VCore over 1.550 + 10% does not post to end; Winchester and Corecenter voltage issues

I can't get vcore more than 1.64 using my winchester. It does not help to use for example 1.500 + 15% either. I've tried 1.36b and 1.41mod bioses. With corecenter I can use vcore up to 1.800 just fine. Temperature of the water or of the case has no effect.
Now I''m stuck with 1.65 (changes btw 1.63-1.65 in bios and Speedfan) when I use 1.550+10% (which should be 1.7 but it isn't).
Is there some other program with which I could change vcore in windows except Corecenter? I could up fsb and vcore automatically during xp login. Corecenter is also a funny program as it ups the voltage upside down :D.. When I put + it lowers vcore and when - it ups it. So 0% gives 1.80 measured with Speed fan and it is quite stable.
Perhaps a bios update will fix this or is there any other solution? I know that Winchesters only can get 1.7 from this board (but it isn't even that but ~1.64) but a program like Clockgen (which does not work with voltage on this board) would correct all problems.

Quote
Originally posted by Saulous
Yes I said, would not be a problem with water cooling. I would attach two jpg pictures if I could but I don't have a place to put them and here I can't attach them. The first one would be a digicam shot showing the voltage in bios which is 1.63-5 when it should be 1.550x1.1=1.705 and the second one would be print screen shot which shows how the voltage in speedfan arises from 1.63-5 to ~1.8 when I set 0% arise with corecenter; lowering the % from 8.3 to 0; even if the voltage is set in the bios 1.550x10% . But who cares you can test it yourself, too.
Man... I didn't realize a Winchester could take that much power!
Rock on
Edit - It really blows that you can't post images on this forum w/out having to host them elsewhere.

Similar Messages

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • FSCM 9.0: COBOL Process GLPPPOST does not post Journal Entry correctly

    Folks,
    Hello. I am workin on FSCM 9.0 General Ledger module. "Edit Journal" is AE program that works correctly. But "Post Journal" is a COBOL program that does not works correctly.
    COBOL process GLPPPOST posts only debit accounts of a Journal entry into table PS_LEDGER but does not post credit accounts of a Journal Entry into table PS_LEDGER. When run the Ledger Report, the report has only column headers and has no data.
    Does FSCM 9.0 have a problem or COBOL process does not work correctly ? Can any folks help me ? Thanks.

    Folks,
    Hello. Thanks a lot for replying.
    I linked my Ledger Group RECORDING with my Business Unit BU01 using "Set Up Financials/Supply Chain > Business Unit Related > Ledgers For A Unit". Then linked UserID VP1 with BU01 in User Preference. I have checked all information about the 3 concepts (VP1, BU01 and RECORDING) and don't see anything wrong.
    I suspect the problem is in the Journal Line page because its Chartfileds belong to 2 SetID (SHARE and FEDRL) and 2 Business Unit (BU01 and BU02).
    When define Chartfields value using "Setup FSC > Common Definition > Design Chartfield > Define Value", I see Chartfields "Fund", "Class" and "Program" with SetID "FEDRL", and other Chartfields with SetID "SHARE". The 2 SetIDs are default in the system.
    Because one Business Unit (BU01) can link to only one SetID (SHARE), I create one more Business Unit BU02 and linked with SetID "FEDRL". Thus, when create a Journal entry using "General Ledger > Journal > Create Journal ", we type in Business Unit (BU01) and Ledger Group (RECORDING) in Header page, but in Line page, some of Chartfields link with SetID SHARE and BU01, and some of Chartfields link with SetID FEDRL and BU02. The journal entry indicates "Inter/Intra Unit Journal". When select "Edit Journal" and click "Process", the message comes up as follows:
    "Ledger Group RECORDING is not valid for Business Unit BU01. Ledger Group defined for this journal is not valid for the Business Unit BU01".
    My question is: That the Chartfields in Journal Line page link with 2 SetIDs and 2 Business Units causes the above error ? Can any folks help ? Thanks.

  • HP MS218 Not Booting - Does not POST - Cannot reach BIOS

    Hello,
    I have an MS218 (product number: BR372AA #ABA) that I have been having issues with. It used to work fine (ran on WinXP), but currently will not even boot properly at all. No software or hardware changes were made to cause this problem to begin occurring, it simply just started happening one day when I went to turn the computer back on. The issue that I am currently experiencing is as follows:
    - Power stays on, but nothing is ever displayed on the screen
    - Does not post, cannot reach BIOS
    - Acts almost as if it is resetting itself constantly, the fan in the back will start to spin for a second or two, then stop, then start again, and repeat indefinitely until I unplug the power adapter.
    I initially figured it was a hardware issue, likely the motherboard, and began to troubleshoot the problem. As I removed non-vital components, the problem would persist. For instance, it happens regardless of external things (keyboard, mouse, etc.) being plugged in, or regardless of the hard drive or optical drive being plugged in. It still appears to happen in the absense of memory, however, I will instead hear beep codes (likely telling me that I don't have any RAM in). Ultimately, I decided to order a replacement motherboard, which recently arrived. Upon replacing the motherboard, the exact same problems happen, which leads me to believe that the motherboard was somehow not the culprit. I have also tried multiple power adapters to no avail, as well as resetting the CMOS battery without any luck. I'm really at a loss for what to do from here, and am currently sitting on hold with HP tech support.
    Any advice is welcome. Thanks in advance for your time and assistance.

    Hello Jaycera,
    There are two more components that we haven't replaced or look at and I would approach them in the order listed.
    1. Power supply
    2. Processor
    It sounds like it's a power issue the computer is getting enough power to start booting up and then losing it. Thus anytime I hear a power issue the first thing I think of is a power supply issue.
    The other thing is it could be the processor. The computer starts booting, makes a call to the processor, fails, boots down, starts booting up, makes a call to the processor and here we are in a vicious cycle.
    It could just be the processor needing reseated. Take it out, put it back in and make sure it's in properly and no pins are bent, or the processor could be bad.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • I have just bought a new imac over the internet. it does not work. which store do I return it to?

    I have just bought a new imac over the internet. it does not start up which store can I return it to?

    jimoefrompymble wrote:
    I have just bought a new imac over the internet. ...
    If Purchased from Apple... Contact AppleCare... you have 90 days Free Telephone Support... 3 years if you Purchased the AppleCare Protection Plan.

  • Deactivate a depreciation area (Real area but does not post)

    Hi Guys
    I want to deactivate a depreciation area.
    It is a real depreciation area but area does not post in GL.
    Is there any risk in deactivating the depreciation area in the asset class ? We do not want to use this area any more '
    Thanks

    Thanks Anil
    But my question is
    Should I only have  to deactivate the depreciation area in the asset class OAYZ ? In this case new asset won´t see this depreciation area , but old asset still show this depreciation area in AS03. It seems no issue with this approach.
    Someone has suggested me also to deactivate it in OABN (but this depreciation area did not post) If I untick ordinary depreciation field  in OABN when I go to the asset I have an error message:
    "You cannot manage ordinary depreciation in area 60
    Message no. AA656
    Diagnosis
    According to Customizing settings, ordinary depreciation cannot be managed in area 60. The posting being processed changes ordinary depreciation.
    Procedure
    Check the amount entered and the transaction type."
    So, what is the safety procedure just go to OAYZ (I think this is the right way) and unclick the field "deact" ?
    "Indicator: Depreciation area is deactivated
    Set this indicator if you want the depreciation area to be inactive in this asset class or asset (although it is defined in the chart of depreciation)."
    Any other suggestion ?
    Regards

  • After I upgraded to OS x 10.7.5 my Mail account does not post mail, how come?

    After I upgraded to OS x 10.7.5 my Mail account does not post mail, how come?

    No. Tried all that. Server finally says they don't understand what's happening so better if I just delete accounts and set them up again from scratch. Haven't done that yet in hopes someone in the Apple world will have found a solution.

  • Voice over in ipod nano does not recognize different languages

    hey, apple support? would you be so kind as to answer this question?
    This is really a problem! Voice over in ipod nano does not recognize different languages and speaks only one language!! even though the song tags are in russian spanish japanese etc
    When you plan to fix it??????

    Hey ecmda,
    Thanks for using Apple Support Communities.
    If it is playing one song over and over it may be on repeat.
    iPod nano
    User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1624/en_US/ipod_nano_user_guide.pdf
    Repeat songs
    Tap the Now Playing screen, then tap . Tap again for more options:
    = Repeat all songs in the current album or list.
    = Repeat only the current song over and over.
    Have a nice day,
    Mario

  • My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    My new iPod plays the music over and over again. It does not stop and the volume buttons have no effect. What can I do? The RESTRICTIONS  require a a passcode and I don't have one. Any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup.
    In order to restore with the unknown Restrictions passcode you will likely have to place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Last,
    - Restore to factory settings/new iOS device.      

  • System does not post after Bios Flash

    After using Live Update to flash my Bios to the new version, the computer does not POST. The Bios Flash was successful - it rebooted and started normally. When I tried to restart it the normal way, it will not boot. The fans run when the "power on" button is pressed but nothing more. I cleared the CMOS using the jumpers but the problem was not solved. Can any one help?
    Can some good Samaritan give me a step by step method to resolve this problem?

    I followed the link you provided and managed to resolved it:
    1) Removed one memory stick and floppy;
    2) Cleared CMOS and rebooted successfully;
    3) Inserted floppy and reverted to the previous BIOS;
    4) Inserted the other memory stick and brought system back to full power again.
    Thank you very much for your assistance. I am sure MSI is aware of the problem and will take steps to rectify it ASAP

  • K9N2 plat does not post

     I have been having multiple issues with my system and I later determined that it was the power supply. I replaced the PSU and I also got a new case in the process. I installed everything in the new case including the PSU. I turned it on to test the system before I put all the USB stuff and peripherals into the mobo and it works good, everything is normal, but once I hooked all my peripherals like my keyboard, mouse, monitor it completely stopped posting the little LEDs are all red and the speaker does not make a beep. I unhooked it all and the problem still persisted. Then i took out my GPU and tried to turn it on and still and the LEDs are red I took out the mobo out of the case took all but one stick of ram off the mobo and hooked it up to the PSU and still it does not post,  and the LEDs are still red. Can someone tell me how to fix this problem or do i need to get a new mobo all together?   

    Read the posting guide as Stu says and post your system specs.
    To start with clear the CMOS: >>Clear CMOS Guide<<

  • My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch.  Any ideas?

    My MacBook Pro, running 10.7.3, does not recognize when my iPhone and iPad are on the same network, thus it does not synch.  Any ideas?

    Try the basics first:
       Change your router channel number.  Most times this works & is all you have to do.
    Disconnect & reconnect your modem.  unplug it for about 10 seconds.  Plug it back in.  Do the same for Apple’s routers.  Wait for everything to reboot.
    System Preferences>Network
    Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary.
    Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer.   See these basic networking KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    Manually provided DNS server addresses are higher priority than DHCP's
    http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    ============================
    What to do when you can't connect to the Internet
    Also, run the Airport Utility app which is located inside the Utilities folder.
    =====================
    If using a  Linksys router, contact LinkSys Customer Support and/or post in their forums.
    If using Apple's Airport, please re-post over in one of the AirPort Forums.

  • My Netbook that my phone is sync to does not have a cd drive and I want to put my digital copies onto it

    My Netbook that my phone is sync to does not have a cd drive and I want to put my digital copies onto it but I do not know how to, I have a laptop I can put the disks in but I don't know if it will let me copy the file to a flash drive any ideas? also I keep getting this message about updating my media player security and when i go to the site it links to the update button is greyed out and will not allow me to do it

    If you import the CD on your laptop with a disc drive, then you can place the music files on a flash drive and transfer them over to your netbook. You could also choose to email the music files from the disc drive laptop to yourself to download them onto your netbook through your mail account.
    As for your second question, is it windows media player you're trying to update? Try downloading the latest version of WMP to see if that resolves the issue.

  • Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010

    Dear Expert,
    We have activated Funds Managment in quailty Client. but when ever we are trying to create PO below error message is coming:-
    Fund Center Z001 does not exist in FM area and fiscal year 20.01.2010
    Message No-F6580
    Also when ever we are trying to post an FI document the same error message is coming.
    Please advise with T-Code.
    Regards,
    Alok

    Dear Mr Srinu,
    The Z001 problem is solved by creating a fund centre using FMSA. Now while doing the shipment cost below error message is coming:-
    1.Account Assinment to Commitment Item not supported with this GL account. Message no-ME032
    2. No Funds center entered /derived in item 00010(1020/302401/)
    Pl help,
    Regards,
    Alok

  • HT1296 replacement iphone does not show up on itunes and i cannot sync

    replacement iphone does not show up on itunes and I cannot sync

    You can't have an iMac PPC (PowerPC) if you loaded Snow Leopard.  iMac Intel are the only Macs that are compatible with 10.6.   So the first thing wrong you are doing is posting in the wrong forum, or giving us misinformation.
    Go to Apple menu -> About This Mac to find out exactly what you are running.  A G5 is a PowerPC.  Intel is Intel.
    Also look at the operating system in that window and update your profile.
    What version of iTunes do you have?
    Has the iPad ever shown before on this machine?   Once we have your correct info, I'll ask a moderator move this thread.

Maybe you are looking for