VBA Project Export Resource data vith TimeScaleData ON FILTERED TASK

Hello,
I have been using the common code you can find at the following website to export resources data using the TimeScaleData function :
http://zo-d.com/blog/archives/programming/analyze-microsoft-project-resource-usage-data-in-excel.html
It works fine. Now, I need to do the same export but at the same time, I need to filter some tasks by a specific value in the Text1 column for example. Thus, I would like to extract the resources data, not on the all tasks, but only on filtered tasks.
How is it possible ?
I tried to setup a filter by VBA, but the filter is not take in account. The TimeScaleData retrieved the value of the all tasks and not only of the filtered tasks.
FilterEdit Name:="Filtre 3", TaskFilter:=True, Create:=True, OverwriteExisting:=True, FieldName:="Texte1", Test:="Égal à", Value:="TITI", ShowInMenu:=True, ShowSummaryTasks:=False
FilterApply Name:="Filtre 3"
Can you help me ?
So sorry for bad English.
Thank you.
Emmanuel

Emmanuel,
Jack's macro loops through all the resources but your filter is a task filter, so even though you may see the filtered Gantt Chart view, the macro still exports all resource data. What exactly do you want to do?
John

Similar Messages

Is there any way to export IT Resource data from OIM using the export tool?

Hello,
we are trying to migrate an OIM development environment to a preproduction environment and we need to migrate more than 400 IT Resources. We have exported some IT Resources and when we imported them in the preproduction environment their data was not migrated. Is there any way to export IT Resource data from OIM using the export tool? Or is there any other way to do this without doing it by hand?
Thank you for your help
Kind Regards

Well , OIM doesnot provide any such facility to export ITResource data along with ITResource .
Directly updating the DB could be an option ..
Thanks

I need to be able to export the data from health kit and read it in something. Anything.

I've tried pretty much everything from Excel to downloaded and online apps. I'm done downloading crap to my brand new computer. My problem is that I need to be able to export the data into a readable format so that I can give it to my dr(s). Is there ANY WAY that this is possible? I'm kind of at my wits end here. All help/suggestions are appreciated.
What I've done:
1. Exported data. It creates an xml file that can be opened in excel but gives raw data that no one but egghead developers can read (and I use that term in the best possible way.)
2. Tried to download an excel add on. Didn't work.
3. Tried several online applications. Same result as Excel.
Somehow this data has to be able to be read by someone other than myself, on my phone.
Thanks to one and all for the many, many suggestions that I'm about to get.

sam.loomis1234
The only way out of Premiere Elements 11 is via export in video format (except for jpegs or audio under Publish+Share/Computer/Image or audio).
The video is whole, not in a project file (project.prel).
And, the Premiere Elements 11 project.prel does not appear to be an After Effects supported project format
http://helpx.adobe.com/after-effects/kb/supported-file-formats-effects-cs4.html#main_head1
Have you asked this question in the Adobe After Effects Forum regarding supported formats?
http://forums.adobe.com/community/aftereffects_general_discussion
ATR

Error "Encountered an error while exporting the data. View the lof file (DPR-10126)

Hello,
I would like to have sugestions and help to solve a problem in IS 4.2.
I've created a view from two tables, joined together with the key from each one.
Then i've binded the rule with the view (mentioned above) created and calculated score for it.
The calculation is successful, however when i try to export all failed data i have the following error:
"Encountered an error while exporting the data. View the lof file (DPR-10126)"
When exporting failed data from calculations made directly to the datasources i do not encounter any problem, but when i try to export all data to CSV file (not only the 500 results limit) i have this kind of error.
However, when i visualize the data from the view created, it is also possible to export to csv file.
Resuming, the error occurs only when exporting all failed data from the view.
Can anyone help with this issue?
Thx
Best Regards,

Hello,
Your information is correct.
I've just confirmed it in the 4.2 SP3 Release Notes and they specifically refer to this issue.
A user who has 'View objects' rights for the project and a failed rule connection cannot export the failed data. This issue has been fixed in this release.
Thank you very much for your input.
Best Regards,

What is the best way to export the data out of BW into a flat file on the S

Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- Shashi

Hello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA)

Project Online Resource Plan issues_Many

I am trying to setup a client that only wants to use Project Server for portfolio planning and analysis. In this scenario they only want to assign generic resources (remember, no detail plans...only high level), and want to use the resource plan. Sounds
simple, but I am finding a lot of issues with this scenario, primarily with resources plan.
1. The resource plan seems to be checked out with no way to check it in other than through the force check-in. On occasion it seems to get checked in but I can't figure out the steps. I've tried with and without editing and publishing the
project itself with no avail. Sometimes the Publish option is still available (but I assume it wouldn't be if someone else checked it out) but sometimes it is greyed out.
2. I can't assign capacity to a generic resource and use it in Portfolio Analysis. This seems to be a feature that in my opinion was poorly conceived, but I'll leave out the details of this rant.
3. and biggest issue which is definitely a bug and show-stopper. Changing the date rage of an existing resource plan doesn't change the resource demand for a date range that was cut from the original. I can back the start date or extend the end date,
but cannot move the start date or end date in. What happens is that the grid changes just fine but the resource date range along with the demand for that time no longer in play still show up as project demand.
I added this to the Project Online forum but all of this behavior is the same with Project Server 2013. Nothing I could see in the forums. Is this a new bug or can there maybe be a fix on the way? Any comment or update would be greatly
appreciated.
Thanks...
Larry Christofaro, PMP, MCITP

msayani2 --
Firstly, all of your people and machines need to b entered in the Enterprise Resource Pool. For each of the machines you list, enter a Max. Units value that represents 100% multiplied by the number of machines you have. For example, if you have
three road graders, you would enter 300% in the Max. Units column for a Road Grader resource.
Next, you will need to build enterprise projects, add the required people and machines as team members in the project, assign the resources to each task as needed, and then save and publish each enterprise project.
To see how the workload is distributed for your resources, navigate to the Resource Center page and select the resources whose assignments and availability you want to study. At the right end of the Resources ribbon, click the Resource Availability
button. On the Resource Availability, select the time range you want to use and you can then see the availability of your selected resources. You can also click the Resource Assignments button to study how the resources are being used on tasks
across all projects in Project Server.
Hope this helps.
Dale A. Howard [MVP]

Exporting CLOB data w/Oracle 8i

Is there a way to export CLOB data from a table to an external
file in a directory of our choice??? Our application
specification is asking us to build this capability but I am
unable to find any way to do this. Any assistance would be
useful. Thanks a million!!
null

OCI really seems like the right way to do this. You know you have to use something like C to interact with the port. And the only Oracle stuff you are doing is an insert. You could even write the insert in a stored proc and call it from OCI. Below is an example of that. You should really give OCI a shot at this. I'm certain you can learn enough of it for this project.
http://download-east.oracle.com/docs/cd/B10501_01/appdev.920/a96584/oci05bnd.htm#433702
Tom Best

How to export Resource Graphs/Profiles to Word or Excel

We are using Primavera Risk Analysis 8.x and we could not find an option on how to generate reports showing resource profiles or how to export them into another software. Has anybody came across such an issue?
Thanks in advance
Chris

As with other Primavera products you can export most data fields out to MS Excel or Word or Access in order to better customize your reports. Charting in Excel is far better for your graphical reports :) If not, you could always import that data back into P6 and run your resource profiles in that software.
~~~~~~~~~~~~~~~~~~~~~~~~~
Exporting using Export View Contents commandThis method of export is excellent for getting selected information out of Pertmaster for manipulation or viewing in other packages.
You can use the Export View Contents command from the Gantt Chart or the Resource Sheet.
Using Export View Contents from the Gantt Chart saves the information displayed in the current columns and the column headings.
Using Export View Contents from the Resource Sheet saves the information on the usage of the displayed resources between two user defined dates.
To Export View Contents from the Gantt Chart
Set up the Gantt Chart columns to display the information that you require. Apply a filter if you wish to export only the information of certain tasks.
View | Export View Contents.
Type in the filename. Click on OK.
To Export View Contents from the Resource Sheet
Add the required resources to the resource sheet.
View | Export View Contents.
Type in the filename. Click on OK.
Enter the export date range. Click on OK.
To Export View Contents from the Resource Graph
You cannot export directly from the resource graph. So add the required resource to the resource sheet and then use export as described above.
Was this answer helpful?? If not, just email me back
Thanks,

Export As Data Feed

Hello,
I am trying to find a way to add the export as data feed button to my SharePoint list - connection (subcategory). From my research this is normally done with procedures using "SharePoint Central Administration". However, I am using
the Office 365 Trial of E3.
I want this feature so that I can start to sync feeds to Pivot Point and get a sample dash going.
Any advice?
Thanks in advance,
Kent

Hi Kent,
Office 365 Enterprise 3 have PowerPiovt feature, if you activate the PowerPiovt feature, ‘Export as Data Feed’ will be available.
I am not a SharePoint Online expert, and in general, you can activate the feature in Site Collection Administration.
1.Open your site
2.Click Settings on the top-right of the page, and click Site settings
3.Click Site collection feature under Site Collection Administration
4.Scroll to PowerPiovt feature, and check if the status is Active. If not, Activate it.
If you use Excel 2013 client to read data feed, I recommend you use Power Query to read the data, or more easily, you can use excel to read the data directly.
Here is an article for you to take a look at :
http://office.microsoft.com/client/15/serverhelp/preview?AssetId=HA104103589&lcid=1033&products=WSSENDUSER&CTT=5&origin=HA102835634
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to export image data into XDP

Hi, All
I'm working on a healthcare project that needs to export the doctor's signature image into XDP file from the database to fill in the Insurance company claim form. My question is how to export image data into a field node in the XDP file, we know the name of the image field which defined in the PDF form, Is it something like:
the signature image data ?
Should the image data in this node be base64 encoded or text encoded or something else?
Can the image be any kind? e.g. BMP, PNG, JPEG, ..., etc?
Thanks
William

Hi Andre,
Document will be of ASCII characters right?? but image data will be in binary format. as per database concept it is stored as binary large object. But in datawarehousing the back end is also going to be some database such as Oracle or other DBs.
which can take blob's. so it would be possible to store the binary data.
If any one has faced this situation can reply.to this ques.
can post the step to load image(jpg/bmp or any image format) data in to info cube??
hi andre if u have done loading image data as you say.pls reply me if you have the steps with you.
thanks Andre

Export dump+date

Hi,
Linux 5.3
Oracle 11g
Im exporting my schema and put it on cron script to run every 1AM.
exp hr/hr@prod1 file=/u01/backup/hr_%date%.dmp log=/u01/backup/lhr_%date%.log rows=yHow can I capture date in format YYYYMMDDHHMI?
Thanks

843228 wrote:
can you give me sample script pls
[oracle@wissem ~]$ cat exp.sh
#!/bin/ksh
TODAY=`date +%m%d%y:%H%M`; export TODAY
exp "'/ as sysdba'" file=DMP.${TODAY}\
   full=y \
   rows=y \
   log=LOGFILE.${TODAY}
[oracle@wissem ~]$
[oracle@wissem ~]$ chmod 777 exp.sh
[oracle@wissem ~]$ ./exp.sh
Export: Release 11.2.0.1.0 - Production on Wed May 4 13:56:10 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
About to export the entire database ...
. exporting tablespace definitions
. exporting profiles
. exporting user definitions
. exporting roles
. exporting resource costs
. exporting rollback segment definitions
. exporting database links
. exporting sequence numbers
. exporting directory aliases
. exporting context namespaces
. exporting foreign function library names
. exporting PUBLIC type synonyms^C
[oracle@wissem ~]$ ls
-rw-r--r-- 1 oracle oinstall    81920 May 4 13:56 DMP.050411:1356
-rw-r--r-- 1 oracle oinstall      891 May 4 13:56 LOGFILE.050411:1356

Using a VBA project as a Template

Hi, I work in a company where we use a new program called SolidWorks Inspection that takes an Excel Template and a Drawing then
creates an Inspection report on an Excel spread sheet. I wrote a VBA code that will extract information from the user and input them in their places on the spread sheet. I made this VBA code on the Template and saved it. Solidworks Inspection exports
the information into that template creating a spread sheet. i saved my work then opened it back up to run the VBA project but it is not there anymore only the Button that i made to run the program is there but the actual Modual disappeared.
The question here is can I write a VBA code that can be saved as a template so that whenever i use it on anything my code will be ready to go with a click on a button?

When the corporation I work for, changed all PCs to Win7 Pro x64 & office 2010, I had macros disappear after creating new code in personal.xlsb (local VBA project file). Maybe
a ' trusted document' and or 'Trusted Location' (network folder?) issue
Your IT department may need change their standard Policy for all users, to allow saving code to a 'trusted location'.
Mark

Export the data of Essbase using ODI11

Hi,
I want to export the data of essbase using odi 11.g ,and store in the oracle database;
But i got a issue that i haven't got the whole information,which just have the value of data column,and null instead of the Dimension Members ;
The DataSet as the below:
Account,Period,Year,Entity,Project,Data;
Null,Null,Null,Null,Null,5231.212
Null,Null,Null,Null,Null,6231.231
Null,Null,Null,Null,Null,NULL
I have check the below ways:
*1.Essbase Report*
http://ServerName:27130/easconsole/console.html
Execute the report script:
//ESS_LOCALE SimplifiedChinese_China.MS936@Binary
<Sym {SUPALL}{TABDELIMIT} {NAMESON}{ROWREPEAT}{NOINDENTGEN}{SUPMISSINGROWS}{MISSINGTEXT "0"}
<COLUMN(Scenario)
{DECIMAL 8}
"BUDGET"
<ROW(Account,Period,Year,Entity,Project)
<DimBottom "Account"
<DimBottom "Period"
<DimBottom "Year"
<DimBottom "Entity"
<DimBottom "Project"
Result:
Account,Period,Year,Entity,Project,Data;
ACC1,1,FY13,ORG1,PRJ1,5231.212
ACC2,2,FY13,ORG2,PRJ1,6231.231
ACC3,3,FY13,ORG3,PRJ1,#Missing
*2.odi Interface*
LKM Hyperion Essbase DATA to SQL
EXTRACTION_QUERY_TYPE:ReportScript
EXTRACTION_QUERY_FILE:C:\odifile\budgetdata.txt
EXT_COL_DELIMITER:\t
*3.oracle table*
The data type oracle 's table ,the data is NUMBER,other is NVARCHAR2(80);
Anyone can help me ,thanks
Kevin
Edited by: kevin123 on 2013-4-17 下午11:03

Who has experience in this field,thanks

How can I export the data that consultant have configured?

I have installed the same systems at two server machine. The consultant have configured something in one server and the developers have developed some projects at the same server, after that, I want to export the data that the consultants configured without the developed projects and import it to another server. How?

Certain objects can be put into an application designer project, and then exported to file or migrated to another environment. Examples include process scheduler server definitions, integration broken setup, security, and trees. Basically anything you can add through application designer using the Insert > Definitions into Project list. This is the better way but doesn't work for everything.
Do you know specifically what was configured and what you need to export? There's a DMS script that lives under PS_HOME/script called mvprdexp.dms that lists the core PeopleTools tables, which might be useful if you do have write your own DMS.

Exporting table data to MS-Excel Sheet(enhanced Web Dynpro Binary Cache)

Hi experts,
I am trying to implement the functionality of downloading the contents of a webdynpro screen to excel sheet. In order to implement the functionality of excel download i used the following blog.
[/people/subramanian.venkateswaran2/blog/2006/08/16/exporting-table-data-to-ms-excel-sheetenhanced-web-dynpro-binary-cache ]
In this blog they have used javaexcel api to implement the excel functionality. I face some problems
while implementing it.
i) The use of "Label label = new Label(0, 2, "A label record");
sheet.addCell(label); " is not supported. It says that a constructor for label with
(int, int, str) parameter is not available.
ii) Then i implemented it with "Label label = new Label("A label record"); " Then i deployed it. I got a runtime exception saying that " java.lang.ClassNotFoundException: jxl.format.CellFormat ".
This cellFormat is an interface available in the jar. I am using jexcelapi_2_6_9_1.4 version. Do i have to
download some other versions.
Please help. Thanks in advance.
Regards
Ramanan

Hi,
Please check the following steps while creating External Library DC:
1) creating an Extneral library DC
2) import the JARs to the libraries folder of the External Library DC project
3) Right-click on each of the JARs imported to the project and add them to the public part.
This DC is now ready to be used as a build-time reference that will allow CBS to build the "main" Web Dynpro application that will use the external libraries. Next, we have to create a new Web Dynpro DC to hold the class files here are the steps:
1) Create a new Web Dynpro DC
2) Create a new public part, selecting the "Can be packaged into other build results" option
3) Rename the JARs as Zip files and extrct the full content (folders and class files) to your root folder
4) Import the folders and files to the src/packages folder
5) Expand the public part node that was created and select the "Entities" node, right-click it and choose Edit
6) In the Entity Type list select the "Folder" option then in the selected entities tree pick each of the folders that you imported in step 5 (above)
7) Now do a DC build and a DC deploy of the project
Then check-in, activate, and release any activities you have associated with creating these two projects. In the DC perspective, refresh the Active DCs and Inactive DCs to ensure that both new DCs appear in the Active list. Now we have to setup the references to these DCs in our main Web Dynpro application. To do this, follow these steps:
1) Open the Web Dynpro perspective and right click the Used DCs node then choose "Add Used DC.."
2) Pick the public part of the External Library DC that we created (first) and set it to have a Build Time dependency
3) Again, right click the Used DCs node and choose "Add Used DC.." then choose the public part of the Web Dynpro DC that we created and give it a Run Time dependecy (weak) and click finish.
4) Now, due to what I think is a bug. You must right click on the Web Dynpro "used DC" that you just added in the previous step, and set the run time dependency again (it seems to revert to the default values for some reason)
5) Now do a DC build and a DC deploy on the "main" web dynpro application.
6) Check-in, activate, and release any activities associated with adding these references and then others on your team may use the classes in the external libraries within the Web Dynpro project.
Regards.
Rajat

VBA Project Export Resource data vith TimeScaleData ON FILTERED TASK

Similar Messages

Maybe you are looking for