Value not fully shown on report

I'm trying to show a field with key and name. the field is in free characteristics.
when I right click on it and select filter value, i see values like "P150/12/345" . but when I select the field in rows, i only see "12/345". The company code (P150) is not shown.
What could be the possible reasons
thanks in advance
Fran

See that is the way a compounded char works. The P150/12/345 value that you see is actually made up of 3 InfoObjects with values : P150, 12 and 345. Now if you are "fixing" the P150 value in the query, then the system has no need to unnecessarily display that value all along the data cells. If you remove the filter, you will see the complete display.
Hope this helps...

Similar Messages

Printernames not fully shown?

Hi,
I've got a bit of a tricky problem and hope that you can help me:
One of our customers has several shared printers, the names are identical except the addition of (black) and (color) at the end.
Now, when I open up Adobe Reader and want to choose the desired printer, the names are not fully shown (below):
As you can see, that's not very convenient - is there any solution other than renaming the printers? (a horizontal scrollbar, like there is one in other products maybe?) Thanks in Advance for any help!

Hi CowboyinAZ,
thanks for the reply! The popup/balloontipp would be a pleasant enough solution - unfortunately, I don't get said balloontipp when I hover my mousepointer over the printername :-( At least not in WinXP, that is.

Sales order values not coming in copa report can been seen in ke24

hi
i have did sd and billing and actual settlement through va88
i can able to values in ke24 actual line items.
but when i cant able to see values in ke30 copa report aganist sales order characteristic
and aganist record type A values are not flowing in copa report.
please help me.
thanks
kareem

hi ajay,
i have again prepare actual line items report from ke94 ,ke91 and executed report ,
here for that particular sales order values are flowing through record type C but not flowing for record type A.
sales order is not displaying for record type A.
and for that c only revenue and and raw material cost is flowing.
thanks
kareem

L.C value not appearing in MB51 report

Dear gurus,
The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

Dear Jay,
It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated in the below path
SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
Goods receipt made after this change will be triggered the finance document.
R,
amala

SSRS Report is not fully shown in browser

Hi All,
I have made a report using SSRS (Visual Studio 2013).
But when I deploy it on report server and then view it in browser using URL for e.g. http://myserver/reports then
the report is cut off from right side, that means it only shows half of the report. When I export that report to Word then it also displays fine.
Please let me know how to fix this one.
Thanks and Regards,
SK2811

Hi SK2811,
Based on your description, you are experiencing the issue when you viewing the report in Browser on Report Server, The report with some display issue that you can just see left half of the page, but when you export to Word it will display fine, right?
In your scenario, the issue could be related to the Browser settings or the compatibility between Report Manager and Browser. First, please check the version of the SQL Server Reporting Service and then check the type and version of your Browser. Not all
browsers support all report functionality.
Planning for Reporting Services and Power View Browser Support (SSRS 2012) (This article describes the support and requirements for Report Manager management features, viewing reports, the Report Viewer controls in Visual Studio)
If it is IE Browser you can have a quick test by changing the browser version before view the report to see if the same issue will reproduce:
Launch the IE , and press F12
Click Emulation icon on the left of the bottom and in the User agent string dropdown list select an supported version.
If the supported version works fine, try to reset IE to that version. Please also check the result in IE Compatibility View mode.
If still doesn’t help, you can reference to below similar thread and do the setting:
SSRS 2008 - Vista Security - Header Only
If you still have any question, please feel free to ask.
Thanks
Vicky Liu

Values not showing up in Report

Hello experts,
I have saved data using Input schedules for certain combinations. Now I want to see the data in the report but here the problem, I am able to do so if I am giving the exact combinations as there in IS.
For example: I have entered data at GL account level for certain BLI. if I select BLI and Time in row and column axis respectively I am expecting to get the aggregated data but this is not happening.
Instead in the log file there are some error messages.
2014-06-10 09:58:56,173|ERROR|FPMXLClient|FPMXLClient.ReportManagement.SheetReport.IsValidForReportUpdate|INFBPC4|||||1|Exception of type 'FPMXLClient.Common.MissingAxisException' was thrown.#
Any idea about this?
Regards,
Kavita

Kavita,
This is really confusing.
What is BLI, CLI, dimension members (parent or base) of which dimension? What is the structure?
How can I get the overall values sum for my Entity. --> Are you posting data entitywise - say to multiple entities and then are you not able to see data at the parent node of entity?
I am not seeing the net values but the value are based on the BLI in context lock. --> What does this mean? If BLI is entity member, don't you have this in your row axis? Context won't have any role to play if you have it in your row axis.
Please be a bit clear about what data have you saved, and then what is the structure of your report.
Regards,
Ashish

Drill down value not matching with Displayed Report Painter Issue-GR55

Hi,
Need your help for an issue in drill down value of report painter from actual cost coloumn.
I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
Could you suggest on this issue.
Thank you for your cooperation.
Regards,
Rakesh

The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

Values not appearing in Controlling reports

Hi Gurus,
For following reports I am not getting any values .Is I am missing any configuration.My client needs to be resolved on top priority.
S_ALR_87013139 - Target/Actual/Production Varainace - Cumulative
S_ALR_87013140 - Target/Actual/Production Varainace - Periodic
S_ALR_87013142 - Target/Actual Comparison - Cumulative
S_ALR_87013143 - Target/Actual Comparison - Periodic
S_ALR_87013145 - Plan/Actual Comparison - Cumulative
S_ALR_87013146 - Plan/Actual Comparison - Periodic
S_ALR_87013148- Variance Catergories Cumulative
S_ALR_87013149- Variance Catergories Periodic
Regards,
Nitin Amritkar

Nitin,
I would suggest you to close this thread here post this to CO-Forum for better response.
Regards,
Prasobh

Screen value not being captured in Report

Hi,
I have a designed a report program with multiple tabs. When i enter data into the selection fields, its not storing the values during the start of selection event. When i save the values as variant and then use it, the program works perfectly.
Can some one tel me what peice of code can be added to read the screen values during start of selection?
Regards,
Niyaz

Hi Masood,
Thanks for your reply.
Any ways thats solved by reading the value from the form_fields table in the
DO_HANDLE_DATA event of the view.
Masood,
I have a different question as
I have a requirement wherein I have to
get a field similar to NOTES field we see in the Web UI , I tried using the textbox but i dont think we can process data inside the textbox.Is there any other way by which I can achieve this requirement.
Any suggestions will be highly apprecited.
Regards,
Sijo

Value not match in KEAT report with FI

Hi All,
I am going through KEAT report, here is saw that the value of one GL Account in FI value Column does not match with the value of the same GL in FBL3N.
Is there is any particular reason as other GL account value matches with the value in FBL3N.
Regards,
Shayam

KEAT shows values posted from the SD module only. If the value is not the same as the account total, then possibly someone has posted to that account directly from FI (TC FB50 or similar). You should be able to find such manually posted documents in FBL3N by looking at fields like "reference" "document type" and such.

Dashboard prompt value not carried over to report in a Link on Dashboard

The Dashboard prompt value is not carried over to the report displayed as a link on the dashboard. The report has the 'Is Prompted' filter. It does not work in both cases:
1. when the report in the shared folder is specified in the link.
2. when the report in a different page on the same dashboard is specified in the link.
Please help.

First change column data format to HTML.
Then use following syntax:
'<aa href = "http://server/analytics/saw.dll?Dashboard&PortalPath=%2Fshared%2FPortal%2Ffolder&Page=pagename&Action=Navigate&P0=3&P1=eq&P2=Tablename1.column1&P3=1+'|| cast(Tablename1.column1 as varchar(30)) ||'&P4=eq&P5=tablename2.column2&P6=1+'|| cast(Tablename2.column2 as varchar(30)) ||'&P7=eq&P8=tablename3.column3&P9=1+'|| cast(Tablename3.column3 as varchar(30)) ||'" TARGET="_blank"> <ffont color = #000099>'|| cast(Tablename1.column1 as varchar(30)) ||'</ffont></aa>'
change ffont to font and <aa to <a and </aa to </a

Total values not reflecting in copa reporting

Dear All,
I have configured COPA (Costing based) & assigned all SD condition types to copa value fields.When i execute profitability analysis the report is giving correct output for following example
Particulers                                     Qty           Amount
Customer 1
Sales Domestic (Material No.1)    150        15000
Sales Domestic (Material No.12)   50           5000
Sales Domestic (Material No.23)   30           3000
But the report is reflecting only one entry despite of different line items for same material with different qty .
Particulers                                Qty     Amount
Customer 1
Sales Domestic (Material No.1) 265    26500
Sales Domestic (Material No.1) 100   10000
Sales Domestic (Material No.1) 175   17500
Kindly tell me why this is happening.
Regards,
Sany.

Hi,
Check report format, if there is filter as per material or not, if it is there then remove the filter and also execute report as per sales order.
regards,
sreekanth

WCS and WLC AP values not fully in sync.

I have recently added several new aps on my network,after they connect to the controller, I set a hostname, and change the ip address to a static. However, WCS still sees the aps by the old ip and host name despite going into each one, hitting audit, and then save, any way to fix this? Thanks.

You may want to also consider the following:
1) Both the WCS and the WLC need to be at the same major revs (i.e.: The if the WCS is at v4.2, then the WLC should also be at 4.2). Failure to do so results in some significantly bizarre behavior such as errors after an audit - at least that was my experience.
2) You may have better success if you make the change from the WCS which pushes the change to the WLC and that way the WCS is already aware of the change. (Normally, this should work - I know of one instance where it does not: changing Master Controller Mode from the WCS).
3) If you feel strongly about making the change in the WLC (and are running a newer version of code in the WCS/WLC - i.e.: 4.x), there is a setting that forces the WLC to send configuration changes to the WCS once APPLY and "Save Configuration" are clicked:
From the *WCS*, click on Configure->Controllers and click on the controller you wish to change, and check the "Refresh on Save Config Trap" check box and click OK.
This will cause the controller to push any configuration changes up to the WCS after an APPLY and "Save Configuration" are clicked.
4) In terms of getting the WCS to actually synch up with the controller (assuming the WCS and WLC are at the same rev. levels), you may need to do what I did (this was subsequent to upgrading to v4.2 in both the WLC and WCS and having chronic "mismatch" status between the WCS and WLC):
From the WCS:
Configure->Controllers, check the controllers you wish to synch up. From the dropdown, select "refresh config from controller"
Next, select the DELETE option (instead of the RETAIN option). I believe that there are bugs in the software that upgrades earlier revisions to 4.2. I know that it might seem undesirable to DELETE information in the WCS, however, if you choose "DELETE", it seems to get rid of the residual information from the previous revisions that did not upgrade properly and the WCS will now be in synch with the controllers. DELETING the other settings makes the audit errors go away.
Subsequent audits may go better for you after performing the step shown above. However, you may need to repeat this process in item 4 above once or twice more until the database gets cleaned up, but after that my own experience has been that the WCS and WLC will eventually stay in synch.
It is unfortunate that we are forced to come up with workarounds like these when the software should clearly be able to handle this on its own, but we do what we must to get the job done.
Hope this helps,
- John
(Please rate helpful posts)

Personas not fully shown

i downloaded firefox 8 and persona on top isn't fully visible, i also want more options on my toolbar and when i try to add items on toolbar lay out and press done it disappears, if to hard to solve how do i go back and reset previous toolbar, pleez?

Hi CowboyinAZ,
thanks for the reply! The popup/balloontipp would be a pleasant enough solution - unfortunately, I don't get said balloontipp when I hover my mousepointer over the printername :-( At least not in WinXP, that is.

Master data infoobject values not presneting in the report

I have one infobject.that contains 50 values.
If i open the query desinger and in dimension if i open my infobject i can see only 30 records only,,,
how can i get 50 records?
master data is activated.......if i am trying to activate it shows as alearady masterdata is activated
Regards

Hi,
Activation seems to be the issue:
use the below program
RSDDS_AGGREGATES_MAINTAIN.
Simply give the Infoobject name which you want to activate and execute.
Reward if useful
Manish

Value not fully shown on report

Similar Messages

Maybe you are looking for