Vender Master Data - BAPI

hi,
can anybody tell the name of BAPI used to create vendor master data.
thanks
konala

Hi
Please Use
<b>BAPI_CUSTOMER_CREATE</b> function module.
Documentation
FU BAPI_CUSTOMER_CREATE
Short Text
Create Customer Master Online
Functionality
With this method, you can create or extend a customer.
Parameters
INIT_KUNNR
CUSTOMERNO
CUSTOMER
RETURN
Exceptions
Function Group
LC01
Hope this will help.
Please reward suitable points.
Regards
- Atul

Similar Messages

Material master data BAPI and LSMW log

I have three questions want to ask :
1. I will use all the view to create material master. I want to know if there is one BAPI to create it.?
2. If I use LSMW to create it, in LSMW i use the BAPI method to create it. But I should to know the detail log information When I finished the LSMW. How can I get the log information ,because I should send the log information to other system. I must get the log, then I can send out the log information to other system.
3. I want to know if i can run lsmw in report. if there one FM to do this ? User don't want to step by step to run this , they want to run only once time so they can create the master data.
Thanks in Advance .
susan

Hi Ming,
Use the BAPIs:
BAPI_RETAILMATERIAL_CREATE.
BAPI_MATERIAL_SAVEDATA
refer the sample code
https://forums.sdn.sap.com/click.jspa?searchID=13348102&messageID=3459824
Regards,
Chandra Sekhar

BAPI OR RFC FOR CREATION OF MASTER DATA

Hi
I want BAPI or RFC for master data creation,(Vendor,Customer,material,Service master)
Vendor(MK01)
Customer(XD01)
Material(MM01)
Service Master(AC01)
Pls Help me on this
Regards
Rajan

Hi ,
For material
BAPI_MATERIAL_SAVEDATA
For service
BAPI_SERVICE_CREATE

Data transper for customer master using BAPI

I am trying to upload the customer master data from flat file to SAP tables using BAPI Customer.CreateFromData1. But not all of the fields are availble in this BAPI. Few of the important fields are absent e.g incoterms, account signment group of customer..it picks up default value from ref cust.....Is there any other way to load it......
Thanks and regards,
Tushar

Look at OSS [Note 390045 - Usage of BAPI_CUSTOMER_* of function group V02D|https://service.sap.com/sap/support/notes/390045]
you can only do this using ALE or Batch Input
So use [ALE|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=createcustomerALE&cat=sdn_all] or [BDC|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=createcustomerBDC&adv=false&sortby=cm_rnd_rankvalue]. (dixit SAP)
Regards

Using BAPI's or RFC's to Create a new BI Master Data

Hello SDN Guys.
I am trying to create an application to mantain BI master data and would like to know if you can help me to find a specific RFC or BAPI that I can use in VC .   The parameter should be the infoobject name and their attributes to be created in BI.
My Infoobject is Zarea and has one attribute Zresp
Zarea      Zresp
1            Mike
2            Oliver
3            John
I would like to create a new one using RFC or BAPI services on Visual composer.
The problem is , Name of BAPI/RFC ? Or I have to create a new one based on other standard RFC ?
Best Regards,
Mauro.

Hi All,
We have copied some standard RFC BAPIS and use it with sucess in Visual Composer.

I am unable to upload the customer master data using BAPI.?

Hi Guru's,
i am unable to upload the customer master data using BAPI.(BAPI_CUSTOMER_CREATEFROMDATA1)
Please guide me how upload the data...
Thanks in iadvance
Srinivas...

Hello Srinivas
This BAPI does not allow to create a new customer from scratch but only to copy an existing customer to a new one and change its address data.
The reference customer has to be provided using IMPORTING parameter PI_COPYREFERENCE. See also the BAPI documentation for more details.
The BAPI does the same like transaction XD01 with Reference.
Regards
Uwe

What bapi or FM can create/change vendor master data?

We want to do a rfc to create/change vendor master data .If use BDC,the change function is very very complex,but i can't find any BAPI/FM in sap!

>
Keshav.T wrote:
> Hi,
>
> just some more addition to vinodh's reply . the actual method you must is maintain_bapi of class vmd_ei_api
Hi Keshav - you should have noticed vinodh's reply came from something your wrote earlier this year: Search BAPI to create Vendor in ECC and from an extenal application

BAPI/function module to create/update vendor master data

Hi
We are on ECC 50 and have a need to update vendor master data through a programatic interface ( non-dialog ) with ABAP. What is a good function module that can be used to create/update vendor master data - I looked at BAPI_VENDOR_CREATE and did not find any input interfaces that can be passed to this BAPI.
Previous experiences with the right BAPI for this purpose that can be shared is appreciated. <REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 26, 2008 5:58 PM

Hi Kiran,
If you want to load the vendor data into sap its better to go with LSMW batch input program.
object 0040
method 0001
program name RFBIKR00
Program type B
this would be a good choice. Recently i did the same.

BAPI for Changing Applicant Master Data

Hi,
We are trying to access our SAP R/3 remotely for the creation and
maintenence of Applicant Master Data. We were able to identify the BAPI
"BAPI_applicant_create" for the creation of an applicant but are unable
to determine the BAPI required to maintain / change applicant data. Can
you please assist us in this regard.
regards,
Bilal Nazir

Hey
I believe since there is no BAPI available so we could use the FM. And as far it being not remote enabled, i think thats not a major problem, we can always make a copy of it and make it remote enabled.
If anyone has any other option in mind, please do share.
Regards
Bilal

BAPI CUSTOMER MASTER DATA

Hi
I want to create Customer Master data using BAPI
Can someone tell me what is step by step procedure for this.or just an example code.
Thanks
Namrata.

hi
use the BAPI BAPI_CUSTOMER_CREATE.
Go thru the documentation of this BAPI for more details..
Cheers,
Abdul Hakim
Mark all useful answers...

Mobile number is not uploading for BP master data creation using BAPI ?

Hi,
I am creating Business Partner Master data in ISU/CCS using the BAPI "BAPI_ISUPARTNER_CREATEFROMDATA". Uploading data from Excel.
Successfully uploading and creating new Business Partners apart from Mobile number, nick name,middle name, and name of birth fields.
There are 2 issues i am facing:
1. There is no field name is called Mobile number (data element AD_MBNMBR1) in structures of that BAPI.
2. Nick, middle and birth names fields are there, but they are under the Expand(+ symbol) in FPP2 (FPP1) Tcode. That's why these fields are not uploading.
How to upload them?
Please help me out.
Thanks
Sarayu Parvathaneni.

Hello Roopesh,
Ususally, to make the BAPI update the database, you have to run BAPI
BAPI_TRANSACTION_COMMIT after BAPI_PRDSRVAPS_SAVEMULTI2 is executed.
In se37-> You may insert
BAPI_PRDSRVAPS_SAVEMULTI2
BAPI_TRANSACTION_COMMIT
in the Menu-->function module >test>test sequences.
Also as Mani said, if the update is successful the return parameter will be '0'.
Regards,
Ademola

ISU Business Partner Master data Upload using BAPI?

Hi Experts,
I used BAPI "BAPI_ISUPARTNER_CREATEFROMDATA" to upload ISU Business Partner master data.
This BPAI is not uploading the following topics:
1. Communication Address like Telephone,extension, email and etc., are not uploading.
2. Middle name, nick name etc, the field which are under the Expand symbol not uploading.
3. Reference customer also not uploading.
strctures what I used are:
for communication : TELEFONDATANONADDRESS, E_MAILDATANONADDRESS
general data : BAPIISUBPD
Reference customer: BAPIBPPARA-MUSTER_KUN
I am passing all the data but not uploading some of the field values (above) using that BAPI.
Could you please let me know the solution?
Please help me out!
Thanks in advance.
sekhar

Sekhar:
Try with below details:
for communication : BAPIISUBPA & BAPIISUBPAX.
general data : BAPIISUBPD & BAPIISUBPDX
Reference customer: BAPIISUBPA-BP_EXT & BAPIISUBPDX-BP_EXT
Thanks,
Murali.

Zprogram to create material master data using bapi

can anyone send me a zprogram which uses a
bapi to create\update material master data .
thanks ,
Amit

hi,
here below a code sample that will help you
FORM execution .
DATA: is_headdata TYPE bapimathead.
DATA: is_clientdata TYPE bapi_mara.
DATA: is_clientdatax TYPE bapi_marax.
DATA: is_plantdata TYPE bapi_marc.
DATA: is_plantdatax TYPE bapi_marcx.
DATA: is_valuationdata TYPE bapi_mbew.
DATA: is_valuationdatax TYPE bapi_mbewx.
DATA: it_materialdescription TYPE bapi_makt OCCURS 0 WITH HEADER LINE.
DATA : is_storagelocationdata TYPE bapi_mard,
         is_storagelocationdatax TYPE bapi_mardx.
*... views
is_headdata-material = mara-matnr.
is_headdata-ind_sector = 'M'.
is_headdata-matl_type = 'ROH'.
is_headdata-basic_view = 'X'.
is_headdata-purchase_view = 'X'.
is_headdata-mrp_view = 'X'.
is_headdata-account_view = 'X'.
is_headdata-cost_view = 'X'.
is_headdata-storage_view = 'X'.
*... constants
is_clientdata-pur_valkey = '3'.
is_clientdatax-pur_valkey = 'X'.
*... Données article générales (de l'écran)
is_clientdata-base_uom = mara-meins.
is_clientdata-matl_group = mara-matkl.
is_clientdata-mfr_no = mara-mfrnr.
is_clientdata-manu_mat = mara-mfrpn.
is_clientdata-pur_status = mara-mstae.
is_clientdata-old_mat_no = mara-bismt.
is_clientdatax-base_uom = 'X'.
is_clientdatax-matl_group = 'X'.
is_clientdatax-mfr_no = 'X'.
is_clientdatax-manu_mat = 'X'.
is_clientdatax-pur_status = 'X'.
is_clientdatax-old_mat_no = 'X'.
*... Description
it_materialdescription-langu = sy-langu.
it_materialdescription-matl_desc = makt-maktx.
APPEND it_materialdescription.
is_plantdata-sm_key = '000'.
is_plantdata-dep_req_id = '2'.
is_plantdata-availcheck = '02'.
is_plantdata-auto_p_ord = 'X'.
is_plantdatax-sm_key = 'X'.
is_plantdatax-dep_req_id = 'X'.
is_plantdatax-availcheck = 'X'.
is_plantdatax-auto_p_ord = 'X'.
is_plantdata-pur_status = mara-mstae.
is_plantdatax-pur_status = 'X'.
      is_plantdata-profit_ctr = '100012'.
is_plantdata-proc_type = 'F'.
is_plantdata-determ_grp = 'Z001'.
is_plantdata-deploy_horiz = '000'.
is_plantdatax-proc_type = 'X'.
is_plantdatax-determ_grp = 'X'.
is_plantdatax-deploy_horiz = 'X'.
*... Plant data
is_plantdata-plant = marc-werks.
is_plantdata-pur_group = marc-ekgrp.
is_plantdata-abc_id = marc-maabc.
is_plantdata-mrp_type = marc-dismm.
is_plantdata-plnd_delry = marc-plifz.
is_plantdata-lotsizekey = marc-disls.
is_plantdata-safety_stk = marc-eisbe.
is_plantdata-mrp_ctrler = marc-dispo.
is_plantdata-iss_st_loc = marc-lgpro.
is_plantdata-sloc_exprc = marc-lgfsb.
is_plantdata-round_prof = marc-rdprf.
is_plantdatax-plant = marc-werks.
is_plantdatax-pur_group = 'X'.
is_plantdatax-abc_id = 'X'.
is_plantdatax-mrp_type = 'X'.
is_plantdatax-plnd_delry = 'X'.
is_plantdatax-lotsizekey = 'X'.
is_plantdatax-safety_stk = 'X'.
is_plantdatax-mrp_ctrler = 'X'.
is_plantdatax-iss_st_loc = 'X'.
is_plantdatax-sloc_exprc = 'X'.
is_plantdatax-round_prof = 'X'.
*... Valuation
is_valuationdata-val_area = marc-werks.
is_valuationdatax-val_area = marc-werks.
is_valuationdata-price_ctrl = 'V'.
is_valuationdata-price_unit = '1'.
is_valuationdata-val_class = '3000'.
is_valuationdata-qty_struct = 'X'.
is_valuationdata-orig_mat = 'X'.
is_valuationdata-price_unit = mbew-peinh.
is_plantdata-lot_size = mbew-peinh.
is_valuationdatax-price_ctrl = 'X'.
is_valuationdatax-price_unit = 'X'.
is_valuationdatax-val_class = 'X'.
is_valuationdatax-qty_struct = 'X'.
is_valuationdatax-orig_mat = 'X'.
is_valuationdatax-price_unit = 'X'.
is_plantdatax-lot_size = 'X'.
Storage
IF NOT marc-lgpro IS INITIAL.
    is_storagelocationdata-plant = marc-werks.
    is_storagelocationdata-stge_loc = marc-lgpro.
    is_storagelocationdata-stge_bin = mard-lgpbe.
    is_storagelocationdatax-plant = is_storagelocationdata-plant.
    is_storagelocationdatax-stge_loc = is_storagelocationdata-stge_loc.
    is_storagelocationdatax-stge_bin = 'X'.
ENDIF.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
headdata                   = is_headdata
clientdata                 = is_clientdata
clientdatax                = is_clientdatax
plantdata                  = is_plantdata
plantdatax                 = is_plantdatax
FORECASTPARAMETERS         =
FORECASTPARAMETERSX        =
PLANNINGDATA               =
PLANNINGDATAX              =
   storagelocationdata        = is_storagelocationdata
   storagelocationdatax       = is_storagelocationdatax
valuationdata              = is_valuationdata
valuationdatax             = is_valuationdatax
WAREHOUSENUMBERDATA        =
WAREHOUSENUMBERDATAX       =
SALESDATA                  =
SALESDATAX                 =
STORAGETYPEDATA            =
STORAGETYPEDATAX           =
FLAG_ONLINE                = ' '
FLAG_CAD_CALL              = ' '
IMPORTING
return                     = return
TABLES
     materialdescription        = it_materialdescription
UNITSOFMEASURE             =
UNITSOFMEASUREX            =
INTERNATIONALARTNOS        =
MATERIALLONGTEXT           =
TAXCLASSIFICATIONS         =
     returnmessages             = it_returnmessages
PRTDATA                    =
PRTDATAX                   =
EXTENSIONIN                =
EXTENSIONINX               =
endform.
Regards.
David

Create Material Master Data with BAPI

Hi,
I don't know using of BAPI. I want using BAPI_MATERIAL_SAVEDATA bapi for creating material master data for Basic Data1, Basic Data2, Purchasing and MRP views. Does anybody can help me ?
Thank you
Good night

Hi,
Please refer to the documentation below:
BAPI_MATERIAL_SAVEDATA
Short Text
Create and Change Article Master Data
Functionality
You use this method to create new material master data or to change existing material master data. The data on a material can be transferred for each call.
When creating material master data, you must transfer the material number, the material type, and the industry sector to the method. You must also enter a material description and its language.
When changing material master data, you need enter only the material number.
In the header data, you must select at least one view for which data is to be created. Depending on the view selected, you must maintain other required parameters. If you do not enter values for all of the required parameters, the method is ended with an error message.
The corresponding fields in the tables (such as CLIENTDATA) must first be supplied with data by the calling program. An indicator must also be set for each of these fields so that the data is written to the database by the method. This requires the calling program to supply the corresponding field with the indicator in a checkbox table (for example, CLIENTDATAX). Checkbox tables exist for tables that do not contain any language-dependent texts (MAKT, MLTX), International Article Numbers (MEAN), or tax classifications (MLAN). Several data records for a material can be created in these tables.
If a structure contains fields for units of measurement (such as structure CLIENTDATA, field BASE_UOM), language indicators (such as structure MATERIALDESCRIPTION, field LANGU), or country indicators (such as structure TAXCLASSIFICATIONS, field DEPCOUNTRY), there is always a field of the same name with the ending _ISO. This makes it possible to transfer either the internally used SAP code or a standardized ISO code for the units of measurement, language indicators, or country indicators. ISO codes are converted to an SAP code internally for further processing. The ISO code is used only if the SAP code is not transferred. If you use ISO codes, there must be a unique assignment of the ISO code to the SAP code in the following activities in Customizing for Global Parameters:
Check Units of Measurement
Define Countries
If you want to maintain long texts (basic data texts, internal comments, purchase order texts, material memos, or sales texts) or customer-defined fields for a material, some special conditions have to be observed. They are described in the documentation for parameters MATERIALLONGTEXT and EXTENSIONIN.
Parameters
HEADDATA
CLIENTDATA
CLIENTDATAX
PLANTDATA
PLANTDATAX
FORECASTPARAMETERS
FORECASTPARAMETERSX
PLANNINGDATA
PLANNINGDATAX
STORAGELOCATIONDATA
STORAGELOCATIONDATAX
VALUATIONDATA
VALUATIONDATAX
WAREHOUSENUMBERDATA
WAREHOUSENUMBERDATAX
SALESDATA
SALESDATAX
STORAGETYPEDATA
STORAGETYPEDATAX
FLAG_ONLINE
FLAG_CAD_CALL
NO_DEQUEUE
NO_ROLLBACK_WORK
RETURN
MATERIALDESCRIPTION
UNITSOFMEASURE
UNITSOFMEASUREX
INTERNATIONALARTNOS
MATERIALLONGTEXT
TAXCLASSIFICATIONS
RETURNMESSAGES
PRTDATA
PRTDATAX
EXTENSIONIN
EXTENSIONINX
Exceptions
Function Group
1001UEB
Thanks,
Sandeep.

WORK CENTER master data n corresponding Bapi

Hi........Gurus,
Guys Please provide me hep for creating WORK CENTER master data using Bapi
if u r providing exact Bapi name for creating WORK CENTER master data or please provide step by step documentation or program logic
that would be heplful to me
Feel free to ask me if my Q is not clear
Thanks in Advance
Ravindra

hi,
Customized Work Center List
The standard SAP Work Center List - CR05 includes the flag for
deletion work center. This customized work center list allows
you to include or exclude those work center that have been flag
for deletion. Those with a 'X' in the list are flag for deletion.
REPORT ZPPWORKCENTER
       LINE-SIZE 120 NO STANDARD PAGE HEADING LINE-COUNT 058(001).
TABLES: CRHD, "Work Center Header
        CRTX, "Text for the Work Center or Production Resource/Tool
        CRCO. "Assignment of Work Center to Cost Center
SELECT-OPTIONS: S_WERKS FOR CRHD-WERKS    DEFAULT 'XX',
                S_LVORM FOR CRHD-LVORM.
SELECT * FROM CRHD WHERE LVORM IN S_LVORM
                     AND WERKS IN S_WERKS.
   CLEAR CRCO.
   SELECT SINGLE * FROM CRCO WHERE OBJTY = 'A'
                               AND OBJID = CRHD-OBJID
                               AND ENDDA => SY-DATUM.
   CLEAR CRTX.
   SELECT SINGLE * FROM CRTX WHERE OBJTY = 'A'
                               AND OBJID = CRHD-OBJID
                               AND SPRAS = 'E'.
   WRITE: / CRHD-LVORM,
            CRHD-WERKS UNDER 'Plnt',
            CRHD-ARBPL UNDER 'Work Center',
            CRCO-KOSTL UNDER 'Cost Center',
            CRTX-KTEXT UNDER 'Description'.
ENDSELECT.
TOP-OF-PAGE.
    WRITE: / SY-DATUM, SY-UZEIT, SY-REPID, SY-UNAME,
             SY-PAGNO.
    SKIP.
    WRITE:/3 'Plnt',
           8 'Work Center',
          20 'Cost Center',
          33 'Description'.
*-- End of Program
try these bapis...
BAPI_BUSPROCESSND_CREATEMULTI
BAPI_WORKCENTER_GETDETAIL
BAPI_STANDARDMATERIAL_CREATE
THANKS
KARTHIK

Vender Master Data - BAPI

Similar Messages

Maybe you are looking for