Value help.. in version 7.0?

Hello all,
I have VC 7.0 installed in the system. We have an option to provide the value help, for a particular field.
In the wizard, when we select the data service(i.e, RFC), it says not aple.plicab
Later, we get a value help button, but no value appears,even tho it enters the RFC.
Can someone tell me on the kind of RFC, for a value help fieldi.e, kind of import and export details for the RFC.
Regards,
Sharath

Hai,
if your providing value help for particular field u have select key and value field . then only the data will pouplate in the value help.
Regards ,
Venkat

Similar Messages

Hide Toolbar and Value help drop downlist

Hi,
I created a IF with a Value help drop down list. I also make use of the Hide Toolbar options. The drop down list has an input like:
key - text (eg. 0001 - Holiday)
The pdfMode is "UpdateDataInPdf".
When i run my wd everything works fine. What i want to do is this: when the user push the button "next" i want to show the IF in a read-only mode. What i did, is that when the user push to button i change the PdfMode from "UpdateDateInPdf" to "GeneratePdf" (also tried "UsePdf") and change the "enabled" property to false.
What happens is, the Adobe toolbar is back and the value help dorp downlist shows the key instead of the text.
If i don't change the "enabled" property it works well, but than it's still possible to change data in the form.
I am using NW04 SP16.
Hope somebody can helps me.
Kind regards,
Maarten Duits

Hi Maarten
in general, right now there is no standard (i.e. non-hack) way to make a physical interactive PDF form read-only.
The only sure way this would work in your process is to send the data back to the backend and have a second (practically identical) template ready in the background to generate a read-only version of what the user saw previously.
Best regards,
Markus Meisl
SAP NetWeaver Product Management

Error in Flex at the time of Value Help

Dear All,
While I am creating Value Help then this error shows if deployed.
"Error in compiling swf for Flex 2 application. Consult log file for details."
What should I do?
Regards,
Santanu

Hi Santanu,
Which version of Visual Composer are you using?
From the description of the problem it sounds like 7.0 (04s) version and not CE (7.1 and above).
If that is the case, you should try to ask about this in the [VC 7.0|SAP NetWeaver Visual Composer; forum.
Best regards,
Tal.

Problems with F4 Value Help in NW2004s Portal

Hello,
we are having some troubles with the F4 ValueHelp Extension from the Advanced BSP Programming book (and the blogs of course).
We've implemented the solution on a 4.7 backend and portal 6.0. No problems there, everything was working fine.
We now moved to erp2005 (WebAS 700) and NW2004s Portal (7.0).
The popup shows and I can select entries from the list. But when clicking the ok icon a javascript error is thrown stating that 'parent.document.getElementById(...)' is null or no object.
I think the problem is, that by making a call to 'parent' we are searching in the portal frame and not the BSP. There (in the portal frame) the element is not known so the error is thrown.
I allready changed from the dialog_ie6.js provided on the BookCD to the one delivered by SAP. Did nothing regarding the error.
I also tried changing ZCL_BSP_M_INPUT_HELP->BUILD_ACCEPT_SELECTION_SCRIPT. I changed all the "parent.document.get..." "to document.get...". The error message was still the same, 'parent.document.getElementById(...)' is null or no object.
So now I'm kind of stuck. If I try the example outside the portal everything works as expected. So this clearly seems to be a problem with the portal integration. All involved BSP-Apps are marked as "supports portal integration".
Any ideas on this topic?
Thanks and kind regards,
Alexander Sperling

I have a working solution to the problem. It isn't the nicest solution because it will probably require some modifications to the application that hosts the value help, but we will get to that in a second.
I tried many different ways to come up with a solution that would still work via JavaScript. The portal is now loading the popup javascript in the master frame. It registers event handlers so that if any application triggers a popup internally it "hi-jacks" the event. So regardless of what I change in the BSP javascript library, it gets overriden by the portal one. The portal also now even enforeces its theme on the inner page in the popup. Truly the portal takes complete control over the inner html of the popup.
To make things worse the popop has not path to reach the source that triggered it. The source objects are tracked in the javascript, but because the master frame takes over; the popup window only has access and visibility to the master frame and the navigation frame. In essence in the DOM it is now higher in the stack than the object that actually triggered it.
Web Dynpro gets around this because it doesn't use any client side mechanisms to communicate it results back to the source frame. Web Dynpro has the luxury of always being stateful and therefore can make certain assumptions that would never work in BSP. The hi-jacking is an excellent solution for Web Dynpro. The portal can then override the functionality of Web Dynpro - providing the new functionality of floating the dialog box over the entire portal - without having to make any changes to the Web Dynpro Framework. However they never had our little BSP solution in bind obviously.
It might be possible to completely rewrite the popup_ie.js and popup_ns.js to use all different event, method and variable names. This separate version could then provide complete separation from the portal script. However this is just a theory. I'm afraid that I wouldn't have the bandwidth to rewrite the entire script right now so I focused on a quicker solution.
The only approach that I could come up was to follow the Web Dynpro approach and return to the server with the value. To do that I used Portal Eventing. Portal Eventing allows us to pass a value to the source frame regaurdless of our relative positions in the DOM.
In my inner BSP application for the value help (ZES_VALUEHELP), I made the following change in the model method BUILD_ACCEPT_SEL_SCRIPT_V2. At line 141 I changed the logic. Instead of using JavaScript to write the selected value back into the source element, we will just trigger a Portal Event:
****With an InputField we write the contents directly back into the element
      ELSE.
        CONCATENATE me->js_close1
        `portalFireEvent('com.sap','`
        me->element_id
        `',"`
        key
        `");`
         INTO me->js_close1.
        EXIT.
The other change is within the Element handler class for inputHelpV2 - ZCL_ES_BSP_ELMNT_INPUT_HELP_V2. We need to register the listener for the Portal Event. Therefore in DO_AT_BEGINNING we will add the follwing at line 23 (right after we place the Element Id into the URL Parameters Table.
data: portal_event type ref to cl_portal_event.
portal_event = cl_portal_event=>factory(
    name = <wa_params>-value
    namespace = 'com.sap' ).
while m_page_context->element_process( element = portal_event ) = co_element_continue.
endwhile. "End portalEvent Render
Overally using the portal eventing actually is an intersting approach. There is only one drawback, now we have a server side event. That being the case, our application now needs some event logic to process this event and populate the value. Depending upon if you are using MVC, Data Binding, or Flow Logic this could vary - and would have to handled by each application. The nice thing about the old approach was that it all happened via JavaScript on the Frontend and didn't require the application programmer to do anything - that was obviously its weakness as well.

Display values in different versions for 3 specific years

Hi
I want to show in a dynamic report and in a dynamic input schedule values for different versions ACT and PLAN via Excel client.
In the rows are entity, time (for 2009, 2010, 2011) and version. And in the columns are special time dimension to show month. Sounds very strange - and it is so... Now I want to show only values for ACT for year 2010 and PLAN for 2011.
How can I enter the dimension within the expansion area? Is there a way to combine 2 different dimensions like a statement "where time is 2010 and version is ACT"?
Thank you very much for your ideas

Hi Nilanjan
Thank you for your post.
I'll give EVTIME a try. But it will not solve my problem I guess. EVTIM is helpful for columns to use offset I do understand. Can I use it within expansion area of EVDRE function?
The display behavior has to be dynamaic. Cause there is in the first expansion dimension entity with a hierarchy. 2.nd expansion is year and 3.rd is version. And I only want to see ACT row for 2009, FC row for 2010 and PLAN row for 2011. Next 3 rows must be the next item of dimension entity and so on...
Currently I see 2009 ACT, 2010 ACT and 2011 ACT same like 3 HR and 3 PLAN rows.
Any ideas?

Freely-programmed value help for a single ALV cell

Greetings everyone,
I have a freely-programmed value help that works beautifully when attached to the context element of a single field, but now I'm needing to use it in an ALV for a specific cell. Is there a way to shut off the dropdown for all of the rows (cells) in the column where I don't need it? Or, is there an appropriate workaround that can deliver the same results?
I've found several posts that address similar issues, but nothing for this exact problem.
Thanks,
Jason Block

I take it from reading your description what you want is a little more complicated than just controlling the read-only property on the input field. If I read you properly you still want to have all the cells in a column to be open for input, just on some of them you want to disable the value help. Is that correct? See these screen shots for clarification:
If you focus on the the input field in the first row, you get the value help:
http://www.flickr.com/photos/tjung/2714133068/
However if you go to the second row and focus on the same input field in this column, you don't get the value help:
http://www.flickr.com/photos/tjung/2714133094/
If this is what you want, then buckel up because this was a challenging one. The problem is that the value help specification is not done at the UI element level, but instead at the context attribute level. Therefore it can't be as simple as controlling a property on the inputField itself. What you will need to do is extend the context node that you have bound to the ALV. You need to add a second version of the attribute that is bound to your input field. In this second version you can set the value help specification to Disabled:
http://www.flickr.com/photos/tjung/2713320505
Notice from the screen shot that I also added another attirbute called CVAR (type STRING). We will need that later. It will be used to store which cell variant show be used on a particular row.
Now we must go to the place in your code where you fill the context node with data. You will need to copy the data from your primary attribute to your secondary one. In my case I was copying the values from CARRID to CARRID2. Of course for update, you would need to merge the data back together before saving it back to the database. I also set a simple odd/even pattern of controller in the cell variant. I assume you will have some actual business logic that controls this:
data odd type boolean value abap_true.
   loop at lt_f_r_sflight[] assigning <ls_f_r_sflight>.
    clear ls_c_r_sflight.
    move-corresponding <ls_f_r_sflight> to ls_c_r_sflight.
    move <ls_f_r_sflight>-carrid to ls_c_r_sflight-carrid2.
    if odd = abap_true.
      odd = abap_false.
    else.
      odd = abap_true.
      ls_c_r_sflight-cvar = 'NOVH'.
    endif.
    insert ls_c_r_sflight into table lt_c_r_sflight[].
endloop.
lo_r_sflight->bind_table( lt_c_r_sflight[] ).
Next is the logic in the initialization of the ALV. We will need to create two input fields - each bound to the different context attributes. We will make the one the primary cell editor. The other will become the cell editor of the cell variant. We then tell the column where it can get its cell variant value from:
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
DATA l_salv_wd_table TYPE REF TO iwci_salv_wd_table.
l_salv_wd_table = wd_this->wd_cpifc_alv( ).
DATA l_table TYPE REF TO cl_salv_wd_config_table.
l_table = l_salv_wd_table->get_model( ).
l_table->if_salv_wd_table_settings~set_read_only( abap_false ).
DATA input1 TYPE REF TO cl_salv_wd_uie_input_field.
DATA l_column TYPE REF TO cl_salv_wd_column.
l_column = l_table->if_salv_wd_column_settings~get_column( 'CARRID' ).
CREATE OBJECT input1
    EXPORTING
      value_fieldname = 'CARRID'.
l_column->set_cell_editor( input1 ).
DATA input2 TYPE REF TO cl_salv_wd_uie_input_field.
CREATE OBJECT input2
    EXPORTING
      value_fieldname = 'CARRID2'.
DATA l_cv TYPE REF TO cl_salv_wd_cv_standard.
CREATE OBJECT l_cv.
l_cv->set_key( 'NOVH' ).
l_cv->set_editor( input2 ).
l_column->add_cell_variant( l_cv ).
l_column->set_sel_cell_variant_fieldname( 'CVAR' ).

Range or Value Help in VC 7.2

Hello Guys,
I'm using VC 7.2 SPS 02, and also I am not able to use a range filter. In previous versions there was the option of Value Help. No more?
If anyone can help, thank you!
Thanks!
Milton

Hai,
if your providing value help for particular field u have select key and value field . then only the data will pouplate in the value help.
Regards ,
Venkat

ABAP Webdynpro cannot display value help, combo box properly in IE ?

Hi WDA expert,
I have problem developing webdynpro in NW 7.0 EHP1 SPS02. All the combo box, value help, drop down input did not properly display using IE 7.0 / 8.0. It is something like create another blank input beside the original object.
but everything ok if i am using mozilla firefox.
I am not sure what is the problem with this.
Please help.
Thank You and Best Regards
Fernand.

Hi Thomas,
Thank you for your response, But i am still not able to solve the problem. Let me give you more detail information regarding this issue.
are you using the Portal? The other poster in this thread seems to think so, but I don't see anything in your postings to indicate that. IE7 is supported on your release/SP level. IE8 is not supported until SPS5.
=> I am not using portal it is just normal test from SAP GUI. I am using IE 8.0.6001.18702. So far i have tested the sample webdynpro "WDR_TEST_SELECT_OPTIONS" to 4 different server (PID, PIQ, ECD, ECQ) all using the same version NW 7.0 EHP 1 SPS02. (i have check for ABAP and BASIS package). The problem only occur in PID (Initially the icm service is not start so i use transaction SICF to start the webdynpro service) not sure if there is missing java script library ?
Please refer in this link for the different result screen capture below:
http://i802.photobucket.com/albums/yy310/pisuper/WDA_DEV.jpg --> error in PID
http://i802.photobucket.com/albums/yy310/pisuper/WDA_QA.jpg -
> success in PIQ, ECD, ECQ
I would recommend clearing your browser cache and the server side cache. For the server side cache go to transaction SMICM and choose Administration->ICM->Exit Hard->Global.
I have restarted the whole server and i did again from SMICM. But still having the same problem like in the screen capture.
Are you using a standard or customized theme?
I am using standard theme base on demo "WDR_TEST_SELECT_OPTIONS"
Base on my latest investigation seems like those 3 success server PIQ, ECD and ECQ always download this file ls_ie6.nosprite.css in the internet temporary directory, but then no for PID.
is that any idea or suggestion that i can try to solve this problem. it seems like some configuration was missing for the standard theme in PID
Thank You and Best Regards
Fernand Lesmana
Edited by: Fernand Lesmana on Jun 16, 2010 3:52 PM

Add Value Help doesnu00B4t work - Visual Composer

Hello
I am trying to use "Add Value Help" in a variable form, but when I execute "Deploy" appears the following error:
Error in compiling swf for Flex 2 application. Consult log file for details
For details i have entered in System Management \ Monitoring \ Logs and Traces - Predefined View - Default Trace:
The last message error contains a large text:
java.util.zip.ZipException: reading zip file central directory failed
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:123)
at java.util.zip.ZipFile.<init>(ZipFile.java:144)
at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchiveInfo(AbstractLog.java:328)
at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchives(AbstractLog.java:454)
at com.sapmarkets.bam.jmxadapter.AbstractLog.getArchives(AbstractLog.java:477)
at sun.reflect.GeneratedMethodAccessor506.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.getAttribute(DefaultMBeanInvoker.java:129)
at javax.management.StandardMBean.getAttribute(StandardMBean.java:229)
at com.sap.pj.jmx.server.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1296)
at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getAttribute(MBeanServerWrapperInterceptor.java:181)
at com.sap.engine.services.jmx.CompletionInterceptor.getAttribute(CompletionInterceptor.java:309)
at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.getAttribute(BasicMBeanServerInterceptor.java:169)
at com.sap.jmx.provider.ProviderInterceptor.getAttribute(ProviderInterceptor.java:195)
at com.sap.engine.services.jmx.RedirectInterceptor.getAttribute(RedirectInterceptor.java:232)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.getAttribute(MBeanServerSecurityWrapper.java:234)
at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:522)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.getLogInfo(LogControllerFacade.java:227)
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.getLogInfosWithPattern(LogControllerFacade.java:193)
at com.sapmarkets.bam.logcontroller.jmx.LogControllerFacade.getLogInfos(LogControllerFacade.java:174)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.getAttribute(DefaultMBeanInvoker.java:129)
at javax.management.StandardMBean.getAttribute(StandardMBean.java:229)
at com.sap.pj.jmx.server.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1296)
at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.getAttribute(MBeanServerWrapperInterceptor.java:181)
at com.sap.engine.services.jmx.CompletionInterceptor.getAttribute(CompletionInterceptor.java:309)
at com.sap.pj.jmx.server.interceptor.BasicMBeanServerInterceptor.getAttribute(BasicMBeanServerInterceptor.java:169)
at com.sap.jmx.provider.ProviderInterceptor.getAttribute(ProviderInterceptor.java:195)
at com.sap.engine.services.jmx.RedirectInterceptor.getAttribute(RedirectInterceptor.java:232)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.getAttribute(MBeanServerSecurityWrapper.java:234)
at com.sap.engine.services.jmx.ClusterInterceptor.getAttribute(ClusterInterceptor.java:522)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.getAttribute(MBeanServerInterceptorChain.java:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.tc.logviewer.mbean.LocalLVMBeanServer.invoke(LocalLVMBeanServer.java:73)
at $Proxy173.getAttribute(Unknown Source)at com.sapmarkets.bam.application.logdepot.AbstractLogDepot.getAttribute(AbstractLogDepot.java:236).........
Does anyone know what is the cause of this error?
GML Version: 701.7.0027
Client Version: 701.7.0.1
VCserver Version: 701.7.0.1
Flex Version: 701.7.0.1
Portal Content version: 701.7.0.1
Portal connector version: 701.7.0.1
Edited by: Nuno Alves on Dec 15, 2010 3:28 PM

Hi ,
Thanks for you reply, i am trying to provide it to normal input field not to any combo box etc.
Yes in my system, it is not available for any input field. But the documents which i read, their they show the "Add Value Help" option.
I would request you to reply on my question frequently, the reason being i have to submit this functionality to business very soon. I hope you understand. Thanks!

Custom Error Message in Value Help

Hi,
In my application i have a Inputfield called "CLASS", for which i have added a value help..it has these values
B    Business
E    Economy
F    First Class
When the user enters a value(say "X") other than B, E, and F, it displays a message
<b>String "X" does not match the enumeration</b>
I want to put my own message like " Please enter a valid value" instead of the above message.
Please let me know how to do this ?
Thanks
Senthil

Senthil,
First, "looping through the list and checking the user entered value with values in the list" is possible only with non-validating actions. Using non-validating actions is a tricky task in real life.
Second, workarounds are possible, but they involves calculated attributes (like here: /people/valery.silaev/blog/2005/11/29/800format-your-way). Solving this problem generically (45 attributes is a good number to start with a generic solution) will result in solution with complexity comparable to this: https://weblogs.sdn.sap.com/pub/wlg/3309. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] Do you need such thing just to alter error message?
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com

How do you use user defined error messages in Value Help?

Hi,
I'm currently working on a Modifiable Value Help Selector in Web Dynpro Java, and I want to use a user defined error message when I validate the values entered by a user. Currently, it's returning its default error message ("Character <string> does not match...").
Since the project requires a different error message, is there a way to override the default error message and use my defined error message instead?
Thanks!

Hi Angelo,
I am not sure why message area is showing both Custom and inbuilt messages but you can try the following:
i guess you must be using reportContextAttribute exception for showing Error messages on the input fields as well.in that case you can disable the message area so messages will appear only on the Context level ie; on input fields.
For other messages apart from validation messages you can enable the message area before reporting the exception.
make sure the boolean context variable which will be used for enabling and disabling the message area should have Readonly property set as true.
I am not sure whether this is the only solution for this but you can try and see if it works.
Siddharth

How to link Value Helps in Visual Composer?

I would like to know, how to link value helps in VC...??? It's like.....after selecting a value from Value Help 1, how do i restrict my Value Help 2 values so that it contains the values that are relevant to the value selected from Value Help 1 only....???? Request you to please provide the solution.......

Hi Christophe
Thanks so much for your help. I have been trying to do the way that you have suggested but am unsuccessfull...... Can you please tell me as to where should I create a field in the second popup view...??? After I double click on the link between "Start" and the "BAPI" in the second popup view...... , I find no "+" symbol in the "Configure Element Panel" using which I can add the value taken from the first popup view.....
Is there any pdf file or documentation that shows as to how to do this process...????
Waiting for your response..... Thanks for your suggestion.....
Regards
Deepak Jaju

Selection Screen - Text instead of Key in the value help

Hi ,
I have implemented selection options for Web dynpro.
The value help for the selection fields displays the key of the selected value (standard).
I would like to know if there is an option to display the text (instead of the key) in the field.
Key Text
01    AAAA
02    BBBB
03   CCCC
So if I select say - 01 and 03 in the value help, Can I display AAA, CCCC in the field (or next to the field)
Thanks,
Sri
Edited by: Sri on Sep 29, 2010 8:19 AM

HI,
You can dispaly it as dropdown and it shown the text:Use the beloe code refernce;
DATA lt_valueset TYPE wdy_key_value_table.
DATA ls_valueset LIKE LINE OF lt_valueset.
ls_valueset-key = '1234'.
ls_valueset-value = '1234test'.
APPEND ls_valueset TO lt_valueset.
ls_valueset-key = '1235'.
ls_valueset-value = '1235test'.
APPEND ls_valueset TO lt_valueset.
ls_valueset-key = '1264'.
ls_valueset-value = '1236test'.
APPEND ls_valueset TO lt_valueset.
CALL METHOD wd_this->lo_select->add_selection_field
    EXPORTING
      i_id = 'CAND_ID'
it_result                    = lt_range_table
      i_as_dropdown                = abap_true
      it_value_set                 = lt_valueset
*      i_read_only                  = ABAP_FALSE
*      i_dont_care_value            =
*      i_explanation                =
*      i_tooltip                    =
Regards,
madhu

Date format is not working properly for Calender value help

Hi Experts,
We have two problems.
1. We want to change the format of date displayed. We want format of dd-MMM-yy. For that we have created one Simple
Type Dictionary Object with Displaying format dd-MMM-yy. It is working
fine for the non editable UI. But once I apply the dictionary type
object as data type for an input field, probem happens. Once the user
choose a date from calender value help the value in the input field is
coming like 01-011-12 not like 01-Jan-12.
The date format is not changing from the calender. But if we set the
display format of the dictionary object to MM-dd-yy or MM/dd/yy or
dd/MM/yy or dd-MM-yy the format conversion from calender to input field
is happening properly.
The only problem once we put MMM in place of MM for the input field
where user is selecting from a calender value help.
2. We want to restrict users from entering the value manually for date input field. The user
should be able only to enter value by selecting from calender value
help.
Please give suitable solution for these problems
Thanks
Shankha

Hi Sankha,
Please refer the links below:
http://scn.sap.com/thread/1659463
http://scn.sap.com/thread/1533443
Regards,
Manoj

Some fields from R/3 have automatic value help for input field on WD

Hello,
we have imported a Model from RFC/JCo (ABAP) with several fields. One of them is "IWAER" of SimpleType Iwaer and "Built-In-Type" string in J2EE. Though the enumeration of this type is empty, WebDynpro mystically generates a value help if the type is assignet to an ImputField. On the ABAP-side component type is IWAER with data type CUKY and in domain WAERS which has a value table TCURC (instead of fixed values in a value range).
Where/why does WD find out that this is a currency-field and where do the values in the value selector come from?
Best regards,
Manuel

Hi,
at least for the ModelData-Connection (BAPI-Call) there is no data being transferred besides one value for each field.
I don't know if the MetaData-Connection of JCo is able to get more information (e.g. key-value-pairs for the domain or type the field belongs to,..) than just the structure of the interface.
-> Where and how do these EVS-values come from without doing something?
Best regards,
Manuel

Value help.. in version 7.0?

Similar Messages

Maybe you are looking for