Value categories integration with CS-PM
Hello guys,
Initially, I didnt assign cost element to value category in CS module and it was posting on this cost element. If I assign cost element, the posting in the past will not be updated on CS order in IW33 retroactively. So, is there any way to update these postings retroactively in IW33, maybe some program ...
Regards
Manjo
You must reconstruct table PMCO for the orders concerned by using report RIPMCO00.
If required reconstruct the information structures by report RIPMS00.
Regards
Sreenivas
Similar Messages
-
Enterprise Asset Management (EAM) Integration with FI/CO
Hi,
Enterprise Asset Management (EAM) integration with FI/CO Configuration process tell me any one.
Regards,
Surendra.Hi,
Costing Integration with PM / EAM:
1. Under Costing Data for Maintenance & Service Orders:
Costing Variants, Valuation Variants, Costing Sheet, Assignment of costing variants to Order types
2. General Order Settlement
Settlement Profile, Allocation Structure
3. Settings for Display of costs
Value Categories, Cost elements assignment to value categories
Regards,
Maheswaran. -
Service desk integration with 3rd party tool
Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietschcan you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…
-
Session keep Alive when EBS is integrated with OIF acting as SP
We have an E-Business Suite R12(12.1.3) Application which is integrated with Oracle Access Manager 11.1.1.5. For authentication the Oracle Access Manager delegates the authentication request to Oracle Identity Federation acting as a Service Provider (SP). There is a home-grown SSO which acts as the Identity provider by Federating it with OIF using SAML 2.0 protocol.
The integration is successful and EBS is able to authenticate using this third party SSO.
Now there are multiple applications which are integrated with this third party SSO and the user can access any of these applications including EBS.
Considering a scenario where a user is using EBS Application say for more than 30 mins. Now when he tries to login to another application the challenge screen is thrown though he can continue to work on EBS without any issue. The reason being that the session timeout on the IDP side is set to 30 mins.
To overcome this issue the solution that has been thought of using a javascript for each page load on the application which will update the SSO token with the latest UTC time on the IDP server. This has been successfully done for all other applications except EBS.
So my question is how we can call this java script for each page load for EBS?
Thanks & Regards
SarbashisIt appears that OAM is removing the url parameters for the p_done_url sent to it by OIF.
302 Redirect to -> Location: https://sso.mycompany.com/oam/server/logout?p_done_url=https%3A%2F%2Fsso.mycompany.com%2Ffed%2Fuser%2Fsloosso%3Fid%3Dosso%26type%3D3&invokeOSFSLogout=false
Result: 200. Set-Cookie OAM-ID to expired.
Form Submits: https://sso.mycompany.com/fed/user/sloosso
Result: 500 Error
Notice the p_done_url value in the redirect has extra parameters which when the Form is submitted are lost.
If I manually enter the url: https://sso.mycompany.com/fed/user/sloosso?id=osso&type=3&invokeOSFSLogout=false
Then I am successfully logged out.
This seems almost like a bug in OAM... -
Image not showing in Abobe integrated with Java WebDynPro
Hi All,
Image is not showing in Abobe integrated with Java WebDynPro.
I did the following:
Added the image field in adobe form. in URL value set the value of context node binding. Binding set to none and size set to Use Original Size.
Then in script editor i wrote
this.value.image.href = xfa.resolveNode(this.value.image.href).value;
at innitialize , javascript and client.
I can see the image from the same url context value if image field is created directly in WebDynPro View.
Can anyone suggest what is missing?
Thanks and Regards,
NuzhatTry changing your line of code for this one
this.value.image.href = xfa.record.Images.URL;
Check that the url passed by scripting is correct with a messageBox for example.
You can also try assigning a hardcoded url at scripting level to check if its works.
Best regards, Aldo. -
SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time
we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra ThotaHi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support -
Error while running SSRS 2012 report integrated with SharePoint 2013
Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
ThanksHi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support -
Integration with mm,sd ,pp
HI,
ALL
I need to now the integration betwwen sd mm pp with fi co i am going to work on an implementation project pls give clear explanation with all steps in all modules related to integration with fi/co. and pls give the effect for field selection in other modules except fi. i am an fi consultant but never worked on integration area . pls send the needful information to this mail id
[email protected] .
thank u all
Regards
chandra.Dear Chandra,
Visit the following links:
http://surya-padhi.net/documents/fi_mm_integration.pdf
http://surya-padhi.net/documents/fi_sd_integration.pdf
http://www.sap-img.com/sap-sd/link-between-sap-sd-mm-and-fi.htm
FI_MM:
1) Define plant OX10
2) Define division OVXB
3) Define storage location OX09
4) Maintain purchasing org
5) Assign plant co code OX18
6) Assign bus area to plant/valuation area and division OMJ7
7) Assign purchasing org to co. code OX01
8) Assign purchasing to plant OX17
9) Create material grp OMSF
10) Creation of purchasing grp OME4
11) Maintain co. codes for material mgt OMSY
12) Define attributes of material types OMS2
13) aintain plant parameters
14) Set tol limits for price variance for purchase order
15) Set tol limits for goods receipt OMC0
16) Maintain default values for tax codes OMR2
17) Set tol limits for invoice verification OMR6
18) Define automatic status change for invoice verification in background
19) Group together valuation areas OMWD
20) Define valuation class OMSK
21) Creation of G/L masters FS00
22) Assignment of accts for automatic postings OBYC
23) Doc types and No. ranges OBA7
24) MM vendor master creation XK01
25) Material master creation MM01
26) Creation of purchase order ME21N
27) Goods receipt MIGO
28) To view material doc MB03
29) Invoice verification MIRO
30) Goods issue for consumption MB1A
31) To view material ledger MB5B
FI-SD:
The basis of the sales process is the sales order. After receiving an inquiry from a customer a sales order has to be created to start the process.
The sales order is generated on the level of the distribution chain. The ordered items may belong to different divisions. The sales order is an SD document and does not lead to posting in Financial Accounting.
After the sales order is entered, the system performs an availability check for the desired delivery date.
At the day of the shipping , a delivery document is created. The delivery is not ready for billing before the goods are picked from the warehouse inventory and posted as goods issue.
For the picking process, the warehouse management functionality is used. A warehouse transfer order has to be created which generates the picking request. The requested goods are picked from the warehouse and prepared for the delivery.
The goods to deliver are posted as goods issued . A goods issue document is created in MM and an accounting document is created in FI to post the goods issued on the right G/L accounts.
The concluding activity in Sales and Distribution is billing . A billing document is created in SD and a printed invoice is sent to the customer. Simultaneously, an FI document is generated to post the receivables and revenues on the right accounts.
1)Insert regions OVK2
2)Define sales organization OVX5
3) Define distribution channel OVX1
4) Define shipping point OVXD
5) Assign sales organization to co.code OVX3
6) Assign distribution channel to sales organization OVXK
7) Assign division to sales org OVXA
8) Assign sales org/distribution channel to plant OVX6
9) Assign shipping point to plant OVXC
10) Setup sales area OVXG
11) Define rules by sales area OVF2
12) Define pricing procedure determination
13) Define tax determination rules
14) Creation of G/L accts FS00
15) Assign G/L accts VKOA
16) Setup partner determination
17) Assign shipping points OVKC
18) Creation of SD customer master XD01
19) Creation of finished goods material master MM01
20) Maintain condition types VK11
Regards,
Naveen. -
Dear friends,
Please provide me process/steps the Realtime Fi integration with MM.
its very helpful for me.
Thanks in advance.FI-MM Integration
Main screen of FI-MM integration is OBYC
Here we have to link the MM movement types to FI G/L accounts
Points to know : Movement Types, Assignment of Movement types to T-keys (T-code OMJJ), Value string (I also need some information on this) , OMWN and OMWB transactions.
There is a close integration b/w FI & MM, actually document flows from MM to FI in the following areas such as,
1. Movement Types:
Used to enable the system to find the predefined posting rules determining how the accounts of financial accounting system are to be posted & to update the stock fields in the matrl master data.(Goods Receipt, Goods Issue, etc)
2. Valuation Class:
Assignment of material to grp of gl account, used to determine the gl accounts that are updated as a result of goods movement.
3. Transaction/Event key:
Used to control the storage or filing of documents & assignment of documents.Used to differeniate b/w various transactions such as goods movement tht occur in inventory.
4. Material Type:
Each material should assign mtrl type in mtrl master record used to update whether changes made in qty are updated in material master record & change in value also updated in stock account
Process Flow in MM
Step 1 Generating purchase requisition( PP-MM involved)
Step 2 Making inquiries (MM)
Step 3 Raising purchase order (MM)
Step 4 Release of purchase order ( MM)
Step 5 Goods received from vendor ( MM and FI )
Entry will be
Raw Material Inventory a/c Dr.
GR/IR clearing a/c Cr.
Step 6 Invoice verification and quality assurance (FI and MM)
Entry will be
GR/IR clearing a/c Dr
Vendor a/c Cr
Step 7 Goods issued for consumption(MM, FI and PP)
Entry will be
Raw material consumption a/c Dr
Raw material inventory account Cr
Step 8 Production receipt( FI, MM & PP)
Entry will be
Finished goods inventory a/c Dr
Change in stock Cr
Step 9 Finished goods delivered to customer(MM, SD & FI)
Entry will be
Change in stock Dr
Finished goods inventory a/c Cr
Step 10 Raising invoice on customers( SD & FI)
Customers a/c Dr
Sales a/c Cr
Step 11 Receipt of payment from customers( Same as SD-FI integration) -
Brief discussion on SAP XI and its' Integration with SAP MDM.
Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik BanerjeeHi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
- For lookup table extraction
- Output in XML format which MDM can import without using XI.
- FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
- For Main table records.
- Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja -
SharePoint 2013 on-premises integration with third party email account
the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech LearnerHi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Web Dynpro integration with R/3
Dear all,
We have the following requirement in Web Dynpro integration with R/3
We have to update the local SQL tables based on R/3 system return values. R/3 system should call the webdynpro business method for updating local SQL Status table. In the R/3 system after purchase order is created, via user exit it should call and update some fields in the local SQL tables. To solve this problem we have thought of following solutions possibility:
1. In R/3 system based on user exit, it calls the ABAP Proxy -> XI (SOAP Adapter) -> Web Dynpro Web Service in WebAS-> XI -> ABAP Proxy -> User exit PO continues.
2. In R/3 system based on user exit, it calls directly web service then web service goes to user exit.
3. In R/3 -> user exit -> ABAP Proxy JDBC Adapter -> SQL stored procedure call - > user exit.
Please give your valuable suggestion or any other options to solve above problems.
And another one question is how to create web service and deploy into WebAS through webdynpro project?. Kindly guide us to the correct document for creating webservice through webdynpro or any other related url link.
Advance thanks,
S.Saravanan.Hi Sarvanan,
Please refer to the following link for help on webservice,
Creating webservice, http://help.sap.com/saphelp_nw2004s/helpdata/en/db/99c04ba22fe64f96a8651df68eab92/frameset.htm
Consuming a Web Service in JAVA,
http://help.sap.com/saphelp_nw2004s/helpdata/en/81/12703e5da3e946e10000000a114084/frameset.htm
Consuming webservices in webdynpro,
http://help.sap.com/saphelp_nw2004s/helpdata/en/91/9c2226df76f64fa7783dcaa4534395/frameset.htm
I feel once you go through these links you yourself will be in a much better position to decide upon to your design options.
Reply back for more help,
Guru. -
Problem about BIEE Integration with LDAP
Hello,
I have a problem in OBIEE11.1.1.6
I do BI EE 11g Security Integration with OPENLDAP follow below link,
http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-security-integration-with-microsoft-active-directory/
It works well using user that store in OPENLDAP ,
now I want to realize this function,
that user roles store in external db table,then get roles by init block,
but I faced a problem, If I use session system variable 'WEBGROUPS' to get some value in db,when user login BIEE,it can get values of 'WEBGROUPS'
but If I use session system variable 'ROLES' ,when user login BIEE,it can't get values of 'ROLES' that store in db,
the value will always show 'BIConsume;Authenticated User',It is default value in OBIEE11.1.1.6,
so I doubt way I can't user variable 'ROLES' to get value???
init block lik follow,
SQL: select T.att1,T.att2 FROM USER_ACCESS T
T.att1 is for variable 'WEBGROUPS'
T.att2 is for variable 'ROLES'
the value of 'WEBGROUPS' is correct.
but 'ROLES' not got the values that stored in db.
anyone know???
thank you in advance!VITAS wrote:
that user roles store in external db table,then get roles by init block,
but I faced a problem, If I use session system variable 'WEBGROUPS' to get some value in db,when user login BIEE,it can get values of 'WEBGROUPS'
but If I use session system variable 'ROLES' ,when user login BIEE,it can't get values of 'ROLES' that store in db,
the value will always show 'BIConsume;Authenticated User',It is default value in OBIEE11.1.1.6,
so I doubt way I can't user variable 'ROLES' to get value???
init block lik follow,
Go to Enterprise Manager and create the ROLES named the same as the one you named in DB values. Now you should see them magically appear when you click on My account > Roles and Catalog Groups. :)
SQL: select T.att1,T.att2 FROM USER_ACCESS T
T.att1 is for variable 'WEBGROUPS'
T.att2 is for variable 'ROLES'
the value of 'WEBGROUPS' is correct.
but 'ROLES' not got the values that stored in db.Hope you did you enable Row Wise Init here ?
Let us know. Mark if helps.!
Thanks,
SVS -
Define a Standalone Download Integrator with an Additional Where clause - SQL error
Hi,
I am trying to create a standalone integrator with an Additional Where clause. Followed the steps mentioned in the metalink note 360105.1. When I run the integrator, I get the following error message.
Please resolve the following error to continue.
SQL error: ORA-00936: missing expression occurred
processing stored SQL for Content 20007:GENERAL_441_CNT.
When I look at the log file, here is what I can see:
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 TRACE BneHrSQLControl - SQL:SELECT FROM PER_PEOPLE_V where last_name=$PARAM$.last_name
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 TRACE validateSQLStatement value of sqlStatement is: SELECT FROM PER_PEOPLE_V where last_name=:RSQLP1
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 DETAIL BneHrSQLControl.validateSQLStatement() paramName: last_name
10/22/14 10:50 AM AJPRequestHandler-HTTPThreadGroup-15 DETAIL BneHrSQLControl.validateSQLStatement() error in SQL: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
So, clearly, the SQL statement that is getting built internally is wrong. Ideally, I would expect the statement to be something like this:
SELECT * FROM PER_PEOPLE_V where last_name=$PARAM$.last_name.
RDBMS : 11.2.0.3.0
Oracle Applications : 12.1.3
Any pointers towards the resolution of the issue would be of great help.
Thanks in Advance!
Lalitha.This is a duplicate post of your other question: create trigger automatic
DO NOT start duplicate threads for the same question.
Locking this thread -
Hi.
Has anyone successfully integrated with LDAP using the C library from
LDAP SDK?
Currently I'm facing a problem when I tried to generate the C++ wrapper
for the C library. The compiler is unable to resolved the data type of
some data structs. This is because the definition for these structs are
not defined in any of the include files provided. According to the LDAP
SDK doc, this is because the fields for those data structs are not
intended to be accessible to the clients.
That is why in my wrapper project, I defined these struct, each has the
property Opaque = TRUE.
The following is the error message:
BEGIN FILE
Working directory is d:\forte\tmp\cg13\pc_nt\ldapsrch
Processing BOM file: LDAPSrch.bom
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 11.00.7022 for
80x86
Copyright (C) Microsoft Corp 1984-1997. All rights reserved.
LDAPSrch.cc
LDAPSrch.cc(70) : error C2027: use of undefined type 'BerElement'
LDAPSrch.cc(127) : error C2027: use of undefined type 'LDAP'
LDAPSrch.cc(184) : error C2027: use of undefined type 'LDAPMessage'
LDAPSrch.cc(203) : error C2733: second C linkage of overloaded function
'ldap_init' not allowed
LDAPSrch.cc(204) : error C2733: second C linkage of overloaded function
'ldap_simple_bind_s' not allowed
LDAPSrch.cc(205) : error C2733: second C linkage of overloaded function
'ldap_perror' not allowed
LDAPSrch.cc(206) : error C2733: second C linkage of overloaded function
'ldap_search_s' not allowed
LDAPSrch.cc(207) : error C2733: second C linkage of overloaded function
'ldap_first_entry' not allowed
LDAPSrch.cc(208) : error C2733: second C linkage of overloaded function
'ldap_next_entry' not allowed
LDAPSrch.cc(209) : error C2733: second C linkage of overloaded function
'ldap_get_dn' not allowed
LDAPSrch.cc(210) : error C2733: second C linkage of overloaded function
'ldap_first_attribute' not allowed
LDAPSrch.cc(211) : error C2733: second C linkage of overloaded function
'ldap_next_attribute' not allowed
LDAPSrch.cc(212) : error C2733: second C linkage of overloaded function
'ldap_get_values' not allowed
LDAPSrch.cc(213) : error C2373: 'ldap_value_free' : redefinition;
different
type modifiers
LDAPSrch.cc(214) : error C2733: second C linkage of overloaded function
'ldap_ber_free' not allowed
LDAPSrch.cc(215) : error C2733: second C linkage of overloaded function
'ldap_msgfree' not allowed
LDAPSrch.cc(216) : error C2373: 'ldap_memfree' : redefinition; different
type modifiers
LDAPSrch.cc(217) : error C2733: second C linkage of overloaded function
'ldap_unbind' not allowed
cl /W3 /Gf /GX /MD /c /Ob1 /vmg /DSTRICT /DWIN32 /D__WIN32__
/DLIBOO_DLL
WIN32_LEAN_AND_MEAN /Id
:\forte\install\inc\cmn /Id:\forte\install\inc\os
/Id:\forte\install\inc\ds
/Id:\forte\install\inc\handles /Id:\forte :\forte\LdapAPIs\include
/FoLDAPSrch.obj /Tp LDAPSrch.cc
So, please advise on how should I proceed.
Thanks in advance.
from: suen
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi Anoop,
To adapt an SAP Workflow, you can create a configuration. In this configuration you can redefine values for steps of the workflow definition. These values are evaluated at runtime instead of the values originally defined.
You can configure the following step types:
Activity
User decision
Document from template
Wait
Moreover,Features
You can set the following data individually in the step definition of the configurable step types:
1)Responsible agents
2)Excluded agents
3)Message recipient for completion
4)Priority
5)Requested start
6)Indicator denoting whether the step is included in the workflow log
7)Activation of a latest end, a latest start, or a requested end with the reaction Send mail
This URL privides info about various workflow codes http://help.sap.com/erp2005_ehp_02/helpdata/en/9b/572614f6ca11d1952e0000e82dec10/content.htm
Regds,
Krutarth
· Reference date/time for latest end, latest start, and requested end
· Message recipient for missed deadline
· Information about the work item display
Maybe you are looking for
-
BT can't fix and won't let me cancel!
Since the 18th of April we have had either no connection or intermittent connection on our BT services of phone, BT you view & unlimited broadband. I have spent hours on the phone to India, had at least six engineers visit and still have a noisy phon
-
Hi all, I have been trying everything to boot a G4 mirrored front to boot from the CD that it came with. I have tried the new keybord all kind of keys pressed. I had the same problem on 2 new G5's apple care tech's had me type something into terminal
-
Steps to upgrade 10.6.8 to 10.8.5
It may sound redundant for some of you but I have to ask the question. We have 10 computers to upgrade here and I don't want to either waist time or money in the process. So the question is: waht are the stpes to upgrade from 10.6.8 to 10.8.5? I read
-
How do I change the default search engine on the Mozill Start Page?
Yahoo has hijacked my start page search bar. I followed the advice in the answers to other yahoo related question, and now the start page search bar doesn't function at all and the upper search bar still default to yahoo.
-
Scrolling, and Adaptive Layout help
Hi guys, I am new to edge animate, I would like to know, like when a person scrolls its scrolls to a cirtain point seemlessly, not like when you are using a mouse, like blobk by block. also I would like to know more about adaptive layout, if anyone c