Vendor Mapping in APO

Dear all,
We are having one rollout at one of our mfg location say Locaion B: The details are :
The location B is supplying parts to location A, Location A is already in supply network and to be added is location B.
Location A and Location B exists in different companies.
Location A procures final product of location B as a raw material
While that of Location B has maintained same material as finished product.
Presently Sale through sales order againest location A but manually.
Need to know how can i map in network, should i consider Location as vendor of location A and map as a vendor ?
Can anybody give me details how should map them in network.
Early reply will much more helpful.
Amol Chavan

Thank You Somnath,
  Yes it is possible to map as mfg. plant but problem is that we have mentioned same plant as vendor in SAP R/3. one location Say Location A which is in network having procured part say Generator is maintained in BOM with material no of that raw material(5000XXX) for which after SNP it will generate Pur. Req. againest Location B. Now the same generator code in location is maintained as of finished good (400XXXX).
Transcation is on Sale-Purchase Basis
I want to transfer the dependent requirement from location A to Location B for generator againest which it should generate planned orders.
Is it posiible? Will MPN ( Manufacturers part no.) help in this?
Thanking You..
Amol Chavan

Similar Messages

  • Reg: Vendor Mapping

    Hi !!
    Good evening.
    I am very new to CRM .
    How we can map Vendors from R/3 to CRM & CRM to R/3.
    There are only 5 classifications in CRM like-- Customer, Compitetor,Consumer, Prospect & COD Customer.
    Then how we can map.
    if it can be by T. Code --- PIVE ....
    Then where i have to run the T. Code & what are the settings I have to do for that
    Please guide me
    Thanks & Regards
    Dibya

    till now no body replied to this question & I have a limit of 10 open calls

  • Vendor mapping and password resets in EP7

    Good day,
    This is my first thread, so please bare with me.
    I'm currently faced with a challenge regarding Vendor mappings and password resets.
    We make use of EP7.0 and Netweaver 2004s for the backend. SRM version is 5.0. We map the vendors in the portal to the relevant backend systems. After setting the passwords for the vendors in the backend, we have to log in with the ID's to hard set the passwords. The vendors are set as dialog users and thus their passwords need to be reset regularly, in our case, every 30 days.
    My question is this: Is there a better way of managing the vendor mappings, like for instance making them service users which removes the need to change passwords, as from what I understand, it's actually the vendor groups that are mapped to backend users and not every user that belongs to the vendor group. The users still need to log onto the portal with their passwords.
    Any ideas are welcome.
    John

    If its One Portal User to One backend user, you can eliminate this need of password resetting by configuring Logon tickets.
    From what I understood is it that you have many portal users all mapped to a common backend user?

  • Vendor Mapping via DUNS numbers in EBP

    Hello,
    We are currently in the process of connecting to a marketplace via EBP.
    When an item is returned from the marketplace back to EBP, the unique identifer for the vendor will be the DUNS number.
    I now need to map the DUNS number that I have retrieved to the R/3 Vendor number so that a PO can be created in the R/3 system (we are using the classic scenario)
    I have entered the DUNS number in to the field LFA1 - KRAUS in R/3 and replicated the vendor back to EBP. This has the affect of populating the DUNS number on the vendor in EBP.
    I have looked around the system and cannot find away to directly map the R/3 vendor number into the shopping cart based on the DUNS number retrieved.
    In all the EBP notes and cookbooks and the like, it states that "the only EBP functionality is F4 help by DUNS number". I have taken this to mean that it is not possible to get EBP to directly map the R/3 vendor number into the shopping cart based on the DUNS number retrieved and that the BADI - "change data of purchasing documents" will have to be used in order to force the R/3 vendor number as the source into the EBP shopping cart based on another form of vendor number retrieval or mapping.
    Please could someone confirm if this is the case any help would be greatly appreciated.
    Thanks in advance
    Ket

    Hello Cristophe,
    Hope all is well. Firstly, thank you for your assistance in this matter.
    Background and Overview:
    EBP 3.0 using the classic Scenario. All shopping carts are transferred to R/3 where the PO is created and then sent to the vendor this is Historic and it will remain like this for the foreseeable future.
    In the past we had many point to point interfaces. We are now moving to the marketplace to remove these and to make use of better pricing.
    I want to configure the system so that when the shopping cart data is returned to EBP from the marketplace:
    A)All shopping cart data required is transferred to EBP and mapped accordingly
    B)Workflow is triggered based on value (this has been set up already).
    B) Once the shopping cart has been approved, the shopping cart details are transferred to R/3 and a PO is created.
    We want it so that a PO is always created. We have this in place with our existing vendors.
    Process Detail:
    We wil punchout to an external Marketplace. This has many vendors and will return Shopping cart data and items to EBP via OCI. the catalogue will return a number of fields: The pertinent ones being:
    Vendor DUNS number
    UNSPSC code
    Vendor part number
    Other Item details
    Before the shopping cart is created, I need to ensure that I map this data so that the data is complete enough and accurate enough to create a R/3 PO.
    The mapping that I need to do to do is as follows: (I think)
    A)The vendor DUNS number to a Buynet Partner number and subsequently a R/3 Vendor Number. (the r/3 and buynet vendor numbers are identical as per table VENMAP and the method of replication chosen during initial implementation). Thanks for your help regarding this. (My mistake regards the BADI.)
    B)The UNSPSC code is mapped to a SAP R/3 material number. In order to do this I also assume that we will be required to somehow map the UNSPSC code when it is returned as part of the OCI interface. Would this also be via BADI "BBP_CATALOG_TRANSFER" ?
    Please could you also let me know if there is somewhere in the system where I can see what data is being passed back from the marketplace. I have installed OSS note 487917 - Debug OCI catalogue interface, but this does not appear to give me the details of all the fields that are being transferred. Instead it only highlights those that are in error. Do I need to look at some temp tables when the BADI is triggered??
    C) all other data does not require mapping and can be passed directly as is.
    It worth pointing out that we do not want to call off any contracts or use contracts for any type of source determination. Ideally we do not want Info records either. I have managed to assign the vendor to a shopping cart without an Info record or contract. Any thoughts would be appreciated..
    So to continue the process....
    Once the PO has reached R/3, we will be using the ORDERS IDOC to send the data to Business connector. Business connector will then translate this data into an cXML order and send it via HTTPs to the marketplace. We will then retreive invoices HTTPs and process them via the Invoice IDOC.
    Thanks again
    Regards
    Ket

  • Customer, Vendor transfer to APO

    Hi,
           When we are working with non-VMI scenarios, do we need to CIF customers and vendors to APO? Somebody said we need to transfer customers to APO only in VMI scenario. is this correct? What about vendors?
    THanks.

    Depends on your scope in APO
    If you are doing scenarios where you need vendors(as in subcontracting)
    or if you have VMI or even larger customers with whom you expect to share plans with collaborative planning .... you would want to CIF them to APO
    Customers and Vendors are created as locations in APO with different location types

  • Buy 1 Get 1 Free offer to be mapped in APO DP Promotion

    Hi All,
    If any body have come across this below scenario.
    I need to promote My Product (suppose colgate paste) in the market.
    For Ex: I want to sell colgate paste of 100 Gms with Buy 1 Get 1 Free offer.
    Currently this 100gm pack is  in single box ,now i need to pack two 100 gm colgate paste in one box and want to sell this new box in the market for a particular period.
    How i will come to know that when i promote Colgate of single 100gm ,system will automatically promote  box of  two Colgate of  100gm.
    How to set up this in APO DP Promotion? Can we use Bom functionality in promotion?
    Please provide your valuable inputs.
    Jaiprakash

    Hi Jaiprakash,
    For modeling the scenario the way I described, you will have check with ERP team to first find out, as to how complex SKUs are mapped currently. This is because master data is driven by SAP ECC/ R/3 systems into APO and also the input transaction data (e.g.  Sales history) will be extracted finally through the SAP ECC / R/3 system.
    Forecasting with DP BOM
    In APO DP BOM can be created by PPM or PDS functionality and PPM will be simpler to create.
    Process flow for forecasting with DP BOM is as given in the SAP Help:
    http://help.sap.com/saphelp_SCM700_ehp01/helpdata/en/4b/dc5d8fa3e1403595b5786f57142529/frameset.htm
    Please note that sales history will be extracted from ECC/ BW for complex SKUs and also for the normal Finished SKUs.
    We have not used standard promotion planning functionality with DP BOM. We used a key figure to load the promotions and macros to do additions to the baseline forecasts created.
    You need to create an additional key figure or use any available one for loading promotions from an info cube to planning area.
    Final demand plan will be calculated by macros to additions to baseline forecasts of promotions and marketing intelligence if any.
    You need PPMs for the complex SKUs in SNP/PPDS also. There will be separate packing and processing facility for making complex SKUs from simple SKUs. 
    Demand plan will be released to SNP, for both complex SKUs and simple SKUs.
    SNP heuristics will create the supply plan and for short term, PPDS plans need to be created by converting SNP plans.
    There is possibility of subcontracting process for the complex SKUs and this also can be mapped.
    Regards
    Datta

  • How to get materials at vendor location created on APO

    Hi -
    I am working on a project to try to do some capacity planning/what if analysis on SNP for materials created at a vendor location ( contract manufacturer). We currently do not maintain master data for the capacity of these vendors but it is something that the planners know of and take into account outside of APO when trying to determine the quantities for a PO.
    We do not want to actually plan the items with PPMS, etc but are looking to at least get the materials created at the vendor location on APO. Can someone give me an idea of how we would do this via the CIF?
    Thanks for your help.

    Yes it is PPM user exit on APO side and will create when PPM is cifed from R/3.
    SMOD :APOCF012  Inbound Processing: Production Process Model
    OSS note : https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=483358
    How to do it is there in correction instructions :
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/corr_instr/correction_instructions.htm?_EVENT=CORR_OBLI&_CINSTA=0120031469&sap-language=E&_CALEID=0000331824&_CPAKID=418
    Manish
    Edited by: Manish Kumar Rathi on Oct 17, 2008 1:29 PM

  • APO vendor location number is not same as ECC vendor number.

    Hi Friends,
    I have an issue with CIFing Vendors from ECC to APO. ECC team has created Vendors ie Vendor numbers and Description.
    For Example I have vendor 10000101 in ECC and when I CIF it to APO using integration model I have no issues. The issue is when I check the CIFed vendor location exist in APO. Using 10000101 and location type 1011 if i try to search for vendor it say vendor does not exist. When I add two zeroes ie 0010000101 now I will be able to view the vendor details.  My query is I want to see the same vendor number ie ECC 10000101 (Vendor) in APO. Is there any setting that Iu2019m missing? I really appreciate if someone come up with answer.
    Regards
    KRN

    Hi Senthil ,
    Thank you for your reply. The steps you have mentioned here is for replicating the numbering format for materials. ECC<=>APO. I have  customized material numbering format using the lexicographical under SPRO>APO>Product>Output format of product number. This activity I have already done.
    My question was regarding the vendor number. When I CIF the vendor from ECC to APO. In ECC it does not have leading zeroes but when I see in APO it has leading zeroes. This is where I was wondering and want to know is there any customizing activity to replicate the same ECC vendor number in APO.
    Also I need to know if I have the leading zeroes vendor number in APO will it affect my SNP planning. Mean to say ECC without leading zeores and APO with leading zeroes.
    Regards
    KRN

  • Many Portal users mapping one R/3 user and query their own data ?

    Hi everyone :
      I want to discuss a issue as follow with all :
      Precondition : The SSO had done between Portal and R/3.
      Issue : Many Portal user(vendor) mapping one R/3 user(pulic vendor user),when they logon Portal, they can query the report, but the data was for the vendor logon now !
      Any discuss is welcome!
      Best Regards,
      Jianguo Chen

    Hi everyone :
      I want to discuss a issue as follow with all :
      Precondition : The SSO had done between Portal and R/3.
      Issue : Many Portal user(vendor) mapping one R/3 user(pulic vendor user),when they logon Portal, they can query the report, but the data was for the vendor logon now !
      Any discuss is welcome!
      Best Regards,
      Jianguo Chen

  • Vendor registration

    Hi experts
    After vendor replication from EBP to SUS an e-mail notification is sent to vendor with a URL, USER and Pass, when vendor goes to URL and do the registration and try to create an error occur, CALL FUNCTION NOR EXECUTABLE, INCORRECT PARAMETER
    Someone knows what is the solution for it?
    Thanks
    Nilson

    Hi
    Did you replicate the company code from Txn BBP_SUS_BP_ADM ? Did you see the option to replicate company code ? One you replicate the company code, it inserts a node in PPOMA_BBP. You can check the companies there. You do not maintain them directly.
    <b>See related links -></b>
    Note 361829 EBP (BBP2.0C): Business partner <-> vendor mapping
    Urgent - SUS with multiple company scenario
    Urgent - SUS with multiple company scenario
    Re: URL for vendor self registration without SUS
    Send vendor to SUS (EBP-SUS)
    Re: Vendor replication in MM-EBP-SUS Scenario
    User's vendor in SUS
    SUS - Error with duplicated company
    In SUS Link between registered User ID and Business Partner (Vendor) Number
    Re: Vendor replication to SUS
    "Business Partner Does Not Exist" SUS admin user registration
    Re: Clarifications on EBP-SUS and MM-SUS Scenario
    Hope this will definitely . Do let me know.
    Regards
    - Atul

  • Customer and Vendor Checktables Mappings Excel sheet

    Hi All,
    I found buisiness partner and vendor mapping sap excel sheets from service market place.
    but,not able to find similar document for vendor and customer repositories.
    If anyone prepared,please mail me at [email protected]
    Regards,
    Rama

    Hi Subbu,
    can you pls send the customer and vendor mapping id to my email id also...
    [email protected]
    thanks a lot!
    Jyotika

  • External BP: Mapping Purchasing Org

    In EBP, using "Manage external BP (web tcode)" we can map additional Porg to the external vendor but transaction BBP_UPDATE_PORG just take two Porg and map but there is no furter reference to external BP. What exactly this tcode does? Does it map to all the vendors?
    Thanks!
    Alok

    HI alok
    Following is the explanation
    Using the transaction BBP_UPDATE_MAPPING, Vendor Mapping - Adjust Backend, you can map backend vendors to business partners in SAP Enterprise Buyer, even if you have a heterogeneous landscape in which the different backend systems may have, for example, different numbers for the same vendor. Alternatively, you can use this transaction when changing from a test or development system to a productive system to ensure that there is no discrepancy between the two systems.
    regards,
    Nimish sheth

  • Service of Imported Parts provided to Foreign Vendor and Duties on that

    Dear Gurus,
    My Client is sending Material part (Import) ,for Service to foreign Vendor,please find the process mentioned below
    PROCESS FOR SENDING  DEFECTIVE PART OF ASSET(MACHINE) FOR REPAIRING TO OVERSEAS SUPPLIER/REPAIRER AND RECEIVING BACK INTO FACTORY AFTER REPAIRING.
    PACKAGING MACHINE
    DEFECTIVE PART IDENTIFIED
    DEPOSITED INTO STORES DEPT.
    CUSTOMS DOCUMENTATION -
     FOR CLEARANCE AND SENDING
                                                                                 TO VENDOR.
                                                                                 FREIGHT PAYABLE
                                                                                 CLEARING CHARGES PAYABLE
    MATERIAL REACHED TO REPAIRER
    AND REPAIRED.
    REPAIRED MATERIAL COMING INDIA -- IMPORT CLEARANCE.
                                                                                    FREIGHT PAYABLE
                                                                                    CUSTOMS DUTY ON REPAIRING
                                                                                    CHARGES PAYABLE.
                                                                                    CLEARING CHARGES PAYABLE
    REPAIRING CHARGES PAYABLE TO
    REPAIRER IN FOREIGN CURRENCY
    Note:
    When material going out of Indian customs process required ( say Export Process for Repairing) at that time no duty is payble but outgoing freight and Custom Clearing charges payable ( Clearing charges is payable to Clearing Agent and Freight Payable to Carrier)
    When the same material coming to India customs process required ( Say Import Process for repaired material). At that time Incoming freight is payable either directly to carrier or it may be included in the repairieru2019s Invoice. Repairing charges is payable to overseas repairer. Customs clearing charges payable to clearing agent.
    Freight / Courier charges (within India from / to Company to Port of export ) is payable to local courier / Transporters
    Will Be Very thankful to you if you can throw some light on the Duties that my client pay while the material is going out and coming in .
    Regards
    Shailesh

    Hi,
    Do the recursive subcontracting , send the same material and assign the same material as component by
    creating subcontracting PO , and pay as sun con charges to overseas vendor
    Map ,freight duty and custom in subcontracting PO as in regular PO
    Try it should help
    Diwakar

  • Vendor not intended for a puchasing org

    Hi Experts,
       While creating a SC, We are getting the following error of "Vendor xxx not intended for a puchasing org  yyyyy". We are using the EBP3.0. I will appreciate your help.
    Thanks,
    J Kumar.

    Hi
    Give more details aboit your system version and support packs. ? What error message in detail are you getting ?
    Is your user assigned to the PPOMA_BBP org structure ?
    For using BBPMAININT, you must have the required roles
    <u>Here are few links to go through -></u>
    http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
    http://help.sap.com/saphelp_srm50/helpdata/en/b8/92303fdcf66d37e10000000a11405a/frameset.htm
    Few SAP OSS Notes to check out ->
    Note 416398 External business partner: Field control incorrect
    Note 864221 EBP 4.0+: Performance location
    Note 635027 EBP business partners: Hiding screens/templates
    Note 357201 BBP 2.0B: Business partner <--> vendor mapping
    Note 308106 Collective note: manage external business partners
    Do let me know.
    Regards
    - Atul

  • CIF: Vendor transfer

    Hi All:
    I have been trying to send Vendors over to APO thru CIF, I could see a bunch but couple of them just dont get across. I tried sending them alone in a seperate Integration model I get the same message that (vendor) <b>location does not exist</b>.
    The next time I tried sending the vendors with SA's, Inforecords and contracts I get the same message. On SMQ2 in APO I get Function: /SAPAPO/CIF_TPSRC_INBOUND
    Which I tried to execute just to get a message <b>Function module does not exist or EXCEPTION raised</b>.
    Please help, have a good week ahead.
    Mono

    Mono Al
    Using transaction se38, enter RIMODINI as the program name and execute.
    You should have a selection screen for your integration models. Enter the integration model you want and execute. You should now have a list containing the models you want to re-initialise. On execution now, the full model information will be resent (rather than the delta logic).
    Hopefully your missing vendors will now come across.

Maybe you are looking for

  • I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. Mac users can no longer read the page numbers but pc users can.

    I am using CC adobe Acrobat to combine multiple pdfs and add page numbers. As of about 2 weeks ago the mac users can no longer read the page numbers they get a font error message and see only -- where the page information should be. The pc users do n

  • Having objects move in to and out of a frame (screen shots explaining)

    Hi I've got a wireframe I'm now trying to add interaction to in catalyst. I've got a drop down menu the user will work from and I want it so that when they click a button the screen in the menu slides away and a new screen slides in. Please see the v

  • Jsp-descriptor jsp-param jspCheckSeconds weblogic.xml?

    For some reason I can't get weblogic to recompile my jsp's when I change           them. I am using Weblogic 6sp1 on NT4. I place my weblogic.xml in the           d:\weblogic6.0sp1\wlserver6.0sp1\config\mydomain\applications\cam\Web-inf           dir

  • M505-4940 S/PDIF Trouble

    Hello all, Toshiba says this laptop has spdif digital audio through the headphone jack using a standard 1/8"  jack. I bought a mono rca to 1/8" adapter to connect the laptop to a receiver. When i open the realtek hd audio manager it doesnt show and d

  • Problem with max function in air

    Hello ,how are you,I write this query : [b]SELECT *, max(trackerId) FROM  sessiontracker [/b]in sqlite manager and it works ,but when I use it in Air application  ,it send me back this error: ReferenceError: Error #1056: Cannot create property max(tr