VC IN MTS

Hi All,
Can I know any possibility of implementing Varinat configuration with Make to Stock Scenario
Please let me know the configuration for MTS scenario.
thank you
regards
Arun Prasad

Hi All ,
Thanks for all your support. Got the answer. Please find below explaniation which I found after analysis
Within SAP ERP it is not possible to change Material configuration if you make to stock. Only within the DIMP-ADD-On it is possible. But with some restrictions. The system allows configurable make-to-stock production for materials managed in batches only if APO integration is active.This restriction is provided because APO integration is required for characteristics-dependent planning to function correctly. The R/3 MRP does not control characteristics-dependent planning. Requirements and receipts are offset against each other regardless of characteristic value assignment. There exist no plan to change this behaviour in thefuture. (Answer from the Solution Management of IBU Mill Products) The relevant check is in Function Module CO_OCC_CMTS_ALLOWED_CHECK If you change the coding it is posssible to have the behviour like MTS. This is a possible way but the user must work very carefully with this possibilities. There gives critical and some uncritical
characteristics in a configuration with concerning the production. If you can ensure that only uncritical characteristic will changed in the production order the modification will work fine.
Modification code:
IF l_xchpf IS INITIAL OR
l_apokz <> '3'.
APO-relevancy and obligatory batch management are
necessary preconditions for a make-to-stock order
for a configureable material
EXIT.
ENDIF.
If you comment "l_apokz <> '3'." you allows make-to-stock production
RESULT : We to modify the program to enable MTs in VC scenario. The modification and fuctional module is given above
Edited by: arun prasad on Jul 30, 2009 6:14 AM

Similar Messages

MTO e MTS no mesmo Material

Para entender todo o contexto, antes deem uma olhada na discussão abaixo.
Production in specific plant
O cenário da discussão anterior funcionou. Agora preciso saber se é possível configurarmos o material para se comportar da seguinte forma:
Obs.: para simplificar o cenário, vamos continuar com o foco em apenas dois centros: 1000 (que demanda) e 1800 (que produz).
- Para o material ABC, eu posso ter produção MTO (configurada) e também MTS (a partir de um ponto de reabastecimento). A produção MTO foi a que discutimos neste fórum e vimos que funcionou corretamente (o centro 1000 gera a demanda, e o centro 1800 produz, transferindo o estoque para o 1000 no final da produção). Gostaria de saber se tem como configurarmos esse material para disparar uma ordem planejada assim que o ponto de reabastecimento for atingido no centro 1000 (neste caso, a produção não é configurada, apesar de o material estar marcado como configurável).
Eu alterei o tipo de MRP do centro 1000 para VB e indiquei o ponto de reabastecimento. Porém quando rodei o MRP ele gerou a ordem planejada mas não deixou converter para ordem de produção. Foi gerada a exceção "52" (Não foi selecionada qq LisTéc)... como não foi selecionada uma LT, a ordem planejada não está com o campo "Código de conversão" marcado.
Obs.: o Grp.Estratégias do material é 20 (produção sob encomenda), mas esse grupo está configurado para aceitar a estratégia 40 também.
Saberiam me dizer o que pode estar errado?
Desde já, obrigado!
Willian.

Boa tarde Jean,
Não posso te passar mais detalhes no momento, mas o comportamento do programa é o esperado.
Solicite que a sua equipe fiscal leia a respeito no Guia Prático. A nota deve ser escriturada integralmente.
O que diferencia os itens (para contabilização do bloco M) neste caso é o CST.
Ex. (verifique os CSTs corretos com sua equipe fiscal):
Item 10 CST 98
Item 20 CST 54
Na escrituração dos registros F120/F130, ao escriturar o crédito relativo ao Item 10 você usa um CST de crédito (54, por exemplo).
Att.,
Charles

What is the best app to convert MTS videos to MP4?

I'm looking for a good and high quality program that can convert MTV format to one the iMovie can read.

why do you want to 'convert' it?!
iMovie08-13 import AVCHD (in which mts is embedded)
and iM13 imports 'orphanized mts' (=if the intact AVCHD-structure got lost for any weird reasons...) alone.

How to import mts from hard drive

Hello,
I'm looking for some help on importing .mts AVCHD files into FCP X direct from my hard drive. I have a lot of files on the drive that aren't on my Panasonic GH2 memory card so I can't import direct from camera. If I try to put the files back onto a memory card with the Panasonic GH2 directory structure it doesn't see them there either.
I've tried re-wrapping to .mov and the .mov file will play perfectly in quicktime but when I bring it into FCP X it plays back with occasional green frames ever 2-3 seconds. I've checked that the frame rate is correct in the project and with the clip.
I don't mind re-wrapping the files as it's quite quick but even that's no working. I could convert them all to prores but that will take quite some time and once again I'd rather avoid!
It seems that FCP X is still not quite right despite the last two updates. I've had to stick with Premiere Pro for serious work as FCP X isn't reliable yet but I really wanted to test out the new multi cam editing.
Any advice or help would be great.

I've tried re-wrapping to .mov
What did you use to do this? Did you use ClipWrap, Media Converter, something else?

Is editing HD (.mts files) on a laptop possible?

Hi folks,
I have recently purchased a CANON Vixia HF20 camcorder with an internal harddrive that outputs ".mts" files.
I own a DELL Inspiron 1525.
My processor is an: Intel(R) Pentium(R) Dual CPU T3400 @2.16GHz 2.17GHz
Memory (RAM): 3.00Gb
System type: 32-bit operating system
Windows Vista Home Premium
I've used Adobe Premiere Pro in the past (non-HD files not on this computer) and enjoy it thouroughly.
I was hoping to use it again, but the specifications seem to suggest my processor speed is too slow.
I'm looking for some advice:
1) Will CS4 operate on this computer? And if so, would I be able to edit the .mts files?
2) Is there anything I can do to this laptop (upgrades/hardware purchases) that I can do that would enable me to edit these files?
3) If this isn't going to work, do you know of other editing software that I could use to edit .mts files on this computer? (I'm reluctant to purchase a desktop after recently buying this computer).
Your insights would be most appreciated. My thanks in advance.
Kind regards,
Kyle

Hi Bill,
Thanks so much for your great suggestions. I am a bit confused about your hard drive suggestion: Is "A 3x I/O w/ SATA connections and 7200 RPM speed" an internal or external drive? I bought the laptop with an eSATA external drive connection. If I hook up an external 7200 rpm eSATA hdd, could I expect better performance? Should I copy the avchd files to it for editing? Where would you write the preview and other temp files, and does it matter? do I have control over that? Other page and virtual memory assignments?
Finally, if I pre-process the AVCHD files through Adobe Media Encoder and convert them to some other HD format first, will I have better luck editing? Which formats -- of those available in Premiere/Encoder -- would you recommend? I know transcoding is an extra step, but that might be the price of remote editing with the laptop.
Thanks again,
Lance

Bizarre problem trying to import .MTS (AVCHD) files into PSE7 Organizer

Hi
b Summary of problem:
*I recently upgraded to PSE 7 / PRE 7
*I am trying to import .MTS (AVCHD) files into the PSE7 Organizer
*I get a "...did not contain any supported file types..." error on attempted import
b HOWEVER...
*I can edit same footage in PRE7
*This footage is automatically added to the Organizer
*I can play this footage in the PSE7 organizer but generating thumbnails takes ages
*Camera: Sony HDR SR12 producing .MTS files (full 1920x1080i HD)
*PC: Intel Core i7 940 CPU, 6GB RAM, RADEON HD 4870 512MB
*OS: Vista 64 bit
b Detail:
I have recently upgraded my PRE/PSE bundle to ver 7 primarily because the new version of PRE boasts support for AVCHD.
Having installed the new software I quickly tried editing footage in PRE7 with video taken on my Sony HDR SR12 camera (footage taken in full 1920x1080i HD) and it works! Hoorah! I can now finally edit AVCHD footage in it's native format using PRE. Thank you Adobe!
But my joy was very shortlived because when I tried to import some other footage from the same batch into my PSE7 Video Catalog it wouldn't work. I got a pop up box containing the following error:
i "Nothing was imported. The file(s) or folder(s) selected to import did not contain any supported file types, or the files are already in the catalog."
Under this message is a list of the files that I tried to import. Next to each one there is a reason (it's the same reason for each clip):
i "Reason: The file is damaged or is a format that cannot be included in the Organizer."
To import files I use the following method: File / Get Photos and Videos / From Files and Folders
HOWEVER, the files that I imported directly into PRE7 in order to edit them have (surprise, surprise!) automatically been added PSE7 Organizer's Catalog. It takes a quite a while to generate a thumbnail for each clip but it does eventually do it and when it does I can play that footage in PSE7.
Just in case you're confused by this stage... If I try and manually add files to the PSE7 Organizer it doesn't work BUT if I edit that footage in PRE7 and then load the PSE7 Organizer I see the footage has been automatically added. This makes no sense whatsoever!
Am I doing something really stupid here? Why oh why will the PSE7 Organizer not import .MTS (AVCHD) files?!
NB: While searching for a solution to this problem I have, thanks to this Forum, found out about the K-Lite Codec Pack. I downloaded and installed the Basic pack v4.4.5 and now I can, at least, play my .MTS video files in Windows Media Player... I wish I had found out about that a couple of months ago because it would have saved me from buying Cyberlink PowerDVD 8!
Please someone help before I lose the plot.
Thanks
Patrick
b PC: Intel Core i7 940 CPU, 6GB RAM, RADEON HD 4870 512MB, Vista 64 bit
b Camera: Sony HDR SR12 producing .MTS files (footage in full 1920x1080i HD)

Hi
I'd just like to add an update to this post.
b Summary:
*K-Lite Codec Pack clashes with Sony's Picture Motion Browser (PMB) software
*Analysis of video in Sony's PMB is well worth doing!
*You can Drag and Drop clips from Sony's PMB into PRE7
b Detail:
As you've probably gathered I have now settled on using Sony's Picture Motion Browser (PMB) to Catalog all my video. Sorry Adobe to talk about someone elses product but the Adobe Organizer just can't cope with AVCHD footage no matter how you manage to import it! It's far too sluggish and my PC has an Intel Core i7 940 CPU with 6GB RAM and a 10,000 RPM HDD!
Anyway, in my first post you'll have read me raving about the K-Lite Codec Pack but sadly I've had to uninstall it because it kept on causing PMB to crash. PMB runs much smoother and quicker WITHOUT that codec pack. Something about it clashed with PMB. The once agile PMB became sluggish and unresponsive.
Having now removed the codec pack PMB is back to being agile and generaly lovely.
To view AVCHD footage outside of PMB I have reverted to using Cyberlink's PowerDVD 8 - there's always a pregnant pause between double-clicking on the clip and it playing but that's the only drawback.
If you are going to use Sony's PMB for cataloging your video collection (and I recommend you do so BUT only if you have AVCHD footage - otherwise stick to Adobe's Organiser) then I can fully recommend "Analyzing" all of your footage. This takes time and a bit of patience because it kept stopping for no apparent reason but would readily start up again (without having to do anything else) BUT once it's done it'll reward you with the following:
*Filter on any combination of Scenery, People, Smiles - e.g. with a click of a button you can isolate footage that contains smiles, etc
*Face Search - if you select some or all of the footage in the right-hand pane it will then put a small thumbnail for all of the different faces in that selected footage in the bottom "Face Search" pane. If you then click on one of those thumbnails it will jump to the clip(s) that contain that face and grey out all the other clips
*Expand Videos - This tool is brilliant! In normal viewing mode you get a thumbnail of the video whether you're in Folder view, Calender view or Detail List view. If, however, you select "Expand Videos" from the tool bar it will show you a series of frames contained within that clip. You can choose from "Highlights" or various regular intervals (5 secs, 10 sec, 30 sec, 1 min, etc). The Highlights option does a pretty good job of picking out the significant changes within the clip
Lastly, I have discovered that you can drag a clip from Sony's PMB into PRE7. It won't let you put it directly onto the Timeline but it will let you drop it into the Project file list (found under the Edit tab).
I do hope that this info has helped others like me who are trying to get to grips with editing and cataloging AVCHD footage.
Patrick

MTS not to consider open PR,PO and quality stock

Dear all,
my client wants for MTS scenario system not to consider Stock of RM for Open Purchase order, Open PR and Quality Stock at the time of MRP run for SFG and FG.
I tried in SPRO settings also in OPJJ( availability check - 02 and checking rule - PP) remove all tick maintain all stock empty and OPJK ( order type PI01 assign to checking rule PP) but system consider stock , how to solve this issue.
pls guide me
sakthi

Hi
Goto OPPQ and slect you plant
Click the Available stock
Check the BOX Indicator: stock in transfer available for planning
In OPJJ check the Incl. PR and Incl. PO for your availability check
try this
Thanks
S.Murali

MTS material Stock Allocation against Sale Order

Hi,
I have a requirment, While creating an sale order for a MTS material the stock from Unrestricted should be allocated to that sale order stock.
Expecting a solution,
Thanks and regards,
Mahi

Hi Lakshmipathi,
U r right the scenario is the same as u mentioned. But my requirment is that while creating a sale order for an MTS material the allocated stock should me posted into that sale order stock. i.e. similar to the stock allocation happening while creating an order for MTO material.
Hope u can understand my requirment.
Regards,
Mahi

I am using MTS files. They load in PE fine. The problem is when I try to play them, I just get audio and no video. I have installed the latest updates. Is there a CODEX that I need.

I have windows 8.1. I have downloaded the mts files from my video camera onto my hard drive. I have loaded a subset of these mts files into premier elements and they show up fine. I can bring them to the time line without a problem. The issue is that when I click on them, I only get the audio and no video. Normally when you click a thumbnail, the picture shows in the large screen. That screen remains blank.

John - thanks for your response
1. Graphics Adapter: Nvidia GeForce GTX 650
2. My driver before you response was 3/4/14   9.18.13.3523. I went to Nvidia and downloaded and installed latest driver 7/2/14 9.18.13.4052
3. Rebooted and checked APE and no change in the problem. Still doesn't show video when I double click an thumbnail or if I single click it does not show a video image in the large screen.
4. Some things I have done to try to resolve the problem.
     a. Searched this forum for a similar problem. I didn't see one.
     b. Did a web search to see if I could find a solution outside this forum
     c Went into "edit" and tried some changes in project preferences and setting to see if that would make a difference
     d. Tried to contact Adobe support to speak to a person but that seemed difficult and could never figure out how to do it.
5. I have always loaded AVI clips into this program and this is the first time I have tried MTS files. When I opened the new project, the program notified that I had to change something??? to load an MTS file and asked me if I wanted the program to do this for me. I said yes and here I am.   I seem so close to making it work.   Thanks

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

How can I convert an .mts file to mp3?

I would like to export just an audio clip (2 minutes) to an mp3 file. I have deleted the video in the timeline but it still leaves a 91Mb file - far too big of course to usefully use. I have found the Zamzar site who will convert but of course the file is still too unwieldy. Is there a way please?
I am using Prem El 9.
Most grateful.

Hi MissMoppett,
Thanks for posting Adobe forums.
You can also try to use a 3rd party software Format factory to convert .mts file .mp3.
http://www.pcfreetime.com/
Thanks,
Sandeep

How can i change the Creation Date of a video (mts-Format)?

I work with Phohoshop Elements 13 an i use Online-Album (Revel)
My Problem:
I would like to change the Creation Date of a Video-File (mts-Format). I don't no why but the date (in Metadata) is wrong and i would like it to change. If i change it in Photoshop Elements the Date (Edit... Change Date...) it seems that the date has changed, but in reality in the Metadata is still the wrong date (see attachment).
Why this ist important for me:
The Adobe Revel (Online-Album) takes always the date from the metadata which is wrong.
Any idea how i can resolve my Problem?
How i can change the Metadata?

Hi,
Did you get help ? Or do you have a work around ? I have about 20.000 Pictures and countless videos to organize myself.
I just ran into the same problem. Except that after a while Adobe will undo the changes I have made to the date.
Here's a screen shot I just made of one of the files.
Look at this one ! This one is really interesting:
After changing the date to : 1889 . Adobe changed it to 01.01.1970 00:59

I have MTS files imported from a Canon HD cam. They import into I movie and I see them in the Finder folders and they preview fine. I have a new project and some of the clips are freezing and some audio is now gone? Do i need a file converter and convert

I have MTS video files that import from a Canon Vixia HF S20 HD camera. I imported into I Movie. They converted into MOV files and I see them in the movies folder in finder. They view fine and run through the events folder in Finder. In I Movie, I created a new project and used a "Theme". The project worked fine at first but then some clips started to freeze and some lost audio. The effected clips are the same in the project library and in the event library, meaning they are froze in both places. As I said when i view through finder the MOV files preview and work fine. Is this inherent to MTS files using in I movie. SHould i consider using a file converter to convert to MOV files prior to importing into I movie.
I found on Apple support site info that states the MTS files can only be imported through the camera. I am developing my back up procedures and now I am faced with backing up in the original MTS files but not being able to reload if necessary into I movie. Any suggestions?

I'd like to add that after I import these clips without thumbnails, iMovie does give me an error and say that they could not be imported. No explanation as to why, though. Again, they play fine on my camera.

Installing Oracle Services for MTS (9.2) on a 8.1.7 Database

Hello,
I'm trying to run the script oramtsadmin.sql which comes with the Oracle Services for MTS 9.2 on a 8.1.7 database.
When trying to compile the UTL_ORAMTS package I get the following error:
The following error has occurred:
PACKAGE BODY MTSSYS.UTL_ORAMTS
On line: 0
PLS-00908: The stored format of UTL_ORAMTS is not supported by this release
Any idea where I can find a copy of this wrapped package that can be compiled on a 8.1.7 database ?
thx,
Piet Neyrinck

I have the same problem. The documentation sayes that it will work with 8.1.7, but when I run the script I get the same error

How can i open .mts files in premiere cs4?

Hi all,
I am using premiere cs4.
when i import .mts file in cs4 it says file format is not supported.
could any one please tell me how can i open .mts file in premiere cs4.
Thanks
Murali.

What kind of audio did the camera record? For example, the Sony NX5U can be set to record linear PCM audio, which will not import into CS4. If the same camera is set to record AC3 audio, then the clips should import and play as expected. This thread may help:
Adobe Community: AVCHD audio
Jeff

.MTS File Metadata Workflow?

I have a client who needs to be able to search through a huge number of video clips via keywords in metadata but i've hit a huge wall when it comes to .mts files.
I am unable to write any metadata to these files, i'm seeing various reasons as to why this is the case, but no solution.
Spoke to three people at Adobe chat support this morning and no-one can help.
Is there any workflow in the Adobe Suite that allows metadata/keywords to be added to .mts files that can then be searched in Bridge or Lightroom for instance?
I have a keyword hierarchy produced that was intended to be used for tagging in Lightroom, I cannot assign the keywords to the original files but is it possible to create a Catalog that can then be handed over to the client with a copy of the video files so that they are searchable within the Lightroom software?
I have been trying to achieve anything similar in Prelude but still no success.
Am I the only one having this problem?

If you want to rewrap MTS files on Windows, without transcoding (like with Clipwrap), you can do that with FFMBC (for example). Yes, you can than reconect original files to rewrapped H264 MP4 and new Resolve will be able to read your timeline. However performance will be far from good.
Actually there is no perfect workflow for Premiere > Resolve roundtripping for MTS files at this moment:
- You can transcode everything to DNxHD or Prores before editing, but that's waste of time and disk space
- With combination of AE scripts you can transcode only material used in edit, but again that's waste of time, and you'll have to rebuild your timeline manualy
One option in Premiere Project Manager would solve all issues with roundtripping and that's "Create new trimmed project and TRANSCODE media with handles". That way you would be able to edit native, and transcode only media used in timeline.
At this moment your best option is to transcode everything before edit. On Windows use DNxHD, pick bitrate according to your source footage, and everything will be fine.

VC IN MTS

Similar Messages

Maybe you are looking for