Total values not reflecting in copa reporting

Dear All,
I have configured COPA (Costing based) & assigned all SD condition types to copa value fields.When i execute profitability analysis the report is giving correct output for following example
Particulers                                     Qty           Amount
Customer 1
Sales Domestic (Material No.1)    150        15000
Sales Domestic (Material No.12)   50           5000
Sales Domestic (Material No.23)   30           3000
But the report is reflecting only one entry despite of different line items for same material with different qty .
Particulers                                Qty     Amount
Customer 1
Sales Domestic (Material No.1) 265    26500
Sales Domestic (Material No.1) 100   10000
Sales Domestic (Material No.1) 175   17500
Kindly tell me why this is happening.
Regards,
Sany.

Hi,
Check report format, if there is filter as per material or not, if it is there then remove the filter and also execute report as per sales order.
regards,
sreekanth

Similar Messages

Sales order values not coming in copa report can been seen in ke24

hi
i have did sd and billing and actual settlement through va88
i can able to values in ke24 actual line items.
but when i cant able to see values in ke30 copa report aganist sales order characteristic
and aganist record type A values are not flowing in copa report.
please help me.
thanks
kareem

hi ajay,
i have again prepare actual line items report from ke94 ,ke91 and executed report ,
here for that particular sales order values are flowing through record type C but not flowing for record type A.
sales order is not displaying for record type A.
and for that c only revenue and and raw material cost is flowing.
thanks
kareem

Material regrouping in MM02 not reflecting in COPA report

Hi,
In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
I am designing report for three companies by using material group 1,2,3,4 and 5.
We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
Please suggest on how should we rectify our material grouping to reflect in COPA report.
Regds

Hi,
in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

Changes in MM02 not reflecting in COPA lin item report

Hi,
In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
I am designing report for three companies by using material group 1,2,3,4 and 5.
We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
Please suggest on how should we rectify our material grouping to reflect in COPA report.
Regds

Hi,
in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

Tax value not reflecting in Sales register

Hi All,
i created an order and Invoice is also generated for the same. but the TAX value for the order is not reflecting in sales report.
i checked in V/08 the print option is ticked. what can be the problem what setting i should do to get that value in sales register?
Thanks
Ashwini

Hi Ashwini,
You mean to say output (sales register) ? if yes please check you your output program with help of ABAPer,check the condition type and value whether its picking the condition value or not.
Thanks
Ram

Down Payment entries not reflecting in J1INMIS report

Dear Guru's,
TDS deducted at the time of down payment made to vendor is not reflecting in J1inmis report.
Is J1INMIS report does not reflect down payment entries?
What will be the reason for this?
Which alternative report to followed for J1INMIS !!!
Waiting for your positive reply.
Regards,
Sany.

Hi Sany,
To update Business Place & Section Code, execute the program given below. After execution of the program run T.Code J1INPP and your issue should get resolved. Let me know if this works.
Ask the Abaper to write the following Code & execute the program:
REPORT ZFI_BUP_SEC_CHANGE.
TABLES : BSIK,BSAK,BSEG.
parameters: PA_BELNR TYPE BSEG-BELNR OBLIGATORY,
            PA_BUKRS TYPE BSEG-BUKRS OBLIGATORY,
            PA_GAAHR TYPE BSEG-GJAHR OBLIGATORY.
PARAMETERS : PA_BUPLA TYPE BSEG-BUPLA NO-DISPLAY,
             PA_SECCO TYPE BSEG-SECCO NO-DISPLAY.
PA_BUPLA = 'MUM'.                               (Note : Use the Business place & section Code Used
PA_SECCO = 'MUM'.                                         in your company code).
START-OF-SELECTION.
PERFORM CHANGE_DATA.
END-OF-SELECTION.
*&      Form CHANGE_DATA
      text
--> p1        text
<-- p2        text
FORM CHANGE_DATA .
DATA : LT_BSEG TYPE TABLE OF BSEG WITH HEADER LINE,
       LT_BSIK TYPE TABLE OF BSIK WITH HEADER LINE,
       LT_BSAK TYPE TABLE OF BSAK WITH HEADER LINE.
BSeg updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSEG
FROM BSEG
WHERE BUKRS = PA_BUKRS   AND
      GJAHR = pa_gaahr   AND
      BELNR = PA_BELNR.
LOOP AT LT_BSEG.
IF LT_BSEG-BSCHL    = '25' OR LT_BSEG-BSCHL = '26'
     OR LT_BSEG-BSCHL = '27' OR LT_BSEG-BSCHL = '28'
     OR LT_BSEG-BSCHL = '35' OR LT_BSEG-BSCHL = '36'
     OR LT_BSEG-BSCHL = '37' OR LT_BSEG-BSCHL = '38'
     OR LT_BSEG-BSCHL = '39'.
    LT_BSEG-BUPLA = PA_BUPLA.
    LT_BSEG-SECCO = PA_SECCO.
    MODIFY BSEG FROM LT_BSEG.
    Write : / LT_BSEG-BELNR, 'Update For BSEG', LT_BSEG-BSCHL,
              LT_BSEG-BUPLA,LT_BSEG-SECCO.
ENDIF.
ENDLOOP.
Bsik updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSIK
FROM BSIK
WHERE BUKRS = PA_BUKRS   AND
      GJAHR = pa_gaahr   AND
      BELNR = PA_BELNR.
LOOP AT LT_BSIK.
IF LT_BSIK-BSCHL    = '25' OR LT_BSIK-BSCHL = '26'
     OR LT_BSIK-BSCHL = '27' OR LT_BSIK-BSCHL = '28'
     OR LT_BSIK-BSCHL = '35' OR LT_BSIK-BSCHL = '36'
     OR LT_BSIK-BSCHL = '37' OR LT_BSIK-BSCHL = '38'
     OR LT_BSIK-BSCHL = '39'.
    LT_BSIK-BUPLA = PA_BUPLA.
    LT_BSIK-SECCO = PA_SECCO.
    MODIFY BSIK FROM LT_BSIK.
    Write : / LT_BSIK-BELNR, 'Update For BSIK', LT_BSIK-BSCHL,
              LT_BSIK-BUPLA,LT_BSIK-SECCO.
ENDIF.
ENDLOOP.
BsAk updation
SELECT *
INTO CORRESPONDING FIELDS OF TABLE LT_BSAK
FROM BSAK
WHERE BUKRS = PA_BUKRS   AND
      GJAHR = pa_gaahr   AND
      BELNR = PA_BELNR.
LOOP AT LT_BSAK.
IF LT_BSAK-BSCHL    = '25' OR LT_BSAK-BSCHL = '26'
     OR LT_BSAK-BSCHL = '27' OR LT_BSAK-BSCHL = '28'
     OR LT_BSAK-BSCHL = '35' OR LT_BSAK-BSCHL = '36'
     OR LT_BSAK-BSCHL = '37' OR LT_BSAK-BSCHL = '38'
     OR LT_BSAK-BSCHL = '39'.
    LT_BSAK-BUPLA = PA_BUPLA.
    LT_BSAK-SECCO = PA_SECCO.
    MODIFY BSAK FROM LT_BSAK.
    Write : / LT_BSAK-BELNR, 'Update For BSAK', LT_BSAK-BSCHL,
              LT_BSAK-BUPLA,LT_BSAK-SECCO.
ENDIF.
ENDLOOP.
ENDFORM.                    " CHANGE_DATA
Thank You.

Characteristic Values are not updated in COPA Report

Dear Gurus
I have created one characteristics and derive the value out of derivation rule but the same is not appearing in the COPA Report even though I mapped that Characteristics in my COPA Report. Please advice and help.
Sivakumar Subramanian

Dear Jayaram
While creating the Derivation Rules I checked the derivation is working fine or not by giving the inputs and it is working and no error in deriving the characteristcis.
Please help.
Sivakumar Subramanian

Sale quantity is not updated in COPA report

Dear All
I am using Account based COPA. In the report COGS and the revenue is captured correctly, but the quantity is not coming. While seeing the line items I found that at the time of PGI one line item with +ve quantity is generated and at invoicing one line item with -ve quantity is generated and as a result quantity becomes ZERO. A screenshot is pasted below for the convenience.
Can you please help me in finding the error in my configuration or in report.
Regards
Rajneesh Saxena

Hi Rajneesh sir,
I believed till now that, at the time of PGI only COGS value is transfer to COPA and not even sales quantity in accounting based method, but after observing your thread I need to frame my understanding differently now.
OK, since the Sales quantity is transfered to COPA at the time of PGI, why we need to transfer again at the time of billing?
So, my suggestion is why don't you de-assign the quantity field under the billing settings and try? Transaction code KE4M
Regards...
Jose

Master data updation not reflected in Bex report

Hi,
There is a field "Approver" in a report. It will only show the name of the Approver. And recently the same approver name has been changed in MDM system and now the problem is newly changed name is not reflecting the reporting. It shows the only old name in reporting.
My doubt is, what about already loaded record in BW system. Whether changes will be made for the older data. I mean it is possible to overwrite the approver name stored earlier in BW.
D Raj

Hi
Yes, master is always overwritten.
load the new value to the approver Info object.
in RSA1 -> right click --> activate master data.
Initially when data loaded, records will be Modified version. when you perform activate master data then M versions records will turn to A version.
records with A version are only visible in Report.
If your report is on Aggregates, then you have to perform ACR (attribute change run) to update the same new value in aggregate.
you can use the program RSDDS_AGGREGATES_MAINTAIN.
Regards,
Venkatesh

Check Box values not reflecting in the pageflow instace variable

Hello BEA Experts,
I am binding a checkBox group to an instance variable of a Pageflow , it seems that the array inside the pageflow is null no matter what can you please let me know why.
Is it possible to bind the checkbox group tag to an array in Pageflow or is there anything wrong with the way I am using the checkbox group with in a data- repeater table.
Here are the code snippets..
JSP:
<netui-data:repeaterItem>
<tr class="tablebody">
<td>
<netui:checkBoxGroup dataSource="{pageFlow.nodeIds}">
<netui:checkBoxOption value="{container.item.nodeId}">&nbsp
</netui:checkBoxOption>
</netui:checkBoxGroup>
Contoller:
Has a private instance varible named nodeIds with getter and setter methods..
Please let me know why the checked values are not reflecting in the pageFlow attribute.

Hi Bob
I didn't understand fully what you are trying here. Could you please clarify?
I assume that you have a Array of NodeId objects.
Lets say:
Public NodeId[] nodeids = new NodeIds[10];
and you want a checkBoxGroup mapped to NodeId[]
and have as many checkBoxOption as number of elements in array with value as NodeId(i).nodeId
Is this assumption correct?
If the above is correct then the code snippet you have pasted is wrong in the sense that checkBoxGroup datasource is the array but the Option value is the main repeater item's nodeId which is wrong.
The container.item would not access anything within the pageflow variable.
I will post a sample in the next one
Vimala-

PS 2013 - Changing the formula in custom field not reflected in the report columns

Hi,
The company where I work have a Sharepoint environment / EPM 2013 with about seven hundred registered projects.
We have a customer demand where it is necessary to change the formula of one of the custom fields of the environment. This field is used in some management reports made in Reporting Services and accessed by the entire board. The report uses as a source
'MSP_EpmProject_UserView' view.
The change in formula was simple, but we found that the change will not be reflected in the reports when the user saves the project in Sharepoint or publish the schedule associated with the Project.
I believe this is the expected behavior of the EPM, but I wonder if there is some other way than through the PSI, to publish all environmental projects.
Best regards,
Armando Machado Gonçalves - Sharepoint / EPM 2013

Hello,
That is expected, it will not update until the project is open and republished. No automatic way to do this without automating project pro. Publishing all projects via the PSI wont cause the plan to recalculate, the plans will need to be opened.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Container Variable value not reflected in Alert message

Hi All,
In BPM, i am trying to set an Alert message which will send the message in alert Inbox. Here i have stored a value from the message in a container variable. This Container variable value is used in the Alert message in the form of &variable&. But whenever i specify container variable value, it is not reflected in the Long text of Alert Inbox. In Alert category i have also checked the Dynamic text. Still it is not coming.
Can u suggest what is the possible solution for this.
Thanks in advance
Ashish

I was able to get the Alert Message by changing container variable from "Block " to "Process". But It was containing the value of the first message.
Actually i am having a scenario in which i am transforming a File message input into multiple messages based on its PO number using multi mapping. These messages are send as IDOCs using Parrallel for Each block, where i store the PO number in the container variable and use it in alert message. So for that i have to use this block name as container and not as a Process.
Can anybody tell me why this Container Variable value is not reflected in the alert message.
Thanks in advance
Ashish

L.C value not appearing in MB51 report

Dear gurus,
The l.c value not appearing in MB51 t.code,are there any other reports to see this values if so,plz explain in detail

Dear Jay,
It will be available in MB51, may be check your variant for hidden fields or your authorization, You will get in MR51 also
In Standard SAP System Asset GR will not have any Finance document at the time of Goods Receipt, So you are not getting Amount in LC, If you want to trigger finance document at the time of GR, you have to change the account assignment category A properties like i.e., remove the tick of GR Non valuated in the below path
SPRO-->Materials Management-->Purchasing-->Account Assignment-->Maintain Account Assignment Categories, Select A
Goods receipt made after this change will be triggered the finance document.
R,
amala

Search Help Selected Values not reflected in WebUI

Hello All, We have a requirement to create a standard F4 value help for PRODUCT_ID field and the selected value should be reflected in the WebUI field. This field is in a table view context node and the component is a stand alone WebUI component. Everything works fine till the Search help is called and the values is selected. But the selected value is not reflected in the Product_ID field. We have checked many forums and links and tried almost all the alternatives suggested. Here's is the code attached for reference.
DATA:l_wa_map       TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
       l_i_inmap     TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
       l_i_outmap    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
DATA: lv_str_index TYPE string.
* l_wa_map-context_attr = 'product_id'.
* l_wa_map-f4_attr      = 'PRODUCT_ID'.
* APPEND l_wa_map TO:l_i_inmap,l_i_outmap.
lv_str_index = iv_index.
CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
l_wa_map-f4_attr = 'KEY'. "'PRODUCT_ID'. "'
APPEND l_wa_map TO: l_i_outmap.
lv_str_index = iv_index.
CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
l_wa_map-f4_attr = 'VALUE'. "'PRODUCT_ID'.   "
APPEND l_wa_map TO: l_i_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
      iv_help_id        = 'COM_PR_SHTEXT'      "#EC NOTEXT
      iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name "if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping = l_i_inmap
      iv_output_mapping = l_i_outmap
      iv_object_ref     = me
      iv_trigger_submit = abap_true.
Is there any further code or event call required to reflect the value in the WebUI? or what exactly is required to be done here?
Thanks in Advance.
Prasad

Thanks Dharmakasi, your point to use Condense was the issue which was preventing the values from reflecting in the field.
However, below code is not required.
* lv_str_index = iv_index.
CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
l_wa_map-f4_attr = 'PRODUCT_ID'.
APPEND l_wa_map TO: l_i_inmap.
I had another requirement which worked in below way. Note this is for Custom data elements with value help in domain. Hope this is helpful for other folks.
DATA:l_wa_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
l_i_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
l_i_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
DATA: lv_str_index TYPE string.
lv_str_index = iv_index.
CONCATENATE 'table[' lv_str_index '].GC_CARD_TYPE' INTO l_wa_map-context_attr.
CONDENSE l_wa_map-context_attr NO-GAPS.
l_wa_map-f4_attr = 'KEY'.
APPEND l_wa_map TO: l_i_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id        = '/GLB/CNPCR_GC_CARDTYPE'     "#EC NOTEXT
      iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
      iv_input_mapping = l_i_inmap
      iv_output_mapping = l_i_outmap.

Search Help Value Not reflecting in WebUI

Hello All, We have a requirement to create a standard F4 value help for PRODUCT_ID field and the selected value should be reflected in the WebUI field. This field is in a table view context node and the component is a stand alone WebUI component. Everything works fine till the Search help is called and the values is selected. But the selected value is not reflected in the Product_ID field. We have checked many forums and links and tried almost all the alternatives suggested. Here's is the code attached for reference.
DATA:l_wa_map       TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
       l_i_inmap     TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
       l_i_outmap    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
DATA: lv_str_index TYPE string.
* l_wa_map-context_attr = 'product_id'.
* l_wa_map-f4_attr      = 'PRODUCT_ID'.
* APPEND l_wa_map TO:l_i_inmap,l_i_outmap.
lv_str_index = iv_index.
CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
l_wa_map-f4_attr = 'KEY'. "'PRODUCT_ID'. "'
APPEND l_wa_map TO: l_i_outmap.
lv_str_index = iv_index.
CONCATENATE 'table[' lv_str_index '].PRODUCT_ID' INTO l_wa_map-context_attr.
l_wa_map-f4_attr = 'VALUE'. "'PRODUCT_ID'.   "
APPEND l_wa_map TO: l_i_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
      iv_help_id        = 'COM_PR_SHTEXT'      "#EC NOTEXT
      iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name "if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping = l_i_inmap
      iv_output_mapping = l_i_outmap
      iv_object_ref     = me
      iv_trigger_submit = abap_true.
Is there any further code or event call required to reflect the value in the WebUI? or what exactly is required to be done here?
Thanks in Advance.
Prasad

Hi Kamlesh,
Check that you have checked for import and export in your search help for parameter ATBEZ
Refer my reply in here [F4 Help|HELP NEEDED....F4 VALUE HELP IN WEB UI;
Regards
Jignesh

Total values not reflecting in copa reporting

Similar Messages

Maybe you are looking for