Varying amount of policy definitions on WAE devices

Apologies if this question has already been addressed.
What is the correct procedure for bringing all other WAE devices to the same amount of Policy definitions as the CM Manager?
It is a relatively small setup for now, so everything can be part of the "AllDevicesGroup"
Any pointers/assistance greatly appreciated.

Similar Messages

WAAS Central Manager Policy Definitions across several device groups

Hi there,
I am trying to find a way to apply a custom application policy(s) to multiple device groups. ( not the AllDevicesGroup).
I have not found a way to export or import the policy.
Any help would be appreciated.
Todd

I have my "Core" WAE's in a separate device group to prevent them from recieving a policy or setting intended for Edge WAEs. For example, If someone sets the assignment method to hash, I certianly dont want that pushed to my Core, ( using Mask assignment)
However, a custom application definition WILL need to be applied to both Core and Edge WAE's. Therefore I need a way to create the policy for all devices group and copy out and apply selected custom policies to the Core device group as well.
Problem: I have QUALYS Vulnerability Scanners that wreak havoc on WAE's by opening 1000's of sessions and not propoerly closing them, causing TFO Overload conditions, throughout the network.
Solution: create a custom policy to set Scanner IP action to pass-through. there are 30+ scanners so the match condition is lenthy and woudl be painful to build manually for each device group.
new Problem: need to apply this to multiple device groups.

Unable to create Policy Definitions in CM 4.1.1c

I'm trying to create a Policy Definition and assign it to an Application I created, but I when I click Submit an error pops up stating:
Transaction not completed. Policy entry cannot be updated as there is no policy entry of type Other. Please create a policy of type Other or update the type of this policy to Other.
I want this Policy to be type Basic, not Other, and there is a type Other - which I'm not choosing. So why is this error popping up? I first tried this using version 4.1.1d, but it failed so I downgraded to 4.1.1c and it still fails.
I've attached a Word document with a few screen shots showing the error, and the fact that there is a type Other, even though I don't want to use it.
Am I doing this wrong or have I stumbled on a bug?

Hello,
Read "Create Download Page for Embedded PL/SQL Gateway" section in following documentation.
http://docs.oracle.com/cd/E14373_01/appdev.32/e13363/up_dn_files.htm#CIHDDJGF
<li> The first option is to modify the PL/SQL function WWV_FLOW_EPG_INCLUDE_MOD_LOCAL to include the PL/SQL download_my_file procedure and then recompile
<li> The second, described below, is to create a page in the application that has a before header branch to the PL/SQL download_my_file procedure. You then create a hidden item on that page for the document ID of the document to be downloaded.
I like and have used second option because, you can re-use apex specific features like Authorization schemes etc.
Please note that if you want to invoke custom procedures via URL, then you should allow them at web-server level. Above documentation explains this for EPG.
Regards,
Hari

Realtek High Definition Audio This device cannot start. (Code 10)

i have a compaq presario CQ56 window7 64bit
Realtek High Definition Audio This device cannot start. (Code 10)
no audio output device is installed show up at speaker
when i did have sound it worked great then days went by i boot up and get no sound i would do system restore and get it back then it would do the same thing i even updated drivers i have service pack 1 its a 64bit system.a real pain in u know what.now i cant even get it to work at all.i would get it but as soon as i shut down.it would be gone again now its gone cant even to get a sound out of it.its making me wanna hear one more last sound and it would sound like smashed with a foot in the middle of it.then start all over again with a new one.if it didnt run so good it would be at the right of the garbage can.anybody got a answer i sure would be glad to hear sounds again makes it hard to read lips at times.but for music ur toasted i have tryed everything i can but to buy a program and it mite work or not who know for sure.
hp support Assistant show this (device) Realtek High Definition Audio,(status) error(10),(driver) RTKVHD64.sys(version) 6.0.1.6206

We have the same problem as you. Did you find a solution to your problem? Thanks.

Tools to export/omport Policy Definition in OAM

Hi
Is there a tool to import / export a Policy Definition from one environment to another in OAM? Can we use Oracle Configuration Manager?

Hello Prashant
Thank you for your reply. Do you have the link to the document you refer to?
I am looking at http://www.oracle.com/technology/documentation/ocm.html
Don't seems to find the section that refer to import and export guilde of Policy Definition for OAM.
Thanks again
Yes.
An excerpt from the documentation for Configuration
Manager:
This guide targets the needs of anyone who is
responsible for installing and managing the Oracle
Access Manager Configuration Manager. In addition,
this book is helpful for anyone responsible for
pushing configuration data changes from one Oracle
Access Manager 10g (10.1.4.0.1), or Oracle COREid
Release 7.0.4, deployment to another.
Regards,
Prashant.

WAE Device recovery Error

Good day,
A WAE device shows off line in the CM, however, it is accessable. When trying to recover the unit with "cms recover identity default" after de-activating the device and marking it as recoverable, it fails with the following output:
-admin-shell: spawnp: verify binary file: /sw/merlot/bin/spen: No such file or directory
Error spawning user process '/sw/merlot/bin/spen': No such file or directory
Anyone seen this? Any recommendations?
Thanks in advance.
Paul

Hi Dan,
Thanks for the response. Did the "show disk details" . Also did "show alarms major" and none are present. Below is output:
Show disks detail
RAID Physical disk information:
disk00: Online BJ5044YH 286102 MB
disk01: Online BJ5044JT 286102 MB
disk02: Online BJ5044TM 286102 MB
RAID Logical drive information:
Drive 1: RAID-5 Okay
Enabled (read-cache) Enabled (write-back)
Mounted file systems:
MOUNT POINT TYPE DEVICE SIZE INUSE FREE USE%
/sw internal /dev/sda1 991MB 16MB 975MB 1%
/swstore internal /dev/sda2 991MB 16MB 975MB 1%
/state internal /dev/sda3 7935MB 131MB 7804MB 1%
/local/local1 SYSFS /dev/sda6 22318MB 141MB 22177MB 0%
.../local1/spool PRINTSPOOL /dev/data1/spool 991MB 32MB 959MB 3%
/obj1 CONTENT /dev/data1/obj 121015MB 128MB 120887MB 0%
/dre1 CONTENT /dev/data1/dre 119031MB 128MB 118903MB 0%
/ackq1 internal /dev/data1/ackq 1189MB 32MB 1157MB 2%
/plz1 internal /dev/data1/plz 2379MB 65MB 2314MB 2%
Show alarms major
Major Alarms:
None
Any idea's?
Thanks
Paul

Windows Server 2012 Group Policy Block USB Storage devices @ User Level Not getting applied on a Domain Client machine with Windows Server 2008 R2. Why?

Hello,
I have a Windows Server 2012 R2.
I have configured the Group Policy on it to block the usage of USB - Storage Devices @ user level on the client machines. It works properly for my Windows 7 client machines but it's not working on one of the machine having Windows Server 2008 R2 installed
on it (this machine is also a domain client in the same domain).
I will really be thankful if anyone can suggest some solution to this issue.
Please feel free to write back in-case I have missed anything obvious to be shared.
Thanks!
-Vinay Pugalia
If a post answers your question, please click "Mark As Answer" on that post or
"Vote as Helpful".
Web : Inkey Solutions
Blog : My Blog
Email : Vinay Pugalia

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support

IPrint Policy - Failure on all devices

I had posted on this issue earlier and had thought that the policy was reporting as failed but actually deploying printers. What I am seeing right now is that the policy fails to do anything. The iPrint server is the appliance server and the client is installed, 5.90, and a manual install of the printer(s) works correctly. Is there a guide that might help with this process? It would be useful to get this working for the end users. The Novell documents really doesn't provide enough detail to be helpful in this case.
Richard

Stephan, Sorry about that. What I meant was that the iPrint Server is the new iPrint Appliance server and not native to OES. I wouldn't think it would make a difference for the policy. I wish I would have kept the error codes and posted that information but that is sitting on my desk.
My policy setup is only listing the iPrint printer. I don't have it deploying or check on drivers or the client. I even turned off the set Default printer check box to see if that made a difference. I am not sure if I am failing due to not filling all the remaining information out or if I have a registry setting or some other option in Windows that is causing conflict or what. Basically all I am wanting is to set up printer deployment for banks of clients so that no matter what the client machine is doing, reimaged, changed groups, etc, I know a set number of printers are loaded.
Windows 7 Pro (Clients)
ZCM 11.2.3a MU1 (Currently - started process to move to 11.2.4)
SLES 11 SP2
Most of my client systems are getting Power User or User access only. I do have a few that have Admin rights locally. None deploy printers from this policy.
Thanks for the follow up.
Richard

Policy definition corrupted?

I am trying to edit a Group Policy on a server 2012R2 box.
I get a popup error which says "Resource '$(string.VerMgmtAuditModeEnable)' referenced in attribute displayName could not be found. File c:\windows\policydefinitions\inetres.admx, line 1495, column 249"
And the InternetExplorer nodes are completely missing from the policy editing Window (under User Policies, Administrative Templates\Windows Components) so I can't view or edit these settings. I have five DC's in the domain and - not surprisingly
- they all show the same symptoms.
SFC doesn't find anything to object to.
Do I have a corrupted file? How can I (should I) attempt to repair this?
No sig is a good sig

Hi Andrew,
>>I have five DC's in the domain and - not surprisingly - they all show the same symptoms.
Based on the description, we should use Central Store for storing .admx files. The location for Central Store is:
%systemroot%\sysvol\domain\policies\PolicyDefinitions
>>get a popup error which says "Resource '$(string.VerMgmtAuditModeEnable)'
referenced in attribute displayName could not be found. File c:\windows\policydefinitions\inetres.admx, line 1495, column 249"
To fix the issue, we can try to copy inetres.admx and inetres.adml from
%systemroot%\policyDefinitions folder on a computer with no such problem and then copy the files to the Central Store; or we can try to download the inetre.admx and inetres.adml from Microsoft download center.
Specifically, the location for inetres.admx is:
%systemroot%\sysvol\domain\policies\PolicyDefinitions
The location for inetres.adml is:
%systemroot%\sysvol\domain\policies\PolicyDefinitions\[MUIculture]
(for example, the U.S. English ADMX language-specific file will be stored in
%systemroot%\sysvol\domain\policies\PolicyDefinitions\en-us)
If we want to choose to download the .admx files for internet explorer, the following link can be referred to.
Administrative Templates for Internet Explorer
http://www.microsoft.com/en-in/download/details.aspx?id=40905
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

ADF Security + Policy definition repository

Hello,
As mentioned in the adf_security document, we are using the fusion middleware control to manage the security for deployed application.The policy store shows the principal,permission class details.
With this information it is very hard for user(administrators) to manage the security. With current information display, i think administrator also should be aware of the technical terms used in the application for particular resource or particular task flow name resource/region name.,
e.g in fusionmiddleware control
Permission Class oracle.adf.controller.security.TaskFlowPermission
Resource Name /WEB-INF/flows/sampleTF.xml#sampleTF
Permission Actions view
Is there way to provide some descriptive name for resource name , so that end user can understand what is task flow or resource is??
Any idea??

Hi,
no, not that I am aware of. Looking at the jazn-data.xml XSD
<permission>
Child elements: <class>, <name>, <actions>There is no metadata available for a descriptive name of the permission class of the target name. OPSS would need to change their XML to allow descriptive names.
Frank

Support 802.1q at WAE device?

Hi.
I'm sy jeon
I wonder if the cisco WAAS support 802.1q.
We are planing to attach the cisco wae to ethernet switch.
as you know, we should configure the two vlan to WAE, one for PBR, wccpv2, other to return the traffic to router.
if so,How can I configure 802.1q in WAE,
if our network configuration is incorrect, please give me advide about that.
Thank you.

Hello Sy,
Cisco WAAS does support 802.1Q. It depends on your deployment setup. If you are using WCCP, there will be no need to configure dot1q trunk as the traffic will be handled either by redirect/return method. For the return method, it can be either ip forwarding (WAAS will used configured default gateway) or GRE Return if using a configured egress method of negotiated return or Generic GRE.
If you are using inline interception, meaning you will be using an inline card to intercept the traffic, then you can configure dot1q trunk for the inline ports and define which VLANs you would like to intercept and optimize traffic on.
Let me know if this answers your question.
-Ramon

What EXACTLY are the 4 NVIDIA High Definition Audio devices on N570GTX - Win 8.1

Hi guys,
one of my rigs runs an N570GTX on Win 8.1 64bit.
In Device Manager > Sound, Video and Game Controllers, there are 4 "NVIDIA High Definition Audio" listed.
I use 337.88 drivers (NVIDIA Control Panel version 7.7.760.0).
What is the purpose of EACH of these 4 devices:
As a side note, my other rig running an N660GTX on Win 7 64bit only shows 1 "NVIDIA High Definition Audio" in Device Manager > Sound, Video and Game Controllers.

Okay, by examining the devices (enabling, disabling, reading driver data), I can conclusively state that one of the drivers (in my case residing in Location 1) is exclusively tied to the HDMI port on my GPU – when I disable it, my HDMI device (I have only one; shame, because I can't isolate the devices better) stops being listed in Windows Sound Control Panel; when I disable all other devices except that one, my audio over HDMI works fine – this leads me to believe that the other ones are not really essential codecs required for HDMI audio, but are instead related to the individual audio outputs.
In summary, assuming the other two devices (residing, for example, in Location 0 and Location 2) are for audio output on DVI ports (usable via DVI->HDMI adapter/cable), there's still one NVIDIA High Definition Audio device (residing in, say, Location 3), which doesn't seem to be in use in relation to some sort of global codec mechanism (since I can disable it without affecting my HDMI port audio output), that is unaccounted for!
Any idea what other output can the remaining device be linked to, since GTX570 has no S/PDIF pass-through connector on the board itself (to connect it to the motherboard's S/PDIF output)?
Could the remaining device be there only as a legacy stub for S/PDIF connector which was present on the pre GeForce 400 Series cards, since they share the same NVIDIA drivers with the post-Tesla series?
But in that case, why does my GTX660 list only one NVIDIA High Definition Audio device in Win 7 64bit?
Quote from: Nichrome on 02-July-14, 19:33:05
Apart from the sound you can get through HDMI (which would be 1 or 2 of these in management), it provides your board with some "HD Sound Drivers" which takes another 1 or 2 of these.
I have quite few of these too even on my old laptop (with Nvidia card): x4 Nvidia High Definition Audio, x1 Cyberlink WebCam, x1 Realtek HD and x1 Bluetooth sound.
Your specs read that you have a GTX770 running on Win 7 64bit; do you also have four of the Nvidia High Definition Audio devices? Or just one? Thanks!

HT4847 If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?

If you have several Apple devices feeding to the same iCloud account, is there an amount of storage made per device available free? So that you are rewarded for the additional devices?
If this multi purchase if devices is not rewarded with a larger cloud storage being available, would it then be best to have several separate cloud accounts?
Would you lose the ability to mesh data between devices??? Of could you choose to share a smaller part of the data and yet save the rest of the device data to their own cloud? So in other words, split a devices stored data between 2 different icloud accounts? One community iCloud account for partial data and individual account for data that does not need to be shared with the other devices, however it needs to be backed up. The simpler solutions would be If you have several Apple devices feeding to the same iCloud account, an amount of storage made available per device (ie: 5 units of storage free per device)
~ So that you are rewarded for the additional Apple devices by giving 5 more units of storage or backup space per device

Nobody here is an Apple employee, and my Christmas Season has been great, thanks very much. Neither am I jealous, I just abhor the fact that so many people these days expect more and more for free, in addition to what they already get for free. First world problems...
Obviously Apple do consider people with multiple devices, since the whole purpose of the service is to keep data in sync across multiple devices. Clearly, after consideration, Apple decided to give 5GB of storage for free and provide customers with the option to buy more storage if they want/need more, in line with competing services.
Everyone has their own set of unique circumstances but does that mean everyone should be rewarded with extras for free? At what point should it be considered acceptable to actually pay for additional extras you want?
And by the way, somebody expressing a different opinion, and discussing people's expectations is not being rude. Aren't you from the country that supposedly takes 'freedom of speech' rather seriously?

Changing policy for separate devices for the user

Hi everyone,
I have 4 devices connected on an active sync (Exchange 2010) for 1 user. But 1 device is not going through due to policy as I understand(please see pictures attached). Is there away to assign a different policy just to that device ?

I believe you can only set active sync policy's at the mailbox level. You may have to create a new policy and tie it to that user.
http://technet.microsoft.com/en-us/library/bb123994(v=exchg.141).aspx
http://technet.microsoft.com/en-us/library/dd876877(v=exchg.150).aspx

How to remove the IT policy from my Torch 9800, or how to reset the device to original setting

I have a Torch 9800 formerly- used for business emails. According to our company policy there was an IT policy installed to the device hence would force the user to set password protecting the device.
Now this device has been retired and I like to use it only for regular phone calls thus do not like to have a password protection. My question is:
How to remove the IT policy from the device?
or
How to reset the device to original setting?
I have been trying to swipe and scrub the device several times but that IT policy still exist. Need help......
Solved!
Go to Solution.

See the RIM Knowledge Base article here for information on how to remove an IT Policy. See the Method Three in the link:
KB14202 How to remove an IT policy from a BlackBerry smartphone
Read this RIM Knowledge Base article to reset your device to the factory settings.
KB18998 How to reset a BlackBerry smartphone to factory defaults
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Varying amount of policy definitions on WAE devices

Similar Messages

Maybe you are looking for