Formel Variable - how to fill with Customer Exit from control table

Hello Experts,
I have create in BEx-Analyser a formel Variable ZEXRATE1 filled through Customer Exit. In BW I had a "control tabel" with keyfigures.
In the query definition I have include 0FISCPER, 0FISCVARNT and 0VTYPE. This
are the keys which should give the values for the selectstatement to select my keyfigure from the "control table" to fill ZEXRATE1.
If it possible to do with Customer Exit (CMOD -> RSR00001 -> ZXRSRU01) or do I have to implement a Bapi. Perhaps someone can give me a code example.
Regards Dieter

Hi,
Code may look like this
WHEN 'ZEXRATE1'.
check i_step = 2.
    LOOP AT I_T_VAR_RANGE INTO L_S_RANGE.
      CASE L_S_RANGE-IOBJNM.
        WHEN 'ZFISCPER'. GV_ZFISCPER = L_S_RANGE-LOW.
        WHEN 'ZFISCVARNT'. GV_ZFISCVARNT = L_S_RANGE-LOW.
        WHEN 'ZVTYPE'. GV_ZVTYPE = L_S_RANGE-LOW.
      ENDCASE.
    ENDLOOP.
    SELECT SINGLE RATE into INTO GV_RATE
              FROM ZTABLE
              WHERE 0FISCPER = GV_ZFISCPER
              AND   0FISCVARNT = GV_ZFISCVARNT
             AND 0VTYPE = GV_ZVTYPE   .
Assumptions : ZTABLE name of control table
                      ZFISCPER name of variable represents fiscal period
                      'ZFISCVARNT' name of variable representing fiscal year variant
                      'ZVTYPE'. name of variable representing value type
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Similar Messages

Variable creation in bw with customer exit

hi experts,
how to create a variable in bw with customer exit?

Hi
Create a variable with Processing type as customer exit.
Then Go to Se38 and ZXRSRU01 program in change mode and there you write the necessary coding how your customer exit variable should process.
else you can access the include function via CMOD also with selecting the enhancement for reports.
Regards
RaM

Variable multiple single value filled with customer exit used in FOX form.

Hi guys, I definitly need your help in the following scenario:
I have variable (multiple single value) filled in a customer exit and use it in web template. There it is used in the drop down box for selecting a special date in the analysis item. And there comes the first question:Why the results from the customer exit are written in the way "date1; date2; date3" in one line? They should appear line by line in rows. How can I influence that? I tried both data binding types, "variable" and "characteristic".
Now a button raises a planning function with a fox formula which should write the selected date (from the drop down box) in a customer table using "call function".
I always get the error, that I need to restrict the variable to "single value". Why do I have to do that and if necessary how can I do that? Other planning functions without the fox formula also work properly with using the selection from the drop down box.
I appreciate you help.
Kind regards, Anja.

Hi Vamsi.,
Try this code.
WHEN 'PREVIOUS_YEAR_1'.
IF I_STEP = 2. "after the popup of user entry
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'ZCURRENT_YEAR_PERIOD'.
break-point.
IF SY-SUBRC EQ 0.
WA_YEAR = LOC_VAR_RANGE-LOW+0(4). "Year
WA_MONTH = LOC_VAR_RANGE-LOW+5(3). "Period
WA_YEAR = WA_YEAR - 1.
CONCATENATE WA_YEAR wa_month INTO WA_FISC_PERD .
CONCATENATE WA_YEAR WA_MONTH1 INTO L_S_RANGE-HIGH .
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
ENDIF.
ENDLOOP.
endif.
Assing points if it helps you.
-- Selva

SAP HR Infotype with Customized layout from Z table

hi Expert,
I'm developing customized infotype, IT9906 and a customized Table ZFDET. some ZFDET field will be show on the IT9906 infotype screen. refer to this picture for clearer view: [Infotype problem|http://2.bp.blogspot.com/-Kcun_tRx1OI/TgMOds-4bNI/AAAAAAAABrk/06xcVZx1Z-Y/s1600/Problem+Infotype.bmp]
what i'm problem is:
1) How to control customized field , example ZFDET-NP1 .... for mode DISPLAY or EDIt. my customized field still in Edit mode (white color) even user select the DISPLAY mode.
2) also some of my IT9906 component as shown on screen, also face same problem.
i'm tried to set Group as 006, but still not success. Please Advice. tq.

hi all, i managed solved the problem. i'm not realized there i'm not activated the this module:
module modify_subscreen at PBO on each screen.
once activated and made setting every Sub-screen Tab as group1 = 00f and group3=004, Text input as group1=006. then problem solved. tq.

How to make BEX Customer Exit Variable inactive through Customer Exit Code

Hi,
I had created two variables VAR1 and VAR2 as Customer Exit variables
If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
vice versa also required.
can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
Thanks in Advance.
Sunil.

What i want is not commenting the code
I want to make the BEX Variable as inactive by using the Customer Exit Code
EX : If value in VAR1 is entered then VAR2 should become automatically inactive.
If value in VAR2 is entered then VAR1 should become automatically inactive.
how can this be done
Thanks in advance.
Sunil

How to change a customer exit variable in columns

Hallo Experts,
i have a query with two columns. In the first column is a customer exit variable, who get filled with the actual calyear. In the second column is the same variable with an offset -1.
When i execute the query, in the first column i can see the year 2007 and in the second column i can see 2006. That´s ok.
Now i want to change the year (dynamically) in a filter 2007 in 2005. The result should be in the first column 2005 and in the second column 2004.
What can i do?

Hi Jens,
As I understand the scenario, you have two RKF or selections in column 1 and 2, one is restricted with variable ZYear, the other with the same variable, offset - 1 and variable ZYear provides current year.
I think there is no way to change years dynamically in a filter, but you could solve the issue by refreshing the query and overwrite default value provided by customer exit.
To achieve this, please change variable and check 'Ready for input' in change dialog..
If this shouldn't work, please let me know details a variable definition and customer exit.
Have a nice w/e
Joe

Characterstic variable with customer exit

Can u some bady help me.
How to express about Characterstic variable with customer exit
Edited by: chenna reddy on Aug 7, 2008 9:48 PM

Hi,
The variable may be personalized with some value.
To remove the personalization for a user:
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

HOW TO CREATE A CUSTOMER EXIT VARIABLE

<Moderator Message: use lower case letters next time, we don't want you to shout. --> see rules of engagement>
hi,
How to create a customer exit variable..!
in a query designer i have created the customer exit variable ,in the cmod i have created the project
for the exit rsap0001 and kept the break-point....but when i executing the query via BEX-Analyzer
where control not stoping in the break-point..
can any one help me ..what is the approch i need to do.because i new to BI..
Regards,
shahina.....!
Edited by: Siegfried Szameitat on Dec 17, 2008 10:37 AM

Hi Shahina,
1. Create formula variable var1 from to date using replacement path.
2. Create another formula variable var2 for current date using customer exit or you can use standard
formula variable for current date
3. Create calculate key figure ckf using var1 & var2.
ckf = var1 - var2.
Thanks == points
Regards
Sudheer
Edited by: SUDHEER on Dec 17, 2008 10:41 AM

How to Write a CUstomer Exit for a variable in BEx

Hi,
How to write a customer exit variable in bex Query designer
Do i need developers key for this (If so what type of key do i need so that i can ask basis tean to generate)
Info Object: ZEXP_DTE (Expiry Date)
Variable on ZEXP_DTE :
ZEDTE
Type: Customer Exit
Can any one please tell me how to write a code in CMOD from this (Step-by Step)
Expiry Date > Current Cal Day
As arun said
'l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.'
I want to insert the above code for the above customer exit but as i am new to BW as ABAP please explain me what are the steps involved in CMOD
Thanks

Hi,
To write customer exit for a variable, you require Access key.
Contact your BASIS to get that.
Access Key,BASIS?
To write Customer exit,
User Exits
User Exit for Variable
/thread/809285 [original link is broken]
Hope these helps u...
Regards,
KK.

Prob in text variable with customer exit

Hi to all
I am working in PA module in HR ,In my Report i have to count total number of trainee and lateral in given Date range that From date to To Date , Before that i have to calculate a Total Employee Strength before one day of From date , suppose user enter a 1st of April 2007 to 1st of jun 2007 , so Employee strength should be calculated on the 31march 2007, for that i have written custome exit , now i am getting a value also , for Display that date have a created a text variable with customer exit , but i am not able to get that date , it should be display strength as on 31march2007 , instead of it is displaying Strength as on 00.00.0000.I am giving a cod also
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = 'EB1A'.
append LS_Range to e_t_range.
WHEN 'ZPA_DATE'.
if i_step = 3.
READ TABLE I_T_VAR_RANGE INTO L_S_VAR_RANGE WITH KEY VNAM = 'ZPA_DATE'.
IF SY-SUBRC = 0.
ZTEST = L_S_VAR_RANGE-LOW.
ztest1 = ZTEST - 1.
export p = ztest1 to MEMORY ID 'VALUE'.
ENDIF.
endif.
WHEN 'ZFRMDAT'.
if i_step = 3.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest.
append LS_Range to e_t_range.
endif.
when 'ZPA_CDAT'.
if i_step = 3.
ztest1 = ztest - 1.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest1.
append LS_Range to e_t_range.
endif.
when 'ZPA_VAR3'.
if i_step = 3.
ztest1 = ztest - 1.
import p = ztest1 from memory id 'VALUE'.
concatenate ztest16(2) ztest14(2) ztest1+0(4) into date separated by '.'.
move date to temp.
move 'Hello' to temp.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = temp.
append LS_Range to e_t_range.
endif.
Please help me to come out
Thanks

Hi Stefania,
to me it looks like your local variable num_mese is not defined with the correct data type.
Try to change
if num_mese = 09 to if num_mese = '09',
same for 10 -> '10', 11 -> '11'.
If that does not help please let me know your coding where you define the type of num_mese (DATA statement).
Regards
Stephan

Formula Variable with customer exit

Hi,
can we use Formula variables with customer exit based on characteristics(ex Bill date)? if yes, can you guys help me on this.
Thanks
kri

Yes , you can use a formula variable with customer exit based on characteristics .
Depends on the requirement what you want to show in the formula variable ,
Eg : if you want to show the max fiscal year period , in that case :
create a new formula in the keyfigure section of your query , go to edit , you can see formula variable below the keyfigures ,
right click on the same and create new formula variable :
Write the code for the formula varible in the backend as we do for normal customer exit varaible :
for this e.g the code will be :
FORM get_variable_value
      tables E_T_RANGE      type RSR_T_RANGESID
      using I_VNAM          type RSZGLOBV-VNAM
            I_VARTYP        type RSZGLOBV-VARTYP
            I_IOBJNM        type RSZGLOBV-IOBJNM
            I_S_COB_PRO     type RSD_S_COB_PRO
            I_S_RKB1D       type RSR_S_RKB1D
            I_PERIV         type RRO01_S_RKB1F-PERIV
            I_T_VAR_RANGE   type RRS0_T_VAR_RANGE
            I_STEP          type I.
DATA L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA loc_var_range LIKE rrrangeexit.
Data : l_inPer TYPE string.
IF i_step = 1.
Select min( distinct FISCPER )
        from /BIC/A(DSO name)
        into l_minper .
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    l_s_range-low = l_minper .
    APPEND l_s_range TO e_t_range.
endif.
drag the formula variable in the new formula created and exexcute the query , you will be able to see the output .
This is just an example , your code will differ as per your requirement .

Formula date variable ,which is processing by 'Customer exit' with ready in

Hi ,
I need to create 1 variable which takes date from user and do some calculation.irrespective of any date char.
so I have created Formula date variable ,which is processing by 'Customer exit' with ready input .
But when selection screen pop up date formula variable comes with the format yyyymmdd.
but i need dd.mm.yyyy. i have checked my profile and it is dd.mm.yyyy.
Waitin for reply

Hi Babu
Did you get the answer to the query....if yes please drop me a mail on this as I have the same requirement and thanks in advance...
my id [email protected]
REgards
Amit

Variable with customer exit

Hello,
I have created a query with customer exit variable.this variable calculates cumulative month from the beginning of the year. this variable depends on another regular variable 0PCALMON (single value, mandatory). i also use this variable in the query to show the month itself.
the problem is as follow:
until yesterday the 0PCALMON variable pop up normally, but now the variable doesn't pop up at all!
Does anyone have an idea?
Thanks,
Maya

Hi,
The variable may be personalized with some value.
To remove the personalization for a user:
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

Hierarchy Node authorization with customer exit

Hi All,
I have created a hierarchy for an info-object A along with nodes test1 and test 2.node test1 consisit of value 10,20,30,40,50 and node test2 consist of value 60,70,80,90. .
1) I want that perticuler user should access perticuler node in hierarachy for that reason I have created a database table in which i have maintained the username and the values from the Infoobject A .I want to write a customer exit code in which user X can access node test1 and user Y can access node test2
but in database table i can not maintain the nodes i can only maintain the values from the nodes
so how can i restrict the user to perticuler node instead of values
The authorization values for the perticuler user will get filled by customer exit variable maintained in the authorization profile
can any body suggest me or send me example customer exit code for this scenario.
I really appreciate your thoughts on this issue.
Thanks,

Hi,
in addition to Anil's valid input, make sure that ZTEST is NOT ready for input. Indeed "ready for input" vars cannot be changed via customer exits.
hope this helps...
Olivier.

How to create a customer-exit to calculate a week from a date

Hi my Guru's,
I actually try to implement an Exit variable to calculate a week number from a characteristic date (0FINISHDATE) in my BEX report. Does anyone has an example of customer-exit which calculate a week number after giving a date in the popup.
What I really need is how to initialize the OFINISHDATE value in my Exit.
Any help will be appreciate,
Cheers,
MK2

Hi,
I donot know this following workaround works properly are not. we have to wait for Our BW gurus' suggestions.
1) Create a formula variable with 'Replacement path' as processing type on Characterstic 0FINISHDATE.
2) Create one more Formula variable with 'customer exit' as processing type .
3) In Cmod
DATA: l_s_range type rsr_s_rangesid.
DATA: datein like sy-datum. "la caractéristique date
DATA: date2 like SCAL-WEEK. " déclaration de Résultat
DATA : NUMB1(2) TYPE N.
CASE i_vnam.
when 'FORMULA_VARIABLE2'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'FORMULA_VARIABLE1'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW(8) = LOC_VAR_RANGE-LOW(8)
datein(8) = L_S_RANGE-LOW(8).
here we are finding the Week no user entered date.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = datein
IMPORTING
WEEK = date2.
numb1 = date2+4(2)
CLEAR L_S_RANGE.
L_S_RANGE-LOW = numb1.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDCASE.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Formel Variable - how to fill with Customer Exit from control table

Similar Messages

Maybe you are looking for