Value help dropdown list not showing up other values

Dear all,
I'm new to Adobe and Java WD. I managed to go through all the tutorials and developed a WDJ and embedded an interactive form in the view. I also used an RFC Model to pull some values from n R/3 table and populate in a context node element.
These values are appearing perfectly fine in the WDJ if I'm using a table or a drop down list index field.
But in the Adobe form, when i bind this context node to a WebDynpro native Value help drop down list box, only the first value of the table appears. On clicking on it, nothing happens. I'm not sure what is the problem.
Can anyone please help me in this? Should i write some code to bring the other values too? (the tutorial doesn't say this!)
If so, then please give some sample java codings and step by step process for populating the field values with the table values.
My node structure is like below
Context
     Ysam_Get_Values_Input(Node-RFC)
          Output (Node-RFC O/P)
               Values(Node-table from the RFC)
                   Slno (attribute that has the values to be populated with)
Any help is greatly appreciated.
Thanks,
Sam

Hi Raja,
In the view:
<htmlb:gridLayoutCell id                  = "AddedProfileNameIF"
                                    columnIndex         = "2"
                                    rowIndex            = "2"
                                    horizontalAlignment = "LEFT"
                                    verticalAlignment   = "MIDDLE" >
                <htmlb:dropdownListBox id         = "added_profile1"
                                       helpValues = "//model/ust10st.profn"
                                      />
              </htmlb:gridLayoutCell>
In the Model:
method MODEL_INIT .
select profn from ust10s into  table UST10ss.
read table UST10ss index 1 into UST10st.
endmethod.
In controller:
METHOD do_init .
  m_model ?= create_model( model_id = 'm'
                           class_name = 'zcl_model_zsox1' ).
m_model->model_init( ).
ENDMETHOD.

Similar Messages

  • RUEI 12.1.0.3.0 - Dropdown List Not Showing Correctly in Session Replay

    Hello all,
    While using Session replay, I found out that dropdown boxes/menu does not work in Session replay mode. I am using RUEI to monitor oracle.com
    Anyone has a similar experience? Care to assist, please?
    Regards,
    Nathan
    Edited by: 959447 on Dec 12, 2012 5:30 PM

    Hi Nathan,
    java script execution can be in disabled state to prevent you from actively differentiate the execution path other than the original session. you can influence that behavior under configuration (your app selected) than the "javescript Replay" tab.
    should this not resolve best to file an SR so we can take a look together with you.
    R, jurgen

  • How to set Dropdown list in tablen whith others Dropdown values in each row

    how to set Dropdown list in tablen whith others Dropdown values in each row of the table

    hi ,
    You have to add the parent element before adding data to the child node ...you follow the below steps it will work
    1) Take ContextStructure as follows ...
    tabledata (valuenode)
        ddownbyindex( value node) --within the tabledata node
             value (attribute)
    2)Binding to your layout
      tabledata (node) ---bind this to the dataSource property of your  table
          ddownbyindex( node)
                Value (attribute)--bind to the texts property of you DDbyIndex
    3)In wdinit() method add the following code
         IPrivate<Your view name>.ITabledataElement tabledataElement =wdContext.createTabledataElement();
        wdContext.nodeTabledata().addElement(tabledataElement);
        for(int i=0;i<5;i++)
         IPrivate<Your viewname>.IDdownbyindexElement ddbyindexElement=wdContext.createDdownbyindexElement();
             ddbyindexElement.setValue("Value"+i);
             wdContext.nodeDdownbyindex().addElement(ddbyindexElement);
    And set the cardinality property of the table node as 0..n
    and dropdownbyinex node to 1..n
    You try it ...
    Regards
    Madhavi
    Edited by: madhavi kotra on Sep 2, 2008 6:00 PM

  • SkyDrive photos & contact list not showing in FF13

    I have had FF for years & have been happy with it always until FF13 which has caused problems with my use of SkyDrive to share my photos. I have used SkyDrive for a long time too & never had issues until the recent FF13 update. I can use SKYDrive without any problems if I use IE as my browser but in FF13 some photos will not show in a slideshow unless you right-click & choose view original then a separate window opens for that one photo. It is random because if you start slideshow over it may be totally different photo(s) that will not show. Other thing that started since FF updated to 13 is that when I try to 'share' the slideshow my hotmail contacts list will no longer load although it will load if I switch to IE. This is clearly a problem related to FF13 since there is no problem in IE. I prefer to use FF but need it to work for SkyDrive. Please is there a patch for this or can you tell me what to do.

    This is way too technical for me. I have no idea what that is nor do I feel comfortable fiddling with things I don't know anything about.
    Thanks for your help but as I said in my last post I will use IE for sharing SkyDrive until the FF fix comes out.

  • Goods movement list not showing EAN in Order Unit..!

    Hi Guys,
                   I have an issue with goods movment list (tcode MB26).
    good movement list not showing EAN in Order Unit..!
    EAN No. and Storage Bin is maintained in Material Master but its not showing up Goods Movement list.
    Please find the screen shots.
    Thanks
    Sam

    are you still in 46c release? for 46c exists an OSS note to fix the issue with the bin:202240 - Transaction MB26: Storage bin is not supplied

  • Contact choice list not showing up on dial screen

    I have a large contact list in the address book and today the contact choice list not showing up on the dial screen when I press the first one or two letter of the contact name, for example, there are 2 contact in my address book, John Smith and John Joe, when I press "john", BB will filter the address list and show up 2 contacts above in the choice list, but it stop working today, any ideas? thank you.

    Never mind! If anyone else has this issue.... After trying numerous things , I simply turned iMessages off on ipad, restarted ipad and logged back in.

  • Transparent pop up list not showing?

    Transparent pop up list not showing ?

    This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
    Just check if your business role is properly configured. Thats all i can say.
    Regards
    Kavindra

  • Why did the trace NOT show the other switches in between?

    I have a PC that is connected to a switch (A) in a network. Switch A has many switches in between and connects to another switch B. When I did a trace to the server, the last switch I see in the result is switch B. Also, when I checked to which port of switch B that the server was connected, It showed as Po1. When I did a show cdp neighbor for the interfaces for the interfaces involved inthe bundle, I get a switch and then another. Why did the trace NOT show the other switches in between? Why did I get an arp on Switch B? Could some one explain?

    It's hard to tell, but if you have L2 switches, the addresses on those L2 switches are for management purposes only and you won't see a response from a trace. The only time you'll see a response is when the packet is routed between devices and not switched. You'll get an arp request/response across a single vlan. If you have vlan 10 across 10 switches, all 10 switches will see an arp request because they're broadcasted throughout the whole vlan.
    HTH,
    John
    *** Please rate all useful posts ***

  • FLVPlayback controls are not showing in other people computer on there browser...

    Hi,
    In my project I have to play a flv vedio in swf file so in place a FLVPlayback component in one movieclip and when I hv to show I make that movie clip visible and play the vedio from starting.
    Its working fine on my computer but FLVPlayback controls (play pause button, seek bar volume controls) are not showing in other people computer on there browser...

    Then set "base" attribute to "swf" or "./swf" (relative path - can't remember which ), or absolute path to the "swf" directory.
    Kenneth Kawamoto
    http://www.materiaprima.co.uk/

  • Why does emoticons sent from my iphone 4s does not show on other phones

    why does emoticon sent from my phone does not show on other phones

    iOS emoticons are Unicode characters that need a certain set of glyphs to be able to be displayed—think of it as a missing font not displaying correctly. If the device you send them to doesn't have the "font", it can't show it.
    That's just the way it is.

  • Audiobook does not show on other computer and IOS devices.

    Audiobook purchased on iMac does not show on other computer and IOS devices. Music i buy in the store does show up. settings have been checked and books

    This has nothing to do with iCloud.  Try one of the iTunes forums:  https://discussions.apple.com/community/itunes

  • Report Viewer Dynamic Parameter List not showing a complete list of values

    Hi, I have installed the crystal report runtime 13.0.1.220 for framework 4.0 in a 64-bit windows 7 professional server.
    I have an aplication that opens crystal reports using the crystal report viewer control for visual studio 2010, also version 13.0.1.220.
    ISSUE: The report opens fine, but it does not shows all the available values in the dynamic parameter list.
    I have tried setting the MaxRowsetRecords registry key to diferent values but it does not work.
    I do not have any crystal report stand alone version installed in my server.
    Please help me?

    Hi Ludek,
    yes i followed the instructions of the KBase you are mentioning, but it isn't working for me.
    I modified the following keys:
    HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
    and
    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
    1) I had to create the LOV key under the DatabaseOptions in both keys.
    2) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
    3) I restarted my server. Still not working.
    4) Then after that i modified the following registry keys: (leaving the first 2 keys modified)
    HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports\DatabaseOptions\LOV
    and
    HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\DatabaseOptions\LOV
    5) Also had to create the LOV key under the DatabaseOptions in both keys.
    6) Inside the LOV keys I created the new string value MaxRowsetRecords and set the value to different values. (Ex: 5000, 10000 and 1000000)
    7) Restarted my server. still not working
    8)  Then after that i modified the following registry key: (leaving the first 4 keys modified)
    HKEY_CURRENT_USER\Software\SAP BusinessObjects\Crystal Reports for .NET Framework4.0\Crystal Reports Designer Component\ReportView
    Inside this key I created the DWORD PromptingLOVBatchSize and gave it a decimal value of 1000000
    9) Restarted the server. Still not working. For crying out LOUD!!

  • Plz. help,table does not show value for one field

    hi all,
    i have a really strange problem , i have a string field in access database that contains the date and time value,this field for some strange reason does not show in my table created through html,
    i tried all combination(arranging the fields) ,renaming it w/o help, it shows the value using out.println(but then why is it not showing me in the table???)
    plz. help ASAP.
    the code is as under
    <HTML>
    <HEAD><TITLE> LOGGED IN ok</TITLE> </HEAD>
    <BODY bgcolor = "yellow">
    <%@ page import = "java.sql.*" %>
         <%! // declaring variables
    String s = "";
    java.sql.ResultSet rs=null,rs1=null,rs2=null;
    java.sql.Connection con;
    java.sql.Statement stmt,stmt1;
    String empId = "",compid ="",calltype ="",probheader="",probdescription ="",probcomment ="",priority ="",a="";
    %>
    Following are the pending complaints ..
         <TABLE BORDER=1 CELLSPACING=0 CELLPADDING=0 width="100%">
         <TR>
         <TD> ComplainD </TD>
    <TD> ComplainId </TD>     
    <TD> ProbHeader </TD>     
    <!--
    <TD> ProblemDescription </TD>     
    <TD> Problem Comments </TD>     
    -->
    </TR>
         <%
         try
         Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
         java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};" +"DBQ=c:/vishal/HelpDesk.mdb;DriverID=22;READONLY=false","","");
         //java.sql.Connection con = java.sql.DriverManager.getConnection("jdbc:odbc:Portal");
              java.sql.Statement stmt = con.createStatement(java.sql.ResultSet.TYPE_SCROLL_INSENSITIVE,java.sql.ResultSet.CONCUR_READ_ONLY);
              s = "select * from Complains";
         java.sql.ResultSet rs = stmt.executeQuery(s);               
                        while(rs.next())
                        //getting data from database
                                                           empId = rs.getString("EmpId");                    // out.print(" " + empId);
              compid = rs.getString("ComplainId");
              // out.print(" " + compid);
              calltype = rs.getString("CallType");
              // out.print(" " + calltype);
                        a = rs.getString("Complaindate"); //problem with this field
    out.print(a); // prints value
              %>               
                        <TR>      
                        <TD> <%=compid %> </TD>
                        <TD> <%=calltype %> </TD>     
                        <TD <%=a %> </TD>
                                       </TR>
    <%
                        }//while loop          
         %>
         </TABLE>     
         <%                
         }//try
              catch(Exception ep)
              out.println(ep);
              System.exit(1);
    %>
    </BODY>
    </HTML>
    value in database is as follows :-
    Complaindate
    5/18/2003 1:30:27 PM
    5/18/2003 7:32:43 PM
    5/18/2003 7:34:02 PM
    5/18/2003 7:49:19 PM
    5/18/2003 7:50:27 PM
    5/18/2003 10:49:42 PM
    5/18/2003 10:58:24 PM
    thanking u ,plz ask if any further clarifications

    Hi
    I am seeing nothing wrong with ur code..
    what about "view source" result.....plz check with that...
    whether u r getting all the trs and tds...
    revert back on this Issue..
    Mars Amutha

  • HELP (Apple TV not showing up in Devices list)

    Has anyone resolved this issues. Like many others, i have things set up perfectly. My itunes stream, but when I go back to sync photos,etc. there is no Apple TV in the "Devices" list (as there is no devices list).
    HEEEEEEELP

    AppleTV does not show up in my Devices list unless there is a code on the screen of the AppleTV. It's not the way I understand it's supposed to work, and apparently not the way everyone's works, but it's a reasonable workaround for me. I think this is a bug in the software that's interacting with something else on my network or a QC problem with some hardware component, because it doesn't happen to every AppleTV.

  • IBase search result list not showing in Account Identification

    Hi Gurus,
    I'm new to CRM and we have an upgrade issue. We just migrated to EHP3 for SAP CRM 7.0. After the migration, the installed Base result list is not showing in the Account Identification screen. We have the requirement to show the installed base on the right side of the confirmed account and also the result list in case the customer have multiple equipments. The first part is working correct and it shows the data if there is only one equipment with the customer. But in cases where there are more than 1, the installed base view shows blank and also the result list does not show. Instead the Interaction History is displayed. I have checked all the forums and the config and it all looks correct. Here is the list of config that we have
    1) I have the Account Identification Profile created and assigned the Object Component 'ICCMP_IBASE'  to it with Auto Search checked ON. This I believe is for the IBase Details which is working fine for single equipments.
    2) Function Profile 'BPIDENT' with value of the Account Identification Profile has been assigned to the Business Profile.
    3) The Installed Base Profile 'DEFAULT_TREE' has been updated to UNCHECK 'Display Tree' as we want the result list.
    4) Function Profile 'IBASE' with value 'DEFAULT_TREE' has been assigned to the Business Profile.
    Am I missing something? The exact same config works perfectly in a box that has not yet been upgraded. Any help would be appreciated...

    Hi,
    I tested this issue and I can reproduce it in my environment. However, as far as I know, this behavior won't affect the usage of the address book.
    I searched the internal resource but I cannot find a bug report regarding this issue. If you have any suggestion about this issue, you can submit a feedback via:
    http://office.microsoft.com/en-US/suggestions.aspx
    Best Regards, 
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

Maybe you are looking for

  • Extracting data from a Structure in R/3.

    Hi, This is in continuation to one of my previous questions. I found that for a standard report  "S_ALR_87012347"  for FI GL in R/3, the values are taken from a structure "FAGL_S_RFBPET00_LIST2". I have used 0FIGL_O02 DSO and 0FI_GL_3 Datasource. The

  • How do I close tooltip windows on my iPad that I tap to open but lack a close widget?

    Many game-related websites I browse will show images that, were I on a desktop or laptop, I can hover my mouse over to get a tooltip window to appear.  That window will disappear when I move the mouse off of the image, so the window doesn't have a cl

  • WBS settlement to CO-PA

    Dear Experts, We have PS in place and current process for prototype is that we assign WBS to PP order and PP order is real cost object and PP order is settled. We have sales order also with WBS element (same as PP order) and we want to settle this WB

  • Is possible to Integrate SAP BCM with Third party?

    Hello Everyone, Some of you can tell me if Is possible to integrate SAP BCM with another solution IBM ITSM? The integration would also have the screen pop up the same or similar to SAP CRM. Thanks in advance. Best regards Rodrigo Lucas

  • BAPI_MDPROVIDER_GET_MEMBERS   OPTIONAL_PROPERTIES

    in the Function Call BAPI_MDPROVIDER_GET_MEMBERS (executing this remotely in java via sapjco) there are table params for OPTIONAL_PROPERTIES and SELECTED_PROPERTIES.  i'm assuming these are useful for deriving member properties that are not normally