VAT error

Hi,
i m getting the error is tax code for the TAXNG.So please guide me to know the Configuration steps for VAT. client is Negeria so i want to do the configuration settings for VAT @ 5 % (Nigeria) bcoz there is no excise
so please guide me what are the setting is required to the configuration step by step
Edited by: prasanna_sap on Feb 2, 2011 3:21 AM

hi,
you can do it in FTXP.
Country : NIGERIA.
maintain V0 - for output tax and see the VAT tax condition type is existing in NIGERIA - PRICING PROCEDURE
please check &n confirm
balajia

Similar Messages

VAT Error in Billing

We recently began using PeopleSoft's VAT functionality in a few countries. However, we now have an issue where when we go to "-->Billing-->Maintain Bills-->Standard Billing", and when we click to "Add New Value", if we select one of the business units utilizing VAT, we get the following error message:
"Buyer's Location Country Required"
However, I have checked the Customer pages, and we have the Customer set up with the correct VAT Registration Country, and have the Country identified on each of the addresses set up for the customer.
Would anyone know why we might be seeing this error?
Any thoughts/suggestions are appreciated.
Thanks.

We recently began using PeopleSoft's VAT functionality in a few countries. However, we now have an issue where when we go to "-->Billing-->Maintain Bills-->Standard Billing", and when we click to "Add New Value", if we select one of the business units utilizing VAT, we get the following error message:
"Buyer's Location Country Required"
However, I have checked the Customer pages, and we have the Customer set up with the correct VAT Registration Country, and have the Country identified on each of the addresses set up for the customer.
Would anyone know why we might be seeing this error?
Any thoughts/suggestions are appreciated.
Thanks.

Rouding VAT ERROR

Hello People,
I have the MWAI condition type rounding rule defined with ' ' (V_T685A-TXPRF = ' ').
In spite of this correct configuration some FI documents (launched with batch-input) are not well calculated and the rounding os the tax is being made down.
Example:
TAX PERCENTAGE = 13%
TAX BASE = 1,2
SAP CALCULATED TAX = 0,15
CORRECT CALCULATED TAX = 0,156
VAT ROUNDING should be 0,16 and not 0,15.
Is there some customizing missing? i'm searching for notes but i'm not finding anything.
Thank you,
Nuno Anjos

Dear,
Look following information:
1 - Enter OBYZ: select Condition Type. Try corretc it in rouding rules "Commercial rounding" "round up" and "round down".
2 - http://help.sap.com/saphelp_470/helpdata/es/7c/e06a3d987e910fe10000000a114084/content.htm
regards

Invalid VAT number (UK )

I have tried to create a vendor in of out co-code and it gives error" invalid VAT number " . I have checked the config and other vendors ( UK ) are there without error. I have verified online and this particular VAT number is correct.The same VAT( error ) which has same format I tried to put in other vendor and gives same error.So can some one guess what could be possible reason for not accepting the particular VAT of UK ? In country specific check it has max 14 and check 1 .
Thanks
Satya

If there is a valid VAT number and SAP vendor master rejects that as invalid VAT number then what are my options? Just one case where it throws error.
Thanks
Satya

Business Area in BAPI _ ACC _ INVOICE _ RECEIPT _ POST & BAPI_INCOMINGINVO

Dear Experts
I am using this two BAPIs. for Invoice creation
BAPI_INCOMINGINVOICE_CREATE for MIRO Invoice
BAPI _ ACC _ INVOICE _ RECEIPT _ POST for FB60 invoice creation,
In this I am facing Problem to Pass Business area, in BAPI _ ACC _ INVOICE _ RECEIPT _ POST no Business area field found (for vender line Item) this is required for us
and in this bapi '' BAPI_INCOMINGINVOICE_CREATE '' business area field is available when I pass value in that it is asking Profit center in Header Data
kindly help me to solve this very urgent
Regards
Sathish J

Hi Meridius
I am having a similar problem to the one which you described in this thread. Tax is not calculated when I use BAPI_ACC_INVOICE_RECEIPT_POST for vendor invoice postings.
If you want more details regarding my problem, please look at the following thread:
VAT error when posting with BAPI_ACC_INVOICE_RECEIPT_POST
Will you please help me?
Sephiroth

Delivery Notes - No VAT Group (SAP Error Code -10)

Hi
I already created delivery notes before, but today an error occured "VAT-Group Missing..."
Do I have to set the VATGroup property manually in the Document Line? If I do with a fixed value, it works again.. But where do I get the right VAT Group? From customer (Business Partner) or from Item? (Maybe if you could paste me a little code example if you already solved this)
Thanks and Regards

Hi
Thanks for the hint.
I already solved it, it was a mistake in the input data of the Addon: I did not set the Warehouse Code..
If Warehouse Code is empty (""), obviously the VAT cannot be calculated (though the error message "VAT-Group Missing.." does not really help here.)
Regards

Error: Maintain VAT registration no. for country in previous screen

Hi,
I am getting an error "Maintain VAT registration number for country in previous screen"
The vendor is based in Amsterdam and the VAT Reg No. is for Netherlands. There are other VAT Reg numbers (different countries) as well for the vendor maintained in the 'Others' tab in master data.
Because of maintaining the VAT reg no. on main screen of master data, I am getting an error in Vendor tax acquisition report, where VAT reg. nos. for other countries are missing and I can see only Netherlands VAT reg number in the report.
Has anyone of you faced such kind of a issue?
Thanks,

Dear,
Please could you use the following website in order to check if the VAT reg number is correct:
http://ec.europa.eu/taxation_customs/vies/
sometimes happens that there is some mistake in the VAT reg no. provided...
I hope it helps
Silvia

Dealing with error:AR191-ISO code in VAT Registration Number in Cust Master

Hi,
While creating a Customer Master, user wants to enter a VAT Registration number (in the control data tab) which begins with a country code(ISO code) that is not the country code of the company code for which the customer is created.
As a standard practice, system prevents this throwing error AR191 suggesting that ISO Code not correct in VAT Reg. number
Is there any way by which we can still allow user to enter a VAT registration number of his choice & requirement, which is not beginning with the ISO code of the country in which company code exists
See example below:
Country of Company Code XYZ :UK
Customer Created in this company code should ideally have VAT Reg. Number starting with ISO code for UK but user wants to have a different VAT Reg. Number used which is not starting with ISO Code of UK.
Is there option available in SAP by means of which we can deactivate this check?
In the configuration for u2018set country specific changeu2019, we can select options based on the length of the VAT Reg. Number and itu2019s formatting but how can we get rid of the check on ISO code?
Thanks in advance
Regards,
BM

The length of the VAT number, which is important for this check,
is stored in field UINLN.
If the check comes across an invalid format, an incorrect country key, or an incorrect check digit, the exception NOT_VALID is triggered, and an error message is sent. If the check runs successfully, nothing will be drawn to the attention of the user.
The check rules are stored in table T005 in the field PRUIN.You can deactivate the following rules.......
1 Maximum value length, without gaps
2 Maximum value length, numerical, without gaps
3 Length to be kept to exactly, without gaps
4 Length to be kept to exactly, numerical, without
5 Maximum value length
6 Maximum value length, numerical
7 Length to be kept to exactly
8 Length to be kept to exactly, numerical
9 Check against country-specific edit format
10 Deactivate Postal Code Check for USA
Please do this.
Regards,
Dhrubashis De

ERROR ar 196 VAT registration number contains invalid characters

HI GURUS!
I have a problem when i am trying to create a new vendor.
The case is that i dont have the correct registration vat number and this vendor is from the uk.
I have a number to use but it is not the correct one.
The thing that i want to do is to create this vendor with my wrong number and to avoid the validation of the specific for the country.
I tried with the t-code OY17 and i desactivate the flags for vat registration number, but it still giving me the same error ..
What should i do???
Thanks in advance

You can change the Vendor VAT No after you get it.
Till such time enter the dummy VAT No starting with Country Key...Example for Germany DE..... and for India IN.....
Restore orignal values in OY17.
Srinivas

VAT registration number in VD02 is in error

Hello ALL,
I'm seeking your advice on the following error i encountered during a change in the customer master.
I have one customer with ES as it's country.
The current VAT registration number is ESB0062082C. However, i want to change it into ESW0062082C.
However, when i try to change it, the error "VAT registration number is invalid" appears.
When I try different VAT numbers like ESA########, ESC########, ESD########, ESF######## until ESH######## it is all accepted.
But when i use ESI######## to ESZ########, the error "VAT registration number is invalid" appears.
Can you please tell me what causes this? what should i modify in the customizing to allow ESW########?
Thanks in advance.

Hi,
The control digit (the final C) cannot go on C after change the root B by W. You can check the codification of VAT number in Spain in this [article of wikipedia|http://es.wikipedia.org/wiki/N%C3%BAmero_de_identificaci%C3%B3n_fiscal] (in spanish). You have a [link|http://es.wikipedia.org/wiki/C%C3%B3digo_de_identificaci%C3%B3n_fiscal] with the algorithm in differents programming languages.
If you have doubts, do a debugging session in function module EU_TAX_NUMBER_CHECK, when it call the subroutine check_digit_check_e.
Finally, here, in Spain, is usual that salesman (the people that usually give this kind of information) will be inaccurate with this kind of data.
Regards
Eduardo

Tax Payment Wizard-VAT Payment error

Hi friends,
I am trying to do VAT payment using Tax Payment Wizard.System calculates and displays VAT Payable amt,Credit Amt and Payment amt.Then I enter the Direct Payment amt in the Payment means.Then I click 'Next' button.In Step 6 of Tax Pmt Wizard ,General Parameters window opens.Here after filling all the parameters when I click on Next button ,system shows following error message -
In "Value" field, enter number greater than 0 [Outgoing Payments - Accounts - Paid][line: 2] [Message 131-22]
What is the reason? Your expert advice will be a great help.Please reply.
Thanks & Regards
Sudhir Jadhav

Hi Sudhir,
What is your B1 version & PL? There is known bug in certain versions.
Thanks,
Gordon

Error in VAT registration No

Hi
I am getting an error for vat registration no while putting the data in Vendor master data(xk01) for country GB,have checked the country Settings to,the Length of digits is 14 whereas i am putting 11 digits
Error : Vat Registration No Invaild
Thanks
Dilip

Dear,
Please could you use the following website in order to check if the VAT reg number is correct:
http://ec.europa.eu/taxation_customs/vies/
sometimes happens that there is some mistake in the VAT reg no. provided...
I hope it helps
Silvia

Error importing VAT Groups with DTW

Hello,
I have a problem with importing with DTW VAT Groups. The error I am getting is:
"" is not a valid value for field Category. The valid values are 'O' - Output tax and 'I' - Input tax. This error appears even if in my csv in the Category column I have set up O for outputs and I for imputs.
If i don't put anything in field Category, it imports them fine, but all of output type.
Am I missing something or this is a bug?
Thank you,

Irina,
The DTW uses the same properties as the SDK objects. If you look at the VatGroups object in the DI API help documentation for the SDK, you do not use an "O" or "I", you use and enumeration to signify whether the tax is for input or output depending on the document type. You will want to look at the VatGroups business object in the SDK help and specifically for the Category property the BoVatCategoryEnum Enumeration.
HTH,
Eddy

India - VAT Invoice Generation / Accounting Completed with Error

Hi,
Can any body explain why below program completed with error
"India - VAT Invoice Generation / Accounting"
I checked completion text,It's showing Normal completion,
Regards,
Reddy

Hello..
is there any one to help me???????

Error sending pre-VAT

Hello together,
perhaps you have still a piece of advice for me. I am getting the following error when I sending the UVA from the tansaktion FOTV in our ERP system .
Entry Date 05.06.2009 12:08:32
Transfer Ticket clearingstelle 0000015800202200209
Return code 110015003
Text of the return codes
At the PI you find the following error trace.
For the validation of usedatapart (Nutzdatenteil) An error was detected; Error parsing XML string occurred (SAX) icon_biggrin.gifatatype error: In element 'control number' (Steuernummer): value 'XXX' does not match regular expression facet '\ d (4) 0 \ d (8 }'..( tax in case No. 1) false tax identification number in Tax Case 1 (org.xml.sax.SAXException)
XXX is in this case a twelve digits number.
Can anybody help me.
Greeting
Marc Ehm

Hi,
thanks for the quick reply.
XXX is in this case a twelve digits number. Can you tell me what format this number must have.
The number represents the tax identification number. It is from the ERP system. How can i check this and how can i correct the validation?
Regards,
Marc Ehm

VAT error

Similar Messages

Maybe you are looking for