Vba to read and reply my email automaticaly by reading subject

Have you looked into Outlook Rules?

hi
i want vba to automatically read the subject line and body of an email and reply to the email and also attach a file * this file could be diiferent to differnt emails
regards
viraj
This topic first appeared in the Spiceworks Community

Similar Messages

Public Folders Assistant not forwarding and replying to emails

Hi All,
We have an issues with our Public Folders Assistant not forwarding and replying to any emails. This was working with EX2007 for 6 years and EX2013 for the last year. All of the sudden all of the mail enabled PF stopped working. We can receive emails but
that is it. Can't find any event logs pertaining to this issue. We have not installed any Windows or Exchange updates prior to this happening. We use Office 2010 and 2013.
Windows 2012 r2
Exchange 2013 CU6
Thanks
Mark

Hi,
Do you have public folders in Exchange 2007?
In Exchange 2007, you can increase logging level for "MSExchangeIS\9001 Public\Rules" to a higher level. In Exchange 2013, this event is removed.
Besides, please try to change the conditions for public folder assistant rule to check result.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Automator and replying to emails

I have students submit assignments in email. When I get the assignment I like to reply with a simple "Got it" in the text to let them know I did receive the assignment. I would like to make Automator or Applescript make this less typing intensive when I have a couple hundred of these to handle. I would like to be able to run an action or script that would reply to the front-most message and put "Got it" in the text and then send the message. I have a default signature, so I assume that would get included. Can anyone point me in the direction I need to go. I have played around with both but have not found the correct avenue of approach. Thank you in advance for any advice you can offer.

jzents,
Try this either as an AppleScript or an AppleScript
action within Automator. This will work with either a
selected email in the browser or the frontmost window
of Mail. The way I have my preferences the signature
didn't seem to automatically appear so I have added a
small section to add it below the "Got it" just
incase you find the same. Adjust the content as
needed.
click here to
open this script in your editor<pre
style="font-family: 'Monaco', 'Courier New', Courier,
monospace; overflow:auto; color: #222; background:
#DDD; padding: 0.2em; font-size: 10px;
width:400px">property mySignature : "Firstname
Lastname" & return & "Street Address" &
return & "City, State/Province" & return
& "Zip/PostalCode Country"
tell
application "System Events"
tell process
"Mail"
set frontmost to true
click menu
item "Reply" of menu 1 of menu bar item "Message" of
menu bar 1
keystroke "Got it" & return
& return & mySignature & return
click menu item "Send" of menu 1 of menu bar item
"Message" of menu bar 1
end tell
end
tell</pre>
PowerBook 12"
Mac OS X (10.4.7)
I say! I say! That script is wonderful. I would have never guessed that I needed to embed the tell Mail inside the tell system events. I also had no idea how to tell what was the menu calls to use. I really appreciate it, not only does it do it if the message is open in a window of its own, but even if the message is selected. Thank you very much! Cheers!

How do I set Tbird 31.5 to show options for using italics, boldface, etc. in composing and replying to email? Have been using Tbird for years and can't get it.

I really have been using Tbird for years and I can't get the options for italics etc to show when composing or replying. I'm an editor looking for job so this is relevant. Please save me from Outlook. Thanks.

I believe you can specify italics by putting a slash before and after the text, bold is done using asterisks before and after text, and underline is done using the underline character before and after text.

How can I get Thunderbird to maintain the font I selected to compose and reply to email?

If I type exactly right the first time, the font is OK. But, if I make a correction or addition, the font resets to "VARIED" size and something other than Cambria. I prefer the look of Cambria or something where the number "1" and capital "I" look different from the lowercase letter "l". Thanks for any help!

my short answer is press enter 4 or 5 times as soon as you get into the editing area and then use the mouse to move the cursor back to the beginning. Not the best, but certainly the easiest way to gain some control.

Just upgraded and cannot send or reply to email

I just bought a MacBook Pro (15"/216gHz/2gig ram) and transfered everything via firewire from my old PowerBook G4. When I attempt to reply or forward email, I click on the button (or use the menu) and absolutely nothing happens. I can click compose and get a new email screen, but when I click to send nothing happens. I receive email without troubles from all my accounts. I have no problem sending and replying to email with my old G4 (and the other computers on my Airport network - so it's not the network) and all the preference settings for my accounts are identical. Any ideas or assistance?

In the other thread where you posted about this problem, I suggested you to reset Launch Services. Have you tried that or not?
I’ll repeat it here in case someone else having the same problem comes accross this thread. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
Resolving Disk, Permission, and Cache Corruption
The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Go to Maintenance > Reset and check LaunchServices database.
4. Un-check any other pre-checked options.
5. Click the Execute button.
6. Restart the computer.

Outlook Calendar Email Display Name and Reply to Name

I need help to change the display email address and reply-to-email address used when I create and send calendar invitations from Outlook.
Here is my setup.
I am using Outlook 2013 that is connected to an Exchange server.
I have 2 email systems.
My main email system is NOT using Outlook. All of my emails flow through, as an example, [email protected]
Outlook is used only for my contacts and calendar. For this email let's call it [email protected]
Right now when I send a calendar invite it comes from [email protected] and the reply-to-address is [email protected]
I would like the "from name" and "reply-to" name for all calendar invites to be displayed at [email protected]
My [email protected] will redirect all calendar invites to [email protected]
How can I configure Outlook to do this?

So to my understanding there are 2 different email systems: one handling the @email1.com, based on Postfix/sendmail/Exchange/<other mail server> and one handling the @email2.com based on Exchange.
If you add an accepted domain in your Exchange organization - @email1.com - then you'll be able to add the [email protected] address to the list of email addresses stamped on your Exchange mailbox. Following this, the recently added address can be specified
as reply-to address (Primary SMTP Address). On the other email system, you'll have to use @email1.com as an internal relay accepted domain (similar to the notion described
here) and configure a connector to send email to the Exchange organization for @email2.com. As for the forwarding itself - if that system is also Exchange - the 'targetAddress' attribute could be used, which will instantly forward the email to the '[email protected]'
value that should be stamped inside (see
this link); if a different email system, then the equivalent feature of 'targetAddress' should be used.
Yet the whole setup is cumbersome to say at least. Could you give more details about what is it you're trying to achieve at a higher level ?

I can send or reply to emails from home, but not when traveling

I can send emails and reply to emails when I'm here at home in California. Just got back from Florida where I could neither send or reply to emails. The same thing was happening on both my and my wifes 3gs phones. Ideas?

I had the same problem starting yesterday. I fixed it by turning off wifi when not at home. Now I can send and reply to e-mail.
I have found that if I leave the wifi on, the phone will keep trying to connect to the mail servers and drain the battery making the battery life problems MUCH worse. Not sure what will happen now that it has to use the cell network for all e-mails.

Viewing & Replying to Emails

Can you view and reply to emails on your normal email account provider on the Ipod Touch 64GB? Can you also view open and view attachments?

It should open a new blank e-mail for replying. If not you may want to consider a restore. There may be an issue with your Mail application.

Cannot reply to emails! Relaying??

Downloaded I OS5 and now when I try and reply to emails on my iphone it says it has been rejected because the server does not allow relaying. What does this mean and how do I fix it??

Downloaded I OS5 and now when I try and reply to emails on my iphone it says it has been rejected because the server does not allow relaying. What does this mean and how do I fix it??

Vba to read and reply

i want vba to automatically read the subject line and body of an email and reply to the email and also attach a file * this file could be diiferent to differnt emails
regards
viraj
This topic first appeared in the Spiceworks Community

hi
i want vba to automatically read the subject line and body of an email and reply to the email and also attach a file * this file could be diiferent to differnt emails
regards
viraj
This topic first appeared in the Spiceworks Community

Arbitrary email addresses in send and reply fields

I have been trying to figure this out for a while, so apologies if it seems obvious. I have a domain foo.com and use many different addresses [email protected], [email protected], etc to distinguish mail from different senders. For example, if I set up an account at amazon I give an email address of [email protected] to allow simple spam filtering and categorization. Then I open a gate in mac mail by adding a rule saying allow mail to "[email protected]". All these addresses (and there are MANY of them) are directed through a single account by my host service. Though the "to" field distinguishes them, the account they come in under is associated with an official email address of "[email protected]".
Sometimes I need to send an email from one of these addresses. In particular, certain sites require an email+reply confirmation process which demands that the reply come from the [email protected] address. Often the original is sent via a web form, so mac mail plays no role. In mac mail, I can set the default to reply from a fixed address (from the list of official account email addresses) or from the official address of the "account" I last looked at, etc. I can also select from a pull down list of the official account email addresses. However, without adding a bzillion email addresses to the list by hand (and selecting or changing the prefs each time), I can't seem to simply modify the reply-from address or the sent-from address to be arbitrary. I want to do 1 of 2 things:
1. Easily and directly edit the sent from or reply from field of a single email without changing any default settings or going into a preferences pane.
or 2. Set a default of "reply-from" the address to which the email was addressed (rather than the account).
I imagine the 2nd is problematic because there is no way to identify the address which is "me" in the recipient line if it is not known (like the "official" account address). I know how to do the 1st with sendmail, but that kind of defeats the purpose of using mac mail for integration.
Does anyone know how to do this?
Thanks in advance for your help.
Cheers,
Ken

Thanks for the reply, but that doesn't quite help. I don't want to have to go into preferences and add a new address each time I reply. There are over 100 of these addresses and most get used infrequently. I want to simply edit a field in the email directly. The drop down menu solution doesn't work with a large and constantly growing set of addresses. Imagine you have [email protected] through [email protected] on your domain bar.com. If you get an email addressed to [email protected] you wouldn't want to have to go into preferences and add that to the allowed list before being able to reply. I want to simply reply as [email protected] There are legitimate reasons to set stuff up like this. I just want to be able to edit the "from" field in an email message the same way I can edit the "to" field. It would be equally frustrating if I had to go into preferences to add a recipient's email address every time I wanted to send one out.

TS3899 Why can't I reply to emails on my iPhone 5 - this is a recent problem, I have been able to reply and delete email messages previously.

Why can't I reply to emails on my iPhone 5 - this is a recent problem, I have been able to reply and delete email messages previously.

A bit more information would be needed to understand what's going on?
What happens when you try to reply... Do you get an error message, is there no send button, does a symbol appear?

My os doesn't support upgrade of firefox but now can't reply with emails on hotmail or open pics and other applications with older firefox. How to solve this?

I have an older imac. It works well but I can't open a lot of files/applications or even reply to emails on updated hotmail version. My os is 10.2.8 and I am using 2.0.0.20. My OS can't handle later versions. I can't buy latest upgrade from MAC (snow leopard or whatever latest is) because my computer not compatible with higher/newer upgrades. I want to use my computer but be able to have hotmail work and open pics etc. I don't know what to do.
== This happened ==
Every time Firefox opened
== Today is when I can no longer reply with hotmail, they ask me to upgrade to newer but need higher firefox to do so.

Following the Hotmail update by Microsoft, they have dropped support for Firefox 2, and now require at least Firefox 3, which will not run on your OS. Hotmail now requires at least Safari 4 so that is not an option for you either.
There are a couple of browsers you could try, they are not specifically mentioned on the system requirements for Hotmail so I can not guarantee that they will work. The first is [http://www.opera.com/download/?os=mac&ver=9.64&local=y Opera 9.64] (Opera 10 will not run on your OS) and [http://www.icab.de/dl.php iCab 4.8]

TO and REPLY TO fields replaced by recent email client address no matter what I do. Help please?

I own a yahoogroips list and keep the emails since 2009 in a MAIL folder.
A new member at the list with whom I am chatting ON the list, joined 2 days ago. HER email address is now appearing in place of the list address in the TO and REPLY TO fields.
It has replaced those fileds in ALL the emails in my folder from 2009 top now!
Also when I try to address an email to the list address, it automatically gets replaced with the new memebr's email address.
That is so even if I disable auto copleting of addresses.
I can type the list addresws, but as soon as I leave the TO field of the new emails, the address changes to the new memebr address.
PLEASE - HOW did this happen - and HOW do I get it to UNHAPPEN?
MANY thanks for any advice, it is driving me bananas.
(THe list is in urgent use for medical emergency discussion re animals)
Namaste,
Irene

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

Vba to read and reply my email automaticaly by reading subject

Similar Messages

Maybe you are looking for