Vendor Information in BSEG for RMRP Typed Transactions

Hello All,
I have been asking to inquire how can we get the Vendor into BSEG for RMRP-typed transactions. We do see the Vendor in BSEG for RMWE-typed transactions. I would think that an invoice receipt could carry the vendor to BSEG just an good receipt.
Can anyone provide some insight on this?
Regards, Dean.

Cancelled

Similar Messages

I Need Interactive Report for displaying vendor information. Based on the s

Interactive Report for displaying vendor information. Based on the selection made by the corresponding Vendor Bank Details are listed such that the line selected in the basic list was visible along with the secondary list.

hi
Hi
Use the Table LFA1 and LFB1 in the basic list
and LFBK table details in the secondary list
see the sample code related to customer Sales orders
modify it with the Vendor tables
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
<b>Vendor performance report</b>
See this sample code
*"Table declarations...................................................
TABLES:
EKKO, " Purchasing Document Header
CDHDR, " Change document header
SSCRFIELDS. " Fields on selection screens
*"Selection screen elements............................................
SELECT-OPTIONS:
S_EBELN FOR EKKO-EBELN, " Purchasing Document Number
S_LIFNR FOR EKKO-LIFNR, " Vendor's account number
S_EKGRP FOR EKKO-EKGRP, " Purchasing group
S_BEDAT FOR EKKO-BEDAT, " Purchasing Document Date
S_UDATE FOR CDHDR-UDATE. " Creation date of the change
" document
*" Data declarations...................................................
Field String to hold Purchase Document Number *
DATA:
BEGIN OF FS_EBELN,
EBELN(90) TYPE C, " Purchase Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created
" the Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EBELN,
Field String to hold Purchase Document Header *
BEGIN OF FS_EKKO,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
END OF FS_EKKO,
Field String to hold Account Number and name of the Vendor *
BEGIN OF FS_LFA1,
LIFNR TYPE LFA1-LIFNR, " Account Number of Vendor
NAME1 TYPE LFA1-NAME1, " Name1
END OF FS_LFA1,
Field String to hold Change date and the name of the user *
BEGIN OF FS_CDHDR,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS, " Object Class
OBJECTID TYPE CDHDR-OBJECTID, " Object value
CHANGENR TYPE CDHDR-CHANGENR, " Document change number
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
END OF FS_CDHDR,
Field String to hold Change document items *
BEGIN OF FS_CDPOS,
OBJECTCLAS TYPE CDPOS-OBJECTCLAS," Object class
OBJECTID(10) TYPE C, " Object Value
CHANGENR TYPE CDPOS-CHANGENR, " Document change number
TABNAME TYPE CDPOS-TABNAME, " Table Name
FNAME TYPE CDPOS-FNAME, " Field Name
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_CDPOS,
Field String to hold Date Element Name *
BEGIN OF FS_DATAELE,
TABNAME TYPE DD03L-TABNAME, " Table Name
FIELDNAME TYPE DD03L-FIELDNAME, " Field Name
ROLLNAME TYPE DD03L-ROLLNAME, " Data element (semantic domain)
END OF FS_DATAELE,
Field String to hold Short Text of the Date Element *
BEGIN OF FS_TEXT,
ROLLNAME TYPE DD04T-ROLLNAME, " Data element (semantic domain)
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
END OF FS_TEXT,
Field String to hold data to be displayed on the ALV grid *
BEGIN OF FS_OUTTAB,
EBELN TYPE EKKO-EBELN, " Purchasing Document Number
ERNAM TYPE EKKO-ERNAM, " Name of Person who Created the
" Object
LIFNR TYPE EKKO-LIFNR, " Vendor's account number
EKGRP TYPE EKKO-EKGRP, " Purchasing group
BEDAT TYPE EKKO-BEDAT, " Purchasing Document Date
WERKS TYPE LFA1-WERKS, " Plant
NAME1 TYPE LFA1-NAME1, " Name1
USERNAME TYPE CDHDR-USERNAME, " User name
UDATE TYPE CDHDR-UDATE, " Creation date of the change
" document
DDTEXT TYPE DD04T-DDTEXT, " Short Text Describing R/3
" Repository Objects
VALUE_NEW TYPE CDPOS-VALUE_NEW, " New contents of changed field
VALUE_OLD TYPE CDPOS-VALUE_OLD, " Old contents of changed field
END OF FS_OUTTAB,
Internal table to hold Purchase Document Number *
T_EBELN LIKE STANDARD TABLE
OF FS_EBELN,
Internal table to hold Purchase Document Header *
T_EKKO LIKE STANDARD TABLE
OF FS_EKKO,
Temp Internal table to hold Purchase Document Header *
T_EKKO_TEMP LIKE STANDARD TABLE
OF FS_EKKO,
Internal table to hold Account number and Name of the Vendor *
T_LFA1 LIKE STANDARD TABLE
OF FS_LFA1,
Internal Table to hold Change date and the name of the user *
T_CDHDR LIKE STANDARD TABLE
OF FS_CDHDR,
Internal Table to hold Change document items *
T_CDPOS LIKE STANDARD TABLE
OF FS_CDPOS,
Temp. Internal Table to hold Change document items *
T_CDPOS_TEMP LIKE STANDARD TABLE
OF FS_CDPOS,
Internal Table to hold Data Element Name *
T_DATAELE LIKE STANDARD TABLE
OF FS_DATAELE,
Temp. Internal Table to hold Data Element Name *
T_DATAELE_TEMP LIKE STANDARD TABLE
OF FS_DATAELE,
Internal Table to hold Short Text of the Date Element *
T_TEXT LIKE STANDARD TABLE
OF FS_TEXT,
Internal Table to hold data to be displayed on the ALV grid *
T_OUTTAB LIKE STANDARD TABLE
OF FS_OUTTAB.
C L A S S D E F I N I T I O N *
CLASS LCL_EVENT_HANDLER DEFINITION DEFERRED.
*" Data declarations...................................................
Work variables *
DATA:
W_EBELN TYPE EKKO-EBELN, " Purchasing Document Number
W_LIFNR TYPE EKKO-LIFNR, " Vendor's account number
W_EKGRP TYPE EKKO-EKGRP, " Purchasing group
W_VALUE TYPE EKKO-EBELN, " Reflected Value
W_SPACE VALUE ' ', " Space
W_FLAG TYPE I, " Flag Variable
W_VARIANT TYPE DISVARIANT, " Variant
*--- ALV Grid
W_GRID TYPE REF TO CL_GUI_ALV_GRID,
*--- Event Handler
W_EVENT_CLICK TYPE REF TO LCL_EVENT_HANDLER,
*--- Field catalog table
T_FIELDCAT TYPE LVC_T_FCAT.
AT SELECTION-SCREEN EVENT *
AT SELECTION-SCREEN ON S_EBELN.
Subroutine to validate Purchase Document Number.
PERFORM VALIDATE_PD_NUM.
AT SELECTION-SCREEN ON S_LIFNR.
Subroutine to validate Vendor Number.
PERFORM VALIDATE_VEN_NUM.
AT SELECTION-SCREEN ON S_EKGRP.
Subroutine to validate Purchase Group.
PERFORM VALIDATE_PUR_GRP.
START-OF-SELECTION EVENT *
START-OF-SELECTION.
Subroutine to select all Purchase orders.
PERFORM SELECT_PO.
CHECK W_FLAG EQ 0.
Subroutine to select Object values.
PERFORM SELECT_OBJ_ID.
CHECK W_FLAG EQ 0.
Subroutine to select Changed values.
PERFORM SELECT_CHANGED_VALUE.
CHECK W_FLAG EQ 0.
Subroutine to Select Purchase Orders.
PERFORM SELECT_PUR_DOC.
Subroutine to select Vendor Details.
PERFORM SELECT_VENDOR.
Subroutine to select Text for the Changed values.
PERFORM DESCRIPTION.
END-OF-SELECTION EVENT *
END-OF-SELECTION.
IF NOT T_EKKO IS INITIAL.
Subroutine to populate the Output Table.
PERFORM FILL_OUTTAB.
Subroutine to build Field Catalog.
PERFORM PREPARE_FIELD_CATALOG CHANGING T_FIELDCAT.
CALL SCREEN 100.
ENDIF. " IF NOT T_EKKO...
CLASS LCL_EVENT_HANDLER DEFINITION
Defining Class which handles events
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
METHODS:
HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID E_COLUMN_ID.
ENDCLASS. " LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION
Implementing the Class which can handle events
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
*---Handle Double Click
METHOD HANDLE_HOTSPOT_CLICK .
Subroutine to get the HotSpot Cell information.
PERFORM GET_CELL_INFO.
SET PARAMETER ID 'BES' FIELD W_VALUE.
CALL TRANSACTION 'ME23N'.
ENDMETHOD. " HANDLE_HOTSPOT_CLICK
ENDCLASS. " LCL_EVENT_HANDLER
*& Module STATUS_0100 OUTPUT
PBO Event
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'OOPS'.
SET TITLEBAR 'TIT'.
Subroutine to fill the Variant Structure
PERFORM FILL_VARIANT.
IF W_GRID IS INITIAL.
CREATE OBJECT W_GRID
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
I_PARENT = CL_GUI_CONTAINER=>SCREEN0
I_APPL_EVENTS =
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT = W_VARIANT
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = T_OUTTAB
IT_FIELDCATALOG = T_FIELDCAT
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. " IF SY-SUBRC <> 0.
ENDIF. " IF W_GRID IS INITIAL
CREATE OBJECT W_EVENT_CLICK.
SET HANDLER W_EVENT_CLICK->HANDLE_HOTSPOT_CLICK FOR W_GRID.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
PAI Event
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form PREPARE_FIELD_CATALOG
Subroutine to build the Field catalog
<--P_T_FIELDCAT Field Catalog Table
FORM PREPARE_FIELD_CATALOG CHANGING PT_FIELDCAT TYPE LVC_T_FCAT .
DATA LS_FCAT TYPE LVC_S_FCAT.
Purchasing group...
LS_FCAT-FIELDNAME = 'EKGRP'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Number...
LS_FCAT-FIELDNAME = 'EBELN'.
LS_FCAT-REF_TABLE = 'EKKO' .
LS_FCAT-EMPHASIZE = 'C411'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-HOTSPOT = 'X'.
APPEND LS_FCAT TO PT_FIELDCAT .
CLEAR LS_FCAT .
Name of Person who Created the Object...
LS_FCAT-FIELDNAME = 'ERNAM'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-OUTPUTLEN = '15' .
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Purchasing Document Date...
LS_FCAT-FIELDNAME = 'BEDAT'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Vendor's account number...
LS_FCAT-FIELDNAME = 'LIFNR'.
LS_FCAT-REF_TABLE = 'EKKO'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Account Number of Vendor or Creditor...
LS_FCAT-FIELDNAME = 'NAME1'.
LS_FCAT-REF_TABLE = 'LFA1'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Vendor Name'(001).
LS_FCAT-SELTEXT = 'Vendor Name'(001).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Creation date of the change document...
LS_FCAT-FIELDNAME = 'UDATE'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Change Date'(002).
LS_FCAT-SELTEXT = 'Change Date'(002).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
User name of the person responsible in change document...
LS_FCAT-FIELDNAME = 'USERNAME'.
LS_FCAT-REF_TABLE = 'CDHDR'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '10'.
LS_FCAT-COLTEXT = 'Modified by'(003).
LS_FCAT-SELTEXT = 'Modified by'(003).
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Short Text Describing R/3 Repository Objects...
LS_FCAT-FIELDNAME = 'DDTEXT'.
LS_FCAT-REF_TABLE = 'DD04T'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '15'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
Old contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_OLD'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
New contents of changed field...
LS_FCAT-FIELDNAME = 'VALUE_NEW'.
LS_FCAT-REF_TABLE = 'CDPOS'.
LS_FCAT-INTTYPE = 'C'.
LS_FCAT-OUTPUTLEN = '12'.
APPEND LS_FCAT TO PT_FIELDCAT.
CLEAR LS_FCAT.
ENDFORM. " PREPARE_FIELD_CATALOG
*& Form SELECT_PO
Subroutine to select all the Purchase Orders
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PO .
SELECT EBELN " Purchasing Document Number
ERNAM " Name of Person who Created
" the Object
LIFNR " Vendor's account number
EKGRP " Purchasing group
BEDAT " Purchasing Document Date
FROM EKKO
PACKAGE SIZE 10000
APPENDING TABLE T_EBELN
WHERE EBELN IN S_EBELN
AND BEDAT IN S_BEDAT.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S401(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDFORM. " SELECT_PO
*& Form SELECT_OBJ_ID
Subroutine to select Object ID
There are no interface parameters to be passed to this subroutine.
FORM SELECT_OBJ_ID .
IF NOT T_EBELN IS INITIAL.
SELECT OBJECTCLAS " Object Class
OBJECTID " Object value
CHANGENR " Document change number
USERNAME " User name
UDATE " Creation date
FROM CDHDR
INTO TABLE T_CDHDR
FOR ALL ENTRIES IN T_EBELN
WHERE OBJECTID EQ T_EBELN-EBELN
AND UDATE IN S_UDATE
AND TCODE IN ('ME21N','ME22N','ME23N').
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Header Not Found'(031).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EBELN IS INITIAL
ENDFORM. " SELECT_OBJ_ID
*& Form SELECT_CHANGED_VALUE
Subroutine to select Changed Values
There are no interface parameters to be passed to this subroutine.
FORM SELECT_CHANGED_VALUE .
IF NOT T_CDHDR IS INITIAL.
SELECT OBJECTCLAS " Object class
OBJECTID " Object value
CHANGENR " Document change number
TABNAME " Table Name
FNAME " Field Name
VALUE_NEW " New contents of changed field
VALUE_OLD " Old contents of changed field
FROM CDPOS
PACKAGE SIZE 10000
APPENDING TABLE T_CDPOS
FOR ALL ENTRIES IN T_CDHDR
WHERE OBJECTCLAS EQ T_CDHDR-OBJECTCLAS
AND OBJECTID EQ T_CDHDR-OBJECTID
AND CHANGENR EQ T_CDHDR-CHANGENR.
ENDSELECT.
IF SY-SUBRC NE 0.
W_FLAG = 1.
MESSAGE S833(M8) WITH 'Item Not Found'(032).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_CDHDR IS INITIAL
T_CDPOS_TEMP[] = T_CDPOS[].
ENDFORM. " SELECT_CHANGED_VALUE
*& Form SELECT_PUR_DOC
Subroutine to select Purchase Order Details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_PUR_DOC .
IF NOT T_CDPOS IS INITIAL.
SORT T_EBELN BY EBELN.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_EBELN INTO FS_EBELN WITH KEY EBELN =
FS_CDPOS-OBJECTID BINARY SEARCH.
IF SY-SUBRC NE 0.
DELETE TABLE T_EBELN FROM FS_EBELN.
ENDIF. " IF SY-SUBRC NE 0.
ENDLOOP. " LOOP AT T_CDPOS...
LOOP AT T_EBELN INTO FS_EBELN.
MOVE FS_EBELN-EBELN TO FS_EKKO-EBELN.
MOVE FS_EBELN-ERNAM TO FS_EKKO-ERNAM.
MOVE FS_EBELN-LIFNR TO FS_EKKO-LIFNR.
MOVE FS_EBELN-EKGRP TO FS_EKKO-EKGRP.
MOVE FS_EBELN-BEDAT TO FS_EKKO-BEDAT.
APPEND FS_EKKO TO T_EKKO.
ENDLOOP. " LOOP AT T_EBELN...
T_EKKO_TEMP[] = T_EKKO[].
ENDIF. " IF NOT T_CDPOS IS INITIAL
ENDFORM. " SELECT_PUR_DOC
*& Form SELECT_VENDOR
Subroutine to select Vendor details
There are no interface parameters to be passed to this subroutine.
FORM SELECT_VENDOR .
IF NOT T_EKKO IS INITIAL.
SORT T_EKKO_TEMP BY LIFNR.
DELETE ADJACENT DUPLICATES FROM T_EKKO_TEMP COMPARING LIFNR.
SELECT LIFNR " Account Number of Vendor or
" Creditor
NAME1 " Name 1
FROM LFA1
INTO TABLE T_LFA1
FOR ALL ENTRIES IN T_EKKO_TEMP
WHERE LIFNR EQ T_EKKO_TEMP-LIFNR.
IF SY-SUBRC NE 0.
MESSAGE S002(M8) WITH 'Master Details'(033).
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_EKKO IS INITIAL
ENDFORM. " SELECT_VENDOR
*& Form DESCRIPTION
Subroutine to get the description
There are no interface parameters to be passed to this subroutine.
FORM DESCRIPTION .
IF NOT T_CDPOS IS INITIAL.
SORT T_CDPOS_TEMP BY TABNAME FNAME.
DELETE ADJACENT DUPLICATES FROM T_CDPOS_TEMP COMPARING TABNAME FNAME
SELECT TABNAME " Table Name
FIELDNAME " Field Name
ROLLNAME " Data element
FROM DD03L
INTO TABLE T_DATAELE
FOR ALL ENTRIES IN T_CDPOS_TEMP
WHERE TABNAME EQ T_CDPOS_TEMP-TABNAME
AND FIELDNAME EQ T_CDPOS_TEMP-FNAME.
IF NOT T_DATAELE IS INITIAL.
T_DATAELE_TEMP[] = T_DATAELE[].
SORT T_DATAELE_TEMP BY ROLLNAME.
DELETE ADJACENT DUPLICATES FROM T_DATAELE_TEMP COMPARING ROLLNAME.
SELECT ROLLNAME " Data element
DDTEXT " Short Text Describing R/3
" Repository Objects
FROM DD04T
INTO TABLE T_TEXT
FOR ALL ENTRIES IN T_DATAELE_TEMP
WHERE ROLLNAME EQ T_DATAELE_TEMP-ROLLNAME
AND DDLANGUAGE EQ SY-LANGU.
IF SY-SUBRC NE 0.
EXIT.
ENDIF. " IF SY-SUBRC NE 0.
ENDIF. " IF NOT T_DATAELE IS INITIAL.
ENDIF. " IF NOT T_CDPOS IS INITIAL.
ENDFORM. " DESCRIPTION
*& Form FILL_OUTTAB
Subroutine to populate the Outtab
There are no interface parameters to be passed to this subroutine.
FORM FILL_OUTTAB .
SORT T_CDHDR BY OBJECTCLAS OBJECTID CHANGENR.
SORT T_EKKO BY EBELN.
SORT T_LFA1 BY LIFNR.
SORT T_DATAELE BY TABNAME FIELDNAME.
SORT T_TEXT BY ROLLNAME.
LOOP AT T_CDPOS INTO FS_CDPOS.
READ TABLE T_CDHDR INTO FS_CDHDR WITH KEY
OBJECTCLAS = FS_CDPOS-OBJECTCLAS
OBJECTID = FS_CDPOS-OBJECTID
CHANGENR = FS_CDPOS-CHANGENR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_CDHDR-USERNAME TO FS_OUTTAB-USERNAME.
MOVE FS_CDHDR-UDATE TO FS_OUTTAB-UDATE.
READ TABLE T_EKKO INTO FS_EKKO WITH KEY
EBELN = FS_CDHDR-OBJECTID
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_EKKO-EBELN TO FS_OUTTAB-EBELN.
MOVE FS_EKKO-ERNAM TO FS_OUTTAB-ERNAM.
MOVE FS_EKKO-LIFNR TO FS_OUTTAB-LIFNR.
MOVE FS_EKKO-EKGRP TO FS_OUTTAB-EKGRP.
MOVE FS_EKKO-BEDAT TO FS_OUTTAB-BEDAT.
READ TABLE T_LFA1 INTO FS_LFA1 WITH KEY
LIFNR = FS_EKKO-LIFNR
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_LFA1-NAME1 TO FS_OUTTAB-NAME1.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
MOVE FS_CDPOS-VALUE_NEW TO FS_OUTTAB-VALUE_NEW.
MOVE FS_CDPOS-VALUE_OLD TO FS_OUTTAB-VALUE_OLD.
READ TABLE T_DATAELE INTO FS_DATAELE WITH KEY
TABNAME = FS_CDPOS-TABNAME
FIELDNAME = FS_CDPOS-FNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
READ TABLE T_TEXT INTO FS_TEXT WITH KEY
ROLLNAME = FS_DATAELE-ROLLNAME
BINARY SEARCH.
IF SY-SUBRC EQ 0.
MOVE FS_TEXT-DDTEXT TO FS_OUTTAB-DDTEXT.
ENDIF. " IF SY-SUBRC EQ 0.
ENDIF. " IF SY-SUBRC EQ 0.
APPEND FS_OUTTAB TO T_OUTTAB.
CLEAR FS_OUTTAB.
ENDLOOP.
ENDFORM. " FILL_OUTTAB
*& Form GET_CELL_INFO
Subroutine to get the Cell Information
--> W_VALUE Holds the value of Hotspot clicked
FORM GET_CELL_INFO .
CALL METHOD W_GRID->GET_CURRENT_CELL
IMPORTING
E_ROW =
E_VALUE = W_VALUE
E_COL =
ES_ROW_ID =
ES_COL_ID =
ES_ROW_NO =
ENDFORM. " GET_CELL_INFO
*& Form VALIDATE_PD_NUM
Subroutine to validate Purchase Document Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PD_NUM .
IF NOT S_EBELN[] IS INITIAL.
SELECT EBELN " Purchase Document Number
FROM EKKO
INTO W_EBELN
UP TO 1 ROWS
WHERE EBELN IN S_EBELN.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E717(M8).
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EBELN[]...
ENDFORM. " VALIDATE_PD_NUM
*& Form VALIDATE_VEN_NUM
Subroutine to validate Vendor Number
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_VEN_NUM .
IF NOT S_LIFNR[] IS INITIAL.
SELECT LIFNR " Vendor Number
FROM LFA1
INTO W_LIFNR
UP TO 1 ROWS
WHERE LIFNR IN S_LIFNR.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E002(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_LIFNR[]...
ENDFORM. " VALIDATE_VEN_NUM
*& Form VALIDATE_PUR_GRP
Subroutine to validate the Purchase Group
There are no interface parameters to be passed to this subroutine.
FORM VALIDATE_PUR_GRP .
IF NOT S_EKGRP[] IS INITIAL.
SELECT EKGRP " Purchase Group
FROM T024
INTO W_EKGRP
UP TO 1 ROWS
WHERE EKGRP IN S_EKGRP.
ENDSELECT.
IF SY-SUBRC NE 0.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E622(M8) WITH W_SPACE.
ENDIF. " IF SY-SUBRC NE 0
ENDIF. " IF NOT S_EKFRP[]...
ENDFORM. " VALIDATE_PUR_GRP
*& Form FILL_VARIANT
Subroutine to fill the Variant Structure
There are no interface parameters to be passed to this subroutine
FORM FILL_VARIANT .
Filling the Variant structure
W_VARIANT-REPORT = SY-REPID.
W_VARIANT-USERNAME = SY-UNAME.
ENDFORM. " FILL_VARIANT
<b>Reward if usefull</b>

FBCJ Error - Enter a vendor for this accounting transaction

Dear Experts,
I am trying to enter expenses and I have mentioned Vendor Account No. in the Vendor field using splitting option with combination of Vendor Pay/Rec and All Expenses Business Transaction. But the document is not getting posted and giving the error - "Enter a vendor for this accounting transaction". But if I dont use split option it saves.
This problem I am facing for the last 2 days only. Can you suggest what could be the reason for this error.
Thanks,
Deb

Dear !!!
I have done everything as you suggested, but it is still showing the same message. Can you please look in to this again.
Thanks in advance !!!!
Deb

Vendor information for some material's is missing in the report ?

Hi,
One of my user has raised a request that the vendor information for some material is not displayed in report where as its available in ECC, now i have checked in BI that information for 20 material numbers is missing even in BI that is the reason not showing in the report. Now what do I do ? Can you please suggest.

Kindly update the master data table for material and vendor.....

INTERACTIVE REPORTING FOR VENDOR INFORMATION

how to Handle the interactive report for displaying vendor information based on the selection made the corresponding vendor bank details are listed such that the line selected in the basic list was visible along with the secondary list.

Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
OOPS OO ABAP
http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
DIRLL DOWN AND INTERACTIVE REPORT
http://www.sap-img.com/abap/difference-between-drilldown-report-and-interactive-report.htm
Rewards if useful................
Minal

Vendor information in GL

Hello all,
I have doubt in GL. Can I get vendor information and Invoice details in GL.
Please guide me to understand...
Thanks and Regards,
Muthu

Hi Kevin,
Try using a screen variant using transaction SHD0. You can check for an existing variant using the program (SAPLFDCB) and screen number (70). Use the system/status menu path from FB60 to find the program if the one I provided doesn't work.
If a screen variant doesn't exist, create a new one. The available fields from the vendor master may be limited. You can research adding new ones if they are not in the list. You can hide or display existing fields.
Good luck!
KF

Vendor Information in FB60

Hello,
Is it possible to modify what vendor master data information is displayed in FB60 in the Vendor information box to the right of the header tabs? Currently we are only seeing address information and would like to add additional fields from the vendor master.
Thanks.

Hi Kevin,
Try using a screen variant using transaction SHD0. You can check for an existing variant using the program (SAPLFDCB) and screen number (70). Use the system/status menu path from FB60 to find the program if the one I provided doesn't work.
If a screen variant doesn't exist, create a new one. The available fields from the vendor master may be limited. You can research adding new ones if they are not in the list. You can hide or display existing fields.
Good luck!
KF

Can U Think of Any Situation Where U Find VENDOR Info. Populated for a STO?

Hi,
Can you think of any situation where you will find VENDOR information populated for a STO moving stock from a Plant to Store under the same company code?
I got an error ("Enter goods for vendor XXXX only") and this was triggered by the fact that one STO had vendor information in the delivery document. The outcome of this was that every STO beneath this STO could not be GR, but every STO before and including the STO were GR without any issues....
Your response is higly appreciated..
Thanks

SegeTx,
I am not sure exactly what you mean when you say "Vendor information populated for an STO". Is this a UB STO?
Tell me exactly what transaction you are performing, and the data you are entering, when you get the GR error.
Generally, when you set up master data for a STO, you have to assign a vendor to the plant. It is possible that somehow the source plant has become un-assigned from the vendor. WB03, clik past any warnings, enter the plant. In the upper right corner, there should be a vendor. If nothing is there, then you have to re-assign the vendor to the source plant. MK02 enter the vendor you wish to assign to the plant, and the purch org you should use for the STOs. Execute. Select extras > addl purch data. enter the plant. Save.
Best Regards,
DB49

MEB8 No updating of vendor business volumes defined for time 'Purchase ord

Hello,
I am checking transaction MEB8 in order to know my errors with the Vendor rebate and I have this error message:
No updating of vendor business volumes defined for time 'Purchase order'
Message no. MN595
Diagnosis
The operative update of the business volumes is to take place at the time of 'Invoice verification'. At the current time of update 'Purchase order', there are thus no business volumes to be updated.
System Response
The update data was made ready but no operative update is due within the framework of subsequent (end-of-period rebate) settlement.
You can use the update data to update your own information structures.
How I can resolve it?
Could you help please?
Kind regards,
SP

Hi Jürgen,
Thanks for the SAP note!
Kind regards,
SP

To update the BSEG TABLE in MIRO transaction (when saving)

Hi,
When MIRO transaction is saved, an user-exit should be triggered to update the 3 fields like ESRNR,ESRRE & ZLSPR Now what I am looking is , to update the 3 fields in tables BKPF or BSEG. Because when a MIRO is saved , 2 document number is created (1 in Accounting document and the other in Invoice document ).
So is there any user-exit or BADI to update BSEG /BKPF in transaction MIRO.
Kindly help me
It is very urgent.
Thanks in advance
Points will be rewarded.

check in se18.
MRM_HEADER_CHECK     BAdI for Additional Checks of the Document Header Dat
MRM_HEADER_DEFAULT   BAdI for Additional Checks of the Document Header Dat
MRM_MRIS_HDAT_MODIFY BAdI for Changing Document Header Data for Invoicing
MRM_MRIS_IDAT_MODIFY BAdI for Changing Document Lines for Invoicing Plan
MRM_MRKO_HDAT_MODIFY BAdI for Changing Vendor and Document Type for Consig
MRM_PAYMENT_TERMS    BAdI for setting the terms of payment
MRM_RELEASE_CHECK    BAdI for Additional Checks Before Invoices are Releas
MRM_TOLERANCE_GROUP BAdI for setting the vendor-specific tolerance group
MRM_TRANSACT_DEFAULT BAdI for preassigning various transaction fields
MRM_UDC_DISTRIBUTE   BAdI for distributing unplanned delivery costs
MRM_WT_SPLIT_BY_ISO BADI: Country-Dependent Split of Source Control Data
MRM_WT_SPLIT_UPDATE BAdI for Changing Withholding Tax and Amount Split
search terms are MR* in se18.
User exits
Maintain Customer Exits for Invoice Verification
The following SAP enhancements are available for maintaining the customer exits in Invoice Verification:
MM08R001 ERS (conventional Invoice Verification)
MM08R002 Tolerance checks
LMR1M001 Transfer of document header and item data,
account assignment proposal for invoices for blanket
POs
LMR1M002 Account grouping for GR/IR account determination
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Item text in follow-on documents
LMR1M005 Change criteria for releasing parked documents for
posting
LMR1M006 Change XML data for BAPI call CreateFromData
RMVKON00 Consignment/pipeline settlement
MRMH0001 ERS (Logistics Invoice Verification)
MRMH0002 EDI invoice receipt (Logistics Invoice Verification)
MRMH0003 Revaluation (Logistics Invoice Verification)
MRMN0001 Message output for Invoice Verification
more info check in SPRO.
regards
Prabhu

REJECT_CODE Vendor information and/or Operating Unit information is missing

hi
i am using Oracle Applications : 11.5.10.2.
i am trying to load suppliers and suppliers data into oracle AP.
i tried doing this with some sample data.
i executed the following code below :
insert into AP_SUPPLIERS_INT (VENDOR_INTERFACE_ID, VENDOR_NAME, SEGMENT1, STATUS)
values (*10006*,'XXX Financials2','199999','NEW');
i then ran the following process:
Supplier Open Interface Import
the supplier was added without errors
i then inserted a record into the
AP_SUPPLIER_SITES_INT table :
vendor_interface_id =*10006*,
LAST_UPDATE_DATE= SYSDATE,
LAST_UPDATED_BY          ='123',
VENDOR_SITE_CODE = 'true test' ,
CREATION_DATE     =SYSDATE ,
CREATED_BY     ='123' ,
PURCHASING_SITE_FLAG= 'N' ,
PAY_SITE_FLAG     = 'Y' ,
ATTENTION_AR_FLAG     = 'N' ,
ADDRESS_LINE1     ='gmmm df' ,
ADDRESS_LINE2     ='gmmm dfdv' ,
ADDRESS_LINE3     ='gmmm dfvdd' ,
ADDRESS_LINE4     ='gmmm dfvdd' ,
PAYMENT_METHOD_LOOKUP_CODE='Check' ,
TERMS_DATE_BASIS     ='Current' ,
ACCTS_PAY_CODE_COMBINATION_ID     = '1365' ,
PREPAY_CODE_COMBINATION_ID     = '1470' ,
PAYMENT_PRIORITY     = '99' ,
TERMS_ID= '10001' ,
INVOICE_AMOUNT_LIMIT =20,
PAY_DATE_BASIS_LOOKUP_CODE     = 'DISCOUNT' ,
ALWAYS_TAKE_DISC_FLAG= 'A' ,
INVOICE_CURRENCY_CODE     ='JMD' ,
PAYMENT_CURRENCY_CODE     ='JMD' ,
HOLD_ALL_PAYMENTS_FLAG='N' ,
HOLD_FUTURE_PAYMENTS_FLAG     ='N' ,
HOLD_UNMATCHED_INVOICES_FLAG= 'N' ,
EXCLUSIVE_PAYMENT_FLAG= 'N' ,
EXCLUDE_FREIGHT_FROM_DISCOUNT     = 'N' ,
ORG_ID= '142' ,
CREATE_DEBIT_MEMO_FLAG= 'N' ,
OFFSET_TAX_FLAG= 'N'
i then ran the following process:
Supplier Sites Open Interface Import
the process completes with a status of 'Normal'.
below is an extract of the output :
Supplier Sites Open Interface Import Execution Repor Page: 1
Import Options: All
Batch Size: 1000
Print Exceptions Only: No
Sites Open Interface Audit Report
Org Id Supplier Number Supplier Name Site Name
Total Sites Imported: 0
*** No Data Exists for this Report ***
Sites Open Interface Rejections Report
Org Id Supplier Number Supplier Name Site Name Reason
Total Sites Rejected: 0
when i checked the AP_SUPPLIER_SITES_INT table ,
the REJECT_CODE field has the value *'Vendor information and/or Operating Unit information is missing.'*
I THINK ALL THE REQUIRED FIELDS ARE POPULATED
why am i recieving this error ? is this caused by a bug? is there a required field that i didn't populated ?
please help me to solve this ....
thanks much!!

Hi,
Could you please check : Doc ID: 316368.1 of Metalink...
Symptoms_+
The Supplier Site Contacts Open Interface Import program is not importing certain contact
information.
The Supplier Site Contacts Open Interface Import Execution Report shows the following Rejection
Reason:
Vendor information and/or Operating Unit information is missing
Cause_+
The Last_name field is a required field.
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
Solution_+
As per the Oracle Payables User's Guide.
Appendix G-111
AP_SUP_SITE_CONTACT_INT chart shows the LAST_NAME is a Required field
If you test this out directly in the Suppliers window in Oracle Payables:
Navigation: Suppliers-Entry
Queried up a Supplier, then clicked into the Site field under the Contact tab.
Entered the contact information and omitted the Last Name, when trying to save the record,
the system gives the following message:
*'FRM-40202: Field must be entered' and the cursor is on the Last Name field. This is a required*
field and is the intended functionality.
Hope this will help
Regards,
S.P DASH

Payment run didnt pick the open items of Vendor(special G/L for downpmnt)

Hi,
Payment run didnt pick the open items of Vendor(special G/L for downpmnt). The line item is due on 2.11.2010.
The payment run was done on 12.11.2010. Why this line was not picked?
Edited by: Rudra Prasanna Mohapatra on Nov 14, 2010 11:11 AM

Hi Rudra,
In order for the special GL's to be selected for Payment run, you need to define them in your configuration.
Go to FBZP, click on All company codes, and double click on your company code, and check whether special GL is entered in vendors>Sp. G/L transactions to be paid.
Regards,
SAPFICO

How to take a report for the assigned transaction and activity in a role

Hi Colleagues,
I want to take a report for the assigned transaction with activity for all roles, which are assigned to the users,
Transaction list for a role i can able to take it from SUIM but not able to take the ACTVT for the role.
Please suggest how to take this information.
BR,
Jai

Hi Jaikumar from the post :
I think you have reached the state of finding the USER to ROLE relationship
Take the output to an excel,
COPY just the roles column exactly in order do not rearrange , use AGR_1251 like other experts have mentioned
insert the roles copied from you buffer and execute, the output will have multiple entries for each role take the output to an EXCEL again , make it unique and match the outputs between both the EXCELS.
It will be a little tricky to do this, but I think you are proficient in MS EXCEL.
This is one of the ways to do , there are many other ways to do it.

How to select Vendor information as per the line item of the shopping cart

SRM ABAPers,
I want to create a custom report and needs to produce SC's item details with vendor's information.
So I want to select the vendor information(including the partner function- 00000019 or 00000039) as per the line item of the shopping cart, which SRM table can give me this information?
Thank you!
MP

Hi,
To get the SC item details,you an use the FM 'BBP_PD_SC_GETDETAIL".
Also to get the vendor details,you can use the FM "BBP_PARTNER_GET_PURCH_DATA_NEW".
BR,
Disha.
Pls reward points for useful answers.

Implementation of Note 660016 for Follow up Transactions in CRM 2007

Hi All,
   We have a requirement to not show all the business activities and tasks available in crm for all the transactions as follow-ups.
   For this reason we implemented the note - 660016. Now its working fine.. It is not showing business acitivities and tasks as follow-up transactions in the CRM GUI and Web UI 2007 for all the transactions.
   But when I create a business activity as a followup for ztransaction in define copying control for business transactions.. It is showing in the CRM GUI but not in the WebUI.
But at the same time when I create a service complaint as a followup for my ztransaction, I am seeing the service complaint as a follow up in both CRM GUI and Web UI.
   Is the implementation of this note restricting business activities and taks in WebUI forever or do I need to write any extra logic or is this any configuration issue ?
Regards,
Raghu
Edited by: Raghu Danda on Mar 8, 2009 1:17 PM
Edited by: Raghu Danda on Mar 9, 2009 5:14 AM

Hi Robert,
   Thanks for your reply
   I checked the link, But I didnt get the full information there.
   Firstly, my problem is not with upgrade and
   the second thing is before implementing the note 660016, I am able to see both in CRM GUI and Web
   UI all the business acitivities and tasks along with other transaction types as follow-up transactions.
   After implementing the note, I am not able to see only the business activities and tasks in the Web UI
   as follow-ups and in CRM GUI, its appearing as follow-ups.
   Hope you got my question now...
   If this is not done in customization I need to code according to my scenario..
   When I kept a break point this class is triggering from another class.
   Do I need to code in the class CL_CRM_UIU_BT_ACT_CUST_GET, according to my scenario.
   Again I have a question here, will you please tell me in which component this class exists, so that I
   will enhance that component.
   Because when I debug after clicking on the Follow-Up button,this class is calling some where
   down...So I am unbale to get the right component for this.
Regards,
Raghu
I

Vendor Information in BSEG for RMRP Typed Transactions

Similar Messages

Maybe you are looking for