Vendor Evaluation data in tables ELBM and ELBP

Hello,
Please can someone provide some direction for this issue we have with MM Vendor Evaluation in ECC5.0.
Basically, I have set up SAP standard Vend Evaluation config for our companies Purchase Orgs in SPRO, however, tables ELBM, and ELBP are not storing any values. The config that I have maintained includes:
-     Define the weighting keys in SM30 - V_T147J : set to equal weightings
-     Define the criteria in SM30 - V_T147G: left as standard
-     Define the scope of list in SM30 - V_T147M: left as standard
-     Define Purchasing Organization data: left as standard but no Subcriterion maintained. Weightings set as equal weightings. Points scores also left as standard/
Any ideas?
Thank you.
Dave
FL,USA.

Once you do all the config than you have to use ME61 than use ME6H transaction.

Similar Messages

  • Vendor Evaluation semi-automatic TABLE ELBM

    Hi,
    i am BW consulting,
    i want use the 0PUR_C06 cube but this use the extractor 0MM_PUR_VE_02   in R3, this extractor read information the ELBM table.
    When run de vendor evaluation, fill de ELBP (customer level)table but not ELBM (material level) table.
    someone knows how to fill the table?
    or the procedure for vendor evaluation semi-automatic at the level of material?
    Thanks!

    Hi,
    The table ELBM is filled in the info record. If you go to transaction ME12 and then to Extras/Vendor Evaluation, there you have a field Market behavior. This is the way this table is filled.
    I hope this helps!.
    Best Regards,
    Arminda Jack

  • Tables for vendor evaluation data

    Hai,
        I want to know the tables in which vendor evaluation data is being stored, and I need to get vendor evaluation data through my RFC, can u suggest me the procedure how I need to do it.
                                 Thank you
                                  Regards
                                    Srinivas

    Dear,
    You ask a whole Vendor evaluation concept you need to read the help and do customizing depend on the requirement, then you evaluate the vendor using ME61 or ME6G.Almost all of your question need customizing setup first
    below is the guide book :
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf

  • FM creation for vendor evaluation data

    Hai,
        In my function module I need to get vendor evaluation data. To do this from where I can get the details, r there any tables for this, could u suggest something for this, actually I'm new for this MM. Eventhough if there r any tables, before writing FM r there any settings to be done for this.
                I know in ME61 we can get these details, but to write RFC how to proceed.
                                       Thank you
                                     Regards
                                      Srinivas

    hi
    check
    ELBK, ELBN, ELBP u2013 Vendor Evaluation Related Data
    ELBM ( Vendor Evaluation: Material-Related Item)
    S013
    regards
    kunal

  • Vendor Evaluation Delivery Subcriteria Shipping Instr and Adher to Conf Date

    Hi experts,
    I have Vendor Evaluation configured for Delivery subcriteria Shipping Instr and Adher to Conf Date.  These are set to scoring method 6 and B respectively.  In the Purchasing Org Data, for subcriteria Delivery, I have equal weighting set for all 4 subcriteria (on-time del, quantity reliability, shipping instr, and adher to conf date).  When I run the vendor evaluation in ME61, and look at the evaluation of subcriteria, I see a score and weight for on-time delivery, and quantity reliablity.  But for shipping instructions and adher to Conf Date, there is no score and the weight is 0.0.  Does anyone know why there is no weight shown?  I know I have to maintain the scores for shipping instr and adher to conf date but I should see weight as 25% since I set these 4 subcriteria to equal weighting.  Can anyone help?  Thanks!
    Regards,
    Julie

    Hi,
    As an example its not available, nor tried self. As a common rule - if a main criteria created and sub criteria exists, when you run evaluation for main - excluding a stage of sub is not possible.
    Secondly try transaction code: ME6C
    Help says: Set this indicator if you only want to display those vendors that do not have
    an evaluation for certain main criteria. When you click on Execute, a screen allowing you to choose one or more main criteria appears. The missing evaluations for these criteria are then listed.
    here you can selection option to include/exclude evaluation.

  • Vendor evaluation data

    Hi,
    Once a vendor evaluation is carried out, the results will be stored in the tables ELBK, ELBP & ELBM. If one more evaluation is done for the same vendor the system will rewrite the data with the new evaluation data. Can you let me know if I can get the old evaluation data from somewhere.

    Once you do all the config than you have to use ME61 than use ME6H transaction.

  • Vendor Evaluation with QM - Tables

    Hello
    Can any one help the table information such us vendor evaluation main criteria and sub-criteria. Information stored in the audit lot , rejections and complaints etc. Please i am looking for only Vendor Evaluation with QM - related Tables information only .
    Thanks for your help
    Nic

    T147   - Control table for vendor evaluation
    T147A - Definition for main criteria
    T147B - Text for main criteria
    T147C - Definition for sub-criteria
    T147D - Text for sub-criteria
    T147E - Definition of weighting keys
    T147F - Description of weighting keys
    T147G - Main criteria
    T147H - Interval for delivery time statistics
    T147I - Definition of sub-criteria for the main criteria
    T147J - Weighting keys
    T147K - Assignment: Percentage X Score
    T147L - Intervals for quantity reliability
    T147M - Definition of scope of list
    T147N - Text for scope of list
    T147O - Scope of List
    T027A - is the table for defining shipping instructions
    T027C - specifies the points scores for compliance

  • Vendor Evaluation With Non Standard Main and Sub Criteria

    Hi Gurus
    I have a requirement wherein I  have to evaluate a vendor on non stanadard Main Criterias like
    1. Productivity  with sub criteria as Receipt / Excepected Yield, for which I have used Scoring method 2
    2.Quality Standards with Sub Criteria,- Germination (%),Genitic Purity % , Field level flags, for which i have used scoring method 7 by activating user exit- MM06L001
    3.Raw Seed to Clean Seed ratio, with the same sub criteria and with the above scoring method and user exit.
    The weightages given to the above three are 40 , 35 and  25 respectively.
    Can you please tell me how to calculate the values for subcriterias( for example for my main criteria 2. i want to assign the weightaghes for sub criterias - Germination - 50 , Genitic Purity %- 30, & Field level flags - 20, . along with smoothin factors.
    I want to automise the whole process and run the evaluation in the background.
    An early reply will be very helpful to me.
    thanks and regards
    Ashok Kumar Pitla

    T147   - Control table for vendor evaluation
    T147A - Definition for main criteria
    T147B - Text for main criteria
    T147C - Definition for sub-criteria
    T147D - Text for sub-criteria
    T147E - Definition of weighting keys
    T147F - Description of weighting keys
    T147G - Main criteria
    T147H - Interval for delivery time statistics
    T147I - Definition of sub-criteria for the main criteria
    T147J - Weighting keys
    T147K - Assignment: Percentage X Score
    T147L - Intervals for quantity reliability
    T147M - Definition of scope of list
    T147N - Text for scope of list
    T147O - Scope of List
    T027A - is the table for defining shipping instructions
    T027C - specifies the points scores for compliance

  • HOW TO SAVE DATA FROM TABLE A AND TABLE B INTO TABLE C

    Hi,
    I have a table called EMPLOYEE , GROUP and EMPLOYEE_GROUP
    table EMPLOYEE contains emp_id, emp_name, emp_dep and emp_level
    table GROUP contains group_id and group_description
    table EMPLOYEE_GROUP contains emp_id and group_id (emp_id is a primary key)
    I want to assign each employee to a group based on their department and level..
    How can I assign many employees to one group?
    But each group have the limit number.
    My screen would be :
    1. search employees based on their department and level
    2. assign each employees to a group
    *3. save the data into table EMPLOYEE_GROUP (where the process should save the emp_id and group_id into table EMPLOYEE_GROUP)*
    Thank you in advance!

    Hi Rakesh,
    Thank you for your valuable information that you post...
    I made 1 to many relationship between employee and group.
    I want to assign each employee to a group...so one employee can only have one group but one group can contains many employees..
    When I run the application, I have an error when i try to save many employees into one group...
    master table is group, detail table is employee
    error : Too many objects match the primary key oracle.jbo.Key
    Hope that you could help me with this..
    Thank You.

  • Reading data from tables SXMSCLUP and SXMSCLUR

    Hello!
    In BI 7.0, there is no Delta Q for loading XML data. We are using a functional module in ABAP proxy, to push data from XI directly into BI PSA.So in the PSA, we get the records which have successfully reached.
    But for the failed records, we can see them in XML format in the tcode :SXMB_MONI.
    Now, my requirement is to extract the primary key of the data in the payload and create a csv file, saying that this records have failed.
    For that, i found that the data is stored in tables SXMSCLUP and SXMSCLUR, but in Hexadecimal format, i.e. kind of encrypted.
    I was wondering how to extract and read this data... that too, only 1 field in the data?
    In SDN there is a post which gives some Java classes, but i was hoping if there is an easier way out, maybe in ABAP??
    Any help in this would be appreciated.

    HI,
    Please try to see the below links
    /people/kamaljeet.kharbanda/blog/2005/09/16/xi-bi-integration
    /people/sergio.locatelli2/blog/2006/10/15/integration-sap-bi-and-xi-a-critical-point-of-view
    /people/marian.harris/blog/2005/06/23/need-to-get-a-sap-netweaver-component-implemented-quickly-try-sap-best-practices
    /people/sravya.talanki2/blog/2006/12/08/business-case-integration-need-of-bi-and-sap-xi-episode1
    /people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
    /people/community.user/blog/2007/01/08/access-netweaver-how-to-guides-from-one-consolidated-page
    /people/sravya.talanki2/blog/2006/12/14/business-case-integration-need-of-bi-and-sap-xi-episode2
    See the michal's reply and other reply also how to see the blob fields data.
    In Which Database Table the Messages are Stored in XI
    Regards
    Chilla

  • Tracing Vendor Evaluation Data

    Hi friends,
    I want to trace detail of Vendor Evaluation results. For example for a one vendor evaluation we used 5 different control party result. I would like to see this 5 value. Is it poosible? How?
    Thanks, have a nice day

    Thank you for your reply. Of course checked ME65. For example.
    Vendor valuated for 120 days. Purchased  raw material with 4 different order. Created 6 different control party. Now when I check the evaluation report at ME65.
    X Vendor
    Purchasing score %100
    Quality score %75
    @detail.
    Quality score %75. Which control parties created for this score? How can I understand??

  • Question on data in tables HRP1000 and HRP1001

    Hello,
    we are in the process of putting in the SAP HR module. I have been asked by th Business analyst about entries  already existing the HR OM space (HRP1000 and HRP1001).
    I was not involved when this was being created. I am thinking that we are using  org structures s for workflow notification purposes only.
    would there be anything thing else that we would be using this for?
    thanks

    Hello Timothy,
    there are a lot of applications from HR but also other components which use the tables HRP1000 and HRP1001. But there might be another source of the entries in the tables. All HR infotype tables are delivered as type C (customizing) tables. As a result sap delivers tons of garbage entries for these tables.
    There is sap note 547031 which describes that the HR tables have to be excluded when doing a client copy with ustomizing so these garbage entries are not copied. I have seen several systems where this note has not been applied especially if the HR modules were not in focus when setting up the system. As far as I have experienced you can identify such entries as they have the value "SAP" in the UNAME field of the infotype.
    Kind Regrads
    Roman

  • Making data in tables online and offline - Backup and Recovery

    Hi All,
    I'm working on a project where the functionality is similar to 'Backup and Recovery' for database tables.
    Lets say we have a set of 6 tables T1, T2.... T6. They do have relationship between them. The tables in questions are simple standard tables, which are not table partitioned.
    - I want remove the records from live tables based on user entered date ranges and store it in some offline medium.
    - I might want make the data online again from the offline medium; Application should be able use that data without any modifications.
    - Different offline mediums can be
    a) Flat file
    b) Different table space
    c) Any other secondary medium (like XML, tape..Etc,)
    The total number of records will run in millions.
    The proposed solution should consider,
    1. Performance - Java solutions not feasible. Anything in SQL, PL/SQL or runs in DB itself(tools) are OK.
    2. Reliability - Should be highly reliable, Data corruption simply unacceptable.
    3. Security - Users should not be able to make out of the file.
    Few options include:
    1. Use partition
    2. Use SQL*Loader
    3. Export and import of tables.
    My main targets:
    1. Reduce space.
    2. Increase performance for queries.
    Please pass on your suggestions, any help is highly appreciated!
    Thanks In Advance!

    Few points to note:
    1. I agree partition would be right solution, but as I mentioned in my earlier statement, 'The tables in questions are simple standard tables, which are not table partitioned.'. The tables right now are not partitioned and I believe we cannot add/modify partitions, if the table were not created with the partition option. One work around is to build a partitioned table and copying all the properties(indexes,rows,constraints) from the existing non-partitioned table. But I suspect this is highly riskier and we can't afford to it.
    2. I need to support Oracle database versions starting from 8.0.6.
    3. Flat file is mandatory, others are optional. I can restrict our discussion just for a file.
    4. Considering the above points, the only option I could think of is I can move the records from the table to flat file and remove from tables. When required rollback the file data to the table and application would be able to use it. For export/import few options are: SQL*loader, exp/imp utilities, PL/SQL file UTL packages
    Thanks In Advance

  • Making data in tables online and offline - Backup/Recovery for tables.

    Hi All,
    I'm working on a project where the functionality is similar to 'Backup and Recovery' for database tables.
    Lets say we have a set of 6 tables T1, T2.... T6. They do have relationship between them. The tables in questions are simple standard tables, which are not table partitioned.
    - I want remove the records from live tables based on user entered date ranges and store it in some offline medium.
    - I might want make the data online again from the offline medium; Application should be able use that data without any modifications.
    - Different offline mediums can be
    a) Flat file
    b) Different table space
    c) Any other secondary medium (like XML, tape..Etc,)
    The total number of records will run in millions.
    The proposed solution should consider,
    1. Performance - Java solutions not feasible. Anything in SQL, PL/SQL or runs in DB itself(tools) are OK.
    2. Reliability - Should be highly reliable, Data corruption simply unacceptable.
    3. Security - Users should not be able to make out of the file.
    Few options include:
    1. Use partition
    2. Use SQL*Loader
    3. Export and import of tables.
    My main targets:
    1. Reduce space.
    2. Increase performance for queries.
    Please pass on your suggestions, any help is highly appreciated!
    Thanks In Advance!

    If you truely need to get the data out of the Oracle database into flat files, partitioning is pretty useless. Partitioning the table, though, strikes me as by far the most efficient, reliable, and secure solution.
    What sort of security do you need with the flat file? Do you need the data in the file to be encrypted, or is the binary file format of an Oracle export file sufficiently obfuscated?
    I'd stay away from UTL_FILE here, just because performance is rather poor.
    I always get pretty nervous about recoverability when people start moving data out of the database to flat files for long-term archival.
    - If you ever change the data model, even slightly, you may not be able to move the data back into the database without modifying your loader. A few years down the line, after a few data model changes, it can be almost impossible to find the documentation to make that change.
    - If you do things like change lookup tables over time, reloading data can cause major problems. When you load the data back in, your applications and reports may not treat the old codes properly.
    - Making sure that the flat files get stored and tagged properly can be a challenge. When the database gets moved to new system, you have to make sure that all the flat files also get moved around and the the loader scripts are modified appropriately.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • Reading the data from table control and write log.

    Hi all,
       In va01 trasaction i have table control 'All item'.
       I want to write value of some columns,( Article no, Order, plant ) so on into ecatt Log file after saving the trasction, for all rows which is having article no.
       Is there any possibility in eCATT with going to GETGUI function which is static to spacefic field.
    Regards,
    Sree

    Hi Sreedhar,
    There are two types of variable values you find in transactions, one system generated(generally the unique values) and then the static field values..
    When you want to go for the static field values you can use GETGUI. You can use the same GETGUI n number of times according to the situation(like in loops etc) and for the system generated messages we can handle them from the message blocks.
    MESSAGE.
    ENDMESSAGE.
    In the message block make a rule for the message that you are expecting like
    'E' MSGNR(the message number) and give a variable in the fields MSGV1/MSGV2 where ever you are getting the unique generated value(according to the log) and you can use that variable for LOG purpose..
    Confirm me whether you were looking for this or something else.
    Best regards,
    Harsha

Maybe you are looking for