Value not visible in combo box

Hi all,
I have a control bar with 5 combo boxes.
As the user set the value on a box the others are refined to
include only those items that are relative to the user selection.
All works well with one exception in one list the value is
present bu not visible.
Has anyone encountered this before and does anyone know how
to correct it?
Thanks in advance for any help.

Duh.
In the one case where the item fails to show I was not
casting the value as a string.
Casting solved the issue.

Similar Messages

Tab Component Dynamic Visibility to Combo Boxes

I am using a Tab component. I have 3 tabs on my dashboard. I have 2 Combo boxes that I am using to filter rows of data on 3 Excel sheets. Both Combo boxes are not used on all the tabs. How can I pass example: User clicks on Tab 1 and use dynamic visibility for Combo Box 1 and Combo Box 2 are visible. If the user clicks on Tab 2 I want only Combo Box 1 to be visible.

Hi Joe,
This can be achieved in Dynamic visibility.
On click on Tab,just map to some target(say value "1") and then For Combo box,set target cell mapped for tab to 1,which means when the target cell gets "1",show the Combo box.
If you are not clear then you can refer the following URL,which will give you more informations about this.
http://everythingxcelsius.com/2008/08/tip-7-xcelsius-dynamic-visibility-video-tutorial.html
Rgds,
Murali

How to Add/Concatenate to a text field, values selected in a combo box

I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

Thanks so much - it works!
>>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
var f1 = this.getField("Text1");
var f2 = this.getField("Combo1");
if (f1.value=="") f1.value = f2.value;
else f1.value = f1.value + ", " + f2.value;
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do I correctly use Macro Builder to have a form auto select a TAB depending on a value selected in a combo box?

I am working in access 2013 to update a database first created in Access 2003. It has been saved as an accdb but I have the same problem in earlier versions.
I have a Tab Control subform in my MainDataEntry form which has 5 different tabs. Each Tab has its own set of text boxes and combo boxes for data entry. At the top of the MainDataEntry form there is a Text box [Text393], which has a drop down with
the 5 TAB names, [Mobile Device],[Computer],[Loose Media],[Network] and [Original Device]. When I select one of these values in the Text box, I would like to automatically set focus on the first Textbox or ComboBox inside the corresponding TAB.
I have tried to do this using the MacroBuilder inside the "After Update" Property for the Text or Combo box that is on the MainDataEntry Form using "If" and "Else If" statements for the "GoToControl" action, however
I seem to be able to only get one Tab to work. I have tried several different variations of this, putting the If statement first and the action argument second...putting all arguments inside a group, or not grouped....nothing seems to work. What am I
doing wrong?
EXAMPLE:
If [Text393]=[Mobile Device] Then
    GoToControl
         Control Name   Combo471
Else If [Text393]=[Computer] Then
    GoToControl
Control Name   Bios_Date
Else If [Text393]=[Loose Media] Then
    GoToControl
         Control Name   Combo659
Else If [Text393]=[Network] Then
    GoToControl
         Control Name   User Name
Else If [Text393]=[Original Device] Then
    GoToControl
         Control Name   Combo814
End If

In the Macro Builder's AfterUpdate event for [Text393]:
GoTo Control
Control Name =Forms!MainDataEntry.Controls(Text393.Value).Name
To ensure that the first control on each tab receives the focus, set that control's Tab Index property to zero (0).

InfoView - How to Restrict values of Month Dimension Combo Box

Post Author: alexrox
CA Forum: Publishing
Product: Business Objects Enterprise XI R2
Version: XI R2
Patches Applied:
Operating System(s): Linux RHEL 4 x86
Database(s): Oracle 10gR2
Error Messages:Steps to Reproduce:
Hello, we are using Business Objects Enterprise XI R2 in the company I work, and we are facing a problem in some web intelligence reports.Our BO version is in Spanish, so maybe I do not translate some BO terms properly into English.
We have the "Time" class in the Universe we use, and in that class, we have the "month" dimension.
When we create some reports in InfoView, we can use the "month" dimension to display the results of that month (dragging and dropping that dimension in the "Analysis Context" Area).
The user can choose values in the "month" dimention through a combobox in the "analysis context" area. The problem is that Infoview allows the user to select the value "all the values" of that dimension, I mean, all the months, so that the results of the report are according to the "automatic aggregation" calculated of the values of that dimension (all the months).
But, we do not want to allow the user to select that value (all the values) of that dimension, because it causes that the report displays incorrect results (we have some percentages that have incorrect values in the aggregation, for example). I hope that you understand the problem I have tried to explain.
My question is how can we restrict so that the combo box (of the month dimension at the analysis context area ) does not allow to select "all the values"?
Is it possible? If so, do we have to make a change in the universe or is it a restriction of the web intelligence repport?
Thank you very much!
Alejandro Usero Ruiz

Post Author: jsanzone
CA Forum: Publishing
Alejandro,
In your posting, quote "(we have some percentages that have incorrect values in the aggregation, for example).", I'm wondering if you are calculating the percentages within your universe or not? I.e. do you have a universe object that in essence is doing the math? If so, I might suggest that you not do it this way (even though in total aggregation calculations this will produce a valid result), but in disaggregate calculations (during the users "slicing and dicing") the percentages are not re-calculated by the BusObjects tool because it thinks that the data it received from the SQL output is good to go, and this is where the incorrect values in the aggregation start to show up. We had this problem too, so we ceased from calculating at the universe level and built a local variable to the report, thus BusObjects will recalcuate the percentage properly for each level of aggregation that user selects. The downside to this approach is that every report that has percentage calculations will require the local variable to be built for that report. Even users who build their own reports will have to build their own local variable to compute the percentage for their reports. The upside is that the calculations will be correct every time.

Populate 2nd combo box based on value selected in 1st combo box

I am still using Acrobat 6 though I may be upgrading soon to Acrobat 8. I have a form with two combo boxes, the first "state" has values of MN and WI. Based on which value the user picks I would like to populate a "county" combo box with lists of counties that we deal with.
Thanks,
Gene

One can set the option and export value using an arry: // document level script // Master List of Lists // Each entry in this object listeral is the name of a State //Manually enter the State Names into the state field combo box // The associated value is the item list, where each item is a name value pair, [<County> and [county code, zip code]] // state: ["county name", ["county code", "zip code"]] var oStateNames = {MN: [["-", ["", ""] ], ["St. Louis", ["MNStl", "55001"] ], ["Carlton", ["MNSCrl", "55002"] ], ["Pine", ["MNPin", "55003"] ], ["Cook", ["MNCok", "55004"] ] ], WI: [["-", [" ", " "] ], ["Douglas", ["WIDou", "55005"] ] , ["Bayfield", ["WIBay", "55006"] ], ["Burnette", ["WIBur", "55007"] ], ["Ashland", ["WIAsh", "55008"] ] ] }; //SetCountyEntries() on keystroke entry in state field function SetCountyEntries() { if(event.willCommit) { // Get the new counties list from the Master List // Since the selection is being committed, // event.value contains the State name var lst = oStateNames[event.value]; // Clear the county list if there are no counties for the selected state this.getField("ee.address.county").clearItems(); this.resetForm(["ee.address.code", "ee.address.zip"]); if( (lst != null) && (lst.length > 0) ) this.getField("ee.address.county").setItems(lst); // set opiton and export value } } // end document level script For the combo box "ee.address.county" one can create an array from the export value to populate the county code and zip code // custom keystroke for county combo box if(event.willCommit & event.value != "") { // split county and zip codes var aCodes = this.getField(event.target.name).value.split(","); this.getField("ee.address.code").value = aCodes[0]; this.getField("ee.address.zip").value = aCodes[1]; } // end custom key stroke code

How load value in system fom Combo box

Hi,
I want load some value(like aaa,bbb)in Item Master data form-Item groups Combo box.
How to do this one?.
Regards,
Siva

Hi Siva,
Instead of adding data into combobox plz insert data into OITB table then system will shows all values in Item master
data groups combobox.
By
Firos

Why is my text not visible in text boxes?

I have a set of text boxes that I have used throughout my book as little sidebars providing tips to the reader. These text boxes lay out beautifully within iBook Author. When I preview on my iPad, the text within these boxes becomes invisible. The text is still there — if I double tap on the iPad to use the search function, the text can be selected and shows up in the search box, but is still invisible.
I am hoping this is some kind of user error on my part that can be easilly corrected. It appears to affect all two dozen tips I have inserted into the doccument. However, when I create a new text box it seems to function fine, even when following all the same steps to lay it out. You will see this in the green box in I stuck in example for the purposes of obtaining your help. (Please help! )
All the affected text boxes were cut and pasted from the original, so perhaps I set something wrong? It's odd that the preview does not match the iPad layout.
Here are some screenshots to make it more clear. First, the layout in iBooks Author:
Then a screenshot from the iPad after it has been previewed:
It may also be noteworthy that as the preview loads into the iPad, the text is visible, then vanishes as soon as the upload is complete. The small page previews on the ipad when 'zoomed out' to the overview also show the text, though when you go to the page it is still blank. Here is what the small page view looks like:

Did you confirm the text/box is 'to the front'...on the top of everything in that same location? Should work if so.
Yes.
Are they any other elements that are maybe hiding there?
No.
Did you try another font color or font?
Yes. Font, style and color (black, white, grey, green purple) do not appear to have any effect.
Are the boxes anchored graphics...
No, they are free floating but the problem persists if I anchor them.
and is the text in a box on top of the graphic?
No, the text is integrated. The box was made by creating a text box.
Even with different answers, this problem should not occur — if the text were hidden behind something, it should show that way within the program and the small preview, no?

Values not populating in list box in dialog programing.

hi,
i am facing a problem i.e. i am having a listbox on screen , in pbo i am filling that listbox with some values in an internal table.
But i am not able to populate the values i.e. while i am debugging the pai ......the list box is containing nothing.
So needed some help in this issue.
regards,
somesh

Hi,
Try to read these links. It will give you some pointers regarding on your problem.
<link-farm removed>
Revert if you have still any concern.
Thanks,
iostreamax
Edited by: Suhas Saha on Feb 21, 2012 8:50 AM

Value not visible in preview mode

Hello there,
On my dashboard, between other things, I have a simple grid component which should just show some resulted values.
The problem I have is that when I connect the grid with the range of cells, everything looks fine but in preview mode, one line in the midle of the grid is showing "0.0" on all cells of the line and I do not understand why.
The version I have is 5.3.4.0 with build no: 12.3.4.1038
Any idea what to do?
Thank you,

Hi,
When you are connecting your grid component it only taking static data, but while preview it is taking data from your data source. So I guess there is a possibility that your resulting data set contains a blank row (check your data from data source).
try to create one more data grid with the same data set, but fetch populate the data into different location. See if it is still giving you the same problem.
let us know if you already tried this before.
Good Luck.

OIM11gR2 DBAT User recon - custom UDF value not visible in User detail page

Hi,
I have configured DBAT connector for OIM11gR2 for user recon.
Have created and mapped few custom UDFs in the GTC.
User is created successfully in OIM, and has all the values correctly in USR table for all the custom UDFS.
But when i search a user in OIM, i can not see the value of custom UDF, even though it is in the database.
I have created and activated a sandbox and also added the custom UDF in the user details page using the Design option of ADF.
Is there something I am missing related to display of custom attribute and its value on the USer details page.
Kindly suggest.
Regards

Yes, your UDF should be available under Manage Users->UserVo1. It is working fine with our env. make sure you have the latest version of R2 release, because Beta release had an issue for same. You can create aonther UDF and and try gain.
verify same with below doc
http://docs.oracle.com/cd/E27559_01/doc.1112/e28183/oim_up.htm#BABEGECJ

Values not visible in DTN

Dear all,
I am not able to see the values in the DTN iview. I have set the level of navigation in TLN to 2 and starting level of DTNat 3.
However I do not see any values in the DTN. Please let me know wat could be the issue.
Regards,
Noufal

-> 1) Is it a fresh installation? Was it displaying before you have tried to make some changes in TLN and DTN iViews?
No it is not a fresh installation. It was getting displayed earlier and I don't think there was any change we did on the TLN or DTN. The preview of the DTN actually displays values in it. Just that the values do not get displayed when it is view on the pages
-> 2) Are you using FQDN (Fully qualified domain name) when accessing portal?
I tried accessing the portal in both ways with and without the FQDN
-> 3) Any Javascript errors in browser? Which browser and browser version you are using?
No Javascript errors

Screen-field value not visible

Hi All ,
I have added couple of fields to the standard transaction .Used a badi to achieve that.Now am able to send the values from one of the methods in the same badi to the custom field and a standard table is getting updated (which was created with append structure ).But am not able to see that value in the custom field after saving .
How come this is possible as the DB is getting updated .
Is there anything to be done in the module pool program or how ??
Regards ,
Hemanth Nugur .

hi .Am using this badi to add custom fields in trading contract(WB22) .WB2_ADDITIONAL_DATA.
Everything is working fine except am not able to see the value passed onto the field .I am passing the value from the method CHANGE_BEFORE_UPDATE .
Thanks

Lookup columns values not visible in Sharepoint designer

I had created a lookup column for a list.
I had generated a stp and created a new list in the new environment.
The lookup columns were not working, so i created new columns with the existing name.
But when i eid t aview in designer, i dont seem to find the clumn values.
Could you please help.

Hi,
It is known issue that on exporting list items, look up column values are lost.
For your issue, you can take steps as below to retain look up column values in export list template:
1. Browse to the source Web’s lookup list “Sub Category” and choose Modify settings and columns.
2. Copy the source lookup list GUID from the URL. It should be a sequence of numbers and letters similar to: %7BFFA47BF8%2D849C%2D4F20%2D9C50%2D173D2F5B6725%7D.
3. Browse to the destination Web’s lookup list and choose Modify settings and columns.
4. Copy the destination lookup list GUID from the URL. Similar as point 2.
5. Delete %2D from the string and replace with a dash sign (-). There should be no dash sign (-) at the start and the end. GUID should be in the following format: FA47BF8-849C-4F20-9C50-173D2F5B6725
6. Save the source Web’s list that contains a lookup column “Category” to the lookup list as a list template called category.stp.
7. Export the list template STP from the source list template gallery to the file system.
8. Rename the category.stp file to category.cab so Windows can open it.
9. Open the file, right click on the manifest.xml file and export it to the file system.
10. Edit the manifest.xml file; find the source Web’s lookup list GUID and replace it with the destination Web’s lookup list GUID.
11. Save the manifest.xml file.
12. Open a VS.NET command prompt.
13. Run the makecab command as: makecab manifest.xml category.stp
14. Import the new STP into the destination Web’s list template gallery. You will need to delete it if it has previously been imported.
Reference:
http://sharepointknowledgebase.blogspot.com/2012/09/retain-look-up-column-values-in-export.html#.VPg8d3kcQiQ
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Drop down values not visible

Hello All,
i have a drop down which is filled by the data from R/3. When i run my Web Dynpro appliocation, the drop down is getting populated, but when i run in the portal initially the drop down shrinks such that it dosent have any values but there are values in the drop down and upon refreshing the value are shown.
Like the same way the Road Map also initially it looks there is no steps available and upon refreshing the steps are visible
What could be the problem?
Any clues?
Thanks
Gopal.

Hi,
Thanks for updating. You can also consider rewarding points if my answer helped
Regards,
Harini S

Value not visible in combo box

Similar Messages

Maybe you are looking for