLANT than Cube1.
Cube2 is copied from cube1 and change the char of validity.
Cube1 & cube2 use the same fill data source. That is, first load with opening balance and second with delta.
char of validity for cube1: calendar day & material
char of validity for cube2: calendar day & plant.
The query based on cube1 works well. To say cube2, the validity slice(in TXN RSDV or TBL /BIC/TCUBE2) is not correct. There is only one record which contains BLANK plant.
There are plants in F table.
I tried the following steps to recovery the validity slice, however, it made no sense.
1) PGM RSDG_CUBE_VALT_MODIFY to rebuild the validity slice structure
2) FM RSDV_VALID_RECREATE with I_REBUILD_FROM_FACT = 'X' to create validity slice from fact table.
Would you please suggest?
Thanks
XY

Hi XY,
For sure, running the RSDV_VALID_RECREATE function module in SE37 will recreate the validity table. And you can use the parameter "X" in the parameter I_REBUILD_FROM_FACT if the entire fact table should be read.
Also, to change the validity slice manually in tcode RSDV you should:
- overwrite the column 'To mode' with a 'F', which mean Fixed
- & then the 'Fixed to time' with your new value.
There is a program which allows you to modify it: Program > RSDG_CUBE_VALT_MODIFY
At
Nadja Xavier

Similar Messages

Define the Characteristics of the validity table for non-cumulatives

Hi Friends,
Here I am designing MultiProvider ( ZCA_M01), based on the Two Business content info cubes (0IC_C03 & 0SD_C03 ) & one customized info cube (ZPUR_C01).
I done Identification for char & keyfigures also.
When i trying to activating the Multiprovider, here i am getting the error , error message is : Define the Characteristics of the validity table for non-cumulatives.
Even here I am attaching the error message help also.
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.
Please take as a high priority.
Thanks & Regards,
Vanarasi Venkat.

Hi Venkat,
If you want to include 0IC_C03 cube in your multi provider the you must make sure that the time characterestics ( 0CALDAY, 0CALMONTH ....) are present in all of the other info providers which you are including in the MP. The Time char to choose depends upon the Inventory cube in which you have mentioned during the definition. As you are using the standard cube 0IC_C03 it has the time char as 0CALDAY. Try to include this in all the other info providers and dont include more tha one Non-cumulative in the MP.
Try this and see if it helps....

"initial non-cumulative for non-cumulative values" is not available in DTP (0AFMM_C02)

Hi Experts,
We are working for BI implementation for AFS Industry,
when we are working on AFS specific inventory cube 0AFMM_C02 , we are facing stock mismatch problem
for AFS Stock initialization we are using the data source 2LIS_AF_STOCK_INITALIZATION instead of 2LIS_03_BX, this data source is specificly designed for AFS
when we are extracting the data using 2LIS_AF_STOCK_INITALIZATION for stock initialization and
2LIS_03_BF data source to load the Moments.
we compressed cube with Marker update for 2LIS_AF_STOCK_INITALIZATION data load(by deselecting the No marker update check box)
we compressed cube with No Marker update for 2LIS_03_BF historical data load(by selecting the No marker update check box)
we compressed cube with Marker update for 2LIS_03_BF Delta data load(by deselecting the No marker update check box)
Now we are facing stock mistach problem, we found reason for this
"initial non-cumulative for non-cumulative values" option is not available in DTP only Delta & Full options are available
and infopackage of 2LIS_AF_STOCK_INITALIZATION data source also has "Full update" instead of "Generate Intial Status"
Please let us know how can we get the "initial non-cumulative for non-cumulative values" option in the DTP level.
Regards,
Chandra

Hi Chandrakumar,
We are facing the same problem, how do you solve it?
Regards,

Validity Table in Non cumulative cube

Hi Friends,
What is the use of validity table in Non cumulative cube?
I have already studied the document 'How to Inventory
Please can any one explain me with example.
Thanks & Regards,
Ramnaresh.P.

Hi,
Validity table is created for non-cumulative key values.
Non cumulative key figures are one which are not possible to cumulate such as head count, inventory amount, these are always in relation to a point in time.
Regards,
Shiva.

Intregarted Planning Design for Non-Cumulative Key Figures

Hi,
I have a requirement where i have to design a planning layout for a Invenotry Scenario (Using Non cumulative Key Figures).
What should be the factors i should consider in my design specifically for non cumulative ke figures and how it is different from design for a regular (cumulative) key figure
Thanks
Rashmi.

Thanks for your response. My requirement is to design a retail inventory planning application in which one of the KPI's planned is stock price which is a non cumulative key figure and i am trying to figure out how than can be planned if non-cumulative key figures are not allowed in planning
Thanks
Rashmi.

Work around for including Non cumulative cube in an infoset.

Hi Experts,
I have 4 non cumulative infocube in my production, for another reporting purpose I have to use those non-cumulative cubes combining another DSO in an infoset, but the infoset is not allowing me to include non cumulative infocube in it.
The non-cumulative infocube contains 2 non cumulative keyfigures, those keyfigures are needed for my new reporting, to get the infoset logic(inner join) is there any other possible way to get the data ?
Please let me know. your valuable input will be appreciated. Thanks in Advance.

Hi Kalpana,
Try with multiprovider.
Otherway round could be creating DSO and creating transformation from DSO as well as non-cumulative infocubes (full update) and report on newly created DSO.
Hope that helps.
Regards
Mr Kapadia
*Assigning points is the way to say thanks*

It says my apple id is valid- my ipad not qualified for i cloud

when i sign into i cloud it give this msg :my apple id is valid- my ipad not qualified for i cloud
what do i do now ?

When you say "deleting app", which app are you talking about? And what, exactly, is the error message you are getting and from which app?

Excise tab not appearing for non cenvatable po

Hi All,
while doing MIGO , the excise TAB is appearing for cenvatable items.
but in case of non -cenvatable item this TAB is not appearing in MIGO, is it like this.
i have maintained in J1ID the excise material type as non-cenvatable. the excise tab is not appearing in MIGO.
If i want to have excise tab in MIGO for non cenvatable material, what has to be done ?
pl guide
regards

thanks,
I have maintained every thing, this TAB is coming for cenvatable material, but not coming for non-cenvatable material.
the material is excisable but we are not taking cenvat credit. so we have maintained it as non-cenvatable in j1id.
Any reason that for the exciseable material where we are not taking cenvat credit, this TAB is not appearing?
pl reply
regards

Query for Future period on a non cumulative cube

Hi Colleagues,
I have a non cumulative cube. It has data till June,2006. When I query on the cube to report the balance with period as "July,2006" it doesnot return anything. What I expected is that it would show me the balance value as of June,2006 which is the last period for which there is data.
Am I missing anything ?
Regards,
priyadarshi

If you filter by jul06 and there is no data in cube, no matches with selection happens. You need to select any data to apply calculation of balance, try to select a range of months, with an offset.
Maybe if you put the month in free characteristics instead in filter section ir worked.

When do you go for non cumulative key figures?

hi all,
Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
Can anyone explain me with an example.
thanxs in advance
hari

Hi,
chk these threads:
non cumulative key figures
Cumulative and Non-cumulative Key Figures
also,
There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Assign points if this helps!!
Regards,
Dhanya.

OTO information not complete for non ABAP instance of system &1 in SMSY

Hello,
We have just applied Stack 23 and stack 24 to our Solution Manager system. When we are executing action System Logon from a ticket we are getting the following error:
OTO information not complete for non ABAP instance of system &1 in SMSY
We checked that this new message was created in note Note 1427761 - ChaRM: incorrect target system for action "System Logon".
We went to the SMY transaction to the Product System definition for our system but we could not find which OTO information is missing there, where to load it, etc.
We appreciate your help.
Regards
Esteban Hartzstein

Hello,
We have not applied the note separately, but we applied the support packages, so all the changes were applied, and therefore we are getting this error message of "OTO information is not complete ....
We have updated as suggested the info regarding the system in the SMSY. We have read the Remote System Data.
We will run SOLMAN_SETUP again to review the setup, and then test again
We appreciate also if you provide any additional input.
Regards
Esteban Hartzstein

Oracle validated package is not available for OEL5

Oracle validated package is not available for OEL5 yet. Does anyone know when it will be available?
Available now:
oracle-validated-1.0.0-3.el4.i386     Oracle Software for Enterprise Linux 4 (i386)
oracle-validated-1.0.0-3.el4.x86_64     Oracle Software for Enterprise Linux 4 (x86_64)
oracle-validated-1.0.0-4.el4.i386     Oracle Software for Enterprise Linux 4 (i386)
oracle-validated-1.0.0-4.el4.x86_64     Oracle Software for Enterprise Linux 4 (x86_64)

Looking forward to the release. Will the release also include updates for 11g readiness and validation?

Simulation engine failed to start: A valid license was not found for simulation

Hi,
I'd like to run xsim by clicking "Run Simulation" in Vivado 2015.2 . However, in the Tcl console I see this error:
INFO: [Common 17-186] '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav/xsim.dir/ProgNetwork_behav/webtalk/usage_statistics_ext_xsim.xml' has been successfully sent to Xilinx on Mon Jul 13 16:01:02 2015. For additional details about this file, please refer to the WebTalk help file at /home/rob/sw/xilinx/xilinx-build/Vivado/2015.2/doc/webtalk_introduction.html.
INFO: [Common 17-206] Exiting Webtalk at Mon Jul 13 16:01:02 2015...
run_program: Time (s): cpu = 00:00:08 ; elapsed = 00:00:10 . Memory (MB): peak = 6669.582 ; gain = 0.000 ; free physical = 763 ; free virtual = 18006
INFO: [USF-XSim-4] XSim::Simulate design
INFO: [USF-XSim-61] Executing 'SIMULATE' step in '/home/rob/xilinx-projects/bright_proj/bright_proj.sim/sim_1/behav'
INFO: [USF-XSim-98] *** Running xsim
with args "ProgNetwork_behav -key {Behavioral:sim_1:Functional:ProgNetwork} -tclbatch {ProgNetwork.tcl} -log {simulate.log}"
INFO: [USF-XSim-8] Loading simulator feature
Vivado Simulator 2015.2
ERROR: [Simtcl 6-50] Simulation engine failed to start: A valid license was not found for simulation. Please run the Vivado License Manager for assistance in determining which features and devices are licensed for your system.
Please see the Tcl Console or the Messages for details.
However, if you look at the attached image, you'll see that my installed licenses include the license name "Simulation".
Why is Vivado complaining about "Simulation engine failed to start: A valid license was not found for simulation" ?
Thank you,
Rob

Hi Rob,
The reason for the license error is: Hostid mismatch. i.e., the hostid of the machine is different from the hostid in the license file.
I observe that the license file is generated with hostid: 52540019ee7e. You can cross check your hostid of the machine by running the command: lmutil lmhostid
You can rehost the license file using the steps mentioned in the section "Rehost or change the license server host for a license key file" in the following user guide: http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_5/irn.pdf
Thanks,
Vinay

Artwork on my iPad does not match iTunes and is not correct for movies, TV Shows Nd some songs

Artwork on my iPad does not match iTunes and is not correct for Movies, TV Shows and some songs & Albums. Is this issue resolved? If so what was or is the fix. I have not been successful in locating that. I found posts stretching back into late 2010.

most of these items were downloaded from eihter iTunes or in the case of movies, imported into the app and then loading them to TV Series or Movies as appropriate. They were all fine until about two days ago when I did a sync. Then the artwork went haywire. I tried manualy removing and replacing the artwork in iTunes with the correct jpg's. and then re-sync. iTunes shows everything OK, but the iPad is the one with it all messed up.

Activation error on Multi Provider which has Non-cumulative Cube

Hi,
My company has upgraded the BI 7.0 from 3.5.
It is working fine so far.
But I met the below message and could not activate it when I generate the multi provider which has Non-cumulative Cube.
Define the characteristics of the validity table for non-cumulatives (Message no. R7846)
And then I checked the Single cube but Single cube has no error.
I think this is program error and searched the notes in OSS but could not find.
Does any expert know this issue?
Thank you.

Hi lee,
validity slice tables need to be defined for cubes using non cumulative key figures.
In this we need to specify the characteristic combination on which this table has be maintained.
The maintanence can be done from cube change mode, menu bar extras--> maintain non cumulative values.
This table constantly gets updated with validity dates as we upload data.
An report on this can be seen in tcode RSDV.
Naveen.A

Validity slice is not correct for non-cumulative cube

Similar Messages

Maybe you are looking for