Value mapping does not work

Hi All,
I can not get value mapping in XI 3.0 to work. Has anyone experience with this, the documentation is soo bad. This is what I have done:
In the Graphical mapper I used the object "Value mapping" and filled in the following parameters:
Value mapping context: http://sap.com/xi/XI
Source
Agency: System1
Schema: UnitSystem1
Target
Agency: System2
Schema: UnitSystem2
In the directory I created an Value mapping table with the same paremeters as above and filled in the table.
When I test the complete flow, the value mapping is not used. The unchanged values are just copied over to the target field.
Any help is appreciated.
Cheers,
Frank

Hi Colin,
In test Mode you can't test the value mapping, because the value mapping table is part of the Directory. Instead of the Value Mapping I tried "Fixed Values" and that works, but you can not re-used it.
If this advanced mapping guide explanes how to use the value mapping better then the standard "how to" mapping guide, please send it to me.
email: [email protected]
Cheers,
Frank

Similar Messages

Planning system value mapping does not work (planingsys)

Hello,
When sending a Material from R3 to SBO one of the materials fails with this error:
DI Error -1004 : (-1004) '' is not a valid value for field 'PlaningSys'. The valid values are: 'M' - 'MRP', 'N' - 'None' =| (End of appended Exceptions)
I immediatly set a value mapping for Planning System ( '' -> 'N' ) but the same error still occurs (i also tried with '' -> 'M' ).
Can anybody help ?
Thanks,
Fabrice.

I finally found a solution
The value mapping that needs to be done was:
'PD' -> 'bop_MRP'
the value '' in the error is wrong: the value was 'PD' and the mapping has to be done with the SBO SDK variable name.
Bye.
Message was edited by:
Fabrice NANNI

Map does not work on my iPad air 32?

I downloaded flightradar24 app and the maps do not show in any detail and satellite is not working at all. Despite multiple downloads it still won't work.
I now see my apple Maps app that came loaded with my new iPad Air 32 does not work. My friend with iPad 3 sitting next to me has full functionality of maps on the same wifi. Thanks.

I downloaded flightradar24 app and the maps do not show in any detail and satellite is not working at all. Despite multiple downloads it still won't work.
I now see my apple Maps app that came loaded with my new iPad Air 32 does not work. My friend with iPad 3 sitting next to me has full functionality of maps on the same wifi. Thanks.

Export Parameters in Parameterized Message Mapping does not work.

Hello, XI-Gurus!
I have a question: how to use an EXPORT parameter in Parameterized Message Mapping? seems it does not work...
(I use XI / PI 7.1)
For example, I have a follow scenario: a large message comes to XI from one BS (message contains a lot of rows), then this large message splits to some small messages (something about 1000 rows in one small message), and send small messaeg one by one from XI to second BS. So, after receive step I use a transformation step with Parameterized Message Mapping to get a total amount of rows in large message (it needs for making condition for loop in IP, for example). I want to use an EXPORT parameter to pass this number from Parameterized Message Mapping to Integration Process. How can I do it?
Of course, I know the way to how to make this scenario without any parameterizing, but I want to use exactly "Parameterized Message Mapping" like it writes in this help:
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/c3e1fa6c31599ee10000000a1553f6/frameset.htm
This topic contains something about procedure how to use an EXPORT parameter, but this procedure does not work. I don't understand how to write this UserDefined Function, which I can set any export parameters.
I read this blog:
/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
this blog has NO solutions about EXPORT parameters. about IMPORT parameters - everything OK.
Some topics about how to use export parameters in MM in this forum marked as "answered", but this is not true.
How to export parameters from Message Mapping
Export parameter REALLY work in message mapping???????
Export parameter in Message mapping UDF
WBR,
Vsevolod

Hi Rudolf,
It still does not works.
Great thanks for all your answers! If your advice works on your PI-server, it means that my problem not in UDF.
Step by step:
1) I create in "Signature" tab two parameters: FILE_NAME, FILE_TYPE (of course, they both Export and xsd:string type)
2) Then, I goes to "Functions" tab and create new function "testUDF" with one argument var1.
3) In body of this UDF insert 2 strings:
getOutputParameters.setString("FILE_NAME" , "Order");
getOutputParameters.setString("FILE_TYPE" , "PDF");
4) in "Definition" tab I bind function "Local.testUDF" with one field in my input message and goes to "Test" tab for testing.
5) And then I have a message window "Problems While Testing":
Source text of object Message Mapping: mm_ParamMap | urn:****.*.:****:TEST has syntax errors:
Function testUDF, Line 1:
cannot find symbol
symbol : variable getOutputParameters
location: class com.sap.xi.tf._mm_ParamMap_
getOutputParameters.setString("FILE_NAME" , "Order");
^
Function testUDF, Line 2:
cannot find symbol
symbol : variable getOutputParameters
location: class com.sap.xi.tf._mm_ParamMap_
getOutputParameters.setString("FILE_TYPE" , "PDF");
^
Note: /usr/sap/PID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb1562570ca9e11deb3fe00237d301cd6/source/com/sap/xi/tf/_mm_ParamMap_.java uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details. Note: /usr/sap/PID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapb1562570ca9e11deb3fe00237d301cd6/source/com/sap/xi/tf/_mm_ParamMap_.java uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
2 errors
Look at this notes, first writes that I use a deprecated API, second - about unchecked or unsafe operations.
And I have no idea what's wrong... Can you help me?
Thanks!
WBR,
Vsevolod

NFSv4 UID mapping does not work

Hello,
i tried several hours to get nfsv4 uid mapping, but it does not work.
#/data 192.168.20.0/24(rw,sync)
/data 192.168.20.0/24(rw,fsid=0,insecure,no_subtree_check,async)
/data/home 192.168.20.0/24(rw,nohide,insecure,no_subtree_check,async)
/etc/conf.d/nfs-*.conf files are not modified.
/etc/idmapd.conf does not exists anymore (was removed in the last nfs-utils package update)
rpcbind is running on both computers.
My mount command:
/bin/mount -n 192.168.20.70:/data/home /mnt/demeter -t nfs4 -v
When i access the folder from the server as the specific user, it works. But not from the client (same username, but other UID). When i list the upper level directory of the server from the client side, i see as username only the number (of course, because the UID does not exists on the client). I can only access folders, where the client's useID have permissions on the server (for example, when i try to access the server from the client as a user, wich userID on the server has permission to it).
What i'm doing wrong?
When searching the internet for nfs-problems / howto's, it seems, the arch configuration is a little bit different than on, for example, suse linux / debian linux. For example, it seems the option NEED_IDMAPD/NEED_GSSD seems to be obselet?
Greetings from Germany,
Sebastian
Last edited by Arakis (2015-05-18 12:54:26)

I too would recommend coordinating UID and GID. That's what I do. However, you could try the following (not sure how it will work now that /etc/idmapd.conf is gone) ...
Configure NFS4 module:
$ cat /sys/module/nfs/parameters/nfs4_disable_idmapping
If it is "Y", then:
# echo N > /sys/module/nfs/parameters/nfs4_disable_idmapping
# echo "options nfs nfs4_disable_idmapping=0" >> /etc/modprobe.d/nfs.conf
Clear the idmap keyring of all existing keys:
# nfsidmap -c
Restart ID-name mapping service:
# systemctl restart nfs-idmapd.service
I've not tested this, so good luck! :-)
(edited to change "nfs4_disable_idmapping=1" to "nfs4_disable_idmapping=0")
Last edited by Painless (2015-05-21 16:24:53)

Google maps does not work

I have Snow Leopard 10.6.8 on my Macbook Pro. No matter which browser I use, Google maps will not render the map detail - instead it just shows the target location with a letter 'A' or whatever, but the background map is just grey with no features. It makes no difference how long I wait either. I have used the various features in browsers to clear out the 'junk' and have used 'reset safari' when in that browser, Still no joy. I have had the MBP for two years and I expect this simple feature to work as it does on all my Windows PC's and iPhone. I am at my wits end and feel somewhat duped into the Apple world by the triumph of 'form' over function. I want to love my MAC but it aggravates me instead because I spend too much time trying to figure out how to get basic features working when in fact they should work first time without user intervention.
Has anyone got a 5 minute fix for this ridiculous fault please? I cannot upload a screen grab either because (1) this Apple forum wont allow upload of my screengrabbed jpgs of tiffs, or (2) my MBP wont allow it (despite them being within the expected size limit). Another spectacular own goal by Apple.

Have you tried a PRAM and an SMC reset? They're longshots, but don't take long to try.
PRAM: http://support.apple.com/kb/HT1379
SMC: http://support.apple.com/kb/HT3964
Have you run Apple Diagnostics from the disc(s) that shipped with the computer?
Since the problem occurs in all browsers, it still sounds like a video hardware or video RAM or maybe a software issue having to do with layers and rendering.
The map layers aren't getting rendered, or if rendered, aren't getting displayed.
Do you have any browser add-ins? Pop-up blockers?
Since you have two video chipsets, it's possible that might be related to the issue.
This non-Apple website talks about switching between chipsets on the various MacBook models so equipped, and points to a free 'donationware' program for the menubar that lets you easily switch between chipsets:
http://www.everymac.com/systems/apple/macbook_pro/macbook-pro-unibody-faq/macboo k-pro-unibody-switching-between-graphics-processors.html
Trying to think of other software that might help pinpoint the problem, does the iPhoto Slideshow 'Shatter' template work? Working properly, it 'shatters' images into several color layers and rotates them in and out to build and deconstruct photos.

Formula function in formula of type Rate Value Calculation does not work

Hi,
We are trying to prorate eligible salary based on some business rules.
We have defined Standard rates with calculation method as 'Calculate for Enrollment Rule' and attached a formula in the 'Value Rule' field.
Now inside the formula, if i directly return a value like 'Return 9000' , it works correctly. However, if i have a fomrula function and return the value as follows,
l_value = CUSTOM_FF_FUNCTION()
retunr l_value
it does not return value.
I have attached a package function that simply returns 4000 just for debugging.
Even this does not return the value back to the formula
Any pointers will be useful
Thanks,
LN

Sorry. I had not checked this post earlier.
We had 2 functions with same name and same contexts on the same database. Each of the functions called a separate package function and had its own logic.
So sometimes the first function was called.At some other times, the second function was called.
We deleted one of the functions and the formula worked well.

Value help does not work for ONE person only !

Hi,
we have a strange problem. In the Web IC, we are using a standard value help for the country field for a Business Partner. This works fine for everyone (ie, it picks up the country and slots it into the field) except one person. For her, it never returns any value into the country field. We are guessing that it's not Web IC related but is something in her browser settings etc...but haven't been able to pin it down. Can anyone offer any advice on this ?
thanks for looking.
Malcolm.

Hello Malcolm,
If this error occurs for one user only it's definitely related to the clients PC.
Did you already delete all temporary files and the cookies on that PC? Usually this does the trick!
If this does not solve the problem, try to let that particular user login on another PC where the problem does not occur. (If the error does occur on another PC too it's probably profile/authorization related)
Hope this helps!
Regards,
Joost

Nokia maps does not work off line

Nokia Maps doesn't work off line but Nokia Drive does on my Lumia 900). Anybody knows why?
Solved!
Go to Solution.

Nokia Drive can use offline maps on WP7.x devices, not Nokia Maps
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

Crystal report 10 export to MAPI does not work in Windows 7

hi:
I am using CR10 10.0.5.1025 in Windows 7. I tried to export a report to MAPI and got error:
Error 2147500037 returned by function <MAPIResolveName>
This error occurs both Office 2007 and 2003
Any one see this error before?

SOLUTION
Hi, (excuse my bad english)
The client have and use Windows 7 SP1 x64 Ultimate version .
He use Crystal Report XI R2 Sp6
PROBLEM:   He has a MAPI error Error when exporting PDF to MAPI.
                      He Receiving the following error message when trying to export PDF Crystal Report to MAPI.
                      Error 2147500037 returned by function <MAPIResolveName>
                      Email Client: MS Outlook 2007
SOLUTION:   Were I found on the internet.
Auhtor is: Andrew Whittam
Web Link: http://www.2icsoftware.com/Support/Forum/tabid/110/aff/2/aft/1105/afv/topic/Default.aspx
Microsoft decided to no longer support the 'Simple MAPI' email system in Windows 7. Although countless applications use it to manage emails, including 2ic Pallets, a replacement system has not been provided.
So Windows 7 users have two options:
Manually create email messages by copying and pasting information from the '2icEmail.txt' file that is created whenever there is an emailing error, i.e. every time you try emailing with Windows 7.
Downgrade the ' C:\Windows\System32\Mapi32.dll ' file to an earlier version, i.e. replace Mapi32.dll with the same file from a Windows Vista or XP computer.
Downgrading seems to work ok. Mapi32.dll on Windows 7 has version number 1.0.2536.0, which is the same as Mapi32.dll on Windows Vista and XP. However, downgrade AT YOUR OWN RISK and check with your system administrator before making any changes.
It is strongly recommended to rename the existing Mapi32.dll file rather than delete it so it can be restored if you find other programs do not work after downgrading. To downgrade, follow the steps below:
Open Windows Explorer, navigate to ' C:\Windows\System32   ' (or ' C:\Windows\SysWOW64 ' for 64 bit operating systems), find Mapi32.dll and rename it to Mapi32.dll.OLD or Mapi32.dll.2ic. If you receive the message "You require permission from TrustedInstaller to make changes to this file." or some other permissions-related error, change the Owner of the file and permissions before trying again, i.e. right-click on Mapi32.dll, select Properties, Security tab, click Advanced, Owner tab, click Edit..., select "Administrators", OK the dialog boxes, again right-click on Mapi32.dll, select Properties, Security tab, click Edit, select "Administrators", allow Full Control and OK the dialog boxes. For more detail, good instructions can be found at http://helpdeskgeek.com/windows-7/w...dinstaller.
Run the 'Email patch' from the Downloads - Utilities page of this website. This patch installs and registers the files below.
C:\Windows\System32\Mapi32.dll
C:\Windows\System32\MSmapi32.ocx
Note they are only installed when missing or replacing an older version. For 64 bit operating systems these files are updated in the 'C:\Windows\SysWOW64' folder. Alternatively these files can be manually copied from a different computer and registered using Regsvr32.
The email functionality can be checked using the 'Export/email test spreadsheet', also available on the Downloads - Utilities page. Using this spreadsheet to generate an email on Windows 7 before downgrading should result in an error message. Emailing should work after running the patch.
RESULT:       I fixed the problem customer PC. TEST and Verification are fonctionnal.
Steve
Edited by: sstmartin on Mar 18, 2011 9:11 PM

CF10,0,11,285437 global UNC Mapping does not work?

Maybe the way global UNC mappings are supposed to be added has changed?
When I under ColdFusion 9 add the following mapping via the adminstrator interface:
Logical Path = /SharedFiles
Directory Path = \\webroot\sites\_SharedFiles
The url http://somesite.com has it's path set to \\webroot\sites\somesite in IIS7.5
Browsing http://somesite.com/SharedFiles/some.cfm renders the cfm fine, since the CF9 mapping for SharedFiles works without any issue.
When I under ColdFusion 10,0,11,285437 add the following mapping via the adminstrator interface:
Logical Path = /SharedFiles
Directory Path = \\webroot\sites\_SharedFiles
Again, the url http://somesite.com has it's path set to \\webroot\sites\somesite in IIS7.5
First thing I notice as different is that CF10 shows the Directory Path as //webroot/sites/_SharedFile instead of \\webroot\sites\_SharedFiles
Clicking EDIT still has the Directory Path exact as I wrote it thou...
Browsing the url http://somesite.com/SharedFiles/some.cfm throws a 404 Not Found, since the mapping doesn't work with CF10, it points to \\webroot\sites\somesite\SharedFiles\some.cfm instead of what is specified in the mapping.
This is rather critical when hundreds of sites are setup to use such a global mapping, and we can't really switch to CF10 before this works again.
Message was edited by: F4798w85gasdg
Added some red and blue color to make it easier to read

Found something which I miss for CF10.
In CF8 you can:
Adding a virtual web mappingA virtual web mapping lets you map a physical system path to a logical resource path that might be outside the ColdFusion MX web root. For example, you might want to map the physical directory c:\myapp\resources\images to the logical resource path /images. After setting up the mapping, users access the directory using a URL in the following form:
http://hostname/images/
One advantage to using virtual web mappings is that it hides the physical layout of your application directory structure from users.
To configure a virtual mapping:
1
In a text editor, open the file web_root\WEB-INF\jrun-web.xml.
2
Create a virtual mapping.
For example, the following entry maps the c:\myapp\resources\images directory on a Windows system to the virtual directory /images:
<virtual-mapping> <resource-path>/images/*</resource-path> <system-path>c:/myapp/resources/images</system-path> </virtual-mapping>
http://www.adobe.com/support/coldfusion/adv_development/config_builtin_webserver/config_bu iltin_webserver08.html
Question is just if this can be done with C10 and where.
EDIT: Found the solution, just had to add it as alias in server.xml's host context section

Trusted Reconciliation Status mapping does not work - 11g Release2

Hi all,
On my process for trusted reconciliation I have mapped my status attribute to Oim 'Status' attribute. It is as follow:
UserStatus -> Status
On my custom scheduled task I transform the status data get form HR (my trusted system) with the values 'Active', 'Disabled','Deleted' and create a reconciliation event.
Even the value I set for the status is 'Active' , afte reconciliation the status is not updated and it is 'Disabled'., what may be the problem? any help is strongly appreciated
Part of my reconciliation event creation code is as follow :
     params.put(AttributeConstants.TCMB.ROLE, "Consultant");
     params.put(AttributeConstants.TCMB.ORGANIZATION_NAME, "Xellerate Users");
     params.put(AttributeConstants.TCMB.XELLERATE_TYPE, "End-User");
     params.put(AttributeConstants.TCMB.DISPLAY_NAME, resourceData.getName()+" "+resourceData.getSoyadi());
     params.put(AttributeConstants.TCMB.IDENTITY_STATUS, UserManagerConstants.AttributeValues.USER_STATUS_ACTIVE.getId());
     System.out.println("Active param : "+UserManagerConstants.AttributeValues.USER_STATUS_ACTIVE.getId());
     System.out.println("Disabled param : "+UserManagerConstants.AttributeValues.USER_STATUS_DISABLED.getId());
     System.out.println("Deleted param : "+UserManagerConstants.AttributeValues.USER_STATUS_DELETED.getId());
     long result = recObject.createReconciliationEvent("TCMB_PBS_TRUSTED", params, true);
Thnaks in advance,
BR
Aliye

I would say don't supply status info for recon. OIM will update automatically based on start date and end date.
If you have special scenario then sure we have to map it and try params.put(AttributeConstants.TCMB.IDENTITY_STATUS,"Active") for same.
Better ignore passing status attribute. Lets OIM decide.
--nayan

Map does not work in IPad 3

Map on IPad 3 stopped working post update to IO6. Prior to this update, I was able to use direction (i.e. GPS) functionality on IPad MAP but now "direction" option doesn't work and everytime I try finding direction it keeps giving error "Direction Not Available... Direction could not be fouond ..."
Is this a known bug / issue and any idea by when this will be resolved?

Hi,
Are the pdf files in which you are trying to highlight are scanned copies?
Also are the pdf files password protected?
In password protected files user is not allowed to add any comments.
Thanks,
Ankit

Posting date = Value date does not work

hi,
   this is the problem given by them,
symptom:
When the parameter 'Posting date is value date' is active, the posting date of all movements of a bank statement is the bank statement date and not the value date of the individual movements of the bank statement.
other terms:
RFEBBE00,CODA,Belgian Bank statement,PAR_VALD,FEBPDO-BEVALD,FEBBEVALD
Reason & Prerequisites:
The program converts the belgian bank statement format to the Multicash format.The multicash format uses the bank statement date as the posting date.
I want to know how the logic is done so that we will get the posting date = value date and in which user exit is it written?
Plz help me.
Regards,
Shalini

Basically can you please clarrify your requirement as to what you want to change ..what I understand you would need to change the code for ABAP - RFEBBE00
Value Date code in the above abap
        IF PAR_VALD = 'X'.
          MOVE C2-VALDT TO HLP_VALDT. " VALUE DATE
         write hlp_valdt to umsatz-budat dd/mm/yy.
        ELSE.
          MOVE C8-BALDT TO HLP_BALDT.
          MOVE HLP_BALDT TO HLP_VALDT.
        write hlp_valdt to umsatz-budat dd/mm/yy.
        ENDIF.
           MOVE HLP_VALDT(2) TO UMSATZ-BUDAT.
           MOVE HLP_VALDT2(2) TO UMSATZ-BUDAT3.
           MOVE HLP_VALDT4(2) TO UMSATZ-BUDAT6.
Regards
Anurag
Message was edited by: Anurag Bankley

Steve, "Simple JSF Popup List of Values Page " does not work..

Hi Steve,
I read "Not Yet Documented ADF Sample Applications" #80 : "Simple JSF Popup List of Values Page " and download SimpleADFBCLOVJSF.zip, but when I try to run the sample, I get this error :
JBO-33001: Cannot find the configuration file /xxx/common/bc4j.xcfg in the classpath
What is wrong ?
Thank you,
xtanto

Thanks for reporting this. I've uploaded a newer version of the zip file that fixes this issue.
It was due to a last-minute refactoring of my model project from having the application module living in a package named "xxx" to another package named "example.model"

Value mapping does not work

Similar Messages

Maybe you are looking for