Variable diff while calculation and insertion

SELECT
Nvl(SUM(A.TOTALAMOUNT),0)
INTO vDollarValue
FROM ACCONTROL_FACT A
WHEN I RUN ABOVE Sql from sqlnavigator output is 406371536.4632
but when same variable value "vDollarValue" is inserted into table value get chage from 406371536.4632 to 406400000
in table datatype of field is float
and variable vDollarValue is declared as same type as declared in table using %type
why is this happening
please guide

Hi,
It seems you have declared the scale of the column as negative.
Can you post the following output.
desc table_name
select DollarValue from table_nameRegards
Anurag

Similar Messages

  • How do I create a 1d array that takes a single calculation and insert the result into the first row and then the next calculation the next time the loop passes that point and puts the results in thsecond row and so on until the loop is exited.

    The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
    The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
    pear to be working or at least I am not getting any indication on the inidcator.
    Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
    Attachments:
    regulation_tester_7_loops.vi ‏244 KB

    I didn't really have time to dig in and understand your program in depth,
    but I have a few tips for you that might things a bit easier:
    - You use local variables excessively which really complicates things. Try
    not to use them and it will make your life easier.
    - If you flowchart the design (very similar to a dataflow diagram, keep in
    mind!) you want to gather data, calculate a value from that data, store the
    calculation in an array, and loop while the time is in a certain range. So
    theres really not much need for a sequence as long as you get rid of the
    local variables (sequences also complicate things)
    - You loop again if timepassed+1 is still less than some constant. Rather
    than messing with locals it seems so much easier to use a shiftregister (if
    absolutely necessary) or in this case base it upon the number of iterations
    of the loop. In this case it looks like "time passed" is the same thing as
    the number of loop iterations, but I didn't check closely. There's an i
    terminal in your whileloop to read for the number of iterations.
    - After having simplified your design by eliminating unnecessary sequence
    and local variables, you should be able to draw out the labview diagram.
    Don't try to use the "insert into array" vis since theres no need. Each
    iteration of your loop calculates a number which goes into the next position
    of the array right? Pass your result outside the loop, and enable indexing
    on the terminal so Labview automatically generates the array for you. If
    your calculation is a function of previous data, then use a shift register
    to keep previous values around.
    I wish you luck. Post again if you have any questions. Without a more
    detailed understanding of your task at hand it's kind of hard to post actual
    code suggestions for you.
    -joey
    "nelsons" wrote in message
    news:[email protected]...
    > how do I create a 1d array that takes a single calculation and insert
    > the result into the first row and then the next calculation the next
    > time the loop passes that point and puts the results in thsecond row
    > and so on until the loop is exited.
    >
    > The attached file is work inprogress, with some dummy data sp that I
    > can test it out without having to connect to equipment.
    > The second tab is the one that I am having the problem with. the
    > output array from the replace element appears to be starting at the
    > index position of 1 rather than 0 but that is ok it is still show that
    > the new data is placed in incrementing element locations. However the
    > main array that I am trying to build that is suppose to take each new
    > calculation and place it in the next index(row) does not appear to be
    > working or at least I am not getting any indication on the inidcator.
    >
    > Basically what I am attempting to do is is gather some pulses from
    > adevice for a minute, place the results for a calculation, so that it
    > displays then do the same again the next minute, but put these result
    > in the next row and so on until the specifiied time has expired and
    > the loop exits. I need to have all results displayed and keep building
    > the array(display until, the end of the test)Eventually I will have to
    > include a min max section that displays the min and max values
    > calculated, but that should be easy with the min max function.Actually
    > I thought this should have been easy but, I gues I can not see the
    > forest through the trees. Can any one help to slear this up for me.

  • Problem while update and insert data in table

    Hi All,
    I have problem while save line data....
    I have an advance table.I take remove and duplicate line in message choice of advance table action layout.
    Also there is one temp table to save Po number data which is populated in advance table according to PO Number search.And In Temp table record number is column which use
    to insert and update data in temp table which mention in procedure
    Problem is that : When i Searched PO Number and duplicate line and save that record it insert a new line always and it insert record according to duplicate line no .It not update previous line,insert new line always according to duplicate line no.
    Please tell me what is solution?
    Thanks,
    Neil

    Hi,
    I am not cleared with your requirement.
    If possible send me the screenshots for the same.
    --Sushant
    [email protected]

  • PHP create array/variable for two dropdowns and insert into one column

    Hello,
    I have been trying for days to get this to work. Any help would be very appreciated.
    The dropdown code:
    <?php //Dropdowns for hours and minutes
    $hour = array (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16);
    $min = array (.00, .25, .50 ,.75);
    echo '<span class="red">Hours :</span><select name="hour">';
    foreach ($hour as $value1) {
    echo "<option value=\"$value1\">$value1</option>\n";
    echo '</select>';
    echo '<span class="red">Quarter Hours :</span><select name="min"';
    foreach ($min as $value2) {
    echo "<option value=\"$value2\">$value2</option>\n";
    echo '</select>';
    //Dropdowns for hours and minutes
    //Create variable to send to the time field using a hidden field
    function input_time($value1, $value2) {
    $time = count($value1 + $value2);
    return $input_time;
    ?>
    <input name="time" type="hidden" value="<?php echo "$input_time";?>" />
    The Schema:
    CREATE TABLE `ND_time_sheet` (
      `time_id` int(10) unsigned NOT NULL AUTO_INCREMENT,
      `day` varchar(10) NOT NULL DEFAULT '',
      `date` varchar(8) NOT NULL DEFAULT '',
      `project_id` varchar(8) DEFAULT NULL,
      `non_bill` tinytext,
      `staff_id` varchar(5) NOT NULL DEFAULT '',
      `time` decimal(3,2) unsigned zerofill DEFAULT NULL,
      `type` varchar(30) NOT NULL DEFAULT '',
      PRIMARY KEY (`time_id`)
    ) ENGINE=MyISAM DEFAULT CHARSET=latin1
    Thanks!

    9677670421 wrote:
    hi... i am trying to do the same but i am having the 2D array of data when first time if i clicked in table it should show the the first row values and if i again clicked same value should show in the second row and so on... but insted in my code if clicked (using insert into array ) at a time it is showing two rows of the data pl help me ..........
    This seems to be a different problem, so you should have started a new thread instead.
    Can you show us your code, tell us what you are clicking, tell us what you get and what you expect to get instead. Thanks.
    LabVIEW Champion . Do more with less code and in less time .

  • Receiver JDBC: Error while doing the Deleting and Inserting new records

    Hi All,
              I am doing Idoc to JDBC scenario. In this I am collecting & bundling different type of Idocs and then sending to the JDBC receiver. My requirement is to delete the existing records in the database and insert the new records. I have configures as mentioned in the link
    Re: Combining DELETE and INSERT statements in JDBC receiver
    In the above link its shows for single mapping. In my scenario I am using multi mapping for collecting idocs in BPM. If I configured for normal mapping then it is working fine(Deleting existing records and Inserting new record). Whenever I am using multi mapping then I am getting following error in the receiver JDBC communication channel u201CError while parsing or executing XML-SQL document: Error processing request in sax parser: No 'action' attribute found in XML document (attribute "action" missing or wrong XML structure)u201D . Can you please tell me what might be the problem.
    Thanks & Regards,
    T.Purushotham

    Hi !
    check this out:
    JDBC - No 'action' attribute found in XML document - error
    JDBC receiver adapter: No 'action' attribute found in XML document
    It appears that the inbound payload (the one that is going from XI to the JDBC adapter) does not have the requiered tag to specify which SQL action to execute in the receiver system. Maybe the multimapping is not creating the desired output message format.
    Regards,
    Matias.

  • I'm traveling to Europe (France and Lithuania) with my iPhone 5s.  I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (

    I'm traveling to Europe (France and Lithuania) with my iPhone 5s.  I would like to buy a local SIM card for use while in each country. Some sources (Verizon phone support) say this is as easy as buying the card and inserting in place in the slot. Others (Apple Genius) say I must completely restore the iPhone if I replace the sim card. Still others say I cannot use a local sim card. Can you help me find the correct information? Thanks for your help.

    That's a wonderful question, ssmiley67. The iPhone 5s comes unlock for international use. Many of our LTE devices are unlocked for international purposes and work upon inserting the international SIM in the device.
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • Reading special characters from a flat file and inserting into DB

    I'm reading data with special characters like . etc from a flat file , assigning the data to variable in my anonymous block and inserting into my DB. But the show up as inverted ? s. Any clues about how to do this?
    If i try to do the insert directly it works. It seems like the error occurs when reading this data into a variable
    thanks for the help
    Lalit Bhatia

    lalit, this is probably an character set problem, the default on Database creation tends to be 7bit Ascii which does not support special characters, it's been a while since I set up a db in this way, but you need to change settings in oracle.ini. The db will need to be restarted for this. Also, to check current settings try:
    select * from NLS_DATABASE_PARAMETERS
    You want an 8bit, unicode or multibyte character set. Sorry I cannot remember moer off the top of my head, try searching on NLS or character set

  • Removing rows and inserting new rows with new data in JTAble!!! (Plz. help)

    I have a problem, The scenario is that when I click any folder that si in my JTable's first row, the table is update by removing all the rows and showing only the contents of my selected folder. Right now it's not removing the rows and instead throwing exceptions. The code is attached. The methods to look are upDateTabel(...) and clearTableData(....), after clearing all my rows then I proceed on adding my data to the Jtable and inserting rows but it's not being done. May be I have a problem in my DefaultTableModel class. Please see the code below what I am doing wrong and how should I do it. Any help is appreciated.
    Thanks
    import javax.swing.*;
    import javax.swing.event.*;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.table.*;
    import javax.swing.border.*;
    import java.io.*;
    import java.text.SimpleDateFormat;
    import java.util.*;
    public class SimpleTable extends JPanel{
         /** Formats the date */
         protected SimpleDateFormat           formatter;
    /** variable to hold the date and time in a raw form for the directory*/
    protected long                          dateDirectory;
    /** holds the readable form converted date for the directories*/
    protected String                     dirDate;
    /** holds the readable form converted date for the files*/
    protected String                     fileDate;
    /** variable to hold the date and time in a raw form for the file*/
    protected long                          dateFile;
    /** holds the length of the file in bytes */
    protected long                         totalLen;
    /** convert the length to the wrapper class */
    protected Long                         longe;
    /** Vector to hold the sub directories */
    protected Vector                     subDir;
    /** holds the name of the selected directory */
    protected String                    dirNameHold;
    /** converting vector to an Array and store the values in this */
    protected File                     directoryArray[];
    /** hashtable to store the key-value pair */
    protected static Hashtable hashTable = new Hashtable();
    /** refer to the TableModel that is the default*/
    protected MyTableModel               tableModel;
    /** stores the path of the selected file */
    protected static String               fullPath;
    /** stores the currently selected file */
    protected static File selectedFilename;
    /** stores the extension of the selected file */
    protected static String           extension;
    protected int COLUMN_COUNT = 4;
         protected Vector data = new Vector( 0, 1 );
         protected final JTable table;
    /** holds the names of the columns */
    protected final String columnNames[] = {"Name", "Size", "Type", "Modified"};
    public SimpleTable(File directoryArray[])
              this.setLayout(new BorderLayout());
              this.setBorder( BorderFactory.createEmptyBorder( 0, 0, 0, 0 ) );
              (SimpleTable.hashTable).clear();
              formatter = new SimpleDateFormat("mm/dd/yyyy hh:mm aaa");
              for(int k = 0; k < directoryArray.length; k++)
                   if(directoryArray[k].isDirectory())
                        dateDirectory = directoryArray[k].lastModified();
                        dirDate = formatter.format(new java.util.Date(dateDirectory));
                        data.addElement( new MyObj( directoryArray[k].getName(), "", "File Folder", "" + dirDate ) );
                        (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);                    
                   else if(directoryArray[k].isFile())
                        dateDirectory = directoryArray[k].lastModified();
                        fileDate = formatter.format(new java.util.Date(dateDirectory));
                        totalLen = directoryArray[k].length();
                        longe = new Long(totalLen);
                        data.addElement( new MyObj( directoryArray[k].getName(), longe + " Bytes", "", "" + fileDate ) );
                        (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);
    tableModel = new MyTableModel();
              table = new JTable( tableModel );
              table.getTableHeader().setReorderingAllowed(false);
              table.setRowSelectionAllowed(false);
              table.setBorder( BorderFactory.createEmptyBorder( 0, 0, 0, 0 ) );
              table.setShowHorizontalLines(false);
              table.setShowVerticalLines(false);
              table.addMouseListener(new MouseAdapter()
    public void mouseReleased(MouseEvent e)
         Object eventTarget = e.getSource();
                        if( eventTarget == table )
                             upDateTable(table);
                             table.tableChanged( new javax.swing.event.TableModelEvent(tableModel) ) ;
              DefaultTableCellRenderer D_headerRenderer = (DefaultTableCellRenderer ) table.getTableHeader().getDefaultRenderer();
              table.getColumnModel().getColumn(0).setHeaderRenderer(D_headerRenderer );
              ((DefaultTableCellRenderer)D_headerRenderer).setToolTipText("File and Folder in the Current Folder");
    //Create the scroll pane and add the table to it.
    JScrollPane scrollPane = new JScrollPane(table);
    //Add the scroll pane to this window.
    this.add(scrollPane, BorderLayout.CENTER);
    * Searches the Hashtable and returns the path of the folder or the value.
    public File findPath(String value)
         return (File)((SimpleTable.hashTable).get(value));
    * This clears the previous data in the JTable
    public void clearTableData(JTable table)
         for(int row = 0; row < table.getRowCount() ; row++)
                   //for (int col = 0; col < table.getColumnCount() ; col++)
                        tableModel.deleteSelections( row );
              tableModel.fireTableStructureChanged();
              tableModel.fireTableRowsDeleted(0,table.getRowCount());
              //table.getModel().fireTableChanged(new TableModelEvent(table.getModel()));
    private void upDateTable(JTable table)
    if((table.getSelectedColumn() == 0) && ((table.getColumnName(0)).equals(columnNames[0])))
         dirNameHold =(String) table.getValueAt(table.getSelectedRow(),table.getSelectedColumn());
                   File argument = findPath(dirNameHold);
                   if(argument.isFile())
                        CMRDialog.fileNameTextField.setText(argument.getName());
                        try
                             fullPath = argument.getCanonicalPath();                          
                             selectedFilename = argument.getCanonicalFile();                          
    CMRDialog.filtersComboBox.removeAllItems();
                             extension = fullPath.substring(fullPath.lastIndexOf('.'));
                             CMRDialog.filtersComboBox.addItem("( " + extension + " )" + " File");
                        catch(IOException e)
                             System.out.println("THE ERROR IS " + e);
                        return;
                   else if(argument.isDirectory())
                        String path = argument.getName();
                             //find the system dependent file separator
                             //String fileSeparator = System.getProperty("file.separator");
                        CMRDialog.driveComboBox.addItem(" " + path);
              subDir = Search.subDirs(argument);
              /**TBD:- needs a method to convert the vector to an array and return the array */
              directoryArray = new File[subDir.size()];
                   int indexCount = 0;
                   /** TBD:- This is inefficient way of converting a vector to an array */               
                   Iterator e = subDir.iterator();               
                   while( e.hasNext() )
                        directoryArray[indexCount] = (File)e.next();
                        indexCount++;
              /** now calls this method and clears the previous data */
              clearTableData(table);     
                   (SimpleTable.hashTable).clear();
                   //data = new Object[this.getRowTotal(directoryArray)][this.getColumnTotal()];
                   formatter = new SimpleDateFormat("mm/dd/yyyy hh:mm aaa");
                   for(int k = 0; k < directoryArray.length; k++)
                        if(directoryArray[k].isDirectory())
                             dateDirectory = directoryArray[k].lastModified();
                             dirDate = formatter.format(new java.util.Date(dateDirectory));
                             data.addElement( new MyObj( directoryArray[k].getName(), "", "File Folder", "" + dirDate ) );
                             (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);                    
                        else if(directoryArray[k].isFile())
                             dateDirectory = directoryArray[k].lastModified();
                             fileDate = formatter.format(new java.util.Date(dateDirectory));
                             totalLen = directoryArray[k].length();
                             longe = new Long(totalLen);
                             data.addElement( new MyObj( directoryArray[k].getName(), longe + " Bytes", "", "" + fileDate ) );
                             (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);
              // tableModel.fireTableDataChanged();          
              // tableModel.fireTableRowsInserted(0,1);
              table.revalidate();
              table.validate();               
    class MyTableModel extends DefaultTableModel
              int totalRows;
              int totalCols;
              public MyTableModel()
                   super();
                   setColumnIdentifiers (columnNames);
                   this.totalRows = data.size();
                   this.totalCols = columnNames.length;
              // this will return the row count of your table
              public int getRowCount()
                   return totalRows;
              // this return the column count of your table
              public int getColumnCount()
                   return totalCols;
              // this return the data for each cell in your table
              public Object getValueAt(int row, int col)
                   MyObj obj = (MyObj)data.elementAt( row );
                   if( obj != null )
                        if( col == 0 ) return( obj.first );
                        else if( col == 1 ) return( obj.last );
                        else if( col == 2 ) return( obj.third );
                        else if( col == 3 ) return( obj.fourth );
                        else return( "" );
                   return "";
              // if you want your table to be editable then return true
              public boolean isCellEditable(int row, int col)
                   return false;
              // if your table is editable edit the data vector here and
              // call table.tableChanged(...)
              public void setValueAt(Object value, int row, int col)
              protected void deleteSelections (int rows)
                   try
                        removeRow(rows);
                   catch(ArrayIndexOutOfBoundsException e)
                        System.out.println("The error in the row index " + rows);
                   fireTableDataChanged() ;
    class MyObj
              String first;
              String last;
              String third;
              String fourth;
              public MyObj( String f, String l, String t, String fo )
                   this.first = f;
                   this.last = l;
                   this.third = t;
                   this.fourth = fo;
    #####################################

    The following code works fine but it doesn't show me the new updated date in my JTable. I tried to print the values that I am getting and it does give the values on the prompt but doesn't show me on the JTable only first two are shown and the rest of the table is filled with the same values. I don't know what's going on and am tired of this TableModel thing so pla. take a time to give me some suggestions. Thanks
    import javax.swing.*;
    import javax.swing.event.*;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.table.*;
    import javax.swing.border.*;
    import java.io.*;
    import java.text.SimpleDateFormat;
    import java.util.*;
    public class SimpleTable extends JPanel {
         /** Formats the date */
         protected SimpleDateFormat           formatter;
    /** two-dimensional array to hold the information for each column */
    protected Object                     data[][];
    /** variable to hold the date and time in a raw form for the directory*/
    protected long                          dateDirectory;
    /** holds the readable form converted date for the directories*/
    protected String                     dirDate;
    /** holds the readable form converted date for the files*/
    protected String                     fileDate;
    /** variable to hold the date and time in a raw form for the file*/
    protected long                          dateFile;
    /** holds the length of the file in bytes */
    protected long                         totalLen;
    /** convert the length to the wrapper class */
    protected Long                         longe;
    /** Vector to hold the sub directories */
    protected Vector                     subDir;
    /** holds the name of the selected directory */
    protected String                    dirNameHold;
    /** converting vector to an Array and store the values in this */
    protected File                     directoryArray[];
    /** hashtable to store the key-value pair */
    protected static Hashtable hashTable = new Hashtable();
    /** refer to the TableModel that is the default*/
    protected DefaultTableModel      model;
    /** stores the path of the selected file */
    protected static String               fullPath;
    /** stores the currently selected file */
    protected static File selectedFilename;
    /** stores the extension of the selected file */
    protected static String           extension;
    protected Vector                     m = new Vector(0,1);
    /** holds the names of the columns */
    protected final String columnNames[] = {"Name", "Size", "Type", "Modified"};
    public SimpleTable(File directoryArray[])
              this.setLayout(new BorderLayout());
              this.setBorder( BorderFactory.createEmptyBorder( 0, 0, 0, 0 ) );
              (SimpleTable.hashTable).clear();
              data = new Object[this.getRowTotal(directoryArray)][this.getColumnTotal()];
              formatter = new SimpleDateFormat("mm/dd/yyyy hh:mm aaa");
              for(int k = 0; k < directoryArray.length; k++)
                   if(directoryArray[k].isDirectory())
                        data[k][0] = directoryArray[k].getName();
                        data[k][2] = "File Folder";
                        dateDirectory = directoryArray[k].lastModified();
                        dirDate = formatter.format(new java.util.Date(dateDirectory));
                        data[k][3] = dirDate;
                        (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);                    
                   else if(directoryArray[k].isFile())
                        data[k][0] = directoryArray[k].getName();
                        totalLen = directoryArray[k].length();
                        longe = new Long(totalLen);
                        data[k][1] = longe + " Bytes";
                        dateFile = directoryArray[k].lastModified();
                        fileDate = formatter.format(new java.util.Date(dateFile));
                        data[k][3] = fileDate;
                        (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);
    model = new DefaultTableModel();
    model.addTableModelListener( new TableModelListener(){
              public void tableChanged( javax.swing.event.TableModelEvent e )
                   System.out.println("************ I am inside the table changed method ********" );
              final JTable table = new JTable(model);
              table.getTableHeader().setReorderingAllowed(false);
              table.setRowSelectionAllowed(false);
              table.setBorder( BorderFactory.createEmptyBorder( 0, 0, 0, 0 ) );
              table.setShowHorizontalLines(false);
              table.setShowVerticalLines(false);
              table.addMouseListener(new MouseAdapter()
    /* public void mousePressed(MouseEvent e)
    //System.out.println("The clicked component is " + table.rowAtPoint(e.getPoint()) + "AND the number of clicks is " + e.getClickCount());
    /* if(e.getClickCount() >= 2 &&
    (table.getSelectedColumn() == 0) &&
    ((table.getColumnName(0)).equals(columnNames[0])))
         //System.out.println("The clicked component is " + table.rowAtPoint(e.getPoint()) + "AND the number of clicks is " + e.getClickCount());
         upDateTable(table);
    public void mouseReleased(MouseEvent e)
    //System.out.println("The clicked component is " + table.rowAtPoint(e.getPoint()) + "AND the number of clicks is " + e.getClickCount());
    /* if(e.getClickCount() >= 2 &&
    (table.getSelectedColumn() == 0) &&
    ((table.getColumnName(0)).equals(columnNames[0]))) */
         //System.out.println("The clicked component is " + table.rowAtPoint(e.getPoint()) + "AND the number of clicks is " + e.getClickCount());
         upDateTable(table);
              /** set the columns */
              for(int c = 0; c < columnNames.length; c++)
                   model.addColumn(columnNames[c]);
              /** set the rows */
              for(int r = 0; r < data.length; r++)
                   model.addRow(data[r]);
              DefaultTableCellRenderer D_headerRenderer = (DefaultTableCellRenderer ) table.getTableHeader().getDefaultRenderer();
              table.getColumnModel().getColumn(0).setHeaderRenderer(D_headerRenderer );
              ((DefaultTableCellRenderer)D_headerRenderer).setToolTipText("File and Folder in the Current Folder");
    //Create the scroll pane and add the table to it.
    JScrollPane scrollPane = new JScrollPane(table);
    //Add the scroll pane to this window.
    this.add(scrollPane, BorderLayout.CENTER);
    * Returns the number of columns
    public int getColumnTotal()
         return columnNames.length;
    * Returns the number of rows
    public int getRowTotal(Object directoryArray[])
         return directoryArray.length;
    private void upDateTable(JTable table)
    if((table.getSelectedColumn() == 0) && ((table.getColumnName(0)).equals(columnNames[0])))
         dirNameHold =(String) table.getValueAt(table.getSelectedRow(),table.getSelectedColumn());
                   File argument = findPath(dirNameHold);
                   if(argument.isFile())
                        CMRDialog.fileNameTextField.setText(argument.getName());
                        try
                             fullPath = argument.getCanonicalPath();                          
                             selectedFilename = argument.getCanonicalFile();                          
    CMRDialog.filtersComboBox.removeAllItems();
                             extension = fullPath.substring(fullPath.lastIndexOf('.'));
                             CMRDialog.filtersComboBox.addItem("( " + extension + " )" + " File");
                        catch(IOException e)
                             System.out.println("THE ERROR IS " + e);
                        return;
                   else if(argument.isDirectory())
                        String path = argument.getName();
                             //find the system dependent file separator
                             //String fileSeparator = System.getProperty("file.separator");
                        CMRDialog.driveComboBox.addItem(" " + path);
              subDir = Search.subDirs(argument);
              /**TBD:- needs a method to convert the vector to an array and return the array */
              directoryArray = new File[subDir.size()];
                   int indexCount = 0;
                   /** TBD:- This is inefficient way of converting a vector to an array */               
                   Iterator e = subDir.iterator();               
                   while( e.hasNext() )
                        directoryArray[indexCount] = (File)e.next();
                        indexCount++;
              /** now calls this method and clears the previous data */
              clearTableData(table);     
                   (SimpleTable.hashTable).clear();
                   data = new Object[this.getRowTotal(directoryArray)][this.getColumnTotal()];
                   formatter = new SimpleDateFormat("mm/dd/yyyy hh:mm aaa");
                   m.clear();
                   data = null;
                   data = new Object[this.getRowTotal(directoryArray)][this.getColumnTotal()];
                   for(int k = 0; k < directoryArray.length; k++)
                        if(directoryArray[k].isDirectory())
                        System.out.println("Inside the if part");
                             data[k][0] = directoryArray[k].getName();
                             table.setValueAt(directoryArray[k].getName(),k,0);
                             //model.fireTableCellUpdated(k,0);
                             data[k][2] = "File Folder";
                             table.setValueAt("File Folder",k,2);
                             //model.fireTableCellUpdated(k,2);
                             dateDirectory = directoryArray[k].lastModified();
                             dirDate = formatter.format(new java.util.Date(dateDirectory));
                             data[k][3] = dirDate;
                             table.setValueAt(dirDate,k,3);
                             //model.fireTableCellUpdated(k,3);
                             (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);
                             m.add(data);
                             model.addRow(m);
                             model.fireTableDataChanged();                              
                        else if(directoryArray[k].isFile())
                   System.out.println("******* Inside the else part *******");
                             data[k][0] = directoryArray[k].getName();
                   System.out.println("The Name is == " + data[k][0]);
                             table.setValueAt(directoryArray[k].getName(),k,0);
                   System.out.println("The table cell value of the name is == " + table.getValueAt(k,0));
                             //model.fireTableCellUpdated(k,0);
                             totalLen = directoryArray[k].length();
                             longe = new Long(totalLen);
                             data[k][1] = longe + " Bytes";
                   System.out.println("The length == " + data[k][1]);
                             table.setValueAt(longe + " Bytes",k,1);
                   System.out.println("The table cell value of the length is == " + table.getValueAt(k,1));
                             //model.fireTableCellUpdated(k,0);
                             dateFile = directoryArray[k].lastModified();
                             fileDate = formatter.format(new java.util.Date(dateFile));
                             data[k][3] = fileDate;
                   System.out.println("The modified date == " + data[k][3]);
                             table.setValueAt(fileDate,k,3);
                   System.out.println("The table cell value of the name is == " + table.getValueAt(k,3));
                             //model.fireTableCellUpdated(k,0);
                             (SimpleTable.hashTable).put(directoryArray[k].getName(), directoryArray[k]);                    }
                             m.add(data);
                             model.addRow(m);
                             model.fireTableDataChanged();     
              // model.fireTableDataChanged();          
              // model.fireTableRowsInserted(0,1);
              table.revalidate();
              table.validate();               
         else
    * Searches the Hashtable and returns the path of the folder or the value.
    public File findPath(String value)
         return (File)((SimpleTable.hashTable).get(value));
    * This clears the previous data in the JTable
    public void clearTableData(JTable table)
         for(int row = 0; row < table.getRowCount() ; row++)
                   for (int col = 0; col < table.getColumnCount() ; col++)
                        table.setValueAt(null, row , col);
              model.fireTableStructureChanged();
    ###

  • Summarizing variables field with calculations

    I have three fields which I need to summarize, as a group summary, then a grand total. The first field, Total_STD_Labor_Cost, is in a sub-report, which is a calculation and stored in a "Receipts" variable field. I then multiply Receipts*STDCost=Total_STD_Labor_Cost. This results, I can pass to the main report, but can not summarize it, regardless where it is placed in the main report, report footer or any group footer. The second and third fields are in the main report and are calculated using the "Receipts" variable field and cost fields.  I can not summarize these two field either, I suspect because they include the "Receipts" variable field is why I am not getting any results. Running totals do not seem to work or apply here. So I am looking to either capture the sums of the fields by group and again in the grand total. Using the insert summary feature does not give the sum option.
    Any thoughts would be truly appreciated.
    eadeane7

    OK, I created the part variables, reset, calc and display.(3 sets for three  different totals. Using an example from Spiceworks.com. 
    Formula structure
    -the first formula for calculation should be written as such;
    whileprintingrecords;
    shared numbervar InsSum;
    InsSum:= InsSum + [formula to be totaled]
    this formula should be placed in the same section as the field to be summarized.
    -the second formula for reset should be written;
    whileprintingrecords;
    shared numbervar InsSum;
    InsSum:=0
    this formula should be placed in the section proceding the section containing the field to be summarized.
    -the third display formula should be written;
    whileprintingrecords;
    shared numbervar InsSum;
    InsSum
    and this formula should be placed where you were wanting the summary to appear.
    So in my crystal report there are three groups.  Group footer #1 has a subreport in to pull the product line name in.
    Within that group I need to total std labor cost, lowlevel laborcost and highlevel labor cost.
    Group #2 is by bomitem, which is a part number
    Group #3 is for linenumber which refers to a subreport that has no bearing on the totals
    I am trying to achieve. 
    Using the first set of fields, PlineTotalSTDLabCost_Calc, PlineTotalSTDLabCost_Display and PlineTotalSTDLabCost_Reset,, where should
    These fields be place to return the results I am looking for base on what I have explained.
    Formula for PlineTotalSTDLabCost_Calc:
    Whileprintingrecords;
    Shared Numbervar PlineLaborStd;
    PlineLaborStd:= PlineLaborStd + ({@Total_std_Lab_cost}
    Formula for PlineTotalSTDLabCost_Display:
    Whileprintingrecords;
    Shared Numbervar PlineLaborStd;
    PlineLaborStd
    Formula for PlineTotalSTDLabcost_Reset:
    Whileprintingrecords;
    Shared Numbervar PlineLaborStd;
    PlineLaborStd:=0
      Base on what I have explained and the screenshots, where should these field be placed in order to get totals by product line (Group #1) and grand totals in the report footer?

  • Diff in OPU3 and OPU5 T-codes - urgent

    Dear All,
    Can you please tell me the diff bet OPU3 and OPU5 t codes..........as there is common setting for  SCHEDULING CONTROL FOR DETAIL SCHEDULING section.........i.e for Scheduling type and Start in Past..........if this setting in both T-code are made different , then system will consider which one while scheduling..............waiting for your experts opinion on urgent basic..........
    Best Regards
    Sharad

    hi Pradeep,
    Thanks for reply..........Actually I want schedule now planned orders........I am using planning strategy 40 for hight level FERTt material and 70 for HALB lower lever assy........with mixed indicator 1..........so that with mixed indicator I am trying to get fixed pegging relationship between finshed product and assy planned order..........But eariler my settings were to start in past say 5 days for order in OPU5........with backward scheduling.......but because of this I am start dates for planned orders were getting in past...............Then I removed setting 5 days to 0 days for "Start in past" so that system will go backward for scheduling and then start forward automatically if start date is going in past.........and it should moved all order with their pegging relationship.................This is the reason I raised question saying difference in both code........as I had not changed setting in OPU3............
                          But my problem is that system is doing scheduling and when dates are calculated by backwards and determined dates are going backwards i.e. in past then scheduling is going again forward and this is I want......but start date for order assy level all orders are from today's date........But actually I want to shift all assy level orders with pegging relationship............which is not happening.........pl guide if have any idea............thanks in advance........
    Best Regards
    Sharad

  • [Forum FAQ] How do I restore the CDC enabled database backups (FULL + DIFF) while maintaining the CDC integrity

    Question
    Background: When restoring Full + DIFF backups of a Change Data Capture (CDC) enabled database to a different SQL server, the CDC integrity is not being maintained. We did RESTORE the databases with the KEEP_CDC option.
    How do I successfully restore the CDC enabled database backups (FULL + DIFF) while maintaining the CDC integrity?
    Answer
    When restoring a CDC enabled database on a different machine that is running SQL Server, besides using use the KEEP_CDC option to retain all the CDC metadata, you also need to add Capture and Cleanup jobs. 
    In addition, as you want to restore FULL + DIFF backups of a CDC enabled database, you need to note that the KEEP_CDC and NoRecovery options are incompatible. Use the KEEP_CDC option only when you are completing the recovery. I made a test to display
    the whole process that how to restore the CDC enabled database backups (FULL + DIFF) on a different machine.
    Create a database named ’CDCTest’ in SQL Server 2012, then enable the CDC feature and take full+ differential backups of the database.
    -- Create database CDCTest
    CREATE DATABASE [CDCTest] ON  PRIMARY
    ( NAME = N'CDCTest ', FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\ CDCTest.mdf' , SIZE = 5120KB ,
    MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
     LOG ON
    ( NAME = N'CDCTest _log', FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\ CDCTest _log.LDF' , SIZE = 3840KB ,
    MAXSIZE = 2048GB , FILEGROWTH = 10%)
    GO
    use CDCTest;
    go
    -- creating table
    create table Customer
    custID int constraint PK_Employee primary key Identity(1,1)
    ,custName varchar(20)
    --Enabling CDC on CDCTest database
    USE CDCTest
    GO
    EXEC sys.sp_cdc_enable_db
    --Enabling CDC on Customer table
    USE CDCTest
    GO
    EXEC sys.sp_cdc_enable_table
    @source_schema = N'dbo',
    @source_name = N'Customer',
    @role_name = NULL
    GO
    --Inserting values in customer table
    insert into Customer values('Mike'),('Linda')
    -- Querying CDC table to get the changes
    select * from cdc.dbo_customer_CT
    --Taking full database backup
    backup database CDCTest to disk = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Backup\ CDCTest.bak'
    insert into Customer values('David'),('Jane')
    -- Querying CDC table to get the changes
    select * from cdc.dbo_customer_CT
    --Taking differential database backup
    BACKUP DATABASE CDCTest TO DISK = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Backup\ CDCTestdif.bak' WITH DIFFERENTIAL
    GO
    Restore Full backup of the ‘CDCTest’ database with using KEEP_CDC option in a different server that is running SQL Server 2014.
    Use master
    Go
    --restore full database backup
    restore database CDCTest from disk = 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Backup\CDCTest.bak' with keep_cdc
    Restore Diff backup of the ‘CDCTest’ database.
    Restore Database CDCTest From Disk = 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Backup\CDCTest.bak'
        With Move 'CDCTest' To 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\CDCTest.mdf',
            Move 'CDCTest _log' To 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\CDCTest _log.LDF',
            Replace,
            NoRecovery;
    Go
    --restore differential database backup
    restore database CDCTest from disk = 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Backup\CDCTestdif.bak' with keep_cdc
    Add the Capture and Cleanup jobs in the CDCTest database.
    --add the Capture and Cleanup jobs
    Use CDCTest
    exec sys.sp_cdc_add_job 'capture'
    GO
    exec sys.sp_cdc_add_job 'cleanup'
    GO
    insert into Customer values('TEST'),('TEST1')
    -- Querying CDC table to get the changes
    select * from cdc.dbo_customer_CT
    Reference
    Track Data Changes (SQL Server)
    Restoring a SQL Server database that uses Change Data Capture
    Applies to
    SQL Server 2014
    SQL Server 2012
    SQL Server 2008 R2
    SQL Server 2008
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    Question
    Background: When restoring Full + DIFF backups of a Change Data Capture (CDC) enabled database to a different SQL server, the CDC integrity is not being maintained. We did RESTORE the databases with the KEEP_CDC option.
    How do I successfully restore the CDC enabled database backups (FULL + DIFF) while maintaining the CDC integrity?
    Answer
    When restoring a CDC enabled database on a different machine that is running SQL Server, besides using use the KEEP_CDC option to retain all the CDC metadata, you also need to add Capture and Cleanup jobs. 
    In addition, as you want to restore FULL + DIFF backups of a CDC enabled database, you need to note that the KEEP_CDC and NoRecovery options are incompatible. Use the KEEP_CDC option only when you are completing the recovery. I made a test to display
    the whole process that how to restore the CDC enabled database backups (FULL + DIFF) on a different machine.
    Create a database named ’CDCTest’ in SQL Server 2012, then enable the CDC feature and take full+ differential backups of the database.
    -- Create database CDCTest
    CREATE DATABASE [CDCTest] ON  PRIMARY
    ( NAME = N'CDCTest ', FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\ CDCTest.mdf' , SIZE = 5120KB ,
    MAXSIZE = UNLIMITED, FILEGROWTH = 1024KB )
     LOG ON
    ( NAME = N'CDCTest _log', FILENAME = N'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\ CDCTest _log.LDF' , SIZE = 3840KB ,
    MAXSIZE = 2048GB , FILEGROWTH = 10%)
    GO
    use CDCTest;
    go
    -- creating table
    create table Customer
    custID int constraint PK_Employee primary key Identity(1,1)
    ,custName varchar(20)
    --Enabling CDC on CDCTest database
    USE CDCTest
    GO
    EXEC sys.sp_cdc_enable_db
    --Enabling CDC on Customer table
    USE CDCTest
    GO
    EXEC sys.sp_cdc_enable_table
    @source_schema = N'dbo',
    @source_name = N'Customer',
    @role_name = NULL
    GO
    --Inserting values in customer table
    insert into Customer values('Mike'),('Linda')
    -- Querying CDC table to get the changes
    select * from cdc.dbo_customer_CT
    --Taking full database backup
    backup database CDCTest to disk = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Backup\ CDCTest.bak'
    insert into Customer values('David'),('Jane')
    -- Querying CDC table to get the changes
    select * from cdc.dbo_customer_CT
    --Taking differential database backup
    BACKUP DATABASE CDCTest TO DISK = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Backup\ CDCTestdif.bak' WITH DIFFERENTIAL
    GO
    Restore Full backup of the ‘CDCTest’ database with using KEEP_CDC option in a different server that is running SQL Server 2014.
    Use master
    Go
    --restore full database backup
    restore database CDCTest from disk = 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Backup\CDCTest.bak' with keep_cdc
    Restore Diff backup of the ‘CDCTest’ database.
    Restore Database CDCTest From Disk = 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Backup\CDCTest.bak'
        With Move 'CDCTest' To 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\CDCTest.mdf',
            Move 'CDCTest _log' To 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\CDCTest _log.LDF',
            Replace,
            NoRecovery;
    Go
    --restore differential database backup
    restore database CDCTest from disk = 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Backup\CDCTestdif.bak' with keep_cdc
    Add the Capture and Cleanup jobs in the CDCTest database.
    --add the Capture and Cleanup jobs
    Use CDCTest
    exec sys.sp_cdc_add_job 'capture'
    GO
    exec sys.sp_cdc_add_job 'cleanup'
    GO
    insert into Customer values('TEST'),('TEST1')
    -- Querying CDC table to get the changes
    select * from cdc.dbo_customer_CT
    Reference
    Track Data Changes (SQL Server)
    Restoring a SQL Server database that uses Change Data Capture
    Applies to
    SQL Server 2014
    SQL Server 2012
    SQL Server 2008 R2
    SQL Server 2008
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

  • Problem with overwrite and insert keyboard commands

    I'm a new user, switching from FCP. I edited one project successfully with no trouble a couple of weeks ago. Now I'm in a second project and having a weird difficulty. Using a pretty new Mac 8 core tower.
    The insert and overlay keyboard commands (comma and period keys) don't work. They still work in the old project but not this one. If I start a new sequence and copy my timeline to it, the commands will work for awhile but ONLY with video, not with the audio tracks. Drag and drop works fine but that really slows me down.
    The clips I'm using are all the same format (H.264 from Canon 5DII and some still photos) as the first project. Only difference in this project is lots of chroma keying and some resizing of background still photos. Nothing unrendered.
    I started a new project just now and imported the problem project into it, started a new sequence, copied old sequence, and I get the same problem. I can drop in video with a keyboard command but not audio. Earlier it was not even doing video. Yesterday when I'd start a new sequence and do the same thing, it would give me video on the keyboard command but then eventually that would stop and it would do nothing. At one point the cursor would move over the width of the clip, as if it had been dropped into the timeline, but then that stopped as well.
    I've trashed preferences and that didn't work. I did that according to a procedure I found online. It said open up PP while holding down the Shift and Option keys. I did that twice. Nothing.
    To summarize: Keyboard commands for overwrite and insert edit do not work in this project but do in an older project.
    Any ideas?
    Thanks.
    Bill Pryor
    [email protected]

    Well, thanks to an email from another person who was having the same problem, it's all solved not.
    Operator error. Dang. Who knew--in FCP you select a track by clicking on the V or A buttons to the far left. In Premiere Pro you have to make sure BOTH the far left button and the one to the right that says Video 1, Audio 1, etc. are also clicked. They BOTH have to be light gray. In my first project, everything was properly activated but in the next project apparently they were not and that carried over to succeeding projects (even though I didn't change anything...at least consciously).
    So all as well now. No glitch, no bug. Just good ol' fashioned operator error. I will wear the dunce hat today.

  • Bind Variable in SELECT statement and get the value  in PL/SQL block

    Hi All,
    I would like  pass bind variable in SELECT statement and get the value of the column in Dynamic SQL
    Please seee below
    I want to get the below value
    Expected result:
    select  distinct empno ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT'  and pr.empno =100
    100, HR
    select  distinct ename ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT'  and pr.empno =100
    TEST, HR
    select  distinct loc ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT'  and pr.empno =100
    NYC, HR
    Using the below block I am getting column names only not the value of the column. I need to pass that value(TEST,NYC..) into l_col_val variable
    Please suggest
    ----- TABLE LIST
    CREATE TABLE EMP(
    EMPNO NUMBER,
    ENAME VARCHAR2(255),
    DEPT VARCHAR2(255),
    LOC    VARCHAR2(255)
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (100,'TEST','HR','NYC');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (200,'TEST1','IT','NYC');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (300,'TEST2','MR','NYC');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (400,'TEST3','HR','DTR');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (500,'TEST4','HR','DAL');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (600,'TEST5','IT','ATL');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (700,'TEST6','IT','BOS');
    INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (800,'TEST7','HR','NYC');
    COMMIT;
    CREATE TABLE COLUMNAMES(
    COLUMNAME VARCHAR2(255)
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('EMPNO');
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('ENAME');
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('DEPT');
    INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('LOC');
    COMMIT;
    CREATE TABLE DEPT(
    DEPT VARCHAR2(255),
    DNAME VARCHAR2(255)
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('HR','HUMAN RESOURCE');
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('MR','MARKETING');
    INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
    COMMIT;
    PL/SQL BLOCK
    DECLARE
      TYPE EMPCurTyp  IS REF CURSOR;
      v_EMP_cursor    EMPCurTyp;
      l_col_val           EMP.ENAME%type;
      l_ENAME_val       EMP.ENAME%type;
    l_col_ddl varchar2(4000);
    l_col_name varchar2(60);
    l_tab_name varchar2(60);
    l_empno number ;
    b_l_col_name VARCHAR2(255);
    b_l_empno NUMBER;
    begin
    for rec00 in (
    select EMPNO aa from  EMP
    loop
    l_empno := rec00.aa;
    for rec in (select COLUMNAME as column_name  from  columnames
    loop
    l_col_name := rec.column_name;
    begin
      l_col_val :=null;
       l_col_ddl := 'select  distinct :b_l_col_name ,pr.dept ' ||'  from emp pr, dept ps where   ps.dept like ''%IT'' '||' and pr.empno =:b_l_empno';
       dbms_output.put_line('DDL ...'||l_col_ddl);
       OPEN v_EMP_cursor FOR l_col_ddl USING l_col_name, l_empno;
    LOOP
        l_col_val :=null;
        FETCH v_EMP_cursor INTO l_col_val,l_ename_val;
        EXIT WHEN v_EMP_cursor%NOTFOUND;
          dbms_output.put_line('l_col_name='||l_col_name ||'  empno ='||l_empno);
       END LOOP;
    CLOSE v_EMP_cursor;
    END;
    END LOOP;
    END LOOP;
    END;

    user1758353 wrote:
    Thanks Billy, Would you be able to suggest any other faster method to load the data into table. Thanks,
    As Mark responded - it all depends on the actual data to load, structure and source/origin. On my busiest database, I am loading on average 30,000 rows every second from data in external files.
    However, the data structures are just that - structured. Logical.
    Having a data structure with 100's of fields (columns in a SQL table), raise all kinds of questions about how sane that structure is, and what impact it will have on a physical data model implementation.
    There is a gross misunderstanding by many when it comes to performance and scalability. The prime factor that determines performance is not how well you code, what tools/language you use, the h/w your c ode runs on, or anything like that. The prime factor that determines perform is the design of the data model - as it determines the complexity/ease to use the data model, and the amount of I/O (the slowest of all db operations) needed to effectively use the data model.

  • Excise Invoice:difference in duty calculation while calculating ECS& SECS

    Hi All,
    There is a difference in duty calculations in excise Invoice, (1) which is generated automatically while creating billing doc manually ) &  (2) generating billing doc & excise invoice in PRG.In PRG Billing doc is getting generated by BAPI 'BAPI_BILLINGDOC_CREATEMULTIPLE" and Excise invoice by BDC for t-code J1IIN.
    What is the difference?
    While calculating ECS duty & SECS duty , AED amt should be excluded. Accordingly billing document pricing procedure was set and was working properly in both the above cases(1),(2).
    But standard Excise Invoice tax procedure TAXINN,which is assgined for  Excise Invoice there is difference in calculations manually & by PRG using BDC
    Thanks in advance
    Rayudu

    Hi Mahendra,
    I understand that while you are trying to post an Export invoice, you need to print excise invoice which is a legal requirement.  But, in SAP the same should not be posted in any of the excise tables.  I think there should be a small settings from SD side to restrict generating any accounting documents for the Export Excise Invoice.  Can you please speak to the SD consultant.
    Hope this helps.
    Vikas.

  • How to use direct select and insert or load to speedup the process instead of cursur

    Hi friends,
    I have stored procedure .In SP i am using cursur to load data from Parent to several child table.
    I have attached the script with this message.
    And my problem is how to use direct select and insert or load to speedup the process instead of cursur.
    Can any one please suggest me how to change this scripts pls.
    USE [IconicMarketing]
    GO
    /****** Object: StoredProcedure [dbo].[SP_DMS_INVENTORY] Script Date: 3/6/2015 3:34:03 PM ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    -- =============================================
    -- Author: <ARUN,NAGARAJ>
    -- Create date: <11/21/2014>
    -- Description: <STORED PROCEDURE FOR DMS_INVENTORY>
    -- =============================================
    ALTER PROCEDURE [dbo].[SP_DMS_INVENTORY]
    @Specific_Date varchar(20) ,
    @DealerNum Varchar(6),
    @Date_Daily varchar(50)
    AS
    BEGIN
    SET NOCOUNT ON;
    --==========================================================================
    -- INVENTORY_CURSUR
    --==========================================================================
    DECLARE
    @FileType varchar(50),
    @ACDealerID varchar(50),
    @ClientDealerID varchar(50),
    @DMSType varchar(50),
    @StockNumber varchar(50),
    @InventoryDate datetime ,
    @StockType varchar(100),
    @DMSStatus varchar(50),
    @InvoicePrice numeric(18, 2),
    @CostPack varchar(50),
    @SalesCost numeric(18, 2),
    @HoldbackAmount numeric(18, 2),
    @ListPrice numeric(18, 2),
    @MSRP varchar(max),
    @LotLocation varchar(50),
    @TagLine varchar(max),
    @Certification varchar(max),
    @CertificationNumber varchar(max),
    @VehicleVIN varchar(50),
    @VehicleYear bigint ,
    @VehicleMake varchar(50),
    @VehicleModel varchar(50),
    @VehicleModelCode varchar(50),
    @VehicleTrim varchar(50),
    @VehicleSubTrimLevel varchar(max),
    @Classification varchar(max),
    @TypeCode varchar(100),
    @VehicleMileage bigint ,
    @EngineCylinderCount varchar(10) ,
    @TransmissionType varchar(50),
    @VehicleExteriorColor varchar(50),
    @VehicleInteriorColor varchar(50),
    @CreatedDate datetime ,
    @LastModifiedDate datetime ,
    @ModifiedFlag varchar(max),
    @InteriorColorCode varchar(50),
    @ExteriorColorCode varchar(50),
    @PackageCode varchar(50),
    @CodedCost varchar(50),
    @Air varchar(100),
    @OrderType varchar(max),
    @AgeDays bigint ,
    @OutstandingRO varchar(50),
    @DlrAccessoryRetail varchar(50),
    @DlrAccessoryCost varchar(max),
    @DlrAccessoryDesc varchar(max),
    @ModelDesc varchar(50),
    @Memo1 varchar(1000),
    @Memo2 varchar(max),
    @Weight varchar(max),
    @FloorPlan numeric(18, 2),
    @Purchaser varchar(max),
    @PurchasedFrom varchar(max),
    @InternetPrice varchar(50),
    @InventoryAcctDollar numeric(18, 2),
    @VehicleType varchar(50),
    @DealerAccessoryCode varchar(50),
    @AllInventoryAcctDollar numeric(18, 2),
    @BestPrice varchar(50),
    @InStock bigint ,
    @AccountingMake varchar(50),
    @GasDiesel varchar(max),
    @BookValue varchar(10),
    @FactoryAccessoryDescription varchar(max),
    @TotalReturn varchar(10),
    @TotalCost varchar(10),
    @SS varchar(max),
    @VehicleBody varchar(max),
    @StandardEquipment varchar(max),
    @Account varchar(max),
    @CalculatedPrice varchar(10),
    @OriginalCost varchar(10),
    @AccessoryCore varchar(10),
    @OtherDollar varchar(10),
    @PrimaryBookValue varchar(10),
    @AmountDue varchar(10),
    @LicenseFee varchar(10),
    @ICompany varchar(max),
    @InvenAcct varchar(max),
    @Field23 varchar(max),
    @Field24 varchar(max),
    @SalesCode bigint,
    @BaseRetail varchar(10),
    @BaseInvAmt varchar(10),
    @CommPrice varchar(10),
    @Price1 varchar(10),
    @Price2 varchar(10),
    @StickerPrice varchar(10),
    @TotInvAmt varchar(10),
    @OptRetail varchar(max),
    @OptInvAmt varchar(10),
    @OptCost varchar(10),
    @Options1 varchar(max),
    @Category varchar(max),
    @Description varchar(max),
    @Engine varchar(max),
    @ModelType varchar(max),
    @FTCode varchar(max),
    @Wholesale varchar(max),
    @Retail varchar(max),
    @Draft varchar(max),
    @myerror varchar(500),
    @Inventoryid int,
    @errornumber int,
    @errorseverity varchar(500),
    @errortable varchar(50),
    @errorstate int,
    @errorprocedure varchar(500),
    @errorline varchar(50),
    @errormessage varchar(1000),
    @Invt_Id int,
    @flatfile_createddate datetime,
    @FtpDate date,
    @Inv_cur varchar(1000),
    @S_Year varchar(4),
    @S_Month varchar(2),
    @S_Date varchar(2),
    @Date_Specfic varchar(50),
    @Param_list nvarchar(max),
    @Daily_Date Varchar(50);
    --====================================================================================
    --DECLARE CURSUR FOR SPECIFIC DATE (OR) DEALER-ID WITH SPECIFIC DATE (OR) CURRENT DATE
    --====================================================================================
    set @Date_Specfic = Substring(@Specific_Date,1,4) +'-'+Substring(@Specific_Date,5,2)+'-'+Substring(@Specific_Date,7,2);
    set @Daily_Date = SUBSTRING(@Date_Daily,14,4) + '-' + SUBSTRING(@Date_Daily,18,2)+ '-' + SUBSTRING(@date_Daily,20,2)
    IF @Daily_Date IS NOT NULL
    BEGIN
    Delete From [dbo].[DMS_INVENTORY_DETAILS]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
    Delete From [dbo].[DMS_INVENTORY_AMOUNT]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
    Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
    Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
    Delete From [dbo].[DMS_INVENTORY_VEHICLE]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
    Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
    Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
    Delete From [dbo].[DMS_INVENTORY]
    Where ID in(select ID from [dbo].[DMS_INVENTORY] where CONVERT (date,FtpDate)=CONVERT (date,GETDATE()));
    DECLARE Inventory_Cursor CURSOR FOR
    SELECT * from [dbo].[FLATFILE_INVENTORY] where
    CONVERT (date,flatfile_createddate) = CONVERT (date,GETDATE()) order by flatfile_createddate;
    END
    Else
    BEGIN
    if (@Date_Specfic IS NOT NULL AND @DealerNum != '?????')
    BEGIN
    Delete From [dbo].[DMS_INVENTORY_DETAILS]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
    Delete From [dbo].[DMS_INVENTORY_AMOUNT]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
    Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
    Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
    Delete From [dbo].[DMS_INVENTORY_VEHICLE]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
    Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
    Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
    Delete From [dbo].[DMS_INVENTORY]
    Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic AND DMSDealerID='ACTEST' + @DealerNum);
    DECLARE Inventory_Cursor CURSOR FOR
    SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic AND ACDealerID='ACTEST' + @DealerNum;
    END
    ELSE
    BEGIN
    Delete From [dbo].[DMS_INVENTORY_DETAILS]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
    Delete From [dbo].[DMS_INVENTORY_AMOUNT]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
    Delete From [dbo].[ICONIC_INVENTORY_VEHICLE]
    Where DMSInventoryVehicleID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
    Delete From [dbo].[DMS_INVENTORY_VEHICLE]
    Where DMSInventoryID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
    Delete From [dbo].[ICONIC_EQUITY_INVENTORY_COMPARE]
    Where InventoryVehicleId in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
    Delete From [dbo].[DMS_INVENTORY]
    Where ID in(select ID from [dbo].[DMS_INVENTORY] where FtpDate=@Date_Specfic);
    DECLARE Inventory_Cursor CURSOR FOR
    SELECT * from [dbo].[FLATFILE_INVENTORY] where FtpDate=@Date_Specfic;
    END
    END
    OPEN Inventory_Cursor
    FETCH NEXT FROM Inventory_Cursor
    INTO
    @FileType ,
    @ACDealerID ,
    @ClientDealerID ,
    @DMSType ,
    @StockNumber ,
    @InventoryDate ,
    @StockType ,
    @DMSStatus ,
    @InvoicePrice ,
    @CostPack ,
    @SalesCost ,
    @HoldbackAmount ,
    @ListPrice ,
    @MSRP ,
    @LotLocation ,
    @TagLine ,
    @Certification ,
    @CertificationNumber ,
    @VehicleVIN ,
    @VehicleYear ,
    @VehicleMake ,
    @VehicleModel ,
    @VehicleModelCode ,
    @VehicleTrim ,
    @VehicleSubTrimLevel ,
    @Classification ,
    @TypeCode ,
    @VehicleMileage ,
    @EngineCylinderCount ,
    @TransmissionType ,
    @VehicleExteriorColor ,
    @VehicleInteriorColor ,
    @CreatedDate ,
    @LastModifiedDate ,
    @ModifiedFlag ,
    @InteriorColorCode ,
    @ExteriorColorCode ,
    @PackageCode ,
    @CodedCost ,
    @Air ,
    @OrderType ,
    @AgeDays ,
    @OutstandingRO ,
    @DlrAccessoryRetail ,
    @DlrAccessoryCost ,
    @DlrAccessoryDesc ,
    @ModelDesc ,
    @Memo1 ,
    @Memo2 ,
    @Weight ,
    @FloorPlan ,
    @Purchaser ,
    @PurchasedFrom ,
    @InternetPrice ,
    @InventoryAcctDollar ,
    @VehicleType ,
    @DealerAccessoryCode ,
    @AllInventoryAcctDollar ,
    @BestPrice ,
    @InStock ,
    @AccountingMake ,
    @GasDiesel ,
    @BookValue ,
    @FactoryAccessoryDescription ,
    @TotalReturn ,
    @TotalCost ,
    @SS ,
    @VehicleBody ,
    @StandardEquipment ,
    @Account ,
    @CalculatedPrice ,
    @OriginalCost ,
    @AccessoryCore ,
    @OtherDollar ,
    @PrimaryBookValue ,
    @AmountDue ,
    @LicenseFee ,
    @ICompany ,
    @InvenAcct ,
    @Field23 ,
    @Field24 ,
    @SalesCode ,
    @BaseRetail ,
    @BaseInvAmt ,
    @CommPrice ,
    @Price1 ,
    @Price2 ,
    @StickerPrice ,
    @TotInvAmt ,
    @OptRetail ,
    @OptInvAmt ,
    @OptCost ,
    @Options1 ,
    @Category ,
    @Description ,
    @Engine ,
    @ModelType ,
    @FTCode ,
    @Wholesale ,
    @Retail ,
    @Draft ,
    @flatfile_createddate,
    @FtpDate;
    WHILE @@FETCH_STATUS = 0
    BEGIN
    --==========================================================================
    -- INSERT INTO INVENTORY (PARENT TABLE)
    --==========================================================================
    BEGIN TRY
    INSERT INTO [dbo].[DMS_INVENTORY]
    DMSDealerID,
    StockNumber,
    DMSType,
    InventoryDate,
    FtpDate
    VALUES (@ClientDealerID,@StockNumber,@DMSType,@InventoryDate,@FtpDate);
    END TRY
    BEGIN CATCH
    SELECT
    @errornumber = ERROR_NUMBER(),
    @errorseverity = ERROR_SEVERITY(),
    @errortable = 'DMS_INVENTORY',
    @errorstate = ERROR_STATE(),
    @errorprocedure = ERROR_PROCEDURE(),
    @errorline = ERROR_LINE(),
    @errormessage = ERROR_MESSAGE();
    --==========================================================================
    -- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
    --==========================================================================
    EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
    @SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
    @VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
    @CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
    @DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
    @InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
    @FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
    @OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
    @Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
    @ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
    END CATCH
    -- PRINT @errornumber;
    -- PRINT @errorseverity;
    -- PRINT @errortable;
    -- PRINT @errorprocedure;
    -- PRINT @errorline;
    -- PRINT @errormessage;
    -- PRINT @errorstate;
    set @myerror = @@ERROR;
    -- This -- PRINT statement -- PRINTs 'Error = 0' because
    -- @@ERROR is reset in the IF statement above.
    -- PRINT N'Error = ' + @myerror;
    set @Inventoryid = scope_identity();
    -- PRINT @Inventoryid;
    --==========================================================================
    -- INSERT INTO DMS_INVENTORY_DETAILS (CHILD TABLE)
    --==========================================================================
    BEGIN TRY
    INSERT INTO [dbo].[DMS_INVENTORY_DETAILS]
    DMSInventoryID,
    StockType,
    DMSStatus,
    LotLocation,
    TagLine,
    Certification,
    CertificationNumber,
    CreatedDate,
    LastModifiedDate,
    ModifiedFlag,
    PackageCode,
    OrderType,
    AgeDays,
    OutstandingRO,
    Memo1,
    Memo2,
    Purchaser,
    PurchasedFrom,
    DealerAccessoryCode,
    InStock,
    AccountingMake,
    SS,
    Account,
    AccessoryCore,
    ICompany,
    InvenAcct,
    Field23,
    Field24,
    SalesCode,
    Draft,
    FTCode,
    FtpDate
    VALUES (
    @InventoryID,
    @StockType,
    @DMSStatus,
    @LotLocation,
    @TagLine,
    @Certification,
    @CertificationNumber,
    @CreatedDate,
    @LastModifiedDate,
    @ModifiedFlag,
    @PackageCode,
    @OrderType,
    @AgeDays,
    @OutstandingRO,
    @Memo1,
    @Memo2,
    @Purchaser,
    @PurchasedFrom,
    @DealerAccessoryCode,
    @InStock,
    @AccountingMake,
    @SS,
    @Account,
    @AccessoryCore,
    @ICompany,
    @InvenAcct,
    @Field23,
    @Field24,
    @SalesCode,
    @Draft,
    @FTCode,
    @FtpDate
    END TRY
    BEGIN CATCH
    SELECT
    @errornumber = ERROR_NUMBER(),
    @errorseverity = ERROR_SEVERITY(),
    @errorstate = ERROR_STATE(),
    @errortable = 'DMS_INVENTORY_DETAILS',
    @errorprocedure = ERROR_PROCEDURE(),
    @errorline = ERROR_LINE(),
    @errormessage = ERROR_MESSAGE();
    --==========================================================================
    -- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
    --==========================================================================
    EXECUTE [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
    @SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
    @VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
    @CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
    @DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
    @InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
    @FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
    @OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
    @Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
    @ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
    END CATCH
    --==========================================================================
    -- INSERT INTO DMS_INVENTORY_AMOUNT (CHILD TABLE)
    --==========================================================================
    BEGIN TRY
    INSERT INTO [dbo].[DMS_INVENTORY_AMOUNT]
    DMSInventoryID,
    AllInventoryAcctDollar,
    OtherDollar,
    PrimaryBookValue,
    AmountDue,
    LicenseFee,
    CalculatedPrice,
    OriginalCost,
    BookValue,
    TotalReturn,
    TotalCost,
    DlrAccessoryRetail,
    DlrAccessoryCost,
    DlrAccessoryDesc,
    InternetPrice,
    InventoryAcctDollar,
    BestPrice,
    Weight,
    FloorPlan,
    CodedCost,
    InvoicePrice,
    CostPack,
    SalesCost,
    HoldbackAmount,
    ListPrice,
    MSRP,
    BaseRetail,
    BaseInvAmt,
    CommPrice,
    Price1,
    Price2,
    StickerPrice,
    TotInvAmt,
    OptRetail,
    OptInvAmt,
    OptCost,
    Wholesale,
    Retail,
    FtpDate
    VALUES (
    @InventoryID,
    @AllInventoryAcctDollar,
    @OtherDollar,
    @PrimaryBookValue,
    @AmountDue,
    @LicenseFee,
    @CalculatedPrice,
    @OriginalCost,
    @BookValue,
    @TotalReturn,
    @TotalCost,
    @DlrAccessoryRetail,
    @DlrAccessoryCost,
    @DlrAccessoryDesc,
    @InternetPrice,
    @InventoryAcctDollar,
    @BestPrice,
    @Weight,
    @FloorPlan,
    @CodedCost,
    @InvoicePrice,
    @CostPack,
    @SalesCost,
    @HoldbackAmount,
    @ListPrice,
    @MSRP,
    @BaseRetail,
    @BaseInvAmt,
    @CommPrice,
    @Price1,
    @Price2,
    @StickerPrice,
    @TotInvAmt,
    @OptRetail,
    @OptInvAmt,
    @OptCost,
    @Wholesale,
    @Retail,
    @FtpDate
    END TRY
    BEGIN CATCH
    SELECT
    @errornumber = ERROR_NUMBER(),
    @errorseverity = ERROR_SEVERITY(),
    @errortable = 'DMS_INVENTORY_AMOUNT',
    @errorstate = ERROR_STATE(),
    @errorprocedure = ERROR_PROCEDURE(),
    @errorline = ERROR_LINE(),
    @errormessage = ERROR_MESSAGE();
    --==========================================================================
    -- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
    --==========================================================================
    EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
    @SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
    @VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
    @CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
    @DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
    @InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
    @FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
    @OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
    @Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
    @ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
    END CATCH
    --==========================================================================
    -- INSERT INTO DMS_INVENTORY_VEHICLE (CHILD TABLE)
    --==========================================================================
    BEGIN TRY
    INSERT INTO [dbo].[DMS_INVENTORY_VEHICLE]
    DMSInventoryID,
    InteriorColorCode,
    ExteriorColorCode,
    Air,
    ModelDesc,
    VehicleType,
    VehicleVIN,
    VehicleYear,
    VehicleMake,
    VehicleModel,
    VehicleModelCode,
    VehicleTrim,
    VehicleSubTrimLevel,
    Classification,
    TypeCode,
    VehicleMileage,
    FtpDate,
    EngineCylinderCount
    VALUES (
    @InventoryID,
    @InteriorColorCode,
    @ExteriorColorCode,
    @Air,
    @ModelDesc,
    @VehicleType,
    @VehicleVIN,
    @VehicleYear,
    @VehicleMake,
    @VehicleModel,
    @VehicleModelCode,
    @VehicleTrim,
    @VehicleSubTrimLevel,
    @Classification,
    @TypeCode,
    @VehicleMileage,
    @FtpDate,
    @EngineCylinderCount
    END TRY
    BEGIN CATCH
    SELECT
    @errornumber = ERROR_NUMBER(),
    @errorseverity = ERROR_SEVERITY(),
    @errortable = 'DMS_INVENTORY_VEHICLE',
    @errorstate = ERROR_STATE(),
    @errorprocedure = ERROR_PROCEDURE(),
    @errorline = ERROR_LINE(),
    @errormessage = ERROR_MESSAGE();
    --==========================================================================
    -- INSERT ERRORS INTO DMSLOG_INVENTORY_ERROR
    --==========================================================================
    EXEC [SP_DMS_INVENTORY_ERROR] @FileType,@ACDealerID,@ClientDealerID,@DMSType,@StockNumber,@InventoryDate,@StockType,@DMSStatus,@InvoicePrice,@CostPack,
    @SalesCost,@HoldbackAmount,@ListPrice,@MSRP,@LotLocation,@TagLine,@Certification,@CertificationNumber,@VehicleVIN,@VehicleYear,@VehicleMake,@VehicleModel,@VehicleModelCode,
    @VehicleTrim,@VehicleSubTrimLevel,@Classification,@TypeCode,@VehicleMileage,@EngineCylinderCount,@TransmissionType,@VehicleExteriorColor,@VehicleInteriorColor,
    @CreatedDate,@LastModifiedDate,@ModifiedFlag,@InteriorColorCode,@ExteriorColorCode,@PackageCode,@CodedCost,@Air,@OrderType,@AgeDays,@OutstandingRO,
    @DlrAccessoryRetail,@DlrAccessoryCost,@DlrAccessoryDesc,@ModelDesc,@Memo1,@Memo2,@Weight,@FloorPlan,@Purchaser,@PurchasedFrom,@InternetPrice,
    @InventoryAcctDollar,@VehicleType,@DealerAccessoryCode,@AllInventoryAcctDollar,@BestPrice,@InStock,@AccountingMake,@GasDiesel,@BookValue,
    @FactoryAccessoryDescription,@TotalReturn,@TotalCost,@SS,@VehicleBody,@StandardEquipment,@Account,@CalculatedPrice,@OriginalCost,@AccessoryCore,
    @OtherDollar,@PrimaryBookValue,@AmountDue,@LicenseFee,@ICompany,@InvenAcct,@Field23,@Field24,@SalesCode,@BaseRetail,@BaseInvAmt,@CommPrice,@Price1,
    @Price2,@StickerPrice,@TotInvAmt,@OptRetail,@OptInvAmt,@OptCost,@Options1,@Category,@Description,@Engine,@ModelType,@FTCode,@Wholesale,@Retail,@Draft,
    @ERRORNUMBER,@ERRORSEVERITY,@ERRORTABLE,@ERRORSTATE,@ERRORPROCEDURE,@ERRORLINE,@errormessage,@FtpDate
    END CATCH
    --==========================================================================
    -- MOVE CURSUR TO NEXT RECORD
    --==========================================================================
    FETCH NEXT FROM Inventory_Cursor
    INTO @FileType ,
    @ACDealerID ,
    @ClientDealerID ,
    @DMSType ,
    @StockNumber ,
    @InventoryDate ,
    @StockType ,
    @DMSStatus ,
    @InvoicePrice ,
    @CostPack ,
    @SalesCost ,
    @HoldbackAmount ,
    @ListPrice ,
    @MSRP ,
    @LotLocation ,
    @TagLine ,
    @Certification ,
    @CertificationNumber ,
    @VehicleVIN ,
    @VehicleYear ,
    @VehicleMake ,
    @VehicleModel ,
    @VehicleModelCode ,
    @VehicleTrim ,
    @VehicleSubTrimLevel ,
    @Classification ,
    @TypeCode ,
    @VehicleMileage ,
    @EngineCylinderCount ,
    @TransmissionType ,
    @VehicleExteriorColor ,
    @VehicleInteriorColor ,
    @CreatedDate ,
    @LastModifiedDate ,
    @ModifiedFlag ,
    @InteriorColorCode ,
    @ExteriorColorCode ,
    @PackageCode ,
    @CodedCost ,
    @Air ,
    @OrderType ,
    @AgeDays ,
    @OutstandingRO ,
    @DlrAccessoryRetail ,
    @DlrAccessoryCost ,
    @DlrAccessoryDesc ,
    @ModelDesc ,
    @Memo1 ,
    @Memo2 ,
    @Weight ,
    @FloorPlan ,
    @Purchaser ,
    @PurchasedFrom ,
    @InternetPrice ,
    @InventoryAcctDollar ,
    @VehicleType ,
    @DealerAccessoryCode ,
    @AllInventoryAcctDollar ,
    @BestPrice ,
    @InStock ,
    @AccountingMake ,
    @GasDiesel ,
    @BookValue ,
    @FactoryAccessoryDescription ,
    @TotalReturn ,
    @TotalCost ,
    @SS ,
    @VehicleBody ,
    @StandardEquipment ,
    @Account ,
    @CalculatedPrice ,
    @OriginalCost ,
    @AccessoryCore ,
    @OtherDollar ,
    @PrimaryBookValue ,
    @AmountDue ,
    @LicenseFee ,
    @ICompany ,
    @InvenAcct ,
    @Field23 ,
    @Field24 ,
    @SalesCode ,
    @BaseRetail ,
    @BaseInvAmt ,
    @CommPrice ,
    @Price1 ,
    @Price2 ,
    @StickerPrice ,
    @TotInvAmt ,
    @OptRetail ,
    @OptInvAmt ,
    @OptCost ,
    @Options1 ,
    @Category ,
    @Description ,
    @Engine ,
    @ModelType ,
    @FTCode ,
    @Wholesale ,
    @Retail ,
    @Draft ,
    @flatfile_createddate,
    @FtpDate;
    END
    CLOSE Inventory_Cursor;
    DEALLOCATE Inventory_Cursor;
    SET ANSI_PADDING OFF
    END
    Arunraj Kumar

    Thank you.
    And another question if the data is already there in the child table if i try to load alone it must delete the old data in the child tablee and need to get load the new data and 
    How to do this ?
    Arunraj Kumar
    You can do that with an IF EXISTS condition
    IF EXISTS (SELECT 1
    FROM YourChildTable c
    INNER JOIn @temptable t
    ON c.Bkey1 = t.Bkey1
    AND c.Bkey2 = t.Bkey2
    DELETE t
    FROM YourChildTable c
    INNER JOIn @temptable t
    ON c.Bkey1 = t.Bkey1
    AND c.Bkey2 = t.Bkey2
    INSERT INTO YourChildTable
    where Bkey1,Bkey2 etc forms the business key of the table
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

Maybe you are looking for

  • Just a comment/question on OS upgrades (VZW/Sprint).

    First, the question: I upgraded the 8330 Curve OS to 4.5 on a friend's device (VZW).  No problem, everything seems to work as near as he can tell, but for some reason it is very laggy...I searched and couldn't find a specific answer to the question.

  • In camera raw how large should I open my raw file before converting it to a TIF file?

    in camera raw how large should I open my raw file before converting it to a TIF file---2736 x 3648 (10.0 MP), 3072x4096 (12.7 MP) or 3840x5120? (19.7 MP).  I want a sharp TIF file.   I'm shooting with an Olympus E-510, 10.0 MP camera? thanks - Ken [e

  • Special GL indicator on SDI nvoice

    Dear Gurus I'm trying to use a Special GL indicator on a SD Invoice to divert the customer Reconciliation account to another one. This is an easy to do thing on a standard FI posting, but can I do this through my SD invoice ? Thanks (points will be g

  • SCCM 2012 R2 5.0.7958.1000

    I am standing up a new site but my Management point is at 0 bytes.  I applied the CU 1 update and tried to apply the update 2 but it says it does not apply to the version of SCCM I have installed.  I am getting the following error: Site Component Man

  • RAC 10.2.0.4, event gc cr block busy & log file switch

    hello everybody, i would like to know if there is any dependencies between gc cr block busy and log switch in the one node of the rac cluster. i had a select and its completion time lasted 12 secs instead of 1, the start time of the select is the sta