Variant tcode insertion in T code OMBA

Hi filks!!
In t. code OMBA where MIGO transaction are assigned to accounting document type, I want to insert my newly created T code variant.
Please provide step to follow.
I would be thankful.
Best regards,

Hi,
I don't know if I understand your requirement.
If you want to add new variant TCODe like MIGO_TR and assign Accounting document, I would follow this way:
1. try to add entry to table T158 (in SE16)
2. use related entry (for existing TCode) as a reference for fields entry.
3. save and test if it works
hope it helps.
regards,
wojciech

Similar Messages

Transaction variant Tcode called in ZPROGRAM

Hi Folks,
I have created transaction variant for t code MM01.
And created a transaction code for this transaction variant using SE93.
ZMM01_MAT is transaction variant t code.
Now I am trying to call this transaction variant t code(ZMM01_MAT) from other program to fill the next internal material number and pass it to ZMM01_MAT(passing material no from program to screen).
When I select a select views and click on “sales:sale org. data1” view, it is not prompting the screen to enter plant/Sales org/Distribution channel values (it will prompt screen in MM01 and ZMM01_MAT transaction codes).
Below is the coded in ZPROGRAM where ZMM01_MAT is calling
SET PARAMETER ID 'MXX' FIELD 'X'.
SET PARAMETER ID 'MAT' FIELD lv_matnr.
CALL TRANSACTION 'ZMM01_MAT'.
please help us on this.
Sri

Hi,
I don't know if I understand your requirement.
If you want to add new variant TCODe like MIGO_TR and assign Accounting document, I would follow this way:
1. try to add entry to table T158 (in SE16)
2. use related entry (for existing TCode) as a reference for fields entry.
3. save and test if it works
hope it helps.
regards,
wojciech

Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

Is it normal that every time when I switch off my Iphone 5s and then I turn it on again I have to insert my pin code?

That's what I was suspecting they were asking , but wanted to make sure.

I dw file.dwt files may insert server side code supposed all pages depended are in the same code eg

I dw file.dwt (exact like this ext) files may insert server side code supposed all pages depended are in the same code eg cfml?

I'm sorry, but your English is pretty difficult for me to figure. I'm assuming your asking how to have a Dreameraver template support ColdFusion. It hat is what you are asking, the template file extension should be: YourTemplateName.dwt.cfm - this tells Dreamweaver is a ColdFusion template.
I hope I understood you and that this helps.
Lawrence Cramer - *Adobe Community Professional*
http://www.Cartweaver.com
Shopping Cart for Adobe Dreamweaver
available in PHP, ColdFusion, and ASP
Stay updated - http://blog.cartweaver.com

Inserting regions , zip codes for a country

Hi,
I am looking for a solution to insert regions for a country.
Say from spro->general settings -> set countries -> insert regions , the new entries for a region of a country is possible , but we have to enter one by one.
Is there any other way to insert all the regions of a country all at once ? how to insert the zip codes of a country ?
Thanks.

HI,
write a BDC program to upload at once for the transaction'OVK2'.
Cheer's
Mahesh

How to insert a script code before the /head tag?

Would like to insert a <script> code inside all the pages of my website, and it has to be placed before the </head> code.
Can I manage this with muse? Else, each time when I export the site as HTML, I need to open the updated file(s) and copy and paste again the SCRIPT code in the HEAD.

Adding scripts to the head section of your documents is not currently supported in Muse, however it is planned for future versions of Muse.
You can add links for scripts using Object -> Insert HTML, but they will be inserted roughly at the position of the HTML page item.

Insert piwik tracking code in wiki pages

All-
i need to insert piwik tracking code in certain wiki pages (don't want to track them all). is there anyway to modify just certain pages? i cannot find them on my server. Code below
Thanks,
Chad

<script type="text/javascript">
var pkBaseURL = (("https:" == document.location.protocol) ? "https://www.mscei.com/piwik/" : "http://www.mscei.com/piwik/");
document.write(unescape("%3Cscript src='" + pkBaseURL + "piwik.js' type='text/javascript'%3E%3C/script%3E"));
</script><script type="text/javascript">
try {
var piwikTracker = Piwik.getTracker(pkBaseURL + "piwik.php", 2);
piwikTracker.trackPageView();
piwikTracker.enableLinkTracking();
} catch( err ) {}
</script><noscript></noscript>


Actually, you can use the double bracket entry to insert a link onto a wiki even if the page name doesn't match the title. To do that use the following format [[pagename|page title]]. The same format will work if you add a new page and want a
different title on the page than the page name.
1) Yes, you can use the Link approach to add Links from within the site collection.
2) SharePoint knows its in the same site collection based on the beginning of the URL. It can identify the address of the site collection from the url and the properties of the Wiki Site.
3) The main difference between the two approaches is that using the Link method you can add a link to a site external from SharePoint. Using the SharePoint method you can't. For links inside the site collection the result should be the same in
either case.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How to prevent the insertion of rollover code when using a template

Hi there
I am designing a site in Dreamweaver using templates. These templates use rollover images. The code that DW uses for the rollover I have abstracted out into a separate javascript file, which is linked to in the header. Further, I am using window.onload() to call the preloader instead of the <body> onload event. All this works fine.
The problem is that every time I make a change to the template, DW re-inserts the rollover code into the head of the HTML file, and reinserts the preloader code into the <body> tag.
Now, I have found a solution to the <body> tag problem by changing the preload flag from 1 to 0 in the link created; it seems that DW uses this flag as in indication of whether to insert the onload code into the boday tag. So that part is fixed.
But I can't find any way to keep DW from inserting the unecessary and redundant rollover code into the head of the generated HTML files. Is there a way I can prevent this from happening?
...Mike

Just don't externalize your js until the very last step before publishing.
You can let the dev team know about this here -
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Hi, i downloaded the creative suite and installed the trial versions of the programs (Photoshop etc.). when i try to insert the alphanumeric code to set it regularly operative it doesn't let me digit letters so that the code lies incomplete and the obtain

hi, i downloaded the creative suite and installed the trial versions of the programs (Photoshop etc.). when i try to insert the alphanumeric code to set it regularly operative it doesn't let me digit letters so that the code lies incomplete and the obtainment of the licence fails. how can i solve this disfunction?

The alpha numeric code is the redemption code which needs to redeemed by following the steps in http://helpx.adobe.com/x-productkb/global/redemption-code-help.html
This shall help you to use the CC .
Regards
Rajshree

"null" when trying to insert HTML embed code after 2014.3 update

I am currently attempting to insert the HTML code of an excel spreadsheet into my adobe muse site. If I copy paste the embed code directly onto the page, nothing happens. If I try the "insert HTML" function, when I paste the embed code there, it simply places "null". I have successfully pasted the same embed code into my muse site before, but the problem began after I updated to Muse 2014.3. Please help me with this as it is inhibiting me from the production of my website where the embedded spreadsheets are extremely important.
Here is the embed code.
<iframe width="358" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=84CEA296175B532C&resid=84CEA296175B532C%21193&authkey= AP_X9buPgnrR1MM&em=2&ActiveCell='HA_Tier_List'!A3&Item='HA_Tier_List'!A%3AD&wdHideGridline s=True"></iframe>

I had success using museGrid's 'iFrame Builder' widget. Here's the iFrame that it created...
<iframe class="actAsDiv" src="https://onedrive.live.com/embed?cid=84CEA296175B532C&resid=84CEA296175B532C%21193&authkey= AP_X9buPgnrR1MM&em=2&ActiveCell=%27HA_Tier_List%27!A3&Item=%27HA_Tier_List%27!A%3AD&wdHide Gridlines=True" style="border:0px #FFFFFF none;" name="myiFrame" scrolling="no" frameborder="0" marginheight="0px" marginwidth="0px" height="900px" width="358px"></iframe>

Restrict tcode MRBR on company code - Note 399953 correct?

Hi everybody,
In the selection screen of MRBR you have the option to select a company code, but it is NOT CHECKING on company code.
I found a OSS note: Note 399953 - Authorization for CoCode in Logistics Invoice Verification
This OSS notes describes exact the problem and the solution should be to use FI validation rules. We have created them, but it is not working, because it seems like that it only works for "posting" and "simulating" tcodes!!! But MRBR is more a changing tcode.
We have put a break point into the user exit, which is used in the validation rule, but it is not executing the user exit, but for example for MR8M (posting tcode) it is working!
Please, can anybody give me an advice how I can get MRBR checking on company code?!
Thanks in advance, Philipp

Hello, we are using ECC 6.0 and we do have problems to implement Note 399953 - Authorization for co code in Logistics Invoice Verification at all. Coudl you please send me a screenshot of your implementation? I am really not sure how to insert the authority check coding in the validation!
Thanks in advance!
Best regards
Matthias

Inserting tabbed navigation code makes my web page not display in design view..

Hi everyone..
I am on Dreamweaver 8 for MAC, and was working on a couple of web pages..these pages included divs and tables. But when I tried inserting a tabbed navigation I found at:
http://www.dynamicdrive.com/dynamicindex17/tabcontent.htm
In a nutshell, it asked me for step 1 to:
Step 1: Insert the below CSS and script into the HEAD section of your page:
<link rel="stylesheet" type="text/css" href="tabcontent.css" />
<script type="text/javascript" src="tabcontent.js">
* Tab Content script v2.2- © Dynamic Drive DHTML code library (www.dynamicdrive.com)
* This notice MUST stay intact for legal use
* Visit Dynamic Drive at http://www.dynamicdrive.com/ for full source code
</script>
The next step was this:
Step 2: Finally, simply add the below HTML to where you wish the Tab Content to appear on the page:
<h3>Demo #1- Basic implementation</h3>
<ul id="countrytabs" class="shadetabs">
<li><a href="#" rel="country1" class="selected">Tab 1</a></li>
<li><a href="#" rel="country2">Tab 2</a></li>
<li><a href="#" rel="country3">Tab 3</a></li>
<li><a href="#" rel="country4">Tab 4</a></li>
<li><a href="http://www.dynamicdrive.com">Dynamic Drive</a></li>
</ul>
<div style="border:1px solid gray; width:450px; margin-bottom: 1em; padding: 10px">
<div id="country1" class="tabcontent">
Tab content 1 here<br />Tab content 1 here<br />
</div>
<div id="country2" class="tabcontent">
Tab content 2 here<br />Tab content 2 here<br />
</div>
<div id="country3" class="tabcontent">
Tab content 3 here<br />Tab content 3 here<br />
</div>
<div id="country4" class="tabcontent">
Tab content 4 here<br />Tab content 4 here<br />
</div>
</div>
<script type="text/javascript">
var countries=new ddtabcontent("countrytabs")
countries.setpersist(true)
countries.setselectedClassTarget("link") //"link" or "linkparent"
countries.init()
</script>
<p><a href="javascript:countries.cycleit('prev')" style="margin-right: 25px; text-decoration:none">Back</a> <a href="javascript: countries.expandit(3)">Click here to select last tab</a> <a href="javascript:countries.cycleit('next')" style="margin-left: 25px; text-decoration:none">Forward</a></p>
<hr />
Well, I did all the steps required, but when I put this inside a div I had inside a table, all of a sudden I couldnt see anything in my design view, only two tables that arent even the same size..When I take out all this code, I get back my regular page..Can I see this tabbed navigation in my design view? Unfortunately, I dont have the spry widgets since I am on Dreamweaver 8..If I preview it in both Safari and Firefox (on Mac Firefox/3.0.8) (Safari 3.2.1) I can see everything fine, including the tabbed navigation..But designing in code isnt really helpful because I want to see what it looks like in design view, in case we change things-its just easier for me to work on..So I assume there is something in this code that is making my design view show nothing..
Update:I tried taking out the code again, but this time, I couldnt see anything again, even without this code..
I know that I can go to validation website, and I got a lot of errors-but all the pages I have that are in the same style have those same errors too—and they display fine..its only when I insert this specific piece of code that everything goes haywire..Is it even possible to view tabbed navigations (like the one in the above link) inside of Dreamweaver Design View?
Any help would be appreciated..

DW8 doesn't render any dynamic content, so I'd say it's a no go. You'll just have to live with that limitation or upgrade to CS4...
Mylenium

How to insert new T code in the SRET transaction

Hi Experts,
We ahve developed a new Zrepot and we want to keep this report in the area menu SRET ( Information system - SRET).
Please let me know the proedure. Through SE43 transaction I am able to create a new node but I want to insert in the SRET node.
Thanks in advance.

Hello,
Please follow the process, hope it will solve your problem:
1. use t-code SERP
2. choose SAP1/SAP2 (as per your requirement) for SRET transaction
3. Select your desire node
4. Execute
5. Add new node
6. Save
Thanks
AKG

Inserting externally purchased code into Muse.

I purchased code that I would like to use in my site. How do I use it with Muse? I understand how to place HTML, but right now I have CSS and JQuery files. Is there any way to get it in there?

It's hard to give a useful answer to that question. There's a wide variety of HTML widgets out there with lots of different requirements...
Generally speaking, CSS files usually contain styling info, to control how some HTML elements look.
JS files are scripts that usually attach behavior to certain HTML elements.
Usually you'd also have some HTML to insert so the CSS has something to style and the JS has something to attach behavior to.
Muse has a few features that may help you integrate this fabulous thing into your Muse layout.
1) Insert HTML allows you to insert a bit of HTML which Muse will export along with the rest of your page.
2) The page properties dialog metadata pane allows you to insert HTML code into the <head> of the exported HTML page.
3) The 'Add files for upload' menu item allows you to tell Muse to upload additional files to your website. They'll be uploaded into a folder named 'assets'.
Depending on what you have, you might be able to use some of these features to get your wonderous thing into Muse without editing any of Muse's output.
If these features aren't sufficient for your use case, you may have to edit the exported HTML as suggested by iamDK. Note that if you do this, you'll have to re-edit the exported HTML every time you export/publish/ftp upload from Muse, as Muse does not preserve any edits made to the generated HTML.

What is inserting the following code onto pages " div id="bikatoc" style="display: none;" a class="control" Close /a div class="toc" ul li class="toc-h2

I am doing web development and when working with the wordpress dashboard tiny mce, each time I hit the update button the following piece of code is inserted into the page I am working on.
<pre><nowiki><div id="bikatoc" style="display: none;"><a class="control">Close</a>
<div class="toc">
<ul>
<li class="toc-h2"><a href="#toc0">Just for the Health of it</a></li>
<li class="toc-h2"><a href="#toc1">Wild Yukon River Salmon</a></li>
</ul>
</div>
</div>
</nowiki></pre>
Something is scanning the h1-h6 tags and creating a table of contents and inserting it into the page. This also happens when I use firebug on other random pages while using firefox.
I have tried several other browsers to determine if this is a wordpress issue, but this only happens in firefox. It also only happens when I make changes with firebug in firefox. Using firebug lite in chrome did not cause this problem.
I have been looking all over to figure out what is going on and why the is happening. It is making development near impossible and is forcing me to use a different browser (which I don't enjoy at all)
Any help you can give me would be wonderful.
Thank you for your help

Is it always hidden with display:none?
One standard diagnostic step is to try Firefox's Safe Mode to see whether it is caused by a custom setting or add-on.
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in [http://support.mozilla.com/kb/Safe+Mode Safe Mode] using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
If the inserts stop, this points to an add-on as the problem. Figuring out which one it is would be the next step. (If the TOC is always hidden, perhaps it is something SEO-related.)

Variant tcode insertion in T code OMBA

Similar Messages

Maybe you are looking for