VB macro to connect and refresh data in smartview

Hi All,
I imported a hyperion financial report into smartview power point. i want the following steps to be automated.
1) make a connection to data source
2) perform refresh all command
3) save the power point
4) close the point
Is this possibe and can you please share some ideas or VB macro code?
Thanks
Ashok

we tried the function
For Refresh
Public Declare Function HypExecuteMenu Lib "HsAddin" (ByVal vtSheetName As Variant,ByVal vtMenuName As Variant) As Long Sub Example_ExecuteMenu() sts = HypExecuteMenu("Sheet1", "Panel")  'returns 0 sts = HypExecuteMenu(Empty, "Smart View->Refresh") 'returns 0 sts = HypExecuteMenu("Sheet1", "Refresh")  'returns -73(ambiguity) sts = HypExecuteMenu("Sheet1", "Connections")  'returns -15(invalid parameter because "Connections" is not associated with an action) End Sub
but throwing the error as ,no sheet to refresh,do you know the reference names to use in ppt instead of sheet1 mentioned in the above example?
Regards,
Ashok

Similar Messages

  • Phone is connecting and transfering data in the ba...

    Today at work my Nokia 6710 did start to transfer data in the background without my interaction. I was typing a sms while the symbol for data transfer below the 3G lit up. Did a quick check in the menu->settings->connectivity->Conn.mgr.  Yes, one active connection was sending and receiving data, small amounts 3-4kb, then idle.
    I ended the connection in the Conn.mgr. Closed all the apps in the phone and waited a minute. Then it started one new connection in the background again! Same procedure, checked and closed it...! This did not stop, every time the phone started a new connection after a minute? 
    I did try to find what could cause this, but no success. What is going on, any ideas for what to check? 
    I finally deleted my  3G access point in menu->settings->settings->connection->destinations->internet
    This did stopp the phone from connecting and transfering data. 
     Back home I connected to my WiFi at home, used the browser and closed the connection. Guess what, the phone did now connect via the WiFi in the background doing exactly the same type of small data transfer - without asking!? 
    What is this? I downloaded the latest F-Secure mobile version to check for virus, but nothing, it was clean.
    I did shut down the phone, will not use it until I can stop these unwanted connections and transfers. Please help.

    Finally I found the reason for these data transfers. The upgrade of the mentioned files did have something to do with all of this, but the removal of the files did not help. 
    So, I did go through all the settings in again for Connections and the setting for Share Video were set On...? Turning this setting Off did stop the background data transfers. 
    Problem solved perhaps. But I still wonder why the Share Video setting did start sending data while the phone was not in use? A bug? A virus? A hacker trying to activate the webcam?

  • Incremental Loads and Refresh Date

    Hi all,
    Thank you for taking the time to review this post.
    Environment
    Oracle BI Applications 7.9.6 (Financial & Project Analytics)
    Oracle E-Business Suite 11.5.10
    Question
    I have a Test BI Apps 7.9.6 in a Test environment that is connected to a static EBS 11.5.10 data source. As part of my testing phase I'd like to do multiple Incremental Loads to get an accurate performance impact and timing study for the final pre-approval before migrating to Production. I can get a refresh of EBS which has a week's worth of transactions after my Initial Full Load. What I'd like to do is change Refresh Dates to "trick" the Incremental Load into only loading one days worth of data at a time, rather than the full week's worth of data in the Incremental load. Is this possible, and if so, how?
    Example timeline:
    Today - Initial Full load using Test EBS as of today
    1 week later - Refresh static Test EBS from Production with a week of transactions
    Post Refresh - Run daily Incremental jobs using static Test EBS
    First Incremental Load - Today's position + 1 day,
    Second " " - Today's position + 2 days,
    Third " " - Today's position + 3 days, etc
    As always all comments and solutions greatly appreciated.
    Kind Regards,
    Gary.

    Say on the 01st of the month, you did a Load.
    Then on the 08th of the month, the source EBS system was itself refreshed.
    What you want to do is to run a single day refresh on the 08th for all data from the 01st to the 02nd of the month), and then another single day referesh -- whether on the 08th or on the 09th , you don't care -- for all data from the 03rd to the 04th.
    Unfortunately, the refresh is from last refresh date to current date. You can't define "refresh upto date". Therefore, your first 'incremental' refresh on the 08th would refresh all data from the 02nd to the 08th in one shot. What you could try to do is
    a. After the first load on the 01st, shutdown the BI DWH.
    b. When the EBS test source is refresh on the 08th, reset your SYSTEM CLOCK ON THE BI DWH DATABASE SERVER to the 2nd (or 3rd) of the month.
    c. Now, when you run a refresh, BI will extract all data from the 01st to the 02nd or 03rd (even though EBS is as of the 08th).
    d. Once this is done, shutdown BI DWH.
    e. Reet the SYSTEM CLOCK ON THE BI DWH DATABASE SERVER to the 3rd or 4th of the month.
    f. Run another Incremental Refresh.
    ... and so on ...
    Hemant K Chitale
    http://hemantoracledba.blogspot.com

  • Schedule Full ETL, Incremental ETL and Refresh Dates

    Hi - I'm trying to set up a schedule that runs a weekly execution plan on Saturday am. This weekly etl needs to be a full load always. I have a similar execution plan that I want to run all the other mornings as an incremental etl. I have the weekly plan set to run as 'Full Load Always'. Since it is set to run as 'Full Load Always', the refresh dates are not being set on the source tables. The second daily plan then initially runs as a full etl since the refresh dates are null. Is there a way I can accomplish scheduling the weekly execution plan to run as a full and then the daily execution plan to run as incremental without any manual intervention (such as manually resetting the source dates each week) ?
    Thank you.

    You have to execute only 1 EP for both Incr and Full loads, followed by another custom EP which set the DAC refresh table(W_ETL_REFRESH_DT) column as NULL.
    ex:UPDATE W_ETL_REFRESH_DT SET LAST_REFRESH_DT =NULL
    You need to schedule the custom ep to run on only Saturdays just before your actual EP start time so that you can have DAC refresh dates are null and follow load would be full load.
    You need to create a custom etl mapping so that you can set this.. that might be a command from session or workflow.
    If helps pls mark as correct :)
    Edited by: Srini VEERAVALLI on Jan 24, 2013 8:22 AM

  • Lookout 6.0 and Citadel 5 Slow to Connect and Display Data

    Wondering if anyone else is seeing this.
    We had a Lookout 5.1 Citadel 4 database running about 75-100 data points. We use hypertrends for viewing the trended data. In the old version, the hypertrends and historical data would be presented on the screen nearly instantaneously. We recently upgraded to Lookout 6.0 and Citadel 5. The hypertrends now take minutes to display and often times come in choppy. This is VERY inconvenient, especially when we try to connect other clients over our T1 WAN connection.....display time is VERY long.
    I don't want to update our other Lookout system to 6.0 until this issue is resolved, our other system has a database that has somewhere in the realm of 3000+ data points it is tracking, and we can't afford to lose the speed for the trending displays.
    Thanks for any input in advance.

    I complained to ni about the fact that nicitdl5 is using a lot of processor resources on the computer running the server process. As an answer I received the same bla bla ... more robust ... bla bla. The thing is that it is happening only when the client is accessing the server from the network. When they are on the same computer every thing is fine. I think it is more of a communication problem. You can use the performance monitor to graph the network activity of nicitdl5 to see that it is receiving a lot of packets while sending almost nothing. That leads me to the hypothesis that the client is making a lot of useless request (buggy hyper.cbx?) to the citadel server.
    Still, I'm reassured to see that I'm not alone facing that performance issue but I think that we'll have to wait for 6.1!

  • Connecting and sending data to web service

    Hi,
    I have to implement the functionality in PDF document to connect with the web service and send the form data in xml format on Click event of a button inside the form.
    During the initial development and testing I have found that document can only connect with the Web Service from within LiveCycle Designer or Adobe Pro. It doesn't work with the Reader.
    After surfing the internet I have come to know that Reader extensions are required along with Adobe Reader to communicate with the web services. Am I right?
    Furthermore, what I have to do is to distribute the PDF form to a number of people who will fill the form and submit the form data by clicking the Submit button (which will internally communicate with the web service to send data) on the form. So if extensions are required to communicate with web services from Reader, then what I am assuming is that all those people must have extensions installed on their machines along with Reader.
    On some forum I have also read that you only need to install the Extensions on the Designer machine and they are not compulsory to be on every client machine. i.e. Exntesions enable the web services communication features in the PDF form during design time. Is it true?
    Thanks in anticipation,
    Qarshi

    Be careful, your question should be posted in "LiveCycle Reader Extensions" forum. LiveCycle Data Services doesn't deal with these features.
    Nevertheless, to use webService calls from a PDF opened in the free Adobe Reader, you need to Reader extend your form.
    You can use Acrobat Pro to extend it if the PDF will not be used by more than 500 people.
    If you plan to reach more than 500 people, then you must consider LiveCycle Reader Extensions. This limitation is explained in the Acrobat EULA.
    The final users only need the Adobe Reader, they won't have to install any extension or plug-in.

  • Delta loads - for DB Connect  and master data.

    Hi there,
    Would appreciate if any one clarify me on:
    1) Are delta loads are possible as far as Master data is concerned?
    2) What are all types of data loads (Initial/ delta/ Full)are possible as far extracting data from DB connect is concerned?
    Thanks in anticipation.
    Rgds,
    A.
    Message was edited by: Ash

    Hi Ash,
    As far as I know, with DB connect you have the only option to have delta functionality - to use ODSs. Make full load from the source system to ODSs. Then update data targets from ODSs. During this update you'll have an option for init/full/delta load.
    Best regards,
    Eugene

  • Skype Abroad - No Wifi and No Data Roaming

    I will be going on a trip to Turkey in a few weeks, and I am trying to understand if I can make calls with the Skype app on my Droid without a wifi connection and with data roaming turned off.  I thought I read somewhere that Skype has it's own 3G network or some other method that I can use to make calls with the Skype app.  I would be buying Skype credit in advance.  Is what I am saying possible?
    My goal is to be able to use Skype to make phone calls without wifi and without getting charged for data roaming by cell phone carrier.  Thank you for your help.

    Sure, I know about SGO.
    The poster was asking how he can use Skype app abroad, without roaming charges, without any internet connection. This is not possible, unfortunately.
    If we are talking about SGO usage in Turkey, this won't work either, as there are no local SGO numbers there.
    Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
    Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
    Подписки | Цены

  • Tomcat and refreshing jsf component attributes in the browser

    I'm using Eclipse and Tomcat 5.0.25. I start Tomcat in debug mode with a shortcut: "C:\Tomcat-5.0\bin\catalina.bat jpda start". I have an entry in the Tomcat server.xml file that points to my web application:
    <Context debug="0" docBase="C:\MyProjects\eclipse\cdstore\WebContent" path="/cdstore" reloadable="true"/>
    I have a jsp page with a jsf dataTable tag. If I change the html markup (i.e. by typing "hello" in the jsp page) and press the refresh button in my IE 6.0 browser, the "hello" message is displayed.
    If, however, I change the content of a dataTable attribute (i.e. I change styleClass="aClass" to styleClass="anotherClass") or add a new dataTable attribute, the attribute changes are not sent to the browser when I press the browser refresh button. I do a "view html source" and they are not there.
    I have to close the browser down and relaunch the browser to see the new dataTable attributes.
    Does anybody know if there is any easier way of doing this?
    thanks, jeff

    Hi pushpa latha
    Yes it is possible to update the data at the header level using below approach
    create the component interface for your cusotm component
    use the component interface  in the header overview standard component as resuable component.
    Implement the event handler method for the button , in the event handler method get the refreshed value
    create the navigation and call the navigation (fire_outbond_plug) to cutom component by passing the plug name and refreshed data..
    set the refreshed data to your value node in your custom component.
    Thanks & Regards
    Raj

  • Having trouble opening connections and reading from Bluetooth devices.

    Hello,
    As the title states, I am having trouble opening connections and reading data from a Bluetooth device. We are using a PDA to communicate with LabVIEW. First, the Bluetooth Open Connection VI displays a timeout error half of the time. Second, when it does open, it does not read what the PDA is sending. Third, if it does allow an open connection, it will not do it a second time unless the devices are turned off.
    I also have another related question. I am using a Linksys Bluetooth USB adapter, and the driver is proprietary. Labview requires the use of a Microsoft driver, and we are having problems going back and forth between the drivers. What Bluetooth receiver would you suggest using? The reason I ask is the fact that you have Bluetooth examples of client VI's. Therefore, you must use a similar device. Thank you for your time.
    -Jon

    Hi Jon,
    I'm not sure what Bluetooth receivers were used to verify the functionality of the VIs. However, I still want to help you solve your issue. Please make sure that you are running the shipping examples and let me know what version of LabVIEW, what PC OS and what PDA OS you are using. Does the Microsoft driver work for your Bluetooth receiver if you uninstall the Linksys driver?
    With your answers I'll do my best to help you out.
    - Philip Courtois, Thinkbot Solutions

  • No network connection or mobile data connection

    So I just bought mine, at first I thought its not a problem, it just take times to get a network line.
    But seriously, the phone rarely got network connection and mobile data, if its got it the mobile data connection is only Edge.
    I thought it was the sim problem.
    There are no problem with the old one as I can still use it on other phone and it gets 3g mobile data connection.
    But still I go and get a new nano sim card just to be sure.
    Is there anything else I need to do or check before I go to the Sony Centre?

    I repaired my device last night using PC Companion.
    Today, when I left the house for work I had a 3G signal and mobile data was working. I drove 20 miles to work, which goes through areas where there is no signal, and when I get to the office I have no mobile data. I reboot and voila, 3G is back.
    This is not acceptable. And as I have had the device more than 14 days, the retailer will not refund me.
    So I am stuck with a £350 phone that doesn't work properly and no-one has any idea how to fix it.

  • Cannot refresh table - test connection works fine but refresh gives "We couldn't refresh the connection. Please go to existing connections and verify they connect to the file or server." error.

    I'm having some difficulty updating a table in my powerpivot data model. The data for the table is stored in a local excel file; if I go to
    Existing Connections select the connection and do a test then everything is successful. When however I try to refresh that particular table I get the following error:
    "We couldn’t refresh the connection. Please go to existing connections and verify they connect to the file or server."
    In the past I had this and it was an authentication issue, the files are stored on SharePoint and I wasn't logged in to Sharepoint - I have however checked this and it can't be the issue because I have other tables linked to other excel files in the same
    location that are refreshing without issue. Can anyone think of what may be causing it?
    I have even tried creating a new local excel with the same data, added it to the data model and then tried a refresh and I I get exactly the same issue. 
    Are there any known issues with refreshing data from an Excel file if, after the initial import, you add columns to the table in the excel file I was wondering if this might contribute?
    Thanks

    Hi Maracles,
    Thanks for your post.
    From your description, I tried to reproduce this issue on my test environment. However, everything is fine for me. Could you please post the specific version of SQL Server PowerPivot for Excel?
    You can try to use a trace file to troubleshoot errors in PowerPivot. If this issue still persists, please try to reinstall SQL Server PowerPivot for Excel to see if this helps.
    For more information, please see:
    PowerPivot Options & Diagnostics Dialog Box:
    http://technet.microsoft.com/en-us/library/gg399091.aspx
    Using a Trace File to Troubleshoot Errors in PowerPivot:
    http://www.sqlchick.com/entries/tag/powerpivot
    Best Regards,  
    Elvis Long
    TechNet Community Support

  • Powerpivot for sharepoint error: Unable to refresh data for a data connection in the workbook

    Hello,
     I have three errors when i try to use a simple powerpivot workbook published in sharepoint: (nothing on google has help me..)
    1-Unable to refresh data for a data connection in the workbook.
    Try again or contact your system administrator. The following connections failed to refresh:
    PowerPivot Data
    2-The embedded PowerPivot data in the workbook cannot be loaded due to a version mismatch
    3-01/21/2012 17:26:47.08  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel
    Calculation Services     bccc Medium   Session.HandleTrimmedWorkbookReloading: userOperation ApplySlicerSelectionOperation requires BaseWorkbook: "http://crm2011:2020/Marketing%20Reports/test2_excel32bits.xlsx"
    [0x409] [Saturday, 21 January 2012 09:40:18] [BaseWB ID: 2] to be untrimmed if it is currently trimmed. The workbook is currently NOT trimmed. fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.08  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     f1va Medium   CWorkbookWrapper::CWorkbookWrapper: Created with ID=4 fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.09  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     eq3r Medium   ConnectionRequest.ConnectionRequest: New connection request. SessionId=1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
    WorkbookVersion=ConnectionInfo.WorkbookVersion: Uri=http://crm2011:2020/Marketing Reports/test2_excel32bits.xlsx, Version=Saturday, 21 January 2012 09:40:18 fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     aysl Medium   Succeeded to initialize a chart. fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12  w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     8xk9 Medium   ExternalSource.ExecuteOperation: We exhausted all available connection information. Exception: Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException: Exception of type
    'Microsoft.Office.Excel.Server.CalculationServer.Interop.ConnectionInfoException' was thrown.     at Microsoft.Office.Excel.Server.CalculationServer.ConnectionInfoManager.GetConnectionInfo(Request request, String externalSourceName, Int32
    externalSourceIndex, Boolean& shouldReportFailure)     at Microsoft.Office.Excel.Server.CalculationServer.ExternalSource.ExecuteOperation(Request request, ExternalSourceStateInfo externalSourceStateInfo, ExternalSourceStateInfo prevExternalSourceStateInfo,
    Int32 index, ConnectionInfoManager connectionInfoManager, ExternalDataScenario scenario, DataOperation dataOpe... fb614a65-e398-4b97-a98d-fb7b23eab39f
    01/21/2012 17:26:47.12* w3wp.exe (0x1950)                        0x0AD0 Excel Services Application     Excel Calculation
    Services     8xk9 Medium   ...ration, Boolean verifyPreOperationConnection), Data Connection Name: PowerPivot Data, SessionId: 1.V21.4PI+fCwIq52LH++nOoMzs90.5.en-US5.en-US73.-0060#0000-10-00-05T03:00:00:0000#+0000#0000-03-00-05T02:00:00:0000#-006036.bfceb31b-7122-46ca-9e2a-ae52cefcfcaf1.N,
    UserId: 0#.w|contoso\manager fb614a65-e398-4b97-a98d-fb7b23eab39f
    My server and client olap versions are the same: MSOLAP.5, i used sql server 2008 R2 SP1 and sharepoint 2010 SP1 and reboot or iisreset have no effect
    Thanks in advance for your help

    Hello Challen Fu
    I would be so grateful if you could please help me out
    I have been trying to find a solution to the same error message
    In my case, the power pivot reports were working before on a regular team  site , but then two things changed:
    a)  I  created a toplevel site using the BI Center template. Now I am using a Business Intelligence template , created a power pivot gallery library and uploaded a few powerpivot reports
    b)  On the  backend, the database instance was upgrated to SQL Server 2012 
         Front end Server VDSP01  remains  SQL Server 2008 R 2 where Sharepoint 2010  was installed as a FARM  
    Now, the reports will display in sharepoing however they will not refresh. the error message i get is the same.
     Scenario recap:
    a- Server VDSP01  uses SQL Server 2008 R 2 where Sharepoint 2010  was installed as a FARM
    b- On the back end,  the database instance name was replaced with SQL 2012 Server:
               from SQL Server 2008 R 2 (instance DBDEV-COTS\COTS)
               to     SQL Server 2012 ( instance VTSQL01\COTS)
    c-  I was told that:
         From VDSP01, they ran
    CliConfg.exe   to create SQL Server Alias :
           where    BEFORE: vdsharepoint -->  DBDEV-COTS\COTS
                and  AFTER    : vdsharepoint -->  VTSQL01\COTS
     I appreciate in advance any help you can provide<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
      <v:stroke joinstyle="miter">
      <v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
      <v:f eqn="sum @0 1 0">
      <v:f eqn="sum 0 0 @1">
      <v:f eqn="prod @2 1 2">
      <v:f eqn="prod @3 21600 pixelWidth">
      <v:f eqn="prod @3 21600 pixelHeight">
      <v:f eqn="sum @0 0 1">
      <v:f eqn="prod @6 1 2">
      <v:f eqn="prod @7 21600 pixelWidth">
      <v:f eqn="sum @8 21600 0">
      <v:f eqn="prod @7 21600 pixelHeight">
     <v:f eqn="sum @10 21600 0">
    </v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
     <v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
    <o:lock aspectratio="t" v:ext="edit">
    </o:lock></v:path></v:stroke></v:shapetype> <v:shape alt="" id="Picture_x0020_2" o:spid="_x0000_i1025" style="width:630pt;height:475.5pt;" type="#_x0000_t75">
    <v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\wlarange\AppData\Local\Temp\msohtmlclip1\01\clip_image001.jpg">
    </v:imagedata></v:shape>
    wanda larangeira

  • Breaking Links to and External Data Connection using the cubevalue() function

    I have spreadsheets that connect to an MSAS cube successfully and pull data in the cells using the CUBEVALUE function.
    Is there a way to perform the equivalent of 'breaking links' to the external database so that the spreadsheet can be distibuted to others that will not have the external database connection set up on their computer/excel environment.
    I find that if i email a spreadsheet with data retreived using cubevalue functions to someone without the external database connection they do not see the values preserved with the spreadsheet and end up with blank or zero cells, etc.
    I have unchecked the box related to 'refresh data when opening file'.
    In a perfect world i would like to remove the db connection and be left with pasted values, similar to breaking links to an external workbook but I am not sure if that is possible.
    I am desperate to find a way to distribute these spreadsheets and be confident that Excel won't be unsuccessfully trying to refresh a connection that isn't on other peoples computer.
    Thanks for any guidance

    Maybe you can upload a sample file to a file sharing site and then share the link with us.
    As you said you have already unchecked the option 'Refresh data when opening the file' within Connection Properties.
    When you send the Excel file to someone without this data connection, they should get the correctly data unless they click the button 'Refresh All'.
    Wind Zhang
    TechNet Community Support

  • PDF output does not refresh data in BI Publisher, XML and HTML do refresh

    I just upgraded to BI Publisher 10.1.3.4.0 and I noticed that the PDF format of the reports does not reflect recent changes in data, while XML data and HTML output do reflect changes in data immediately.
    I'm using BI Publisher to print APEX applications reports. When I change some data in APEX forms, I click again in the Print button and the data remains unchanged. I made some testing inside Oracle BI Publisher, and noticed that XML data and HTML output do reflect changes, but PDF output remains with the old data for some unknown amount of time. I cannot identify a method to force the PDF to refresh, just un-log and log in again several times until the data appears updated. This is serious because when users change data and print again, they expect the changes to be reflected in the new printable report, and may not notice that the data is the old version.
    OS is Oracle Enterprise Linux.
    Any help on this will be very welcome.
    Francisco

    Open the report in Edit Mode Click on the reports and in the properties section Uncheck the
    Enable Document Cache Property and your issue should be resolved.

Maybe you are looking for